Interaction of a poly(acrylic acid) oligomer with dimyristoylphosphatidylcholine bilayers

We studied the influence of 5 kDa poly(acrylic acid) (PAA) on the phase state, thermal properties, and lateral diffusion in bilayered systems of dimyristoylphosphatidylcholine (DMPC) using (31)P NMR spectroscopy, differential scanning calorimetry (DSC), (1)H NMR with a pulsed field gradient, and (1)H nuclear Overhauser enhancement spectroscopy (NOESY). The presence of PAA does not change the lamellar structure of the system. (1)H MAS NOESY cross-peaks observed for the interaction between lipid headgroups and polyion protons demonstrated only surface PAA-biomembrane interaction. Small concentrations of PAA (up to ～4 mol %) lead to the appearance of a new lateral phase with a higher main transition temperature, a lower cooperativity, and a lower enthalpy of transition. Higher concentrations lead to the disappearance of measurable thermal effects. The lateral diffusion coefficient of DMPC and the apparent activation energy of diffusion gradually decreased at PAA concentrations up to around 4 mol %. The observed effects were explained by the formation of at least two types of PAA-DMPC lateral complexes as has been described earlier (Fujiwara, M.; Grubbs, R. H.; Baldeschwieler, J. D. J. Colloid Interface Sci., 1997, 185, 210). The first one is characterized by a stoichiometry of around 28 lipids per polymer, which corresponds to the adsorption of the entire PAA molecule onto the membrane. Lipid molecules of the complex are exchanged with the "pure" lipid bilayer, with the lifetime of the complex being less than 0.1 s. The second type of DMPC-PAA complex is characterized by a stoichiometry of 6 to 7 lipids per polymer and contains PAA molecules that are only partially adsorbed onto the membrane. A decrease in the DMPC diffusion coefficient and activation energy for diffusion in the presence of PAA was explained by the formation of a new cooperative unit for diffusion, which contains the PAA molecule and several molecules of lipids.     

Disordering of phospholipid headgroups induced by a small amount of polyethylene oxide

We present a ³¹P NMR spectroscopy study of planar glass‐plate‐oriented multi‐bilayers of dimyristoylphosphatidylcholine (DMPC) with addition of polyethylene oxide (PEO). This work revealed the presence of a new component in the spectra that appeared only with addition of a small fraction of PEO (up to one PEO segment per dimyristoylphosphatidylcholine molecule) and disappeared when larger amounts of PEO were added. We explained this phenomenon as an effect of an inhomogeneous force field induced by the PEO molecules located at a certain depth in the lipid membrane interface region. Copyright © 2012 John Wiley & Sons, Ltd.     

水-油界面上聚合物单链的动态性质及疏水相互作用

通过荧光关联光谱研究了不相容的水-油界面上聚乙二醇单链的横向扩散运动,系统地研究了PEO单链的扩散运动速率随着水溶液中电解质NaCl浓度的升高的变化规律,发现随着盐浓度的升高,扩散系数的变化主要取决于油相的黏度,说明NaCl浓度的升高增强了聚合物链与烷烃油相的疏水相互作用.     

Molecular dynamics simulation of nonsteroidal antiinflammatory drugs,naproxen and relafen,in a lipid bilayer membrane

Naproxen and relafen, as nonsteroidal antiinflammatory drugs, were simulated in neutral and charged forms and their effects on a lipid bilayer membrane were investigated by molecular dynamics simulation using Groningen machine for chemical simulations software (GROMACS). Simulation of 10 systems was performed, which included different dosages of the drug molecules, naproxen and Relafen, in charged and neutral forms, and a mixture of naproxen and Relafen in neutral forms. The effects of the mixture and the individual drugs' dosages on membrane properties, such as electrostatic potential, order parameter, diffusion coefficients, and hydrogen bond formation, were analyzed. Hydration of the drugs in the membrane system was investigated using radial distribution function analysis. Using fully hydrated dimyristoylphosphatidylcholine (DMPC) as a reference system, 128 lipid molecules and water molecules were simulated exclusively, and the same simulation technique was performed on 10 other systems, including drug mixtures and a DMPC membrane. Angular distributions of lipid chains of the membrane were calculated, and the effects of the drug insertion and chain orientation in the membrane were evaluated. © 2013 Wiley Periodicals, Inc.     

Lateral Diffusion of Lipids and Diffusion of Water through Lipid Bilayers in the Presence of (1,1-Dimethyl-3-Oxobutyl)Phosphonates

The influence of some amphiphilic (diethyl, dipropyl, and dibutyl) esters of (1,1-dimethyl-3-oxobutyl)phosphonic acid with the regularly changing number of CH₂ groups in the hydrocarbon (hydrophobic) moiety on the lateral diffusion of dioleoyl phosphatidylcholine lipid and transmembrane diffusion of water in the oriented multibilayer system was studied by ¹H pulsed field gradient NMR at phosphonate concentrations up to 30 mol %. The shape of the ³¹P NMR spectra and the dependence of the shape of the ¹H NMR spectra on the bilayer orientation suggest that the presence of phosphonates does not affect the phase state of the system. The lamellar liquid crystalline phase remains unchanged, and phosphonate molecules become incorporated into the bilayer and have the same orientation as phospholipid molecules. The presence of phosphonates in the lipid bilayer increases the coefficients of lipid lateral diffusion and water diffusion through bilayers. This effect depends monotonically on the number of CH₂ groups in the phosphonate molecule. The most probable place for the incorporation of amphiphilic phosphonate molecules is the hydrophilic/hydrophobic interphase region of the bilayer. The molecules incorporated into the interphase disorder the bilayer and increase lateral diffusion of lipids and bilayer permeability compared with the ester-free bilayer. When the number of CH₂ groups in the ester molecule increases from diethyl to dibutyl phosphonate, the arrangement of lipid hydrocarbon tails becomes more ordered. This decreases the lipid lateral diffusion coefficient and bilayer permeability to water molecules.     

Ordered nanostructures from self‐assembly of H‐shaped coil–rod–coil molecules

A new class of π‐conjugated, skewed H‐shaped oligomers, consisting of biphenyl, phenylene vinylene, and phenylene ethynylene units as the rigid segment, were synthesized via Sonogashira coupling and Wittig reactions. The coil segments of these molecules were composed of poly(ethylene oxide) (PEO) or PEO with lateral methyl groups between the rod and coil segment, respectively. The experimental results revealed that the lateral methyl groups attached to the surface of the rod and coil segments dramatically influenced the self‐assembling behavior of the molecules in the crystalline phase. H‐shaped rod–coil molecules containing a lateral methyl group at the surface of the rod and PEO coil segments self‐assemble into a two‐dimensional columnar or a three‐dimensional body‐centered tetragonal nanostructures in the crystalline phase, whereas molecules lacking a lateral methyl group based on the PEO coil chain self‐organize into lamellar or hexagonal perforated lamellar nanostructures. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 85–92     

Synthetic polymers and biomembranes. How do they interact? Atomistic molecular dynamics simulation study of PEO in contact with a DMPC lipid bilayer

The understanding of interactions of poly(ethylene glycol) (PEG) or poly(ethylene oxide) (PEO) with biological interfaces has important technological application in industry and in medicine. In this paper, structural and dynamical properties of PEO at the dimyristoylphospatidylcholine (DMPC) bilayer/water interface have been investigated by molecular dynamics (MD) and steered molecular dynamics (SMD) simulations. The structural properties of a PEO chain in bulk water, at the water/vacuum interface, and in the presence of the membrane were compared with available experimental data. The presence of a barrier for the PEO penetration into the DMPC bilayer has been found. A qualitative estimation of the barrier provided a value equal to approximately 19 kJ/mol, that is, 7 times the value of kT at 310 K.     

Spectral diffusion at the water/lipid interface revealed by two-dimensional fourth-order optical spectroscopy: a classical simulation study

Using a classical simulation protocol for nonlinear optical signals, we predict the two-dimensional (2D) spectra of water near a monolayer of [1,2-dimytristoyl-sn-glycero-3-phosphatidylcholine] (DMPC) generated by three IR probe pulses followed by one visible probe pulse. Sum-frequency-generation 1D spectra show two peaks of the OH stretch representing two environments: near-bulk water nonadjacent to DMPC and top-layer water adjacent to DMPC. These peaks create a 2D pattern in the fourth-order signal. The asymmetric cross-peak pattern with respect to the diagonal line is a signature of coherence transfer from the higher- to the lower-frequency modes. The nodal lines in the imaginary part of the 2D spectrum show that the near-bulk water has fast spectral diffusion resembling that of bulk water despite the orientation by the strong electrostatic field of DMPC. The top-layer water has slower spectral diffusion.     

Lateral diffusion of molecules in two-component lipid bilayer: a Monte Carlo simulation study

Lateral diffusion of membrane components makes possible any in-plane membrane reaction and has a key role in signaling in cell membranes. In this report the equilibrium lateral diffusion of intrinsic molecules in an equimolar DMPC/DSPC mixture is simulated using a thoroughly tested two-state model of two-component phospholipid bilayers. The model has been successful in calculating the excess heat capacity function, the most frequent center-to-center distances between DSPC clusters, and the fractal dimensions of gel clusters (Sugar, I. P., Thompson, T. E., Biltonen, R. L. Biophys. J. 1999, 76, 2099-2110). In the gel/fluid mixed phase region, a diffusing intrinsic molecule may change its state from fluid to gel (or from gel to fluid) at any time. A common characterization of the diffusion of intrinsic molecules is given by the simulated average first-passage time curves. We find that these curves can be described as power functions containing two parameters, alpha and beta, except near the percolation threshold of gel/fluid or compositional clusters. We find also that the intrinsic molecules are involved in approximately normal diffusion, i.e., beta approximately 2 in the extreme gel and fluid phase regions, while in the gel/fluid and gel/gel mixed phase regions the diffusion is anomalous, i.e., beta not equal 2. In the mixed phase regions, when the initial local state of the diffusing molecule is not specified, each component is involved in sub-diffusion (beta > 2). In the gel/fluid mixed phase region molecules situated initially inside a fluid cluster are involved in sub-diffusion, but DMPC molecules situated initially inside a gel cluster are involved in super-diffusion (beta < 2). The possibility of anomalous diffusion in membranes apparently arises because the diffusing molecule visits a variety of different environments characterized by its relative proximity to various membrane components. The diffusion is actually anomalous when the components of the bilayer are nonrandomly distributed. The deviation from random distribution is strongly correlated with beta. Similar to the results of the NMR experiments, the calculated relative diffusion coefficient continuously decreases in the gel/fluid mixed phase region with decreasing temperature. In apparent contradiction, diffusion measured by fluorescence recovery after photobleaching (FRAP) demonstrates the existence of a threshold temperature, below which long-range diffusion of FRAP probe molecules is essentially blocked. This threshold temperature is highly correlated with the percolation temperature of gel clusters.     

Layer-by-layer PMIRRAS characterization of DMPC bilayers deposited on a Au111 electrode surface

A combination of Langmuir-Blodgett and Langmuir-Schaefer techniques was employed to deposit 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) bilayers at a gold electrode surface. One leaflet consisted of hydrogen-substituted acyl chains, and the second leaflet was composed of molecules with deuterium-substituted acyl chains. This architecture allowed for layer-by-layer analysis of the structure of the bilayer. Photon polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) was used to determine the conformation and orientation of the acyl chains of DMPC molecules in the individual leaflets as a function of the potential applied to the gold electrode. The bilayer is adsorbed onto the metal surface when the field applied to the membrane does not exceed approximately 108 V/m. When adsorbed, the bottom leaflet is in contact with a hydrophobic metal surface, and the top leaflet is interacting with the aqueous solution. The asymmetry of the environment has an effect on the orientation of the DMPC molecules in each leaflet. The tilt angle of the acyl chains of the DMPC molecules in the bottom leaflet that is in contact with the gold is approximately 10 degrees smaller than that observed for the top leaflet that is exposed to the solution. These studies provide direct evidence that the structure of a phospholipid bilayer deposited at an electrode surface is affected by interaction with the metal.     

Electric field driven changes of a gramicidin containing lipid bilayer supported on a Au(111) surface

Langmuir-Blodgett and Langmuir-Schaeffer methods were employed to deposit a mixed bilayer consisting of 90% of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and 10% of gramicidin (GD), a short 15 residue ion channel forming peptide, onto a Au(111) electrode surface. This architecture allowed us to investigate the effect of the electrostatic potential applied to the electrode on the orientation and conformation of DMPC molecules in the bilayer containing the ion channel. The charge density data were determined from chronocoulometry experiments. The electric field and the potential across the membrane were determined through the use of charge density curves. The magnitudes of potentials across the gold-supported biomimetic membrane were comparable to the transmembrane potential acting on a natural membrane. The information regarding the orientation and conformation of DMPC and GD molecules in the bilayer was obtained from photon polarization modulation infrared reflection absorption spectroscopy (PMIRRAS) measurements. The results show that the bilayer is adsorbed, in direct contact with the metal surface, when the potential across the interface is more positive than -0.4 V and is lifted from the gold surface when the potential across the interface is more negative than -0.4 V. This change in the state of the bilayer has a significant impact on the orientation and conformation of the phospholipid and gramicidin molecules. The potential induced changes in the membrane containing peptide were compared to the changes in the structure of the pure DMPC bilayer determined in earlier studies.     

Solubility, diffusion coefficient and ionic conductivity of alkyl viologens in poly(ethylene oxide) and its derivatives

A series of alkyl viologens RV (R denotes ethyl, butyl, hexyl, heptyl, and dodecyl) was dissolved in poly(ethylene oxide) (PEO) oligomers (average molar masses of 200, 300, 400, 600 and 1000 g mol⁻¹). The solubility of RV in PEO oligomers decreased with increasing alkyl chain length of RV and the molar mass of PEO. Cyclic voltammograms of RV in PEO containing 0.50 M LiClO₄ clearly show two redox waves. The ionic conductivity of PEO oligomers containing RV decreased with increasing alkyl chain length, suggesting the migration of RV itself in the PEO oligomers. Potential step chronoamperometry was used to obtain the apparent diffusion coefficient of RV in the PEO oligomers. The ionic conductivity has a linear relationship with the apparent diffusion coefficient regardless of the RV species, the PEO molar mass and the temperature. RV was shown to act as a redox mediator in PEO oligomers as long as the ionic conductivity of the PEO was high. Poly(oligo(oxyethylene) methacrylate) (PMEO) was used as a solid solvent for a series of alkyl viologens. Since PMEO is an excellent ion-conducting polymer, RV was confirmed to be an effective redox mediator in this PMEO. It was concluded in this study that ionic conductivity in the polymer matrix could be used as an effective parameter for prediction of the diffusion coefficient of charged organic molecules.     

Study of frictional properties of a phospholipid bilayer in a liquid environment with lateral force microscopy as a function of NaCl concentration

Friction properties of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC)-supported planar bilayers deposited on mica were tested in a liquid environment by lateral force microscopy. The presence of these bilayers was detected by imaging and force measurements with atomic force microscopy. To test how the presence of NaCl affects the frictional properties of the phospholipid bilayers, four DMPC bilayers were prepared on mica in saline media ranging from 0 to 0.1 M NaCl. Changes in the lateral vs vertical force curves were recorded as a function of NaCl concentration and related to structural changes induced in the DMPC bilayer by electrolyte ions. Three friction regimes were observed as the vertical force exerted by the tip on the bilayer increased. To relate the friction response to the structure of the DMPC bilayer, topographic images were recorded at the same time as friction data. Ions in solution screened charges present in DMPC polar heads, leading to more compact bilayers. As a consequence, the vertical force at which the bilayer broke during friction experiments increased with NaCl concentration. In addition, the topographic images showed that low-NaCl-concentration bilayers recover more easily due to the low cohesion between phospholipid molecules.     

Supramolecular nanostructures from self‐assembly of T‐shaped rod building block oligomers

T‐shaped coil–rod–coil oligomers, consisting of a dibenzo[a,c]phenazine unit and phenyl groups linked together with acetylenyl bonds at the 2,7‐position of dibenzo[a,c]phenazine as a rigid segment have been synthesized. The coil segments of these new molecules composed of poly(ethylene oxide) (PEO)–poly(propylene oxide) (PPO) incorporating lateral methyl groups between the rod and coil segment and two flexible alkyl groups connecting with the rigid segment at the 4,6‐position of dibenzo[a,c]phenazine, respectively. The experimental results reveal that the length of the flexible PEO coil chain influence construction of various supra‐nanostructures from lamellar structure to rectangular columnar structure. It is also shown that introduction of different length of alkyl side chain groups in the backbone of the T‐shaped molecules affect the self‐organization behavior to form hexagonal perforate layer or oblique columnar structures. In addition, lateral methyl groups attached to the surface of rod and coil segments, dramatically influence the self‐assembling behavior in the crystalline phase. T‐shaped molecules containing a lateral methyl group at the surface of rod and PEO coil segments, self‐assemble into 3D body‐centered tetragonal structures in the crystalline phase, while molecules without a lateral methyl group based on PEO coil chain self‐organize into 2D oblique columnar crystalline structures. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5021–5028     

Highly ordered nanoporous thin films by blending of PSt‐b‐PMMA block copolymers and PEO additives as structure directing agents

Herein, we present a simple method for producing nanoporous templates with a high degree of lateral ordering by self‐assembly of block copolymers. A key feature of this approach is control of the orientation of polymeric microdomains through the use of hydrophilic additives as structure directing agents. Incorporation of hydrophilic poly(ethylene oxide) (PEO) moieties into poly(styrene‐b‐methyl methacrylate) (PSt‐b‐PMMA) diblock copolymers gives vertical alignment of PMMA cylinders on the substrate after solvent annealing. Because of the miscibility between PEO and PMMA, PEO additives were selectively positioned within PMMA microdomains and by controlling the processing conditions, it was found that ordering of PSt‐b‐PMMA diblock copolymers could be achieved. The perpendicular orientation of PMMA cylinders was achieved by increasing the molecular size of the PEO additives leading to an increased hydrophilicity of the PMMA domains and consequently to control the orientation of microdomains in PSt‐b‐PMMA block copolymer thin films. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 8041–8048, 2008     

Characterization of the stable and metastable poly(ethylene oxide)–urea complexes in electrospun fibers

Solution electrospinning was used for the first time to prepare nanofibers of the stable (α) and metastable (β) complexes between poly(ethylene oxide) (PEO) and urea. Both types of fibers were highly crystalline and presented a large level of molecular orientation. Detailed characterization of the ill‐studied β complex was performed using wide angle X‐ray diffraction (WAXD), infrared spectroscopy, and differential scanning calorimetry (DSC). Results reveal that it possesses a 3:2 PEO:urea stoichiometry and suggest that it belongs to the orthorhombic system with a = 1.907 nm, b = 0.862 nm, and c = 0.773 nm. The PEO chains are oriented along the fiber axis and present a conformation significantly affected by strong hydrogen bonding with urea when compared with the pure polymer and the stable complex. A layered structure model is suggested for the metastable complex, in which the urea molecules would be arranged into a ribbon‐like structure intercalated between two PEO layers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1903–1913, 2008     

Homogeneity, electrical resistivity and lateral diffusion of lipid bilayers coupled to polyelectrolyte multilayers

The electrostatic coupling of charged phospholipid bilayers with polyelectrolyte multilayers is studied varying the lipid charge density, multilayer composition and preparation conditions. It is shown that in all cases the bilayer is insufficiently insulating for meaningful electrochemical studies. Homogeneity on a light microscopical length scale was obtained by two methods: vesicle fusion into bilayers and deposition from monolayers by the Langmuir–Schäfer (LB/LS) technique. Largest progress was achieved aiming for lateral diffusion comparable to an uncoupled bilayer. For this mixtures with 10% charged (DOPA) and 90% uncharged (DMPC) lipid were prepared that exhibited sufficient anchoring density and at the same time a fluid DMPC phase on going above the main phase transition at 24°C. This yielded diffusion coefficients in aqueous environment above 1 μm² s⁻¹ with almost no immobile fractions.     

Electrochemical and PM-IRRAS studies of the effect of cholesterol on the properties of the headgroup region of a DMPC bilayer supported at a Au(111) electrode

Polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) was employed to investigate the interaction of cholesterol with the headgroups of dimyristoylphosphatidycholine (DMPC) molecules under a static electric field. DMPC/cholesterol (7:3 molar ratio) mixtures form a bilayer on a Au(111) electrode surface by fusion and spreading of small unilamellar vesicles. PM-IRRAS experiments provided detailed information concerning the conformation and hydration of headgroups of DMPC bilayers in the presence and absence of 30% cholesterol. The presence of 30% cholesterol increases the space between the headgroups of DMPC molecules and hence increases the hydration of the DMPC/cholesterol mixed bilayer. The conformational state of the headgroups of DMPC molecules in the mixed bilayer is also significantly changed. The phosphate group is closer to the surface compared with the pure DMPC bilayer. The conformation of the -O-C-C-N moiety changes from gauche to trans in the presence of cholesterol.     

Enhanced Lipid Diffusion and Mixing in Accelerated Molecular Dynamics

Accelerated molecular dynamics (aMD) is an enhanced sampling technique that expedites conformational space sampling by reducing the barriers separating various low-energy states of a system. Here, we present the first application of the aMD method on lipid membranes. Altogether, ～1.5 μs simulations were performed on three systems: a pure POPC bilayer, a pure DMPC bilayer, and a mixed POPC:DMPC bilayer. Overall, the aMD simulations are found to produce significant speedup in trans-gauche isomerization and lipid lateral diffusion versus those in conventional MD (cMD) simulations. Further comparison of a 70-ns aMD run and a 300-ns cMD run of the mixed POPC:DMPC bilayer shows that the two simulations yield similar lipid mixing behaviors, with aMD generating a 2-3-fold speedup compared to cMD. Our results demonstrate that the aMD method is an efficient approach for the study of bilayer structural and dynamic properties. On the basis of simulations of the three bilayer systems, we also discuss the impact of aMD parameters on various lipid properties, which can be used as a guideline for future aMD simulations of membrane systems.     

Diffusion of glycosylphosphatidylinositol (GPI)-anchored bovine prion protein (PrP) in supported lipid membranes studied by single-molecule and complementary ensemble methods

In this work cellular bovine prion protein (PrP^c) was incorporated in supported lipid membranes and its lateral diffusion was studied by single-dye tracking (SDT) and a complementary ensemble method, fluorescence recovery after photobleaching (FRAP). PrP^c was purified from calf brain with its native glycosylphosphatidylinositol (GPI) anchor and reconstituted into DMPC lipid vesicles. Homogeneous spreading on solid supports over macroscopic areas was confirmed with fluorescence microscopy. FRAP results demonstrated very high mobile fractions of up to 94%, confirming that most of the GPI-anchored PrP^c are freely diffusive in the fluid supported membrane matrix. Moreover, the lateral diffusivity of PrP^c significantly depends on the pH of the buffer, suggesting that the conformation of PrP^c and thus the frictional drag exerted to the protein molecule (and thus the effective hydrodynamic radius) is influenced by the effective net charge. To complement the ensemble results obtained by FRAP, the statistical variation of lateral diffusion coefficients of individual PrP^c molecules in the supported membranes were measured with SDT. Simulation-based statistical analysis indicated that in addition to the expected statistical scatter there is a significant spread of diffusion coefficients, while the average of the diffusion coefficients of individual proteins obtained by SDT is in excellent agreement with those measured by ensemble FRAP. In further experiments, PrP^c was laterally concentrated in the membrane by the application of tangential electric fields (membrane electrophoresis). However, the equilibrium concentration profile reached after 20 min was different from an exponential gradient. This finding suggests that PrP^c purified from bovine brain possesses non-uniform net charges. As the lateral diffusion coefficient of proteins in two-dimensional lipid membranes sensitively depends upon the frictional drag, the combination of SDT, ensemble FRAP, and membrane electrophoresis can be used as a powerful tool to gain insights into protein–protein binding and oligomer formation that would play a crucial role in infectious protein transmitted diseases such as BSE.