小型可连续进样微流控芯片分析仪的研制

报道了一种结构简单、可连续进样的小型微流控芯片分析仪的研制。顺序注射分析系统通过芯片上制作的接口将试样连续引入芯片 ,并采用自行设计的紧凑型光纤式激光诱导荧光检测器进行检测。该仪器用于芯片毛细管电泳分离实验室合成Cy5荧光染料 ,实现了连续进样和换样。峰高RSD为 1 .9% (n=1 1 ) ,试样通量 3 5 h ;相邻试样携出 <4%。     

Preparation of luminescent Cy5 doped core-shell SFNPs and its application as a near-infrared fluorescent marker

Cy5 dye is widely used as a biomarker in the research fields of life science because of its excitation at wavelengths above 600 nm where autofluorescence of bio-matter is much reduced. However, Cy5 dye could not be encapsulate into silica directly to form stable nanoparticles by using of the traditional methods. In this paper, an improved method had been developed to prepare Cy5 dye doped core-shell silica fluorescent nanoparticles (SFNPs), employing biomolecules conjugated Cy5 as the core material and silica coating produced from the hydrolysis TEOS (tetraethyl orthosilicate) in the water-in-oil microemulsion. To obtain stable Cy5 dye doped SFNPs with core-shell structure, five kinds of biomolecules with different iso-electric point (pI) have been selected to conjugate Cy5 for preparation of core-shell SFNPs. Results demonstrated that very bright and photostable Cy5 doped core-shell SFNPs could be both prepared by use of positive polysine conjugated Cy5 or IgG conjugated Cy5 as the core material, respectively. IgG conjugated Cy5 doped core-shell SFNPs was selected as a demonstration to be characterized and applied as a near-infrared fluorescent marker in cell recognition. The results showed that Cy5 doped core-shell SFNPs prepared by conjugating with a positive biomolecules IgG as the core material were luminescent and stable. About 110 Cy5 dye molecules could be doped in one nanoparticle with size of 42 ± 5 nm. The breast cancer cells had been selectively recognized by use of the near-infrared fluorescent marker based on the Cy5-IgG doped core-shell SFNPs. And the results demonstrated that this Cy5 doped core-shell SFNPs fluorescence marker was superior to the pure Cy5 dye marker for cell recognition in photostability and detection sensitivity.     

Band broadening caused by the multiple labeling of proteins in micellar electrokinetic chromatography with diode laser-induced fluorescence detection

When a labeling reagent is used, in the determination of proteins by capillary electrophoresis with laser-induced fluorescence detection, the multiple labeling of proteins frequently occurs, which can degrade the separation efficiency. In order to understand the influence of the multiple labeling of proteins on separation efficiency, the band broadening caused by a labeling reaction between bovine serum albumin (BSA) and a cyanine fluorescent dye (Cy5) was investigated using micellar electrokinetic chromatography in conjunction with diode laser-induced fluorometry. With the aid of an internal standard, methylene blue, the height equivalent to the theoretical plate (HETP) ratio of BSA to methylene blue was used as an indicator for band broadening under optimum separation conditions. Labeling conditions, including reaction buffer pH, reaction time, and initial concentration of Cy5 to bovine serum albumin, were found to influence the HETP ratio. The separation efficiency for the labeled protein was degraded by experimental conditions employed in the labeling, which indicates an increase in the heterogeneity of the final products.     

Rapid ultraviolet monitoring of multiple psychotropic drugs with a renewable microfluidic device

A rapid method for sensitive ultraviolet detection of multiple psychotropic drugs in human plasma was developed on a low-cost and expediently fabricated hybrid microfluidic device. The device was composed of one fused-silica capillary with a sampling fracture, a poly(methyl methacrylate) board with four reservoirs, and a printed circuit board. At the optimal separation and detection conditions, the baseline separation of three kinds of psychotropic drugs including barbiturates (phenobarbital and barbital), benzodiazepines (nitrazepam, clonazepam, chlordiazepoxide, alprazolam and diazepam) and tricyclic antidepressant drugs (amitriptyline) was achieved within 200 s with separation efficiency up to 3.80 × 10(5) plates m(-1). The linear ranges for ultraviolet detection were from 2.0 to 1000.0 μg mL(-1) for chlordiazepoxide and 1.0 to 1000.0 μg mL(-1) for other seven drugs. Combining with solid-phase extraction, this novel protocol could successfully be used to screen naturally existing psychotropic drugs in a known human plasma sample. The minimum detectable concentration was down to 27 ng mL(-1) for phenobarbital spiked in plasma. This work provided a promising way to initially screen different psychotropic drugs with high resolution, rapid separation and low-cost.     

Fluorescent signal amplification of carbocyanine dyes using engineered viral nanoparticles

We report enhancement in the fluorescent signal of the carbocyanine dye Cy5 by using an engineered virus as a scaffold to attach >40 Cy5 reporter molecules at fixed locations on the viral capsid. Although cyanine dye loading is often accompanied by fluorescence quenching, our results demonstrate that organized spatial distribution of Cy5 reporter molecules on the capsid obviates this commonly encountered problem. In addition, we observe energy transfer from the virus to adducted dye molecules, resulting in a highly fluorescent viral nanoparticle. We have used this enhanced fluorescence for the detection of DNA-DNA hybridization. When compared with the most often used detection methods in a microarray-based genotyping assay for Vibrio cholerae O139, these viral nanoparticles markedly increased assay sensitivity, thus demonstrating their applicability for existing DNA microarray protocols.     

Indirect thermal lens detection for capillary electrophoresis

Thermal lens detection with a 325.0 nm He-Cd excitation laser is used for thermooptical indirect detection in combination with the capillary electrophoretic separation of organic anions. The optimization of indirect thermooptical detection is discussed. With Mordant Yellow 7 (an azo dye) chosen as a probe ion limits of detection for 1-heptane-, 1-pentane-, 1-butane-, 1-propanesulfonic, and acetic acid at a level of n × 10⁻⁷ M were achieved with a separation electrolyte containing 50 μM of the probe ion and 5 mM Tris pH 9.90. A further increase in the detection sensitivity (twofold decrease in the limit of detection ) was obtained with a separation electrolyte containing a volume fraction of 20% acetonitrile.     

Dielectric spectroscopy of bidisperse colloidal suspensions

Tuning the luminescence intensity of fluorophores using nanoparticles has shown great potential for the detection of inorganic metal ions, viruses, and proteins. The enhancement or quenching of a dye's fluorescence intensity is strongly dependent on the spatial separation of the dye from the nanoparticle surface. To extend luminescence probing from the solution platform to the solid-state platform, we explored and performed dye quenching assessment using an array format in this study. We report the distance-dependent fluorescence behavior of Au-DNA conjugates prepared by equilibrating phosphine-stabilized gold nanoparticles (AuNPs) of 10-nm size with the designed spacer ds-DNA consisting of thiol-modified target and Cy3-labeled complementary probe of different lengths (5-20 nm). The Cy3-labeled products were immobilized onto MPTMS (3-mercaptopropyltrimethoxysilane)-modified glass substrates and then excited with a 532-nm laser source. Quenching efficiency of AuNPs with increasing Au-to-dye distance was assessed using ligand exchange of the thiolated oligonucleotide by 2-mercaptoethanol (ME) to obtain free Cy3-DNA probe, thus eliminating nanoparticle effect on the dye's luminescence intensity. Effective exchange, revealed by UV-vis absorption and fluorescence profiles, was achieved in a few minutes. It was observed that fluorescence quenching of Au-DNA-Cy3 assessed using the array format was consistent with the result in solution phase for the conjugates with up to 10-nm Au-to-Cy3 separation distance.     

High-resolution DNA separation in microcapillary electrophoresis chips utilizing double-L injection techniques

An experimental and numerical investigation into the use of high-resolution injection techniques to separate DNA fragments within electrophoresis microchips is presented. The principal material transport mechanisms of electrokinetic migration, fluid flow, and diffusion are considered, and several variable-volume injection methods are discussed. A detailed analysis is provided of a double-L injection technique, which employs appropriate electrokinetic manipulations to reduce sample leakage within the microchip. The leakage effect in electroosmotic flow (EOF) is investigated using a sample composed of rhodamine B and Cy3 dye. Meanwhile, the effects of sample leakage in capillary electrophoresis (CE) separation are studied by considering the separation of 100-base pairs (bp) DNA ladders and HaeIII-digested PhiX-174 DNA samples. The present experimental and simulation results indicate that the unique injection system employed in the current microfluidic chip has the ability to replicate the functions of both the conventional cross-channel and the shift-channel injection systems. Furthermore, applying the double-L injection method to these two injection systems is shown to reduce sample leakage significantly. The proposed microfluidic chip and double-L injection technique developed in this study have an exciting potential for use in high-resolution, high-throughput biochemical analysis applications and in many other applications throughout the micrototal analysis systems field.     

新型水溶性不对称五甲川菁染料的合成、光稳定性及蛋白质的荧光标记

合成并表征了系列水溶性五甲川菁染料, 研究了其在不同溶剂中的光谱性能. 结果表明, 染料在水中的最大吸收和荧光光谱在647~665 nm波长范围内, 荧光量子产率达到0.1左右. 考察了N位取代基对染料水溶液光稳定性的影响, 结果表明, 在N原子上引入带有苯环结构和大体积的磺酸基, 可以提高染料的光稳定性. 高效液相色谱(HPLC)分析结果表明, 染料4a的N-羟基琥珀酰亚胺(NHS)活性酯标记牛血清白蛋白(BSA)的检测限为1.2×10^-8 mol/L, 与紫外检测相比, 检测灵敏度提高了近2个数量级.     

Separation of carboxylic acids in human serum by isotachophoresis using a commercial field-deployable analytical platform combined with in-house glass microfluidic chips

Portable and field deployable analytical instruments are attractive in many fields including medical diagnostics, where point of care and on-site diagnostics systems capable of providing rapid quantitative results have the potential to vastly improve the productivity and the quality of medical care. Isotachophoresis (ITP) is a well known electrophoretic separation technique previously demonstrated as suitable for miniaturization in microfluidic chip format (chip-ITP). In this work, a purpose-designed ITP chip compatible with a commercial end-used targeted microfluidic system was used to study different injection protocols and to evaluate the effect of the length of the separation channel on the analytical performance. The in-house ITP chips were made from Corning glass and compared to the commercial DNA chip for the ITP separation of anions from the hydrodynamic injection of human serum. Using the in-house ITP chip the isotachophoretic step of lactate from human serum was approximately two times longer. The results of this research suggested that microfluidic ITP with indirect fluorescence detection is a viable technique for separation of organic acids in human serum samples, especially when a chip with suitable design is used.     

The identification of flunitrazepam and its metabolites in urines samples

A thin-layer chromatographic method with fluorescence detection is described for the identification of flunitrazepam and its metabolites in urine. The method is based on the hydrolysis and subsequent formation of acridine derivatives by cyclization in dimethylformamide and is selective for benzodiazepines with a 2-fluorophenyl group. The method is applicable to urine samples even after an oral dose of only 2 mg of flunitrazepam. Flunitrazepam and flurazepam consumption can be distinguished.     

Development of an integrated microfluidic platform for dynamic oxygen sensing and delivery in a flowing medium

This paper describes a platform for real-time sensing of dissolved oxygen in a flowing microfluidic environment using an oxygen-sensitive luminescent dye (platinum octaethylporphyrin ketone) integrated into a micro-oxygenator device. Using a phase-based detection method, the luminescent decay lifetime of the dye was consistent with the linear Stern-Volmer relationship using both gaseous and aqueous samples. Maximum sensor resolution varied between 120-780 ppb across a range of dissolved oxygen (DO) concentrations ranging from 0-42.5 ppm. The sensor was subsequently used to determine the convective mass-transfer characteristics of a multi-layer polydimethylsiloxane (PDMS) microfluidic oxygenator. The membrane-based oxygenator showed excellent agreement with an analytical convection model, and the integrated oxygen sensor was accurate across a wide range of tested flow rates (0.05-5 mL min(-1)). The device is unique for its ease of fabrication and highly flexible configuration, as well as the novel incorporation of oxygen delivery and detection in a single micro-device. Potential applications include tissue engineering, cell culturing, and miniaturized bio-assays that require the delivery and/or detection of precise quantities of oxygen within a microfluidic construct.     

Cyanine dye-based chromofluorescent probe for highly sensitive and selective detection of cyanide in water

Cyanine dye Cy5 was used to be a probe for highly selective detection of trace cyanide in water by using a convenient two-phase strategy. The detection limit of both the fluorescent and colorimetric assay for cyanide is below 1.9 μM, the maximal allowance level for drinking water set by the World Health Organization.     

Determination of dye/protein ratios in a labeling reaction between a cyanine dye and bovine serum albumin by micellar electrokinetic chromatography using a diode laser-induced fluorescence detection

The degree of labeling, i.e., dye/protein ratio (D/P) is important for characterizing properties of dye labeling with proteins. A method for the determination of this ratio between a fluorescent cyanine dye and bovine serum albumin (BSA), based on the separation of the labeling mixture using micellar electrokinetic chromatography with diode laser-induced fluorescence detection, is described. Two methods for the determination of D/P were examined in this study. In these methods, a hydrolysis product and impurities, which are usually unfavorable compounds that are best excluded for protein analysis, were utilized to determine the amounts of dye bound to BSA. One is a direct method in which a ratio of the peak area of BSA to the total peak area of all the products produced in the labeling reaction was used for determining the average number of dye molecules bound to a single BSA molecule. The other is an indirect determination, which is based on diminution of all peak areas related to the products except for the labeled BSA. These methods were directly compared by means of a spectrophotometric method. The experimental results show that the indirect method is both reliable and sensitive. Therefore, D/P values can be determined at trace levels using the indirect method.     

Highly sensitive double-fluorescent dye staining on microchip electrophoresis for analysis of milk proteins

We demonstrated a highly sensitive double-fluorescent dye staining in microchip electrophoresis (ME) for analysis of milk proteins. The detection sensitivity of ME was very limited so far and needed improvement. Our staining method consisted of two steps. First, in sample preparation before electrophoresis, protein was covalently bound to an amine-reactive fluorescent dye, Cy5. Then, the Cy5-attached protein was denatured with SDS and was further stained, during electrophoresis, with Agilent fluorescent dye, which was noncovalently attached to hydrophobic regions of the SDS-protein complexes. This double-fluorescent staining enhanced fluorescent intensity and lowered the detection limit to 200 pg of protein. This provided higher sensitivity than silver- or SYPRO Ruby-staining methods, which have previously given the highest sensitivity in protein staining. In addition, we applied our staining method to analysis of milk proteins and achieved their successful detection, whereas it was difficult to analyze them by the unimproved method.     

Homogeneous time-resolved fluoroimmunoassay of bensulfuron-methyl by using terbium fluorescence energy transfer

A sensitive homogenous time-resolved fluoroimmunoassay (TR-FIA) method for bensulfuron-methyl (BSM) based on fluorescence resonance energy transfer (FRET) from a Tb(3+) fluorescent chelate with N,N,N('),N(')-[2,6-bis(3'-aminomethyl-1'-pyrazoly)-4-phenylpyridine] tetrakis(acetic acid) (BPTA-Tb(3+)) to organic dye, Cy3 or Cy3.5 has been developed. New method combined the use of BPTA-Tb(3+) labeled streptavidin, Cy3 or Cy3.5 labeled anti-BSM monoclonal antibody and biotinylated BSM-BSA conjugate (BSA is bovine serum albumin) for competitive-type immunoassay. After BPTA-Tb(3+) labeled streptavidin was reacted with a competitive immune reaction solution containing biotinylated BSM-BSA, BSM sample and Cy3 or Cy3.5 labeled anti-BSM monoclonal antibody, the sensitized and long-lived emission of Cy3 or Cy3.5 derived from FRET was measured, and thus the concentration of BSM in sample was calculated. The present method has the advantages of rapidity, simplicity and high sensitivity since the B/F (bound reagent/free reagent) separation steps and the solid-phase carrier are not necessary. The method gives the detection limit of 2.10 ngml(-1). The coefficient variations of the method are less than 1.5% and the recoveries are in the range of 95-105% for BSM water sample measurement.     

Simultaneous and ultrasensitive detection of multiple microRNAs by single-molecule fluorescence imaging

Cell status changes are typically accompanied by the simultaneous changes of multiple microRNA (miRNA) levels. Thus, simultaneous and ultrasensitive detection of multiple miRNA biomarkers shows great promise in early cancer diagnosis. Herein, a facile single-molecule fluorescence imaging assay was proposed for the simultaneous and ultrasensitive detection of multiple miRNAs using only one capture anti-DNA/RNA antibody (S9.6 antibody). Two complementary DNAs (cDNAs) designed to hybridize with miRNA-21 and miRNA-122 were labelled with Cy3 (cDNA1) and Cy5 (cDNA2) dyes at their 5′-ends, respectively. After hybridization, both miRNA-21/cDNA1 and miRNA-122/cDNA2 complexes were captured by S9.6 antibodies pre-modified on a coverslip surface. Subsequently, the Cy3 and Cy5 dyes on the coverslip surface were imaged by the single-molecule fluorescence setup. The amount of miRNA-21 and miRNA-122 was quantified by counting the image spots from the Cy3 and Cy5 dye molecules in the green and red channels, respectively. The proposed assay displayed high specificity and sensitivity for singlet miRNA detection both with a detection limit of 5 fM and for multiple miRNA detection both with a detection limit of 20 fM. Moreover, it was also demonstrated that the assay could be used to detect multiple miRNAs simultaneously in human hepatocellular cancer cells (HepG2 cells). The proposed assay provides a novel biosensing platform for the ultrasensitive and simple detection of multiple miRNA expressions and shows great prospects for early cancer diagnosis.

A single-molecule assay for multiple microRNA detection.     

Fluorescence properties and photophysics of the sulfoindocyanine Cy3 linked covalently to DNA

The sulfoindocyanine Cy3 is one of the most commonly used fluorescent dyes in the investigation of the structure and dynamics of nucleic acids by means of fluorescence methods. In this work, we report the fluorescence and photophysical properties of Cy3 attached covalently to single-stranded and duplex DNA. Steady-state and time-resolved fluorescence techniques were used to determine fluorescence quantum yields, emission lifetimes, and fluorescence anisotropy decays. The existence of a transient photoisomer was investigated by means of transient absorption techniques. The fluorescence quantum yield of Cy3 is highest when attached to the 5' terminus of single-stranded DNA (Cy3-5' ssDNA), and decreases by a factor of 2.4 when the complementary strand is annealed to form duplex DNA (Cy3-5' dsDNA). Substantial differences were also observed between the 5'-modified strands and strands modified through an internal amino-modified deoxy uridine. The fluorescence decay of Cy3 became multiexponential upon conjugation to DNA. The longest lifetime was observed for Cy3-5' ssDNA, where about 50% of the decay is dominated by a 2.0-ns lifetime. This value is more than 10 times larger than the fluorescence lifetime of the free dye in solution. These observations are interpreted in terms of a model where the molecule undergoes a trans-cis isomerization reaction from the first excited state. We observed that the activation energy for photoisomerization depends strongly on the microenvironment in which the dye is located. The unusually high activation energy measured for Cy3-5' ssDNA is an indication of dye-ssDNA interactions. In fact, the time-resolved fluorescence anisotropy decay of this sample is dominated by a 2.5-ns rotational correlation time, which evidences the lack of rotational freedom of the dye around the linker that separates it from the terminal 5' phosphate. The remarkable variations in the photophysical properties of Cy3-DNA constructs demonstrate that caution should be used when Cy3 is used in studies employing DNA conjugates.     

The detection of various opiates and benzodiazepines by comprehensive two‐dimensional gas chromatography/time‐of‐flight mass spectrometry

A technique using comprehensive two‐dimensional gas chromatography/time‐of‐flight mass spectrometry (GC × GC/TOFMS) is applied to qualitative and quantitative drug testing. Human serum was ‘spiked’ with known quantities of benzodiazepines and a ‘street heroin’ mixture including some of the major metabolites and impurities. The sample components were extracted from the matrix by solid‐phase extraction (SPE). Constituents containing polar hydroxyl and/or secondary amine groups were derivatised with N‐methyl‐N‐(tert‐butyldimethyl)trifluoroacetamide (MTBSTFA) to improve the chromatographic performance. An orthogonal separation of the matrix constituents was achieved by coupling a DB‐5ms (5% phenyl) to a BPX50 (50% phenyl) GC column. The eluant was focused onto the second column by a twin‐stage cryo‐modulator. Rapid 6 s modulation times were achieved by transfer from a 30 m × 0.25 mm (length × internal diameter) to a 2 m × 0.1 mm column. TOFMS with rapid spectral acquisition (≤500 spectra/s) was employed in the mass range m/z 40–650. A clean mass spectrum was obtained for each analyte using mass spectral deconvolution software. The sensitivity and repeatability of the method were evaluated by the preparation of calibration standards for two benzodiazepines, flunitrazepam and its major metabolite 7‐aminoflunitrazepam (7‐amino‐FN), in the concentration range 5–1000 ng/mL. The limits of detection (LODs) and limits of quantitation (LOQs), calculated by repeat injections (×10) of the lowest standard, were 1.6 and 5.4 ng/mL (flunitrazepam); 2.5 and 8.5 ng/mL (7‐amino‐FN), respectively. There is scope to extend this protocol to screen a large number of drugs and metabolites stored in a library database. Copyright © 2009 John Wiley & Sons, Ltd.     

Microchip Separation and Electrochemical Detection of Amino Acids and Peptides Following Precolumn Derivatization with Naphthalene‐2,3‐dicarboxyaldehyde

An integrated microfluidic device is used to derivatize, separate, and amperometrically detect amino acids and peptides in the presence of naphthalene‐2,3‐dicarboxyaldehyde (NDA). The integrated system offers a rapid (4 min) simultaneous measurements of 5 amino acids (Arg, Lys, Gly, Cys, PhenA) down to the 3.2 μM level in connection to a precolumn reaction chamber, an electrophoretic separation channel, and an end‐column thick‐film carbon‐electrode detector. The effect of the separation voltage, detection potential, reagent concentration, and other variables on the response is examined. Calibration and precision experiments indicate a linear and reproducible response. Applicability for the separation and detection of small peptides is demonstrated. Such on‐chip generation of electroactive products offers great promise for detecting other nonelectroactive analytes.