Osmotic Coefficients of Aqueous Solutions of Some Poly(oxyethylene) Glycols at the Freezing Point of Solution

The freezing temperatures of dilute aqueous solutions of some poly(oxyethylene) glycols (PEG, HO–(CH₂CH₂O) _n –H, n varying from 4 to 117) were measured over a solute to solvent mass ratio from 0.0100 to 0.3900. The second and third osmotic virial coefficient (A ₂₂ and A ₂₂₂) of poly(oxyethylene) glycols in aqueous solution were determined. The molecular weight dependence of the second virial coefficient can be described by a simple relation A ₂₂=2×10^–5 M _n ^1.86, and the third virial coefficient is A ₂₂₂=0.038A ₂₂ ². The activity coefficients of the solute were calculated using the Gibbs-Duhem equation as applied by Bjerrum. From the osmotic and activity coefficients the excess Gibbs energies of solution, as well as the respective partial molar functions of solute and solvent and the virial pair interaction coefficients for the excess Gibbs energies were estimated. The second and the third osmotic virial coefficients are correlated with the Mc-Millan-Mayer virial coefficients.     

Water Activities and Osmotic and Activity Coefficients of Aqueous Solutions of Nitrates at 25°C by the Hygrometric Method

The thermodynamic properties of LiNO₃(aq.), NaNO₃(aq.), KNO₃(aq.), NH₄NO₃(aq.), Mg(NO₃)₂(aq.), Ca(NO₃)₂(aq.), and Ba(NO₃)₂(aq.) have been determined at 25°C by the hygrometric method for molalities, ranging from 0.1 mol-kg^–1 to saturation. From measurements of droplet diameters of reference solutions NaCl(aq.) or LiCl(aq.), the dependence of relative humidity on solute concentration was determined. The data on the relative humidity allow deduction of water activities and the osmotic coefficients at various molalities. Osmotic coefficient data are described by Pitzer's ion interaction model. The ion interaction parameters were also determined for each of the salts studied. With these parameters, the solute activity coefficients can be predicted. These results are used to calculate the excess Gibbs energy for these aqueous electrolyte nitrates. Our present results are compared with published thermodynamic data.     

Isopiestic Measurement of the Osmotic Coefficients of Aqueous {xH 2 SO 4 + (1− x)Fe 2 (SO 4 ) 3 } Solutions at 298.15 and 323.15 K

This study measures the osmotic coefficients of {xH₂SO₄ + (1−x)Fe₂(SO₄)₃}(aq) solutions at 298.15 and 323.15 K that have ionic strengths as great as 19.3 mol,kg⁻¹, using the isopiestic method. Experiments utilized both aqueous NaCl and H₂SO₄ as reference solutions. Equilibrium values of the osmotic coefficient obtained using the two different reference solutions were in satisfactory internal agreement. The solutions follow generally the Zdanovskii empirical linear relationship and yield values of a _w for the Fe₂(SO₄)₃–H₂O binary system at 298.15 K that are in good agreement with recent work and are consistent with other M₂(SO₄)₃–H₂O binary systems.     

Raman spectroscopic study of temperature dependence of water structure in aqueous solutions of a poly(oxyethylene) surfactant

The temperature dependence of the water structure in aqueous solutions of a poly(oxyethylene) surfactant C₁₂E₅ was examined at concentrations 0, 20, 30, 45, 70 and 90 wt% by Raman spectroscopy of the O–H stretching band. The ratio of the intensities of the component around 3200 cm⁻¹ (the collective in-phase O–H stretching vibrations of bonded aggregates) to the component around 3400 cm⁻¹ (the O–H stretches in which the phase relations are lost) was monitored in the temperature range from 0 to 39 °C. The results show that the speed of the thermal destruction of the H-bond network increases as the concentration increases from 0 to 45 wt%. This change is attributed to the existence of a substantial amount of water in the system that takes part in the hydrophobic hydration of the poly(oxyethylene) headgroups, despite their predominantly hydrophilic character. The conclusion that this kind of water, which is known to have restricted mobility, plays an important role in the surfactant–water systems is consistent with the high viscosity of the liquid crystalline phases.     

Semifluorinated side group poly(oxyethylene) derivatives having extremely low surface energy: Synthesis, characterization, and surface properties

Poly[oxy[[2-(perfluorooctyl)ethyl]thiomethyl]ethylene]s (H2F8TP-Xs, where X is mole% of perfluorooctyl groups in the side chain) with different levels of conversion were synthesized using polymer analogous reactions from poly[oxy(chloromethyl)ethylene] and 2-perfluorooctyl ethane thioacetate. H2F8TP-20, 41, 64, and 85 were obtained by changing the poly[oxy(chloromethyl)ethylene] to 2-perfluorooctyl ethane thioacetate mole ratio in the reaction from 0.35 to 1.50. H2F8TP-85 (85% conversion) was found to have an extremely low surface energy of 6.2 mN/m at room temperature, which was attributed to the highly ordered perfluorinated alkyl groups on the surface as a result of phase separation between the perfluorinated side chain part and the hydrogenated flexible backbone. The films of the polymers were characterized by electron spectroscopy for chemical analysis (ESCA) and near edge X-ray absorption fine structure (NEXAFS).     

用SAXS/WAXS研究聚氧乙烯/聚氧丁烯嵌段共聚物在n-己烷中的结晶性球形胶束结构

嵌段共聚物在选择性溶剂中能够自组装形成胶束,胶束的不同形状与嵌段共聚物的结构、溶剂和浓度有关．无定形嵌段共聚物通常形成球形胶束,在某些情况下也可以形成其它形状的胶束,关于结晶性嵌段共聚物在无定形链段选择性溶剂中的胶束结构和形状的报道非常少．由于结晶和相似相溶两种作用力的竞争,使得这类胶束的形状丰富多变．通常结晶作用较强时,结晶性嵌段共聚物形成片状的胶束,当结晶组分比较少时,可形成棒状胶束,尽管理论上已经指出存在球形胶束,但尚无关于这方面的报道。     

The mechanism of fluidization of concentrated calcium carbonate slurries by poly(oxyethylene) diphosphonates

Nonionic poly(oxyethylene) polymers having a diphosphonate group at one chain end strongly adsorb onto CaCO₃ particles. The main consequence is a considerable lowering of the viscosity of concentrated slurries. This effect occurs because of the break up and redispersion of aggregates of flocculated CaCO₃ particles by the polymer adsorption. The mechanism of colloidal stabilization is steric, the particles becoming uncharged as the polymer adsorbs at their surface. As a consequence, the colloidal suspensions remain stable and fluid at high volume fractions and at high ionic strengths. On the other hand, because of the strong affinity of these polymers for CaCO₃ surfaces, the larger part of the polymer is adsorbed until the coverage of the particles reaches completion. The easy to handle polymer-to-solid weight ratio can then be used as a formulation parameter. The depletion flocculation by the nonadsorbed polymer is avoided. Received: 12 March 1999 Accepted in revised form: 2 July 1999     

Thermodynamic properties of the system NH4NO3 + (NH4)2SO4 + H2O at 298.15 K

In this investigation, the mixed aqueous electrolyte system of nitrate and sulfate with common ammonium cation has been studied with the hygrometric method at the temperature 298.15 K. The water activities of the system [yNH₄NO₃ + (1 − y)(NH₄)₂SO₄](aq) are measured at total molalities from 0.4 mol kg⁻¹ up to saturation for different ionic-strength fractions y of NH₄NO₃ with y = 0.2, 0.5 and 0.8. The obtained data allow the deduction of osmotic coefficients. The experimental results are compared with the predictions of the Zdanovskii–Stokes–Robinson (ZSR), Leitzke and Stoughton (LSII), Kusik and Meissner (KM), and Pitzer models. From these measurements, new Pitzer mixing ionic parameters are determined and used to predict the solute activity coefficients in the mixture. The obtained results are used to calculate the excess Gibbs energy at total molalities for different ionic-strength fractions y.     

Reversible melting of high molar mass poly(oxyethylene)

The heat capacity, C_p, of poly(oxyethylene), POE, with a molar mass of 900,000 Da, was analyzed by temperature-modulated differential scanning calorimetry, TMDSC. The high molar mass POE crystals are in a folded-chain macroconformation and show some locally reversible melting, starting already at about 250 K. At 335 K the thermodynamic heat capacity reaches the level of the melt. The end of melting of a high-crystallinity sample was analyzed quasi-isothermally with varying modulation amplitudes from 0.2 to 3.0 K to study the reversible crystallinity. A new internal calibration method was developed which allows to quantitatively assess small fractions of reversibly melting crystals in the presence of the reversible heat capacity and large amounts of irreversible melting. The specific reversibility decreases to small values in the vicinity of the end of melting, but does not seem to go to zero. The reversible melting is close to symmetric with a small fraction crystallizing slower than melting, i.e., under the chosen condition some of the melting and crystallization remains reversing. The collected data behave as one expects for a crystallization governed by molecular nucleation and not as one would expect from the formation of an intermediate mesophase on crystallization. The method developed allows a study of the active surface of melting and crystallization of flexible macromolecules.     

Activity and Osmotic Coefficients from the Emf of Liquid Membrane Cells. X. Tris(Ethylenediamine) Cobalt(III) Nitrate, Perchlorate, and Chloride

Activity coefficients of [Co(en)₃](NO₃)₃ and [Co(en)₃](ClO₄)₃, to be compared with [Co(en)₃]Cl₃ and the corresponding lanthanum salts previously studied, are determined. [Co(en)₃]Cl₃ data are revised. Ion interaction strengths vary in the same order found for La³⁺, i.e., as if nitrate and perchlorate ions were of smaller and larger size, respectively, than chloride ions; however, the differences are much smaller than in lanthanum salts. Tris(ethylenediamine)cobalt III and lanthanum nitrate, chloride, and perchlorate—like the corresponding hexacyanoferrate(III) and hexacyanocobaltate(III) salts, but contrary to sulfate salts—behave as if [Co(en)₃]³⁺ were smaller in size than La³⁺. In the dilute regions, [Co(en)₃](NO₃)₃ displays negative deviations from the limiting slope, a kind of behavior typical for 2:2, 2:3, 3:2, and 3:3 electrolytes, but unnoticed earlier for 3:1 or 1:3 electrolytes. Pitzer's equation parameters able to provide accurate activity and osmotic coefficients for [Co(en)₃](NO₃)₃, [Co(en)₃](ClO₄)₃, and, revised, [Co(en)₃]Cl₃ are reported.     

Apparent Specific Polarization and Dipole Moment of Some Poly(oxyethylene) Glycols in 1,4-Dioxane and Benzene Solutions at 298.15?K

The electrical permittivity of 1,4-dioxane and benzene solutions of some poly(oxyethylene) glycols up to the average molecular weight of 1590 were measured at 298.15 K. From the experimental data the limiting apparent specific polarization and partial molar polarization were calculated. The electrical dipole moment of the investigated solutes was estimated according to the Debye, Onsager, and Kirkwood theoretical approaches. The calculated dipole moments increase linearly with the square root of the number of monomeric units. The group dipole moment of the polar monomeric unit was calculated from the corresponding limiting partial molar volume, the refraction and polarization of the solute. The factor g, which takes into account the degree of flexibility of the chain, was estimated and found to be greater than 0.92, which means that the lower members of the poly(oxyethylene) glycols possess almost free rotation within the chain backbone of polymer.     

稀水溶液中聚乙烯吡咯烷酮构象行为的荧光研究

以苊烯(ACE)为荧光标记物,8-苯胺基-萘磺酸(ANS)为荧光探针,利用荧光各向异性、荧光猝灭以及非辐射能量转移等静态荧光技术研究了聚乙烯吡咯烷酮(PVP)在稀水溶液中的构象行为.结果表明,PVP在稀水溶液中呈松散自由线团构象,这种构象不随溶液pH的变化而显著变化.不同于其它水溶性高分子,PVP有很强的氢键形成能力,易与具有活泼氢的其它高分子或小分子相结合,并易被金属氧化物类吸附剂吸附.因此PVP可被用来修饰某些具有疏水结构的水溶性高分子.PVP水溶液在pH=7以上相当稳定,放置1周性质没有显著变化.     

Isopiestic determination of the osmotic and activity coefficients of aqueous Lu2(SO4)3 at 25°C

Osmotic coefficients have been measured for aqueous Lu₂(SO₄)₃ solutions from 0.12402 to 0.89631 mol-kg^–1 at 25°C by use of the isopiestic method; these measurements extend into the supersaturated molality region. Since there was a lack of activity data for Lu₂(SO₄)₃ solutions at lower molalities, they were approximated by equating them to results for La₂(SO₄)₃ from freezing temperature depression measurements. The combined osmotic coefficients were then used to derive mean molal activity coefficients for Lu₂(SO₄)₃ solutions. The osmotic coefficients decrease to 0.307 as their minimum value and the mean molal activity coefficients decrease to 0.0069. When these activities were combined with our previously reported solubility of 0.6260±0.0017 mol-kg^–1 for Lu₂(SO₄)₃·8H₂O, a thermodynamic solubility product of 2.3×10^–10 was obtained. This value yields the Gibbs energy of formation G _f ^° (Lu₂(SO₄)₃·8H₂O, cr)=–5518.9±16.4 kJ-mol^–1.     

聚氧化乙烯水溶液粘度的测定

测定了不同分子量聚氧化乙烯(PEO)在水溶液中的粘度，发现在低浓度区高分子溶液比浓粘度出现负偏离。用高分子溶液流过时间对浓度作图的外推值t0^*重新计算相对粘度，则高分子溶液比浓粘度与浓度之间满足线性关系。不同分子量PEO水溶液流过时间对浓度作图的外推值t0^*是完全一致的。利用纯溶剂在粘度计中流过时间的改变确定了高分子在毛细管管壁上吸附层的厚度，发现PEO在毛细管管壁上吸附层厚度与分子量无关。     

Tandem synthesis of silver nanoparticles and nanorods in the presence of poly(oxyethylene)-amidoacid template

Sequential formation of silver nanoparticles (AgNPs) and nanorods from the reduction of AgNO₃ was affected by a poly(oxyethylene)-amidoacid (POE-amidoacid) in aqueous solution. The requisite POE-amidoacid, consisting of –(CH₂CH₂O)_n– segments with amide and carboxyl groups, was simply prepared via amidation with trimellitic anhydride of a poly(oxyethylene)-monoamine (POE-amine) of molecular weight (M_w) ∼2000 g/mol. The POE-amidoacid afforded AgNPs as small as 5 nm in diameter, which gradually (over a period of months) self-assembled into nanorods that were 10–15 nm in width and 30–50 nm in length. The hierarchical formation of Ag species occurred only at ambient temperature, but Ag aggregates formed above 50 °C. The process could be monitored by UV absorption at 420 and 380 nm for AgNPs and nanorods, respectively, and by transmission electron microscopy (TEM) for the nanorods. Fourier transform infrared (FTIR) and tapping-mode atomic force microscopy (TM-AFM) analyses revealed that the structurally tailored POE-amidoacid was indeed multifunctional: it reduced Ag⁺, stabilized the obtained Ag⁰ species, and served as a template for the tandem formation of AgNPs and nanorods.     

Effect of oxyethylene groups on the behaviour of thermodynamic properties of pyrrolidin-2-one and poly(ethylene glycols)

Dilatometric measurements of excess volume V^E and ultrasonic speed u have been carried out for mixtures of mono-, di-, tri- and tetra(ethylene glycol)s in pyrrolidin-2-one (PY) over the whole mole fraction range at 303.15 K. In the mixture of PY and monoethylene glycol, the V^E is positive except for slight negative variation at the high mole fraction of PY. The other three mixtures PY + di-, + tri- and + tetra(ethylene glycol)s show negative V^E over the entire composition range in the order di-u with increase in the mole fraction of PY in the case of monoethylene glycol while for other three systems u rises. From these measurements, partial molar quantities V_i^E and K_S,i^E have been calculated and analysed. Estimates of isentropic molar quantity K_S equal to −(∂V/∂p)_S and its excess counterpart K_S^E have also been computed. The K_S^E is positive for mono-, and negative for all the other mixtures over the whole composition range.     

Synthesis of poly(oxyethylene phosphonate)s bearing oxirane groups in the side chain

The interaction between poly(oxyethylene phosphonate)s and 1,2-epoxy-7-octene has been investigated. It has been established that in the presence of benzoyl peroxide there proceeds a selective addition of the P( )H group to the C()C double bond. Poly(oxyethylene phosphonate)s bearing oxirane groups in the side chain have been synthesized. The new polymers can be used as polymer carriers of drugs. © 1997 John Wiley & Sons, Inc.