Electrochemical Reduction of 4,4′‐(2,2,2‐Trichloroethane‐1,1‐diyl)‐ bis(chlorobenzene) (DDT) and 4,4′‐(2,2‐Dichloroethane‐1,1‐diyl)‐ bis(chlorobenzene) (DDD) at Carbon Cathodes in Dimethylformamide

In dimethylformamide containing tetramethylammonium tetrafluoroborate, cyclic voltammograms for reduction of 4,4′‐(2,2,2‐trichloroethane‐1,1‐diyl)bis(chlorobenzene) (DDT) at a glassy carbon cathode exhibit five waves, whereas three waves are observed for the reduction of 4,4′‐(2,2‐dichloroethane‐1,1‐diyl)bis(chlorobenzene) (DDD). Bulk electrolyses of DDT and DDD afford 4,4′‐(ethene‐1,1‐diyl)bis(chlorobenzene) (DDNU) as principal product (67–94%), together with 4,4′‐(2‐chloroethene‐1,1‐diyl)bis(chlorobenzene) (DDMU), 1‐chloro‐4‐styrylbenzene, and traces of both 1,1‐diphenylethane and 4,4′‐(ethane‐1,1‐diyl)bis(chlorobenzene) (DDO). For electrolyses of DDT and DDD, the coulometric n values are essentially 4 and 2, respectively. When DDT is reduced in the presence of a large excess of D₂O, the resulting DDNU and DDMU are almost fully deuterated, indicating that reductive cleavage of the carbon–chlorine bonds of DDT is a two‐electron process that involves carbanion intermediates. A mechanistic scheme is proposed to account for the formation of the various products.     

From dimerization, to cycloaddition, to atom transfer cyclization: the further chemistry of TMM diradicals

We describe [a] the first examples of intramolecular cycloaddition of a TMM diyl to a remotely tethered aldehyde, [b] the effect of a Lewis acid upon the course of TMM chemistry, [c] examples of exclusive intramolecular cycloaddition, competitive cycloaddition and ATC, and exclusive ATC, and [d] a set of predictive guidelines with which to assess whether cycloaddition or ATC will be the preferred path, and when the two processes will be competitive. Remarkably, a wide variety of structures can be obtained simply by varying the length of the tether within the diazenes investigated. DFT calculations were used to probe the energy surfaces for both atom transfer and cycloaddition. The transition structure for atom transfer involving the captodative system indicates that it occurs earlier along the reaction coordinate than for a system having only one radical stabilizing group. This is consistent with the existence of an exothermic process leading from the initial diyl to the captodatively stabilized distonic diyl. Gratifyingly, theory agrees with observation and provides substantial insight into the chemistry.     

Synthesis and electroluminescent properties of fluorene‐based copolymers containing electron‐withdrawing thiazole derivatives

We synthesized two fluorene‐based copolymers poly[(2,5‐bis(4‐hexylthiophen‐2‐yl)thiazolo[5,4‐day]thiazole‐5,5′‐diyl)‐alt‐(9,9′‐dioctylfluorene‐2,7‐diyl)] ( PF‐TTZT), and poly[(5,5′‐bis(4‐hexylthiophen‐2‐yl)‐2,2′‐bithiazole‐5,5′‐diyl)‐alt‐(9,9′‐dioctylfluorene‐2,7‐diyl)] (PF‐TBTT), which contain the electron‐withdrawing moieties, thiazolothiazole, and bithiazole, respectively. Through electrochemical studies, we found that these two polymers exhibit stable reversible oxidation and reduction behaviors. Moreover, the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels of PF‐TBTT are lower than those of PF‐TTZT, and the bandgap of PF‐TBTT is smaller than that of PF‐TTZT. Thus the bithiazole moiety in PF‐TBTT is more electron‐withdrawing than the thiazolothiazole moiety in PF‐TTZT. Light‐emitting devices with indium tin oxide (ITO)/poly(3,4‐ethylene dioxythiophene):poly(styrenesulfonate)(PEDOT)/polymer/bis(2‐methyl‐8‐quinolinato)‐4‐phenylphenolate aluminum (BAlq)/LiF/Al configurations were fabricated. The performance of the PF‐TBTT device was found to be almost three times better than that of the PF‐TTZT device, which is because electron injection from the cathode to PF‐TBTT is much easier than for PF‐TTZT. We also investigated the planarity and frontier orbitals of the electron donor‐acceptor (D‐A) moieties with computational calculations using ab initio Hartree–Fock with the split‐valence 6‐31G* basis set. These calculations show that TBTT has a more nonplanar structure than TTZT and that the bithiazole moiety is more electron‐withdrawing than thiazolothiazole. These calculations are in good agreement with the experimental results. © Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7148–7161, 2008     

Tandem cycloaddition reactions of allenyl diazo compounds forming triquinanes via trimethylenemethane diyls

A tandem reaction strategy for forming triquinanes from linear allenyl diazo compounds through an intramolecular 1,3-dipolar cycloaddition reaction of an allenyl diazo group that generates a trimethylenemethane (TMM) diyl followed by an intramolecular [2 + 3] TMM diyl cycloaddition reaction has been developed. The new tandem cycloaddition reaction is readily applicable to the synthesis of complex molecules with high versatility and efficiency.     

Total Synthesis of Ceratopicanol through Tandem Cycloaddition Reaction of a Linear Substrate

Total synthesis of ceratopicanol ( 1 ) was achieved with a tandem cycloaddition reaction of allenyl diazo compound 6 via a trimethylenemethane (TMM) diyl intermediate. The TMM diyl mediated [2+3] cycloaddition reaction furnished the consecutive quaternary carbon centers and showed an unusual diastereoselectivity.     

Potential/current characteristics of the ferrous—thionine photogalvanic cell

Experimental potential/current results for a ferrous—thionine photogalvanic cell are compared with calculations based on an earlier proposed mechanistic scheme. There is good agreement. A brief discussion is given of factors influencing the performance of this type of photogalvanic system.     

Deciphering the mechanistic dichotomy in the cyclization of 1-(2-ethynylphenyl)-3,3-dialkyltriazenes: competition between pericyclic and pseudocoarctate pathways

The mechanistic aspects of the cyclization of (2-ethynylphenyl)triazenes under both thermal and copper-mediated conditions are reported. For cyclization to an isoindazole, a carbene mechanistic pathway is proposed. The carbene intermediate can react with oxygen, dimerize to give an alkene, or be trapped either intermolecularly (using 2,3-dimethyl-2-butene to generate a cyclopropane) or intramolecularly (using a biphenyl moiety at the terminus of the acetylene to form a fluorene). Density-functional theory (DFT) calculations support a pseudocoarctate pathway for this type of cyclization. Thermal cyclization to give a cinnoline from (2-ethynylphenyl)triazenes is proposed to occur through a pericyclic pathway. DFT calculations predict a zwitterionic dehydrocinnolinium intermediate that is supported by deuterium trapping studies as well as cyclizations performed using a 2,2,6,6-tetramethylpiperidine moiety at the 3-position of the triazene.     

Conformational Dependence of Through‐Space Tellurium–Tellurium Spin–Spin Coupling in Peri‐Substituted Bis(Tellurides)

Three related series of peri‐substituted bis(tellurides) bearing naphthalene, acenaphthene and acenaphthylene backbones (Nap/Acenap/Aceyl(TeY)₂ (Nap=naphthalene‐1,8‐diyl N ; Acenap=acenaphthene‐5,6‐diyl A ; Aceyl=acenaphthylene‐5,6‐diyl Ay ; Y=Ph 1 ; Fp 2 ; Tol 3 ; An‐p­ 4 ; An‐o­ 5 ; Tp 6 ; Mes 7 ; Tip 8 ) have been synthesised and their solid‐state structures determined by X‐ray crystallography. Molecular conformations were classified as a function of the two C9‐C‐Te‐C(Y) dihedral angles (θ); in the solid all members adopt AB or CCt configurations, with larger Te(aryl) moieties exclusively imposing the CCt variant. Exceptionally large J(¹²⁵Te,¹²⁵Te) spin–spin coupling constants between 3289–3848 Hz were obtained for compounds substituted by bulky Te(aryl) groups, implying these species are locked in a CCt‐type conformation. In contrast, compounds incorporating smaller Te(aryl) moieties are predicted to be rather dynamic in solution and afford much smaller J values (2050–2676 Hz), characteristic of greater populations of AB conformers with lower couplings. This conformational dependence of through‐space coupling is supported by DFT calculations.     

Semiempirical MO methods: the middle ground in molecular modeling

Semiempirical methods occupy an important middle ground between molecular mechanics and ab initio MO calculations in the repertoire of methods available for studying the structures, properties and reactions of molecules. They have a unique combination of speed and generality which makes it possible to study many chemical systems which are beyond the reach of classical force fields and too large for ab initio MO methods. Indeed, semiempirical calculations are often the first computational technique to be applied to a chemical problem. Three examples where semiempirical MO calculations have provided significant mechanistic insight are the cylcopropylcarbinyl cation, porphyrin structure and dynamics, and the role of C---H hydrogen bonds in polymer miscibility. In each case Semiempirical calculations have been at the fore, and their results have been generally confirmed by subsequent ab initio calculations and experiment.     

New Aspects of 1,3‐Diphosphacyclobutane‐2,4‐diyls

1,3‐Di(tert‐butyl)‐2,4‐bis[2,4,6‐tri(tert‐butyl)phenyl]‐1,3‐diphosphacyclobutane‐2,4‐diyl was formed from [2,4,6‐tri(tert‐butyl)phenyl]phosphaacetylene and t‐BuLi. In addition, the X‐ray diffraction analysis was carried out, together with theoretical calculations of the structure and NMR data.     

Theoretical investigations on the mechanism of chalcogens exchange reaction between P(V) and P(III) compounds

Two mechanistic pathways for chalcogens transfer from P(V) to P(III) compounds were explored using density functional theory calculations and for both of them the corresponding transition states were identified. The calculations showed that transfer of sulfur and selenium proceeds most likely via an X-philic attack of the phosphorus nucleophile on the chalcogen, while for the oxygen transfer reaction, a mechanism involving a three-membered cyclic transition state is equally likely.     

Theoretical studies on the inactivation mechanism of γ-aminobutyric acid aminotransferase

The inactivation mechanism of γ-aminobutyric acid aminotransferase (GABA-AT) in the presence of γ-vinyl-aminobutyric acid, an anti-epilepsy drug, has been studied by means of theoretical calculations. Density functional theory methods have been applied to compare the three experimentally proposed inactivation mechanisms (Silverman et al., J. Biol. Chem., 2004, 279, 363). All the calculations were performed at the B3LYP/6-31+G(d,p) level of theory. Single point solvent calculations were carried out in water, by means of an integral equation formalism-polarizable continuum model (IEFPCM) at the B3LYP/6-31+G(d,p) level of theory. The present calculations provide an insight into the mechanistic preferences of the inactivation reaction of GABA-AT. The results also allow us to elucidate the key factors behind the mechanistic preferences. The computations also confirm the importance of explicit water molecules around the reacting center in the proton transfer steps.     

Detailed Optimization of Polycondensation Reaction via Direct C–H Arylation of Ethylenedioxythiophene

The polycondensation reaction of 3,4‐ethylenedioxythiophene with 2,7‐dibromo‐9,9‐dioctylfluorene via Pd‐catalyzed direct arylation gives poly[(3,4‐ethylenedioxythiophene‐2,5‐diyl)‐(9,9‐dioctylfluorene‐2,7‐diyl)]. The reaction conditions are optimized in terms of the Pd precatalysts, reaction time, and carboxylic acid additives. The combination of 1 mol% Pd(OAc)₂ and 1‐adamantanecarboxylic acid as an additive is the optimized catalytic system, and it yields the corresponding polymer with a molecular weight of 39 400 in 89% yield. The polycondensation reaction, followed by an end‐capping reaction, effectively provides a linear polymer without Br terminals.     

Control of helical chirality of poly(quinoxaline‐2,3‐diyl)s based on postpolymerization modification of the terminal group by small chiral molecules

Poly(quinoxaline‐2,3‐diyl)s having a terminal formyl or boronyl group were prepared by living polymerization of 1,2‐diisocyanobenzenes using organopalladium initiators bearing a protected formyl or boronyl group. Poly(quinoxaline‐2,3‐diyl)s were successfully deracemized by reacting them with small optically active molecules at their terminal formyl or boronyl group, leading to the induction of optically active helical structures. Poly(quinoxaline‐2,3‐diyl) having terminal formyl groups was converted to one‐handed helical polymer, in which the screw‐sense excess was 68% (84:16). The helix sense of the boronyl‐terminated poly(quinoxaline‐2,3‐diyl) was reversibly controlled by attaching and removing the chiral group. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Mechanistic aspects of the metal catalyzed alternating copolymerization of epoxides and carbon monoxide

The cobalt-catalyzed alternating copolymerization of epoxides and CO is a novel, direct approach to aliphatic polyesters, such as poly(hydroxybutyrate) (PHB). This reaction was found to be catalyzed by Ph3Si[Co(CO)4] (4) and pyridine affording in a first step the stable mono-insertion product Ph3Si-O-CH(CH3)-CH2-CO-Co(CO)4 (5). However, a profound mechanistic understanding, especially of the role of pyridine as the key component for the polymerization reaction was missing. ATR-IR online monitoring under catalytic conditions and DFT calculations were used to show that an acylpyridinium cation is formed by cleavage of the cobalt-acyl bond of 5 in the presence of pyridine. The Lewis acid thus generated activates the next incoming epoxide monomer for ring opening through [Co(CO)4]-. The catalytic cycle is completed by a subsequent CO insertion in the new cobalt-alkyl bond. The calculations are used to explore the energetic hypersurface of the polymerization reaction and are complemented by extended experimental investigations that also support the mechanistic hypotheses.     

Formal intramolecular (4 + 1)-cycloaddition of dialkoxycarbenes: control of the stereoselectivity and a mechanistic portrait

The stereoselective synthesis of 5-5, 6-5, and 7-5 fused O-heterocyclic compounds is reported. The key reaction is a formal intramolecular (4 + 1)-cycloaddition involving a dialkoxycarbene and an electron-deficient diene where the stereoselectivity is dependent on the length of the tether. An analysis of the stereochemical outcome of this reaction sheds light on its complex mechanistic picture. High-level calculations were used to support the proposed mechanistic portrait.     

Probing the Mechanism of Allylic Substitution of Morita–Baylis–Hillman Acetates (MBHAs) by using the Silyl Phosphonite Paradigm: Scope and Applications of a Versatile Transformation

A P?C bond‐forming reaction between silyl phosphonites and Morita–Baylis–Hillman acetates (MBHAs) is explored as a general alternative towards medicinally relevant β‐carboxyphosphinic structural motifs. Conversion rates of diversely substituted MBHAs to phosphinic acids 9 or 14 that were recorded by using ³¹P NMR spectroscopy revealed unexpected reactivity differences between ester and nitrile derivatives. These kinetic profiles and DFT calculations support a mechanistic scenario in which observed differences can be explained from the “lateness” of transition states. In addition, we provide experimental evidence suggesting that enolates due to initial P‐Michael addition are not formed. Based on the proposed mechanistic scenario in conjunction with DFT calculations, an interpretation of the E/Z stereoselectivity differences between ester and nitriles is proposed. Synthetic opportunities stemming from this transformation are presented, which deal with the preparation of several synthetically capricious phosphinic building blocks, whose access through the classical P‐Michael synthetic route is not straightforward.     

Synthesis and characterization of cyclopentadithiophene‐based low bandgap copolymers containing electron‐deficient benzoselenadiazole derivatives for photovoltaic devices

We have synthesized two cyclopentadithiophene (CDT)‐based low bandgap copolymers, poly[(4,4‐bis(2‐ethyl‐hexyl)‐4H‐cyclopenta[2,1‐b:3,4‐b′]dithiophene‐2,6‐diyl)‐alt‐(benzo[c][1,2,5]selenadiazole‐4,7‐diyl)] (PCBSe) and poly[(4,4‐bis(2‐ethyl‐hexyl)‐4H‐cyclopenta[2,1‐b:3,4‐b′]dithiophene‐2,6‐diyl)‐alt‐(4,7‐dithiophen‐2‐yl‐benzo[c][1,2,5]selenadiazole‐5,5′‐diyl)] (PCT2BSe), for use in photovoltaic applications. Through the internal charge transfer interaction between the electron‐donating CDT unit and the electron‐accepting benzoselenadiazole, we realized exceedingly low bandgap polymers with bandgaps of 1.37–1.46 eV. The UV–vis absorption maxima of PCT2BSe were subjected to larger hypsochromic shifts than those of PCBSe, because of the distorted electron donor–acceptor (D–A) structures of the PCT2BSe backbone. These results were supported by the calculations of the D–A complex using the ab initio Hartree‐Fock method with a split‐valence 6‐31G* basis set. However, PCT2BSe exhibited a better molar absorption coefficient in the visible region, which can lead to more efficient absorption of sunlight. As a result, PCT2BSe blended with [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PC₆₁BM) exhibited a better photovoltaic performance than PCBSe because of the larger spectral overlap integral with respect to the solar spectrum. Furthermore, when the polymers were blended with PC₇₁BM, PCT2BSe showed the best performance, with an open circuit voltage of 0.55 V, a short‐circuit current of 6.63 mA/cm², and a power conversion efficiency of 1.34% under air mass 1.5 global illumination conditions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1423–1432, 2010     

A theoretical investigation on the mechanism of the PtCl2-mediated cycloisomerization of heteroatom-tethered 1,6-enynes

A mechanistic study based on DFT theoretical calculations for the PtCl(2)-catalyzed formation of bicyclic adducts from heteroatom tethered 1,6-enynes is reported. Different reaction pathways have been taken into account and the results are discussed. This analysis clearly reveals that the kinetically preferred pathway involves an initial 6-endo-cyclization from a triggered reactant complex by pi-complexation of Pt(II) onto the alkyne to form a cyclopropyl platina-carbene intermediate, followed by a [1,2]-hydrogen shift.     

1,3-Diyl trapping reactions. Fundamental investigations with application to the synthesis of linearly fused tricyclopentanoids

A comparison of the inter- and intramolecular diyl trapping routes to linearly fused tricyclopentanoids is presented. In addition, several of the factors which are responsible for the stereoselectivity which is associated with the intramolecular process are examined and it is concluded that conformational rather than electronic (secondary orbital) factors play the dominant role. It is shown that gem methyl groups located on the acyclic chain which joins the diyl and diylophile (in reference to 32 and 35, but not to 47) have no practical effect upon the outcome of the trapping reaction. The intramolecular process is stereospecific with respect to diylophile geometry, and highly stereoselective with respect to the ring junction stereochemistry. Finally, an abortive attempt to synthesize the marine natural product Δ⁹⁽¹²)-capnellene (19) as well as a successful synthesis of the mold metabolite d,l- hirsutene (18) is presented.