New Rh derivatives of s-indacene active in dehydrogenative silylation of styrene

The mono- and bimetallic complexes [(2,6-diethyl-4,8-dimethyl-s-indacenide){Rh(COD)}] (1), anti-[(2,6-diethyl-4,8-dimethyl-s-indacenediide){Rh(COD)}₂] (2a), syn-[(2,6-diethyl-4,8-dimethyl-s-indacenediide){Rh(COD)}₂] (2b) were synthesized and characterized spectroscopically and in the case of complex 2b, by means of X-ray diffraction. The ¹³C and ¹⁰³Rh NMR studies suggest that the bonding mode of the indacenediide ligand can be described as intermediate between η³- and η⁵-coordination. This result was confirmed by the crystal structure of 2b as evidenced by the slippage of the rhodium atom towards the periphery of the ligand. Cyclic voltammetry studies revealed a strong intermetallic communication through the fused ring ligand. This property was further illustrated by higher activity and selectivity of binuclear complexes 2 for the catalytic dehydrogenative silylation of styrene.     

Gold(I)-phosphine catalyst for the highly chemoselective dehydrogenative silylation of alcohols

[reaction: see text] A gold(I) complex of Xantphos AuCl(xantphos) catalyzes the dehydrogenative silylation of alcohols with high chemoselectivity and solvent tolerance. It is selective for the silylation of hydroxyl groups in the presence of alkenes, alkynes, alkyl halides (RCl, RBr), ketones, aldehydes, conjugated enones, esters, and carbamates.     

Mechanism of the dehydrogenative silylation of alcohols catalyzed by cationic gold complexes: an experimental and theoretical study

The catalytic activity both of cationic [(XDPP)Au][X] (XDPP = bis-2,5-diphenylphosphole xantphos X = BF(4)) and of the isolated gold hydride complex [(XDPP)(2)Au(2)H][OTf] in the dehydrogenative silylation process is presented. A parallel theoretical study using density functional theory revealed a mechanism involving the counter anion as a co-catalyst, which was experimentally confirmed by testing various counterions (X = OTf, NTf(2), PF(6)). Finally, a "Au(2)H(+)" species was determined as the intermediate during the catalytic cycle, which correlates well with the experimental findings on the first example of catalytic activity of an isolated "Au-H" complex.     

Homobenzotetramisole: an effective catalyst for kinetic resolution of aryl-cycloalkanols

Homobenzotetramisole (HBTM), a ring-expanded analogue of the previously reported catalyst BTM, displays higher catalytic activity and a different structure-selectivity profile. It displays good enantioselectivities in kinetic resolution of secondary benzylic alcohols but is particularly effective for 2-aryl-substituted cycloalkanols.     

Copper iodide nanoparticles-decorated porous polysulfonamide gel: As effective catalyst for decarboxylative synthesis of N-Arylsulfonamides

A porous cross-linked poly (ethyleneamine)-polysulfonamide (PEA-PSA) as a novel organic support system is synthesized in the presence of silica template by nanocasting technique. The paper demonstrates immobilization of CuI nanoparticles inside the pores (PEA-PSA@CuI) for the facile recovery and recycling of these nanoparticles. The presence of porous PEA-PSA and PEA-PSA@CuI nanocomposites was confirmed using FT-IR spectroscopy, FE-SEM, EDX, TGA, XRD, TEM, BET, XPS, WDX, ¹H NMR, and ICP-OES techniques. The PEA-PSA@CuI along with Ag(I)/K₂S₂O₈ was implemented as a reusable cooperative catalyst-oxidant system in the N-arylation of p-toluenesulfonamide with substituted carboxylic acids in mild condition. So, the novel decarboxylative cross-coupling catalyzed by copper and silver has been developed. Aromatic, secondary and tertiary aliphatic acids underwent high efficient decarboxylative processes with p-toluenesulfonamide to afford the corresponding products. This method provides a practical approach for the flexible synthesis of sulfonamides from the readily affordable substrates. The catalyst is highly reusable and efficient, especially in terms of time and yield of the desired product.     

A remarkably effective catalyst for the asymmetric transfer hydrogenation of aromatic ketones in water and air

A Rh(III) complex generated in situ from [Cp*RhCl2]2 and (1R,2R)-N-(p-toluenesulfonyl)-1,2-cyclohexanediamine (TsCYDN) serves as a remarkably effective, robust catalyst for the asymmetric transfer hydrogenation of aromatic ketones by HCOONa in water in air, affording alcohols in up to 99% ee.     

A new class of Rh(III) catalyst containing an aminoalcohol tethered to a tetramethylcyclopentadienyl group for asymmetric transfer hydrogenation of ketones

The synthesis and application to asymmetric reduction of acetophenone, of a novel class of Rh(III) catalyst containing a tether between the cyclopentadienyl group and a homochiral aminoalcohol, is described. The complex is a highly active catalyst for asymmetric ketone reduction, however it appears to be unstable to the extended reaction conditions. The well-defined stereochemical structure of the catalyst offers potential for significant improvement and ‘fine tuning’ towards specific substrates.     

Lithium chloride: an active and simple catalyst for cyanosilylation of aldehydes and ketones

LiCl acts as a highly effective catalyst for cyanosilylation of various aldehydes and ketones to the corresponding silylated cyanohydrins. The reaction proceeds smoothly with a substrate/catalyst molar ratio of 100-100,000 at 20-25 degrees C under solvent-free conditions. alpha,beta-Unsaturated aldehydes are completely converted to the 1,2-adducts. The cyanation products can be isolated by direct distillation of the reaction mixture.     

Supported ruthenium catalyst as an effective catalyst for selective oxidation of toluene

The investigation comprised an evaluation of the use of the catalyst 1%Ru/TiO₂ in the liquid-phase conversion of toluene to benzyl alcohol and benzaldehyde. Transmission electron microscopy (TEM) and N₂ adsorption-desorption isotherms were deployed to delineate the properties of the supported catalysts. The findings indicated a good catalytic performance by 1%Ru/TiO₂ under green reaction conditions. This performance was deemed a consequence of the spread and loading of Ru on the TiO₂. The reaction conditions such as temperature, reaction time, type of support, catalyst preparation method, and activating quantity) were optimized to achieve superior reaction parameters. Catalyst produced via sol-immobilization has higher activity than the one prepared with the wet-impregnation method, which lead to a transformation rate of up to 9.5%, with the selectivity for benzyl alcohol at 92%.     

Surface properties of the Ni-Cu-Cr oxide catalyst for dehydrogenative hydrolysis of amines

Catalysts for dehydrogenative hydrolysis of amines, prepared by sorption of copper ions from a solution on a preformed Ni-Cr oxide system, were studied by Auger electron spectroscopy, X-ray photoelectron spectroscopy, and IR spectroscopy of adsorbed CO and NH₃ probe molecules. It was shown that on adsorption copper blocked the chromium ions in the Ni-Cr catalyst with concomitant stabilization as Cu⁺. The incorporation of copper into the Ni-Cr system increased the ability of nickel to reduce water with the formation of oxygen-containing complexes.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 288–291, February, 1993.     

Montmorillonite K10: an effective catalyst for synthesis of 2-aminothiazoles

Research on Chemical Intermediates - An efficient one-pot synthesis of 2-aminothiazoles from methylcarbonyl and thiourea has been developed using montmorillonite-K10 as a catalyst at...     

Polybenzimidazole-supported [Rh(cod)Cl]2 complex: effective catalyst for the polymerization of substituted acetylenes

The first heterogeneous catalyst which affords polymerization of substituted acetylenes into readily available high molecular weight polymers is reported. The catalyst (Rh/PBI) has been prepared by supporting di-mu-chloro-bis(eta4-cycloocta-1,5-diene)dirhodium(I), [Rh(cod)Cl]2, on commercial polybenzimidazole (PBI) porous beads by means of a simple quantitative adsorption from THF solution, and tested in polymerization of phenylacetylene, 4-fluorophenylacetylene, and 4-pentylphenylacetylene. The polymer molecules formed were found to be released from the Rh/PBI to surrounding solution during the polymerization performed in THF. Formation of high molecular weight ((M)w values up to 325,000) polymers in prevailing cis-transoid configuration has been observed with all monomers. In a comparison with free [Rh(cod)Cl]2 used as the homogeneous catalyst, the Rh/PBI can be used repeatedly, exhibits somewhat lower polymerization activity but almost no oligomerization activity, and provides polymers of higher molecular weight.     

Intermolecular asymmetric reductive aldol reaction of ketones as acceptors promoted by chiral Rh(Phebox) catalyst

[reaction: see text] The conjugate reduction of cinnamates with hydrosilane and chiral Rh(Phebox-ip) catalyst in the presence of excess acetone is shown to provide the corresponding intermolecular reductive aldol product in extremely high enantioselectivity (up to 98%). Several cinnamates and crotonate substrates and several ketone acceptors were also examined.     

Montmorillonite K10 clay: an efficient catalyst for the one-pot stereoselective synthesis of beta-acetamido ketones

An efficient one-pot three-component coupling process for the synthesis of beta-acetamido ketones catalyzed by montmorillonite K10 clay is described. The reaction is highly stereoselective and the catalyst can be recycled.     

Silicomolybdic acid supported on silica gel: an efficient catalyst for Hosomi-Sakurai reactions

Silicomolybdic acid that is supported on silica gel (50 wt %) efficiently catalyzes the high-yielding Hosomi-Sakurai allylation of carbonyl compounds by allyltrimethylsilane in the presence of benzyl alcohol. The reaction rates of inactive substrates and the yields were greatly increased when preformed acetals were used as substrates.     

Immobilization of chiral Rh catalyst on glass and application to asymmetric transfer hydrogenation of aryl ketones in aqueous media

A chiral catalyst, Cp＊RhTsDPEN （Cp＊ = pentamethyl cyclopentadiene, TsDPEN = substitutive phenylsulfonyl-l,2-diphenylethylenediamine）, was synthesized and immobilized at the surface of glass. The immobilized catalyst exhibited good catalytic efficiency for asymmetric transfer hydrogenation of aromatic ketones in water with HCOONa as hydrogen source.     

C2-symmetric proline-derived tetraamine as highly effective catalyst for direct asymmetric Michael addition of ketones to chalcones

A C(2)-symmetric tetraamine catalyst was developed for the asymmetric Michael addition of ketones to chalcones. The corresponding adducts 1,5-dicarbonyl compounds were obtained in good chemical yields with high levels of diastereo- and enantioselectivities (up to >99 : 1 dr and 93% ee) under mild conditions. By studying the ESI-MS of the intermediates, a proposed mechanism was disclosed.     

Templated synthesis and catalytic properties of an Rh/ceria-zirconia catalyst

Ceria-zirconia nanophase with structural defects and high thermal stability was synthesized by a surfactant-templated method. The 0.5 wt.% Rh/ceria-zirconia catalyst shows high activity for NO reduction by CO under an oxygen-rich condition, and the selectivity to 100% N₂ below 200°C was achieved.     

Triazabicyclodecene: an effective isotope exchange catalyst in CDCl(3)

We describe the first effective H/D exchange reaction with acidic substrates in CDCl(3) at room temperature. The particularly mild reaction conditions involved (solvent, base, and temperature) allow the chemoselective deuteration of ketones over esters. An NMR study was conducted with the aim of rationalizing the results obtained in the presence of TBD as catalyst.