Characterizing the impact of preparation method on fullerene cluster structure and chemistry

We examined the physical and chemical characteristics of colloidal dispersions of fullerene materials (nC60) produced through several solvent exchange processes and through extended mixing in water only. The nC60 produced via the different methods were unique from each other with respect to size, morphology, charge, and hydrophobicity. The greatest dissimilarities were observed between the nC60 produced by extended mixing in water alone and the nC60 produced by solvent exchange processes. The role of the respective solvents in determining the characteristics of the various nC60 were attributed to differences in the solvent-C60 interactions and the presence of the solvent as a residual in the nC60 structure, indicating the significance of the solvent properties in determining the ultimate characteristics of the colloidal fullerene. Thus, fullerene C60 that may become mobilized through natural processes (agitation in water) may behave in dramatically different ways than those produced through more artificial means. These results highlight the difficulties in generalizing nC60 properties, particularly as they vary in potential toxicity considerations.     

Photo-induced reactive oxygen species generation by different water-soluble fullerenes (C) and their cytotoxicity in human keratinocytes

Abstract In this study we report the phototoxicity toward HaCaT keratinocytes that results from the photogeneration of superoxide and singlet oxygen ((1)O(2)) by four different "water-soluble" fullerene (C(60)) preparations-monomeric (gamma-CyD)(2)/C(60) (gamma-cyclodextrin bicapped C(60)) and three aggregated forms-THF/nC(60) (prepared by solvent exchange from THF solution); Son/nC(60) (prepared by sonication of a toluene/water mixture); and gamma-CyD/nC(60) (prepared by heating the [gamma-CyD](2)/C(60) aqueous solution). Our results demonstrate that all four C(60) preparations photogenerate (1)O(2) efficiently. However, the properties of C(60)-generated (1)O(2), including its availability for reactions in solution, are markedly different for the monomeric and aggregated forms. (1)O(2) produced by monomeric (gamma-CyD)(2)/C(60) is quenchable by NaN(3) and its quantum yield in D(2)O, which is only weakly dependent on oxygen concentration, is as high as C(60) in toluene. In contrast, (1)O(2) generated from aggregated C(60) is not quenchable by NaN(3), exhibits a solvent-independent short-lived lifetime (ca 2.9 mus), is highly sensitive to oxygen concentration while its phosphorescence is redshifted. All these features indicate that (1)O(2) is sequestered inside the C(60) aggregates, which may explain why these preparations were not phototoxic toward HaCaT cells. Electron paramagnetic resonance studies demonstrated the generation of the C(60) anion radical (C(60)(*-)) when (gamma-CyD)(2)/C(60) was irradiated (lambda > 300 nm) in the presence of a reducing agent (NADH); spin trapping experiments (lambda > 400 nm) with 5,5-dimethyl-1-pyrroline N-oxide clearly showed the generation of superoxide resulting from the reaction of C(60)(*-) with oxygen. In vitro tests with HaCaT keratinocytes provided evidence that (gamma-CyD)(2)/C(60) phototoxicity is mainly mediated by (1)O(2) (Type II mechanism) with only a minor contribution from free radicals (Type I mechanism).     

Distribution of fullerene nanomaterials between water and model biological membranes

Biological membranes are one of the important interfaces between cells and pollutants. Many polar and hydrophobic chemicals can accumulate within these membranes. For this reason, artificial biological membranes are appealing surrogates to complex organisms for assessing the bioaccumulation potential of engineered nanomaterials (ENMs). To our knowledge, this work presents the first quantitative study on the distribution of fullerene ENMs between lipid bilayers, used as model biological membranes, and water. We evaluated the lipid bilayer-water association coefficients (K(lipw)) of aqueous fullerene aggregates (nC(60)) and fullerol (C(60)(ONa)(x)(OH)(y), x + y = 24). Kinetic studies indicated that fullerol reached apparent equilibrium more rapidly than nC(60) (2 h versus >9 h). Nonlinear isotherms can describe the distribution behavior of nC(60) and fullerol. The lipid bilayer-water distributions of both nC(60) and fullerol were pH-dependent with the accumulation in lipid bilayers increasing systematically as the pH decreased from 8.6 (natural water pH) to 3 (the low end of physiologically relevant pH). This pH dependency varies with the zeta potentials of the ENMs and leads to patterns similar to those previously observed for the lipid bilayer-water distribution behavior of ionizable organic pollutants. The K(lipw) value for nC(60) was larger than that of fullerol at a given pH, indicating a greater propensity for nC(60) to interact with lipid bilayers. For example, at pH 7.4 and an aqueous concentration of 10 mg/L, K(lipw) was 3.5 times greater for nC(60) (log K(lipw) = 2.99) relative to fullerol (log K(lipw) = 2.45). Comparisons with existing aquatic organism bioaccumulation studies suggested that the lipid bilayer-water distribution is a potential method for assessing the bioaccumulation potentials of ENMs.     

Optimized solvent-exchange synthesis method for C60 colloidal dispersions

An existing solvent exchange method used to produce aqueous suspensions of fullerene C(60) aggregates (nC(60)) using the solvents toluene, tetrahydrofuran, acetone, and water, has been optimized for producing 75 nm diameter particles. Numerous synthesis parameters were evaluated for their effects on colloid yield and particle size distribution. Varying the relative volumes used of the intermediate solvents relative to the initial toluene volume allowed the controlled tuning of the resulting particle size up to a diameter of 210 nm. The resulting suspensions produced 10-20 ppm concentrations and reduced the residual organic solvents to less than the detection limit of 1 ppm.     

Synthesis of Pt/Ru bimetallic nanoparticles in high-temperature and high-pressure fluids

A high-temperature and high-pressure flow-reactor system was applied to the synthesis of monometallic ruthenium (Ru) nanoparticles and platinum/ruthenium (Pt/Ru) bimetallic nanoparticles using the thermal reduction of ruthenium ion (Ru(III)) and the mixture of platinum (Pt(IV)) and ruthenium ions in water and ethanol mixture in the presence of poly(N-vinyl-2-pyrrolidone). Monometallic Ru nanoparticles with an average diameter of ca. 2 nm were synthesized above 200 degrees C at 30 MPa. The monometallic Ru nanoparticles tended to make large aggregates in colloidal dispersions. By the reduction of the mixture solution of Pt(IV) and Ru(III) in water and ethanol above 200 degrees C at 30 MPa, Pt/Ru bimetallic nanoparticles with an average diameter of ca. 2.5 nm were synthesized with relatively small size distribution. The EXAFS spectra for the Pt/Ru bimetallic particles indicated that the particle possesses metallic bonds between Pt and Ru atoms in contrast to the case of the nanoparticles produced by thermal reduction under ambient pressure at 100 degrees C [M. Harada, N. Toshima, K. Yoshida, S. Isoda, J. Colloid Interface Sci. 283 (2005) 64], and that the Pt/Ru bimetallic particle has a Pt-core/Ru-shell structure.     

Evaluation of extraction methods for quantification of aqueous fullerenes in urine

There is a growing concern about the human and environmental health effects of fullerenes (e.g., C(60)) due to their increasing application in research, medicine, and industry. Toxicological and pharmacokinetic research requires standard methods for extraction and detection of fullerenes from biological matrices such as urine. The present study validates the use of liquid-liquid extraction (LLE) and solid-phase extraction (SPE) methods in conjunction with liquid chromatography-mass spectrometry (LC-MS) for the quantitative determination of C(60) in human and synthetic urine as compared with ultrapure water. Glacial acetic acid, which is necessary to prevent emulsions during LLE, inhibited C(60) detection by LC-MS, but this could be mitigated with evaporation. Aqueous C(60) aggregates (nC(60)) were spiked at 180 μg/L into the components of a synthetic urine recipe to determine their individual impacts on extraction and detection. Urea, creatinine, and a complex protein (i.e., gelatin) were found to impair SPE, leading to a low recovery rate of 43 ± 4% for C(60) spiked into human urine. In contrast, C(60) was consistently recovered from synthetic matrices using LLE, and recovery in human urine was 80 ± 6%. These results suggest that LLE combined with LC-MS is suitable for studying the clearance of fullerenes from the body. LLE is a robust technique that holds promise for extracting C(60) from other complex biological matrices (e.g., blood, sweat, amniotic fluid) in toxicological studies, enabling a better understanding of the behavior of fullerenes in human and animal systems and facilitating a more comprehensive risk evaluation of fullerenes.     

Solubilization of pristine fullerene by the unfolding mechanism of bovine serum albumin for cytotoxic application

A method for solubilization of pristine fullerene (C(60)) in water was proposed by directly using bovine serum albumin (BSA) as a "solubilizer" by means of the unfolding mechanism. C(60) aqueous solution with a small distribution size, excellent dispersion stability and high dispersion concentration was obtained without the use of derivatization and organic solvent.     

Solution-phase synthesis of silver nanodiscs in HPMC-matrix and simulation of UV-vis extinction spectra using DDA based method

Present investigation demonstrates a very simple seed-mediated route, using hydroxypropyl methyl cellulose (HPMC) as stabilizing agent, for the synthesis of silver nanodiscs in aqueous solution. Central to the concept of seed-mediated growth of nanoparticles is that small nanoparticle seeds serve as nucleation centres to grow nanoparticles to a desired size and shape. It is found that the additional citrate ions in the growth solution play the pivotal role in controlling the size of silver nanodiscs. Similar to the polymers in the solution, citrate ions could be likewise dynamically adsorbed on the growing silver nanoparticles and promote the two-dimensional (2D) growth of nanoparticles. Morphological, structural, and spectral changes associated with the seed-mediated growth of the nanoparticles in the presence of HPMC are characterized using UV–vis and TEM spectroscopic studies. Metal nanoparticles have received increasing attention for their peculiar capability to control local surface plasmon resonance (LSPR) when interacting with incident light waves. Extensive simulation study of the UV–vis extinction spectra of our synthesized silver nanodiscs has been carried out using discrete dipole approximation (DDA) methodology.     

Fullerol cluster formation in aqueous solutions: implications for environmental release

Here we report on the characteristics of fullerol in aqueous systems and examine those conditions that affect the physical state of fullerol in water. When dispersed in water fullerol forms polydisperse suspensions characterized by both small ( approximately 100 nm) and large associations (>500 nm). These clusters are charged with a point of zero net proton charge (PZNPC) of approximately pH 3. Though the size of fullerol clusters may be manipulated through changes in solution chemistry, principally pH, cluster formation cannot be entirely prevented through these means alone. The fullerol cluster structure is amorphous as revealed by X-ray diffraction analysis, which is in contrast to clusters of C(60) formed through dissolution in toluene and then introduced into water through sonication (SONnC(60)). The SONnC(60) clusters are crystalline with a structure similar to that of unreacted C(60) crystals.     

The preparation of Pt nanoparticles by methanol and citrate

Platinum nanoparticles of 2-3 nm average size and ca. +/-2 nm distribution can be successfully prepared by methanol reduction while using sodium citrate as the stabilizer. Sol formation was investigated by UV-visible spectroscopy and EXAFS (extended X-ray absorption fine structure spectroscopy). The formation of Pt nanoparticles was confirmed by the presence of Pt-Pt bonding in the solution after a certain induction period in methanol-reduced sol with or without citrate. The possible two-step reduction of Pt(IV) was revealed by correlating EXAFS, UV-visible spectra and pH data. The presence of citrate resulted in a smaller Pt-Pt coordination number and a slower sol formation process. All these results prove that citrate acted as the stabilizer in this synthesis.     

Limiting stability temperatures for copper sols stabilized by poly(<Emphasis Type="Italic">N</Emphasis>-vinyllactams)

It has been shown that stable copper sols cannot be prepared through the reduction of copper ions in aqueous solutions of poly(N-vinyllactams) in the presence of poly(N-vinylpyrrolidone) in the temperature range 50–70°C, while in the presence of poly(N-vinylcaprolactam), the said sols cannot be prepared at temperatures below ～12°C. This tendency is related to the thermodynamic instability of complexes formed via noncovalent interactions of copper nanoparticles with polymer macromolecules in corresponding temperature ranges. Stable sols synthesized in the presence of the above polymers at other temperatures rapidly lose stability in the said temperature ranges, and this effect is accompanied by the aggregation of metal particles. The experimental results provide evidence that there is a relationship between the stability of complexes macromolecules-metal nanoparticles and the thermodynamic quality of the solvent.     

Interactions between macromolecules and metal nanoparticles in aqueous-saline media

The influence of the concentration of low-molecular-mass salt additives in the reaction medium on the size characteristics of copper nanoparticles in sols formed through the reduction of Cu²⁺ ions in the presence of a cationic polyelectrolyte and nonionogenic polymers with hydrophilic (poly(ethylene oxide) and hydrophobic (poly(N-vinylpyrrolidone)) main chains has been studied. Formation of sols with a narrow size (diameter) distribution of metal nanoparticle indicates the pseudomatrix character of formation of the metal phase under the studied conditions. Effects of the neutral salt and its concentration in the reaction medium on the synthesis of copper sols and on the mean size of metal nanoparticles are related to a change in the nature or character (when oppositely charged polyelectrolyte macromolecules and copper nanoparticles are involved in interaction) of noncovalent interactions stabilizing the macromolecule-nanoparticle complex on passage from the salt-free aqueous medium to the aqueous-saline medium with a sufficiently high concentration of the neutral salt.     

Dispersion of ZnO Nanoparticles in a Mixture of Ethylene Glycol–Water, Exploration of Temperature-Dependent Density, and Sensitivity Analysis

Experimental studies are performed to evaluate the stability of zinc oxide (ZnO) nanoparticles suspended in a mixture of ethylene glycol and water with weight ratio of 40–60 as the base fluid. Different methods have been employed to disperse ZnO nanoparticles. It is found that using Gum Arabic leads to clustering and settle the nanoparticles. Also, the use of DI ammonium hydrogen citrate with weight ratio 1:1 (surfactant:nanoparticles) gives the acceptable stability. The density of nanofluids is measured and the results are compared with theoretical results. A helpful correlation for the measured densities of the stable nanofluids in a temperature range of 25–40 °C is presented which can used in practical applications. Finally based on the correlation a sensitivity analysis has been done. It is found that at higher temperatures the density is more sensitive to the increases in volume fraction.     

Temperature-triggered fast-disintegrating polyNIPAM particles via semicontinuous heterophase polymerisation

Crosslinker-free poly(n-isopropylacrylamide) (polyNIPAM) particles produced by conventional emulsifier-free heterophase polymerisations contain gels and do not easily and completely disintegrate in water, if at all. These particles, when cooled below lower critical solution temperature (LCST) swell first and then gradually shrink, due to their slow rate of disintegration. We first show that only particles formed using very low monomer concentration, which have a low molecular weight, are fully soluble in water. Then, we describe a seeded semicontinuous route which was designed in order to be able to maintain a low monomer concentration in water in the course of reaction and control the length and location of growing chains. Nanoparticles produced via semicontinuous approach not only disintegrated in water very quickly but also dissolved in water completely as soon as LCST was reached. This finding may also find applications in technologically important processes for dissolution of macromolecules in solvents.

NaBH4-induced assembly of immobilized Au nanoparticles into chainlike structures on a chemically modified glass surface

A facile method of obtaining chainlike assemblies of gold nanoparticles (AuNPs) on a chemically modified glass surface based on NaBH(4) treatment is developed. Citrate-stabilized AuNPs (17 nm) are immobilized on a glutaraldehyde-functionalized glass surface and assembled into chainlike structures after treatment with aqueous sodium borohydride (NaBH(4)) solution. The production and morphology of the AuNP chainlike assemblies are controlled by the density of the immobilized NPs, the concentration of NaBH(4) solution, and the treatment time. The AuNP assemblies are stable in water and can undergo drying. X-ray photoelectron spectroscopic data show that the number of citrate ions on the AuNPs decreased by 43% after treatment with 5 mg/mL NaBH(4) solution. The NaBH(4)-induced partial removal of the citrate ions and the roughness of the glass surface greatly affect the binding force of AuNPs on the substrate. The immobilized AuNPs begin to move at the solid-liquid interface without desorbing when the strength of the binding force was decreased. These mobile NPs form chainlike assemblies under the driving force of van der Waals interaction and diffusion. This interface-based formation of chainlike assemblies of AuNPs may provide a simple protocol for the 1D assembly of other Au-coated colloidal nanoparticles.     

Mass transport characteristics of alkyl amines in a water/n-decane system

Rhenium (Re) nanoparticles have been synthesized by pulsed-laser decomposition of ammonium perrhenate (NH(4)ReO(4)) or dirhenium decacarbonyl (Re(2)(CO)(10)) in the presence of 3-mercaptopropionic acid (MPA) as capping agent, in both aqueous and organic media. Preliminary studies showed that the MPA-capped Re nanoparticles are capable of catalyzing the isomerization of 10-undecen-1-ol to internal alkenols via long chain migration of the C=C double bond at ca. 200°C. A one-pot synthesis of graphite-coated Re nanoparticles has also been achieved by pulsed-laser decomposition of Re(2)(CO)(10), due to photo-induced catalytic graphitization of the phenyl groups of PPh(3) on the surface of rhenium nanoparticles.     

Mechanochemical and solution synthesis, and crystal structures and IR and solid-state (CPMAS) NMR spectroscopy of some bis(triphenylphosphine)silver(I) mono- and di-hydrogencitrate systems

The complex [(Ph(3)P)(2)Ag(H(2)cit)]·EtOH (1; H(2)cit(-) = dihydrogencitrate = C(6)H(7)O(7)(-)) contains [(Ph(3)P)(2)Ag(H(2)cit)] molecules in which the silver atom is coordinated to two PPh(3) molecules and the two oxygen atoms of one of the 'terminal'/1-carboxylate groups of the dihydrogencitrate group. The molecules form centrosymmetric hydrogen-bonded dimers in the solid. In [{(Ph(3)P)(2)Ag}(2)(Hcit)], (2), unsymmetrical deprotonation of the citrate grouping is found, from the 1- and 3- (i.e. terminal and central) carboxylates: [(Ph(3)P)(2)Ag(O(2)CCH(2)C(OH) (CH(2)COOH)CO(2))Ag(PPh(3))(2)]. The above complexes, as well as [(Ph(3)P)(3)Ag(H(2)cit)] (3) were prepared via conventional solution methods, involving the reaction of trisilver(I) citrate, citric acid and triphenylphosphine, and by a mechanochemical method involving the reaction of silver(I) oxide, citric acid and triphenylphosphine. IR studies of 1-3 show the presence of coordinated carboxylate and free carboxylic acid groups in the mono- and di-hydrogencitrate ligands, and the formation of 2 from 1 shows that dihydrogencitrate deprotonation can occur upon dissolution of 1 in protic solvents. High-field (9.40 T) (31)P CPMAS NMR spectra were recorded and analysed, yielding heteronuclear (1)J((107/109)Ag,(31)P) and homonuclear (2)J((31)P,(31)P) spin-spin coupling constants.     

Facile synthesis of high-concentration, stable aqueous dispersions of uniform silver nanoparticles using aniline as a reductant

A facile method was developed for preparing uniform silver nanoparticles with small particle sizes of less than 10 nm at high concentrations, in which aniline was used to reduce silver nitrate (AgNO(3)) to silver nanoparticles in the presence of dodecylbenzenesulfonic acid (DBSA) as a stabilizer. Upon the addition of excess NaOH to the DBSA-aniline-AgNO(3) (DAA) system, the formation of silver nanoparticles was almost complete in just 2 min at 90 °C (in 94% yield). The average size of those resultant silver nanoparticles was 8.9 ± 1.1 nm, and the colloids were stable for more than 1 year at ambient temperature. A possible mechanism for the formation of silver nanoparticles was proposed to be related to two factors: one was the mesoscopic structures of the DAA system in which silver ions were restricted in the dispersed phases composed of DBSA and aniline; the other was Ag(2)O nanocrystallites generated in situ that could be readily reduced by aniline to small silver nanoparticles at high concentrations.     

不同种类羧酸钠对草酸钙结晶过程中晶相的影响

采用X射线衍射法研究了水溶液中不同种类羧酸钠对尿结石主要成份草酸钙结晶的影响，这些羧酸钠分别为含有一、二、三和四个羧基的羟基乙酸钠（NaGly）、酒石酸钠（Na2Tart）、柠檬酸钠（Na3Cit）和EDTA二钠盐（Na2EDTA）.结果表明，随着羧酸钠浓度的增加，草酸钙的晶相均发生规律性的变化：从最稳定的一水草酸钙（COM），到不稳定的二水草酸钙（COD），最后转化为次稳定的三水草酸钙（COT）.不同结构羧酸钠抑制COM生长、促进COD生成的顺序为:Na3Cit >Na2Tart >Na2EDTA >NaGly.该结果将为临床上选择防结石药物提供新的思路.     

Ultrasonic approach for formation of erbium oxide nanoparticles with variable geometries

Ultrasound (20 kHz, 29 W·cm(-2)) is employed to form three types of erbium oxide nanoparticles in the presence of multiwalled carbon nanotubes as a template material in water. The nanoparticles are (i) erbium carboxioxide nanoparticles deposited on the external walls of multiwalled carbon nanotubes and Er(2)O(3) in the bulk with (ii) hexagonal and (iii) spherical geometries. Each type of ultrasonically formed nanoparticle reveals Er(3+) photoluminescence from crystal lattice. The main advantage of the erbium carboxioxide nanoparticles on the carbon nanotubes is the electromagnetic emission in the visible region, which is new and not examined up to the present date. On the other hand, the photoluminescence of hexagonal erbium oxide nanoparticles is long-lived (μs) and enables the higher energy transition ((4)S(3/2)-(4)I(15/2)), which is not observed for spherical nanoparticles. Our work is unique because it combines for the first time spectroscopy of Er(3+) electronic transitions in the host crystal lattices of nanoparticles with the geometry established by ultrasound in aqueous solution of carbon nanotubes employed as a template material. The work can be of great interest for "green" chemistry synthesis of photoluminescent nanoparticles in water.