Strong mass injection at the surface of a blunt body in a supersonic flow

The case of supersonic flow over a blunt body when another gas is injected through the surface of the body in accordance with a given law is theoretically investigated. If molecular transport processes are neglected, the flow between the shock wave and the surface of the body should be regarded as two-layer, that is, as consisting of the flow in the shock layer between the shock wave and the contact surface and the flow in the layer of injected gas. A numerical solution of the problem is obtained near the front of the body and its accuracy is estimated. Approximate analytic solutions are obtained in the injected-gas layer: a constant-density solution and a solution of the boundary-layer type in the local similarity approximation. Near the flow axis the numerical and analytic solutions are fairly close, but at a distance from the axis the assumptions made reduce the accuracy of the approximate solutions. The flow in question can serve as a gas-dynamic model of a series of problems describing the radiant heating of blunt bodies in a hypersonic flow. In the presence of intense radiative heat transfer, vaporization is so great that the thickness of the vapor layer is comparable with the thickness of the shock layer. Moreover, the thermal shielding of various kinds of obstacles in channels through which a radiating plasma flows can be organized by means of the forced injection of a strong absorber. The formulation of a similar problem was reported in [1], but the results of the solution were not given. A two-layer model of the flow of an ideal gas over a blunt body was used in [2, 3] for the analysis of radiative heat transfer. In [2] the neighborhood of the stagnation point is considered. In [3] preliminary results relating to two-layer flow over blunt cones are presented. The solution is obtained by Maslen's approximate method.Moscow. Translated from Izvestiya Akademii Nauk SSSR. Mekhanika Zhidkosti i Gaza, No. 2, pp. 89–97, March–April, 1972.     

Supersonic nonuniform viscous gas flow past a blunt body with supply of gas from the surface

The problem of axisymmetric nonuniform gas flow past smooth blunt bodies at high Mach numbers is investigated. The approach stream is a parallel axisymmetric flow in which the velocity and temperature depend on the radial distance from the axis of symmetry and the pressure is constant. On the axis of symmetry the velocity has a minimum and the temperature a maximum. A characteristic feature of this flow is the existence of two qualitatively different flow regimes: separated [1-4], when in the shock layer on the front of the body there is a closed region of reverse-circulating flow, and unseparated [5, 6], when there is no such zone. In this study the case of unseparated flow is investigated. The equations of a thin viscous shock layer with generalized Rankine-Hugoniot conditions at the shock and boundary conditions on the body that take into account the supply of gas from the surface are solved numerically. The effect of the gas supply on the conditions of unseparated flow is analyzed in relation to the Reynolds number, and the critical values of the nonuniformity parameter a = a_k [5] are obtained. It is shown that at high Reynolds numbers the supply of gas from the surface has practically no effect on a_k, while at low and intermediate Reynolds numbers it reduces the region of unseparated flow. For high Reynolds numbers and an intense supply of gas from the surface an asymptotic solution of the problem is obtained for the neighborhood of the stagnation point. This is compared with the numerical solution.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 4, pp. 122–129, July–August, 1988.The authors wish to thank G. A. Tirskii for useful discussions of the results.     

Numerical investigation of unsteady shock waves in vapor-gas-droplet mixtures

The results of mathematical modeling of the evolution of unsteady shock waves in two-phase mixtures of inert gas, vapor and suspended liquid droplets with allowance for dynamic, thermal and mass phase interaction processes are presented. The influence of interphase mass transfer effects (droplet breakdown and evaporation, vapor condensation) on the structure of unsteady shock waves in vapor-gas-droplet mixtures is analyzed. The important influence of phase mass transfer and, in particular, droplet breakdown as a result of surface layer stripping by the gas flow on the distribution of the parameters of the carrier and dispersed components of the mixture behind the shock front is demonstrated. The effect of the principal governing parameters of the two-phase mixture on the unsteady shock wave propagation process is analyzed.Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No.4, pp. 67–75, July–August, 1992.     

Investigation of the influence of blowing on the flow in a hypersonic viscous shock layer near the stagnation streamline on a blunt body

In the framework of the approximation of local similarity to the Navier-Stokes equations, an investigation is made of the axisymmetric flow of homogeneous gas in a hypersonic shock layer, this including the region of transition through the shock wave. Boundary conditions, which take into account blowing of gas, are specified on the surface of the body and in the undisturbed flow. A numerical solution to the problem is obtained in a wide range of variation of the Reynolds number and the blowing parameter. Expressions are found for the dependences on the blowing parameter usually employed in boundary layer theory of the coefficients of friction and heat transfer on the surface of the body, which are divided by their values obtained for blowing parameter equal to zero. It is shown that these dependences are universal and the same as the dependences obtained from the solution of the equations of a hypersonic viscous shock layer with modified Rankin-Hugoniot relations across the shock wave and from the solution of the boundary layer equations.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 199–202, January–February, 1980.     

Strong blowing on the surfaces of a body immersed in a supersonic gas stream

This article considers the problem of strong blowing on the surface of a body immersed in a supersonic gas flow. It is not difficult to show that for intense blowing the motion of the blown gas can be described by the Euler equations, and viscosity and transport effects appear only in the neighborhood of the contact surface separating the oncoming flow and the blown gas. It is shown that to a first approximation the pressure is constant across the layer and equal to the pressure at the contact surface.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, pp. 97–104, No. 5, September–October, 1973.     

Asymptotic solution of the euler equations in the shock layer on a blunt body in nonuniform flow with gas injection from the body surface

Supersonic nonuniform gas flow over blunt bodies without surface injection has previously been investigated by both numerical [1–3] and experimental [3] methods. The processes of surface vaporization under the influence of an intense heat flux, artificial gas injection and surface combustion [4] are all worthy of study. The problem of the interaction between a nonuniform supersonic flow and a body in the presence of intense gas injection from the surface is examined and an analytical solution is constructed.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 126–134, November–December, 1989.     

Experimental investigation of supersonic flow past blunt bodies with strong distributed injection

The entry of bodies into planetary atmospheres at high supersonic velocities is accompanied by intense evaporation of the surface due to radiative heat fluxes. A series of problems involving the conduction of investigations of such kind has been proposed by Petrov. In [1], in particular, the entry of a meteorite into an atmosphere was examined. The gasdynamic aspects of this problem have been approximately simulated by many authors by intense injection of gas in theoretical, e.g., [2–5], and experimental [6, 7] studies. The theoretical studies were based on two-layer [3, 4] or three-layer [5] schemes of gas flow between the shock wave and the surface of the body. The aim of the present work was an experimental investigation of the interaction of injection with a counter supersonic flow.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 84–95, May–June, 1978.     

Blowing of a foreign gas in a hypersonic viscous shock layer

We consider the problem of a hypersonic viscous flow of a nonreactive mixture of ideal gases around smooth thick bodies in the framework of a two-layer model of a thin shock layer for moderately small Reynolds numbers. We investigate the effect of blowing of a foreign gas through a permeable surface in the bow region of a spherical blunt body. We introduce a transformation of variables that gives a number of important advantages in the numerical solution of the problem under consideration. The problem of mass blowing from the surface of a body into a boundary layer has an extensive literature. The effect of blowing for moderately small Reynolds numbers has been considerably less studied [1–5], and in the majority of papers on this question either the critical point of a blunt body or the blowing of a gas homogeneous with the gas in the incoming flow is investigated.Moscow. Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 4, pp. 110–116, July–August, 1972.     

Method of mean-mass parameters for a three-dimensional boundary layer in a flow with vorticity

When a gas flows with hypersonic velocity over a slender blunt body, the bow shock induces large entropy gradients and vorticity near the wall in the disturbed flow region (in the high-entropy layer) [1]. The boundary layer on the body develops in an essentially inhomogeneous inviscid flow, so that it is necessary to take into account the difference between the values of the gas parameters on the outer edge of the boundary layer and their values on the wall in the inviscid flow. This vortex interaction is usually accompanied by a growth in the frictional stress and heat flux at the wall [2, 3]. In three-dimensional flows in which the spreading of the gas on the windward sections of the body causes the high-entropy layer to become narrower, the vortex interaction can be expected to be particularly important. The first investigations in this direction [4–6] studied the attachment lines of a three-dimensional boundary layer. The method proposed in the present paper for calculating the heat transfer generalizes the approach realized in [5] for the attachment lines and makes it possible to take into account this effect on the complete surface of a blunt body for three-dimensional laminar, transition, or turbulent flow regime in the boundary layer.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 80–87, January–February, 1981.     

Some effects of strong blowing of gas into a supersonic flow

The intense evaporation of bodies moving in the atmospheres of planets at high supersonic velocities has been partly simulated both theoretically [1–5] (numerical calculations of strong blowing in the framework of the Navier-Stokes equations were also made at the Scientific-Research Institute of Mechanics at the Moscow State University by É. A. Gershbein and A. F. Kolesnikov [6]) as well as experimentally [7–9]. Below, the results are given of investigations of strong blowing of gas from the flat end of a cylinder into a supersonic flow at Reynolds numbers such that the mixing layer separating the blown and the oncoming gas is fairly thin. In this case, the mixing layer can be regarded as a contact surface, so that the problem of blowing can be solved in the framework of Euler's equations. The results of a numerical solution are compared with the results of experiments on the separation and profile of the shock wave, the thickness of the blowing layer on the axis, and also on the pressure distribution on the end of the cylinder. It was established experimentally, and then confirmed numerically that there is a downwash of the blown gas on the periphery of a porous end. It is shown that for the same blowing parameter K, which is equal to the ratio of the dynamic head of the blown gas to the dynamic head of the oncoming gas, and for a given distribution of K over the surface of the body the contact surface tends to a certain limiting position with increasing Mach number of the oncoming flow, i.e., the profile of the contact surface is stabilized. The influence of the adiabatic exponent on the thickness of the blowing layer is estimated. The present investigations continue earlier experimental studies, the main results of which have been presented in [9].Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 91–98, January–February, 1980.     

Viscous hypersonic flows for various aerophysical models

The results of mathematical simulation of hypersonic air flow past a sphere with allowance for chemical nonequilibrium and ionization are presented. The calculated data are obtained on the basis of a numerical solution of the Navier-Stokes equations and the hypersonic viscous shock layer equations. The equilibrium radiation temperature of the body surface, the pressure, and the shock wave detachment are compared for these models. The combined effect of molecular transport and the catalytic properties of the body surface on the aerodynamic heating is analyzed. The results of the effect of certain models of the thermochemical disequilibrium of the gas on the temperature of the body surface are also analyzed along a heat-stressed interval of the reentry trajectory of an aerospace vehicle.Moscow. Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 4, pp. 151–161, July–August, 1996.     

Hypersonic flow past a wing at large angles of attack with detached shock wave

The thin shock layer method [1–3] has been used to solve the problem of hypersonic flow past the windward surface of a delta wing at large angles of attack, when the shock wave is detached from the leading edge (but attached to the apex of the wing) and the velocity of the gas in the shock layer is of the same order as the speed of sound. A classification of the regimes of flow past a delta wing at large angles of attack has been made. A general solution has been obtained for the problem of three-dimensional hypersonic flow past the wing allowing for nonequilibrium physicochemical processes of thermal radiation of the gas at high temperatures.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 149–157, May–June, 1985.     

Viscous shock layer near the stagnation point on a rotating body with unsteady injection and surface cooling

Unsteady supersonic flow regimes in the neighborhood of a stagnation point are investigated on the basis of a system of viscous shock layer equations [10] containing all the terms of the Euler equations and the boundary layer equations. An analytic solution of the unsteady equations valid near the surface of the body is found in the case of strong injection. The unsteady equations of the viscous shock layer are solved numerically on the basis of a divergent implicit scheme of the second order of approximation across the shock layer, using Newtonian linearization and vector sweep methods with allowance for the boundary relations on the surface of the body and at the isolated bow shock. Certain calculation results illustrating the effect of injection, surface cooling, the swirl of the external flow and the angular velocity of the body on the structure of the steady and unsteady viscous shock layer are presented.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 114–122, September–October, 1987.     

Investigation of a hypersonic viscous shock layer on rotating axisymmetric bodies in the presence of blowing

The hypersonic flow of a laminar stream of viscous compressible gas past blunt axisyrametric bodies rotating about the longitudinal axis is considered. It is assumed that gas blows from the surface of the body. The solution of the problem is obtained by a finite-difference method in a wide range of Reynolds numbers and blowing and rotation parameters. Some results of the calculations characterizing the effect of the rotation on the velocity and temperature profiles across the shock layer, on the friction and heat transfer coefficients, and the shock wave separation are given for the neighborhood of the stagnation point. For large Reynolds numbers and strong blowing an analytic solution of the problem is found in an approximation of two inviscid layers separated by a contact surface. The calculations are made for the flow past a sphere and a paraboloid and it is shown that in the presence of rotation the maximum of the heat flux is shifted from the stagnation point onto the side surface of the body. The dependence of the pressure distribution, the heat flux, and the friction coefficient is investigated for cases of constant and variable blowing over the contour of the body.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 106–114, January–February, 1986.     

Investigation of the hypersonic viscous shock layer around blunt bodies in a nonuniform flow

Unseparated viscous gas flow past a body is numerically investigated within the framework of the theory of a thin viscous shock layer [13–15]. The equations of the hypersonic viscous shock layer with generalized Rankine-Hugoniot conditions at the shock wave are solved by a finite-difference method [16] over a broad interval of Reynolds numbers and values of the temperature factor and nonuniformity parameters. Calculation results characterizing the effect of free-stream nonuniformity on the velocity and temperature profiles across the shock layer, the friction and heat transfer coefficients and the shock wave standoff distance are presented. The unseparated flow conditions are investigated and the critical values of the nonuniformity parameter a_k [10] at which reverse-circulatory zones develop on the front of the body are obtained as a function of the Reynolds number. The calculations are compared with the asymptotic solutions [10, 12].Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 154–159, May–June, 1987.     

Hypersonic viscous shock layer on sweptback wings of infinite span at different angles of attack

A study is made of the flow of a viscous compressible gas in a hypersonic shock layer on sweptback wings of infinite span with blunt leading edge at different angles of attack. The equations of the hypersonic viscous shock layer with modified Rankine-Hugoniot relations across the shock wave and boundary conditions on the surface of the body that take into account slip and discontinuity of the temperature are solved by a method of successive approximation which yields not only an analytic solution for the first approximations but also an exact numerical solution when the method is implemented on a computer. The analytic solution of the problem is found in the first approximation. Expressions are obtained for the coefficients of friction and heat transfer on the surface of the body, and also for the profiles of the velocities and the temperature across the shock layer. Comparison of the analytic solution with the numerical solution reveals a satisfactory accuracy of the analytic solution for not too large Reynolds numbers.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 91–102, March–April, 1979.We thank G. A. Tirskii for his interest in the work and valuable discussions.     

Two-phase mass injection from the stagnation zone of a blunt body in a hypersonic flow

A mathematical model of the hypersonic steady gas flow over the stagnation zone of an axisymmetric blunt body with given two-phase injection from the surface is proposed. The two-continuum model of a dusty gas [3] is used for describing the flow in the region of the wall. The problem is solved in the boundary layer and thin viscous shock layer approximations. On the basis of the numerical calculations the distribution of the parameters of the carrier and dispersed phases near the axis of symmetry is obtained. The similarity parameters determining the convective heat transfer are found. The stagnation point heat fluxes with and without particles are compared. The range of parameters on which particles can significantly reduce the heat transfer is determined.Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No.4, pp. 60–66, July–August, 1992.     

Effect of Gas Injection from the Surface of a Body on Its Interaction with a Temperature Inhomogeneity in a Supersonic Flow

The flow pattern in the shock layer and the aerodynamic characteristics of a hemisphere in unsteady axisymmetric interaction with a closed spherical hot-gas region embedded in the oncoming supersonic flow in the presence of intense injection of gas from the body surface into the shock layer are studied on the basis of the inviscid perfect gas model. Two cases are considered, namely, (1) when the radius of the permeable surface is greater than that of the temperature inhomogeneity and (2) when the injection is localized in the vicinity of the forward stagnation point and the permeable region is smaller the inhomogeneity.     

Investigation of hypersonic flow of rarefied gas past wings of infinite span

In the framework of the locally self-similar approximation of the Navier-Stokes equations an investigation is made of the flow of homogeneous gas in a hypersonic viscous shock layer, including the transition region through the shock wave, on wings of infinite span with rounded leading edge. The neighborhood of the stagnation line is considered. The boundary conditions, which take into account blowing or suction of gas, are specified on the surface of the body and in the undisturbed flow. A method of numerical solution of the problem proposed by Gershbein and Kolesnikov [1] and generalized to the case of flow past wings at different angles of slip is used. A solution to the problem is found in a wide range of variation of the Reynolds numbers, the blowing (suction) parameter, and the angle of slip. Flow past wings with rounded leading edge at different angles of slip has been investigated earlier only in the framework of the boundary layer equations (see, for example, [2], which gives a brief review of early studies) or a hypersonic viscous shock layer [3].Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 150–154, May–June, 1984.     

Supersonic flow past a cylinder with a fluid flare

The aerodynamic parameters and the pressure distribution over the surface of a cylinder in a steady axisymmetric supersonic flow is studied within the framework of the inviscid perfect gas model in the absence and the presence of combined intense air injection fromthe flat face and the lateral surface into the shock layer. The purpose of the study is to investigate the effect of gas blowing from different regions of the cylindrical surface on the supersonic axisymmetric flow past the body.