The reaction of tetrakis(dimethylamido)titanium with self-assembled alkyltrichlorosilane monolayers possessing -OH, -NH2, and -CH3 terminal groups

The reactions of tetrakis(dimethylamido)titanium, Ti[N(CH(3))(2)](4), with alkyltrichlorosilane self-assembled monolayers (SAMs) terminated by -OH, -NH(2), and -CH(3) groups have been investigated with X-ray photoelectron spectroscopy (XPS). For comparison, a chemically oxidized Si surface, which serves as the starting point for formation of the SAMs, has also been investigated. In this work, we examined the kinetics of adsorption, the spatial extent, and stoichiometry of the reaction. Chemically oxidized Si has been found to be the most reactive surface examined here, followed by the -OH, -NH(2), and -CH(3) terminated SAMs, in that order. On all surfaces, the reaction of Ti[N(CH(3))(2)](4) was relatively facile, as evidenced by a rather weak dependence of the initial reaction probability on substrate temperature (T(s) = -50 to 110 degrees C), and adsorption could be described by first-order Langmuirian kinetics. The use of angle-resolved XPS demonstrated clearly that the anomalous reactivity of the -CH(3) terminated SAM could be attributed to reaction of Ti[N(CH(3))(2)](4) at the SAM/SiO(2) interface. Reaction on the -NH(2) terminated SAM proved to be the "cleanest", where essentially all of the reactivity could be associated with the terminal amine group. In this case, we found that approximately one Ti[N(CH(3))(2)](4) adsorbed per two SAM molecules. On all surfaces, there was significant loss of the N(CH(3))(2) ligand, particularly at high substrate temperatures, T(s) = 110 degrees C. These results show for the first time that it is possible to attach a transition metal coordination complex from the vapor phase to a surface with an appropriately functionalized self-assembled monolayer.     

A supersonic molecular beam study of the reaction of tetrakis(dimethylamido)titanium with self-assembled alkyltrichlorosilane monolayers

The reaction of a transition metal coordination complex, Ti[N(CH(3))(2)](4), with self-assembled monolayers (SAMs) possessing-OH, -NH(2), and -CH(3) terminations has been examined using supersonic molecular beam techniques. The emphasis here is on how the reaction probability varies with incident kinetic energy (E(i)=0.4-2.07 eV) and angle of incidence (theta(i)=0 degrees -60 degrees ). The most reactive surface is the substrate underlying the SAMs-SiO(2) with a high density of -OH(a) (>5 x 10(14) cm(-2)), "chemical oxide." On chemical oxide, the dynamics of adsorption are well described by trapping, precursor-mediated adsorption, and the initial probability of adsorption depends only weakly on E(i) and theta(i). The dependence of the reaction probability on substrate temperature is well described by a model involving an intrinsic precursor state, where the barrier for dissociation is approximately 0.2-0.5 eV below the vacuum level. Reaction with the SAMs is more complicated. On the SAM with the unreactive, -CH(3), termination, reactivity decreases continuously with increasing E(i) while increasing with increasing theta(i). The data are best interpreted by a model where the Ti[N(CH(3))(2)](4) must first be trapped on the surface, followed by diffusion through the SAM and reaction at the SAMSiO(2) interface with residual -OH(a). This process is not activated by E(i) and most likely occurs in defective areas of the SAM. On the SAMs with reactive end groups, the situation is quite different. On both the-OH and -NH(2) SAMs, the reaction with the Ti[N(CH(3))(2)](4) as a function of E(i) passes through a minimum near E(i) approximately 1.0 eV. Two explanations for this intriguing finding are made-one involves the participation of a direct dissociation channel at sufficiently high E(i). A second explanation involves a new mechanism for trapping, which could be termed penetration facilitated trapping, where the Ti[N(CH(3))(2)](4) penetrates the near surface layers, a process that is activated as the molecules in the SAM must be displaced from their equilibrium positions.     

In-situ characterization of self-assembled monolayers of water-soluble oligo(ethylene oxide) compounds

In-situ spectroscopic ellipsometry (SE) was utilized to examine the formation of the self-assembled monolayers (SAMs) of the water-soluble oligo(ethylene oxide) [OEO] disulfide [S(CH(2)CH(2)O)(6)CH(3)](2) {[S(EO)(6)](2)} and two analogous thiols - HS(CH(2)CH(2)O)(6)CH(3) {(EO)(6)} and HS(CH(2))(3)O(CH(2)CH(2)O)(5)CH(3) {C(3)(EO)(5)} - on Au from aqueous solutions. Kinetic data for all compounds follow simple Langmuirian models with the disulfide reaching a self-limiting final state (d=1.2nm) more rapidly than the full coverage final states of the thiol analogs (d=2.0nm). The in-situ ellipsometric thicknesses of all compounds were found to be nearly identical to earlier ex-situ ellipsometric measurements suggesting similar surface coverages and structural models in air and under water. Exposure to bovine serum albumin (BSA) shows the self-limiting (d=1.2nm) [S(EO)(6)](2) SAMs to be the most highly protein resistant surfaces relative to bare Au and completely-formed SAMs of the two analogous thiols and octadecanethiol (ODT). When challenged with up to near physiological levels of BSA (2.5mg/mL), protein adsorption on the final state [S(EO)(6)](2) SAM was only 3% of that which adsorbed to the bare Au and ODT SAMs.     

Packing density of HS(CH2)(n)COOH self-assembled monolayers

Self-assembled monolayers (SAMs) of HS(CH(2))(n)COOH, n = 5, 10, 15 deposited from ethanol solution onto gold are prepared by five approaches, and their packing densities are evaluated by X-ray photoelectron spectroscopy (XPS) measurements. The five approaches are: (1) direct deposition; (2) acetic-acid-assisted deposition; (3) butyl-amine-assisted deposition; (4) displacement of a preformed HS(CH(2))(n)CH(3) (n = 5, 10, 15) SAMs; and (5) co-deposition with HS(CH(2))(n)CH(3) (n = 5, 10, 15). Packing density metrics are calculated from measurements of SAM and substrate photoemission intensities and their attenuations by two methods. In one case the attenuated photoemissions are expressed as a ratio relative to comparable measurements on an experimental HS(CH(2))(n)CH(3) model system. In the other case a new method is introduced where a calculated attenuation based on theoretical random coil and extended chain models is used as the reference to determine a packing density fraction. Packing densities are also correlated with the S2p(Au-bonded):Au4f peak area ratios and with shifts in the C1s binding energies. SAMs prepared by the direct deposition are a partial multilayer where a second molecular layer is physisorbed onto the SAM and not removable by solvent washing. The addition of acetic acid to the deposition solution disrupts dimer associations of HS(CH(2))(n)COOH in solution and at the surface of the monolayer and yields the most ordered monolayer with the highest density of -COOH groups. The addition of butyl amine results in a labile ammonium carbonate ion pair formation but results in a lower packing density in the SAM. The displacement of the preformed HS(CH(2))(n)CH(3) SAM and the co-deposition of HS(CH(2))(n)CH(3) with HS(CH(2))(n)COOH result in SAMs with little incorporation of the -COOH component.     

Modification and stability of aromatic self-assembled monolayers upon irradiation with energetic particles

We have studied ion and electron irradiation of self-assembled monolayers (SAMs) of 2-(4'-methyl-biphenyl-4yl)-ethanethiol (BP2, CH3-C6H4C6H4CH2CH2-SH), phenyl mercaptan (PEM, C6H5CH2CH2-SH), and 4'-methyl-biphenyl-4-thiol (BP0, CH3-C6H4C6H4-SH) deposited on Au(111) substrates. Desorption of neutral particles from PEM/Au and BP2/Au was investigated using laser ionization in combination with mass spectrometry. The ion-induced damage of both BP2 and PEM SAMs is very efficient and interaction with a single ion leads to the modification of tens of molecules. This feature is the result of a desorption process caused by a chemical reaction initiated by an ion impact. Both for ions and electrons, experiments indicate that the possibility for scission of the Au-S bond strongly depends on the chemical nature of the SAM system. We attribute the possible origin of this effect to the orientation of the Au-S-C angle or adsorption sites of molecules. The analysis of electron-irradiated PEM/Au and BP2/Au, using ion-initiated laser probing, enabled measurements of the cross section for the electron-induced damage of the intact molecule or specific fragment. Analysis of electron-irradiated BP0/Au by using time-of-flight secondary ion mass spectrometry (TOF-SIMS) provides direct evidence for the quasi-polymerization process induced by electron irradiation.     

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry of self-assembled monolayers of ruthenium complexes on gold

Self-assembled monolayers (SAMs) of three ruthenium complexes, [Ru(L)(2)](PF(6))(2), [Ru(L)(tpyPO(3))](PF(6))(2), and [Ru(L18)(tpyPO(3))](PF(6))(2), were prepared on evaporated gold films on glass or stainless steel plates; where L = 2, 6-bis(benzimidazoyl)pyridine, tpyPO(3) = 2,6-bis(2,2':6', 2"-terpyridyl)pyridine phosphanate, and L18 = 2, 6-bis(N-octadecylbenzimidazoyl)pyridine. Structures of these SAM complexes were studied by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS). The SAMs were either prepared by direct binding of Ru-complexes to Au films by alkanethiol or by the multilayer method. In the multilayer method 1,4-thiobutylphosphate was used to form a base layer on an Au film, and the base layer was then chemically bridged to the Ru-complexes by zirconium phosphate. MALDI-TOFMS of SAM1, that had been prepared by direct binding of [Ru(L)(2)](PF(6))(2) to the Au film by an octanethiol group, showed cleavage at the S-Au linkages and elimination of the counter anion to yield a molecular ion and its dimeric ion. On the other hand, SAM2 and SAM3, which had been prepared by bridging Ru-complexes [Ru(L)(tpyPO(3))](PF(6))(2) or [Ru(L18)(tpyPO(3))](PF(6))(2) to the base layers with zirconium phosphate, showed dissociation from the base layers and elimination of the counter anion to give ions of the Ru complex molecules and their fragmentation ions. No molecular ion containing the base layer resulting from the S-Au bond cleavage was observed. Copyright 2000 John Wiley & Sons, Ltd.     

Preferential adsorption of amino-terminated silane in a binary mixed self-assembled monolayer

The composition and structure of a binary mixed self-assembled monolayer (SAM) of 3-aminopropyltriethoxysilane (APS, NH(2)(CH(2))(3)Si(OCH(2)CH(3))(3)) and octadecyltrimethoxysilane (ODS, CH(3)(CH(2))(17)Si(OCH(3))(3)) on a silicon oxide surface have been characterized by water contact-angle measurements, X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and sum frequency generation (SFG) vibrational spectroscopy. XPS demonstrated that APS in the mixed SAM is significantly enriched in comparison to that in solution, indicating the preferential adsorption of APS during the SAM formation. AFM observations showed that the mixed SAM becomes rougher. SFG revealed that the coadsorption of APS induced a conformation disordering in the ODS molecules present in the mixed SAM. The surface enrichment of APS has been explained in terms of differences in the surface adsorption rates of the two components as well as in the self-congregation states of APS molecules in the bulk solution. Furthermore, the structure of the water molecules on the mixed SAM surface in contact with the aqueous solutions at different pH's has also been studied. The results indicate that the mixed-SAM modified surface is positively charged at pH < 5 and negatively charged at pH > 7.     

Controlling gold atom penetration through alkanethiolate self-assembled monolayers on Au{111} by adjusting terminal group intermolecular interactions

The penetration behavior of thermally evaporated Au on S(CH(2))(15)CH(3), S(CH(2))(15)CO(2)CH(3), S(CH(2))(15)CO(2)H, K-modified S(CH(2))(15)CO(2)CH(3), and K-modified S(CH(2))(15)CO(2)H self-assembled monolayers (SAM) on Au substrates is investigated. Gold is a particularly interesting metal since vapor-deposited Au atoms are known to pass through alkanethiolate SAMs on Au{111} substrates at room temperature. Here we show that it is possible to control Au penetration by adjusting the interactions between terminal groups. It is found that Au atoms evenly penetrate into the CH(3) and CO(2)CH(3) films, forming smooth buried layers below the organic thin films. For the CO(2)H film, although Au atoms can still penetrate through it, filaments and mushroomlike clusters form due to H-bonding between film molecules. In the case of the K-modified CO(2)CH(3) or CO(2)H films, however, most Au atoms form islands at the vacuum interface. These results suggest that van der Waals forces and H-bonds are not strong enough to block Au from going through but that ionic interactions are able to block Au penetration. The measurements were performed primarily using time-of-flight secondary ion mass spectrometry (ToF-SIMS) and atomic force microscopy (AFM). The combination of these highly complementary probes provides a very useful strategy for the study of metal atom behavior on SAMs.     

Synthesis and structural characterization of an azatitanacyclobutene: the key intermediate in the catalytic anti-Markovnikov addition of primary amines to [small alpha]-alkynes

Reaction of the imidotitanium complexes [Ti(N(t)Bu)(N(2)N(py))(py)](1) and [Ti(N-2,6-C(6)H(3)(i)Pr(2))(N(2)N(py))(py)](2) with phenyl acetylene and tolyl acetylene in toluene gave the corresponding [2+2] cycloaddition products [Ti(N(2)N(py))[kappa(2)-N((t)Bu)CH[double bond]CR]](R = Ph:3, Tol:4) and [Ti(N(2)N(py))[kappa(2)-N(2,6-C(6)H(3)(i)Pr(2))CH[double bond]CR]](R = Ph:5, Tol: 6). Complex 6 is the first example of a key intermediate in the anti-Markovnikov addition of a primary amine to a terminal acetylene which has been structurally characterized by X-ray diffraction.     

Multimetallic complexes of group 10 and 11 metals based on polydentate dithiocarbamate ligands

The ligands KS(2)CN(Bz)CH(2)CH(2)N(Bz)CS(2)K (K(2)L(1)), N(CH(2)CH(2)N(Me)CS(2)Na)(3) (Na(3)L(2)), and the new chelates {(CH(2)CH(2))NCS(2)Na}(3) (Na(3)L(3)) and {CH(2)CH(2)N(CS(2)Na)CH(2)CH(2)CH(2)NCS(2)Na}(2) (Na(4)L(4)), react with the gold(I) complexes [ClAu(PR(3))] (R = Me, Ph, Cy) and [ClAu(IDip)] to yield di-, tri-and tetragold compounds. Larger metal units can also be coordinated by the longer, flexible linker, K(2)L(1). Thus two equivalents of cis-[PtCl(2)(PEt(3))(2)] react with K(2)L(1) in the presence of NH(4)PF(6) to yield the bimetallic complex [L(1){Pt(PEt(3))(2)}(2)](PF(6))(2). The compounds [NiCl(2)(dppp)] and [MCl(2)(dppf)] (M = Ni, Pd, Pt; dppp = 1,3-bis(diphenylphosphino)propane, dppf = 1,1'-bis(diphenylphosphino)ferrocene) also yield the dications, [L(1){Ni(dppp)}(2)](2+) and [L(1){Ni(dppf)}(2)](2+) in an analogous fashion. In the same manner, reaction between [(L'(2))(AuCl)(2)] (L'(2) = dppm, dppf; dppm = bis(diphenylphosphino)methane) and KS(2)CN(Bz)CH(2)CH(2)N(Bz)CS(2)K yield [L(1){Au(2)(L'(2))}(2)]. The molecular structures of [L(1){M(dppf)}(2)](PF(6))(2) (M = Ni, Pd) and [L(1){Au(PR(3))}(2)] (R = Me, Ph) are reported.     

Synthesis and characterisation of new titanium amino-alkoxides: precursors for the formation of TiO2 materials

Reaction of the amino-alkoxides HOCH(CH(2)NMe(2))(2) (Hbdmap) and HOC(CH(2)NMe(2))(3) (Htdmap) with [Ti(OR)(4)] yields a series of heteroleptic titanium alkoxides [Ti(OR)(4-n)(L)(n)] (L = bdmap, tdmap). Substitution of the monodentate alkoxide with the chelating alkoxides becomes progressively more difficult, with homogeneous products being obtained only for n = 1, 2. The structure of [Ti(OEt)(3)(bdmap)](2), a mu-OEt bridged dimer, has been determined. Hydrolysis of [Ti(OR)(2)(L)(2)], by adventitious moisture affords the dimeric oxo-alkoxides [Ti(O)(L)(2)](2), both of which have been characterised crystallographically. These two compounds have also been prepared by reaction of [Ti(NMe(2))(2)(L)(2)] with the hydrated metal salts [Zn(acac)(2).2H(2)O] and [Zn(OAc)(2).2H(2)O] using the intrinsic water molecules in these salts to react with the labile amido groups, though the former also produces Me(Me(2)N)C=C(H)C(O)Me from reaction of liberated HNMe(2) with the coordinated acac ligand, while the latter also affords the ligand exchange product [Zn(OAc)(bdmap)]. In neither case does the free dimethylamino group of [Ti(O)(L)(2)](2) coordinate a second metal. The dimeric structure of [Zn(OAc)(bdmap)](2) has been established, and the structure of the tetrameric oxo-alkoxide [Ti(O)(OPr(i))(OCH(2)CH(2)NMe(2))](4) is reported for comparison with others in this study. [Ti(OEt)(3)(bdmap)](2) has been used as a precursor in AACVD (Aerosol-Assisted Chemical Vapour Deposition) to generate amorphous TiO(2) films on glass at 440 degrees C, and TiO(2)@C nanoparticles of approximate diameter 350 nm with a carbon coating of width ca. 75 nm on heating in a sealed container at 700 degrees C.     

Reactions of acetonitrile coordinated to a nitrosylruthenium complex with H2O or CH(3)OH under mild conditions: structural characterization of imido-type complexes

The reaction of cis-[Ru(NO)(CH(3)CN)(bpy)(2)](3+) (bpy = 2,2'-bipyridine) in H(2)O at room temperature proceeded to afford two new nitrosylruthenium complexes. These complexes have been identified as nitrosylruthenium complexes containing the N-bound methylcarboxyimidato ligand, cis-[Ru(NO)(NH=C(O)CH(3))(bpy)(2)](2+), and methylcarboxyimido acid ligand, cis-[Ru(NO)(NH=C(OH)CH(3))(bpy)(2)](3+), formed by an electrophilic reaction at the nitrile carbon of the acetonitrile coordinated to the ruthenium ion. The X-ray structure analysis on a single crystal obtained from CH(3)CN-H(2)O solution of cis-[Ru(NO)(NH=C(O)CH(3))(bpy)(2)](PF(6))(3) has been performed: C(22)H(20.5)N(6)O(2)P(2.5)F(15)Ru, orthorhombic, Pccn, a = 15.966(1) A, b = 31.839(1) A, c = 11.707(1) A, V = 5950.8(4) A(3), and Z = 8. The structural results revealed that the single crystal consisted of 1:1 mixture of cis-[Ru(NO)(NH=C(O)CH(3))(bpy)(2)](2+) and cis-[Ru(NO)(NH=C(OH)CH(3))(bpy)(2)](3+) and the structural formula of this single crystal was thus [Ru(NO)(NH=C(OH(0.5))CH(3))(bpy)(2)](PF(6))(2.5). The reaction of cis-[Ru(NO)(CH(3)CN)(bpy)(2)](3+) in dry CH(3)OH-CH(3)CN at room temperature afforded a nitrosylruthenium complex containing the methyl methylcarboxyimidate ligand, cis-[Ru(NO)(NH=C(OCH(3))CH(3))(bpy)(2)](3+). The structure has been determined by X-ray structure analysis: C(25)H(29)N(8)O(18)Cl(3)Ru, monoclinic, P2(1)/c, a = 13.129(1) A, b = 17.053(1) A, c = 15.711(1) A, beta = 90.876(5) degrees, V = 3517.3(4) A(3), and Z = 4.     

Fluoride-ion acceptor properties of WSF4: synthesis, characterization, and computational study of the WSF5(-) and W2S2F9(-) anions and 19F NMR spectroscopic characterization of the W2OSF9(-) anion

The new [N(CH(3))(4)][WSF(5)] salt was synthesized by two preparative methods: (a) by reaction of WSF(4) with [N(CH(3))(4)][F] in CH(3)CN and (b) directly from WF(6) using the new sulfide-transfer reagent [N(CH(3))(4)][SSi(CH(3))(3)]. The [N(CH(3))(4)][WSF(5)] salt was characterized by Raman, IR, and (19)F NMR spectroscopy and [N(CH(3))(4)][WSF(5)]·CH(3)CN by X-ray crystallography. The reaction of WSF(4) with half an aliquot of [N(CH(3))(4)][F] yielded [N(CH(3))(4)][W(2)S(2)F(9)], which was characterized by Raman and (19)F NMR spectroscopy and by X-ray crystallography. The WSF(5)(-) and W(2)S(2)F(9)(-) anions were studied by density functional theory calculations. The novel [W(2)OSF(9)](-) anion was observed by (19)F NMR spectroscopy in a CH(3)CN solution of WOF(4) and WSF(5)(-), as well as CH(3)CN solutions of WSF(4) and WOF(5)(-).     

Bond insertion, complexation, and penetration pathways of vapor-deposited aluminum atoms with HO- and CH(3)O-terminated organic monolayers

The interaction of vapor-deposited Al atoms with self-assembled monolayers (SAMs) of HS-(CH(2))(16)-X (X = -OH and -OCH(3)) chemisorbed at polycrystalline Au[111] surfaces was studied using time-of-flight secondary-ion mass spectrometry, X-ray photoelectron spectroscopy, and infrared reflectance spectroscopy. Whereas quantum chemical theory calculations show that Al insertion into the C-C, C-H, C-O, and O-H bonds is favorable energetically, it is observed that deposited Al inserts only with the OH SAM to form an -O-Al-H product. This reaction appears to cease prior to complete -OH consumption, and is followed by formation of a few overlayers of a nonmetallic type of phase and finally deposition of a metallic film. In contrast, for the OCH(3) SAM, the deposited Al atoms partition along two parallel paths: nucleation and growth of an overlayer metal film, and penetration through the OCH(3) SAM to the monolayer/Au interface region. By considering a previous observation that a CH(3) terminal group favors penetration as the dominant initial process, and using theory calculations of Al-molecule interaction energies, we suggest that the competition between the penetration and overlayer film nucleation channels is regulated by small differences in the Al-SAM terminal group interaction energies. These results demonstrate the highly subtle effects of surface structure and composition on the nucleation and growth of metal films on organic surfaces and point to a new perspective on organometallic and metal-solvent interactions.     

Improving the surface biocompatibility with the use of mixed zwitterionic self-assembled monolayers prepared by a proper solvent

In this study, the mixed self-assembled monolayers (SAMs) containing the mixture of long-chain alkanethiol, SH(CH(2))(11)NH(2) and SH(CH(2))(10)SO(3)H, was prepared as a model surface to examine the interaction between the biological environment and artificial surface. The 10% (v/v) NH(4)OH ethanolic solution and DMSO were chosen as the solvents for the preparation of these mixed SAMs and the "solvent effect" was discussed. X-ray photoelectron spectroscopy (XPS) has indicated that -SO(3)H/-NH(2) mixed SAMs formed from 10% (v/v) NH(4)OH ethanolic solution were surface "-SO(3)H poor", while a nearly equivalent amount of surface -SO(3)H functionality was presented on the mixed SAMs formed from DMSO. This has resulted from the different solvation capability between solvent molecules and the alkanethiol. Such solvent effects were also reflected in various surface properties such as surface wettability and surface zeta potential. The mixed SAMs formed from DMSO were more surface hydrophilic and less negatively surface charged than from 10% (v/v) NH(4)OH ethanolic solution. In addition, these mixed SAMs formed from DMSO exhibited the least amount of protein adsorbed as well as a better platelet compatibility than its counterpart from 10% (v/v) NH(4)OH ethanolic solution. These findings indicated that choosing a proper solvent for mixed zwitterionic SAM can greatly affect its surface properties and biocompatibility, such as to form a surface with near neutrality for reducing protein adsorption and subsequent platelet adhesion and activation.     

Ab initio calculations of the reaction mechanisms for metal-nitride deposition from organo-metallic precursors onto functionalized self-assembled monolayers

An atomistic mechanism has been derived for the initial stages of the adsorption reaction for metal-nitride atomic layer deposition (ALD) from alkylamido organometallic precursors of Ti and Zr on alkyltrichorosilane-based self-assembled monolayers (SAMs). The effect of altering the terminal functional group on the SAM (including -OH, -NH2, -SH, and -NH(CH3)) has been investigated using the density functional theory and the MP2 perturbation theory. Reactions on amine-terminated SAMs proceed through the formation of a dative-bond complex with an activation barrier of 16-20 kcal/mol. In contrast, thiol-terminated SAMs form weak hydrogen-bonded intermediates with activation barriers between 7 and 10 kcal/mol. The deposition of Ti organometallic precursors on hydroxyl-terminated SAMs proceeds through the formation of stronger hydrogen-bonded complexes with barriers of 7 kcal/mol. Zr-based precursors form dative-bonded adducts with near barrierless transitions. This variety allows us to select a kinetically favorable substrate for a chosen precursor. The predicted order of reactivity of differently terminated SAMs and the temperature dependence of the initial reaction probability have been confirmed for Ti-based precursors by recent experimental results. We predict that the replacement of methyl groups by trifluoromethyl groups on the SAM backbone decreases the activation barrier for amine-terminated SAMs by 5 kcal/mol. This opens a route to alter the native reactivities of a given SAM termination, in this case making amine termination energetically viable. The surface distribution of SAM molecules has a strong effect on the adsorption kinetics of Ti-based precursors. Unimolecular side decomposition reactions were found to be kinetically competitive with adsorption at 400 K.     

Self-assembled monolayers of semifluorinated alkaneselenolates on noble metal substrates

Self-assembled monolayers (SAMs) formed from semifluorinated dialkyldiselenol (CF(3)(CF(2))(5)(CH(2))(2)Se-)(2) (F6H2SeSeH2F6) on polycrystalline Au(111) and Ag(111) were characterized by high-resolution X-ray photoelectron spectroscopy, infrared reflection absorption spectroscopy, near edge X-ray absorption fine structure spectroscopy, scanning tunneling microscopy, and contact angle measurements. The Se-Se linkage of F6H2SeSeH2F6 was found to be cleaved upon the adsorption, followed by the formation of selenolate-metal bond. The resulting F6H2Se SAMs are well-ordered, densely packed, and contamination-free. The packing density of these films is governed by the bulky fluorocarbon part, which exhibits the expected helical conformation. A noncommensurate hexagonal arrangement of the F6H2Se molecules with an average nearest-neighbor spacing of about 5.8 +/- 0.2 A, close to the van der Waals diameter the fluorocarbon chain, was observed on Au(111). The orientation of the fluorocarbon chains in the F6H2Se SAMs does not depend on the substrate-the average tilt angle of these moieties was estimated to be about 21-22 degrees on both Au and Ag.     

Ferromagnetic interaction in mu1,3-cyanamido-derived copper(II) cryptates

The reaction of dinuclear copper(II) cryptates with calcium cyanamide, CaNCN, and sodium dicyanamide, Na[N(CN)(2)] results in dinuclear compounds of formulae [Cu(2)(HNCN)(R3Bm)](ClO(4))(3) (1), [Cu(2)(dca)(R3Bm)](ClO(4))(3)4H(2)O (2), and [Cu(2)(NCNCONH(2))(R3Bm)](CF(3)SO(3))(3) (3), in which R3Bm=N[(CH(2))(2)NHCH(2)(C(6)H(4)-m)CH(2)NH(CH(2))(2)](3)N and dca=dicyanamido ligand (NCNCN(-)). The X-ray diffraction analysis reveals for both 1 and 3 a dinuclear entity in which the copper atoms are bridged by means of the -NCN- unit. The molar magnetic susceptibility measurements of 1-3 in the 2-300 K range indicate ferromagnetic coupling. The calculated J values, by using theoretical methods based on density functional theory (DFT) are in excellent agreement with the experimental data. Catalytic hydration of a nitrile to an amide functional group is assumed responsible for the formation of 3 from a mu(1,3)-dicyanamido ligand.     

Syntheses, structures and properties of a series of non-heme alkoxide-Fe(III) complexes of a benzimidazolyl-rich ligand as models for lipoxygenase

The treatment of Fe(ClO(4))(2)·6H(2)O or Fe(ClO(4))(3)·9H(2)O with a benzimidazolyl-rich ligand, N,N,N',N'-tetrakis[(1-methyl-2-benzimidazolyl)methyl]-1,2-ethanediamine (medtb) in alcohol/MeCN gives a mononuclear ferrous complex, [Fe(II)(medtb)](ClO(4))(2)·?CH(3)CN·?CH(3)OH (1), and four non-heme alkoxide-iron(III) complexes, [Fe(III)(OMe)(medtb)](ClO(4))(2)·H(2)O (2, alcohol = MeOH), [Fe(III)(OEt)(Hmedtb)](ClO(4))(3)·CH(3)CN (3, alcohol = EtOH), [Fe(III)(O(n)Pr)(Hmedtb)](ClO(4))(3)·(n)PrOH·2CH(3)CN (4, alcohol = n-PrOH), and [Fe(III)(O(n)Bu)(Hmedtb)](ClO(4))(3)·3CH(3)CN·H(2)O (5, alcohol = n-BuOH), respectively. The alkoxide-iron(III) complexes all show 1) a Fe(III)-OR center (R = Me, 2; Et, 3; (n)Pr, 4; (n)Bu, 5) with the Fe-O bond distances in the range of 1.781-1.816 ?, and 2) a yellow color and an intense electronic transition around 370 nm. The alkoxide-iron(III) complexes can be reduced by organic compounds with a cis,cis-1,4-diene moiety via the hydrogen atom abstraction reaction.     

Electrochemical and surface characterization of 4-aminothiophenol adsorption at polycrystalline platinum electrodes

The formation of a self-assembled monolayer (SAM) of 4-aminothiophenol (4-ATP) on polycrystalline platinum electrodes has been characterized by surface analysis and electrochemistry techniques. The 4-ATP monolayer was characterized by cyclic voltammetry (CV), linear sweep voltammetry, Raman spectroscopy, reflection-absorption infrared (RAIR) spectroscopy, and X-ray photoelectron spectroscopy (XPS). CV was used to study the dependence of the adsorption time and 4-ATP solution concentration on the relative degree of coverage of 4-ATP monolayers on polycrystalline Pt electrodes. The adsorption time range probed was 24-72 h. The optimal concentration of 4-ATP needed to obtain the highest surface at the lowest adsorption time was 10 mM. RAIR and Raman spectroscopy for 4-ATP-modified platinum electrodes showed the characteristic adsorption bands for 4-ATP, such as nuNH, nuCH(arom), and nuCS(arom), indicating the adsorption on the platinum surface. The XPS spectra for the modified Pt surface presented the binding energy peaks of sulfur and nitrogen. High energy resolution XPS studies, RAIR, and Raman spectrum for platinum electrodes modified with 4-ATP indicate that the molecules are sulfur-bonded to the platinum surface. The formation of a S-Pt bond suggests that ATP adsorption leads to an amino-terminated electrode surface. The thickness of the monolayer was evaluated via angle-resolved XPS (AR-XPS) analyses, giving a value of 8 A. As evidence of the terminal amino group on the electrode surface, the chemical derivatization of the 4-ATP SAM was done with 16-Br hexadecanoic acid. This surface reaction was followed by RAIR spectroscopy.