Influence of MgO template on carbon dioxide adsorption of cation exchange resin-based nanoporous carbon

In this work, porous carbons with well-developed pore structures were directly prepared from a weak acid cation exchange resin (CER) by the carbonization of a mixture with Mg acetate in different ratios. The effect of the Mg acetate-to-CER ratio on the pore structure and CO(2) adsorption capacities of the obtained porous carbons was studied. The textural properties and morphologies of the porous carbons were analyzed via N(2)/77K adsorption/desorption isotherms, SEM, and TEM, respectively. The CO(2) adsorption capacities of the prepared porous carbons were measured at 298 K and 1 bar and 30 bar. By dissolving the MgO template, the porous carbons exhibited high specific surface areas (326-1276 m(2)/g) and high pore volumes (0.258-0.687 cm(3)/g). The CO(2) adsorption capacities of the porous carbons were enhanced to 164.4 mg/g at 1 bar and 1045 mg/g at 30 bar by increasing the Mg acetate-to-CER ratio. This result indicates that CER was one of the carbon precursors to producing the porous structure, as well as for improving the CO(2) adsorption capacities of the carbon species.     

氮硫双掺杂活性炭材料的制备和电容性能

以头发和蔗糖为原料, 通过水热碳化和KOH活化两步法制备了氮硫双掺杂微孔炭材料. 利用扫描电子显微镜, 透射电子显微镜, 氮气吸脱附, X射线光电子能谱, 电子能谱和傅里叶交换红外光谱等手段系统表征了所制备活性炭材料的微观形貌, 孔隙结构和表面化学性质. 并在6 mol·L^-1 KOH溶液中研究了所制备活性炭材料的电容性能. 氮气吸脱附测试表明, 所制备活性炭材料的比表面积最高可达1849.4 m²·g^-1, 孔道以微孔为主. 所制备活性炭材料氮元素含量为1.6%-2.5% (原子分数(x))), 硫元素含量为0.2%-0.5% (x). 由于N、O、S官能团的协同作用, 所制备碳材料表现出明显的赝电容. 活性炭材料的比电容值最高可达200 F·g^-1, 对应的能量密度为6.9 Wh·kg^-1. 功率密度达到10000 W·kg^-1时, 能量密度仍达到4.1 Wh·kg^-1. 本文的工作表明以生物质为原料可以方便制备氮硫双掺杂活性炭电极材料.     

New phosphorus-containing spherical carbon adsorbents as promising materials in drug adsorption and release

A simple method of preparation of new high surface area spherical carbon adsorbents is presented. The phosphoric acid activation upon hydrothermally formed spherules was employed to produce carbons having controlled high specific surface area (over 2100m(2)/g), large volumes of pores (1.2cm(3)/g), and high acidity. Prepared from sucrose materials show high adsorption capacities (i.e. 220mg/g(C)) toward paracetamol. It is proved that for these materials the contents of surface phosphorus are responsible for the reversibility of drug adsorption/release process.     

Interaction of amphetamine and its N-alkyl-substituted derivatives with micro- and mesoporous adsorbents in polar liquids

The process of concentrating amphetamine (1-phenyl-2-propanamine, C6H5CH2CH(NH2)CH3) and its N-alkyl substituted derivatives C6H5CH2CH(NHR)CH3 and C6H5CH2CH(N(CH3)R)CH3 (R=(CH2)(n)CH3 at n=0, 1, 2, and 3) from diluted aqueous solution was investigated using six adsorbents having different textures and chemical compositions. Three chemically modified carbon adsorbents prepared from plum stones and routinely used SPE cartridges packed with graphitized adsorbents such as Hypercarb and Envicarb and polymeric LiChrolut EN were applied. Recovery rates of amphetamines increase nearly linearly with growing free energy of solvation due to better adsorption of amphetamines with larger side groups from polar solution. Reduction of a carbon surface leads to a decrease in the recovery rate. Its minimal values are observed for the adsorption of amphetamines on graphitized carbons due to both lower adsorption and worse desorption (elution) in comparison with those for activated carbons.     

不同孔径的介孔碳分子筛对VB12的吸附性质研究

摘要利用SBA-15为模板, 在不同温度下合成了孔径大小在3.7(CMK-3-100)和6-3 nm(CMK-3-150)之间的介孔碳， 以其作为吸附剂, 研究了它们在水溶液中对VB12的吸附作用. 结果表明, CMK-3-130与CMK-3-100和CMK-3-150相比， 表现出对VB12最大的吸附能力(吸附能力为412.5 mg/g), 这是因为它有比较高的有序结构和比较大的孔容.     

Enhanced hydrogen storage capacity of high surface area zeolite-like carbon materials

We report the synthesis of zeolite-like carbon materials that exhibit well-resolved powder XRD patterns and very high surface area. The zeolite-like carbons are prepared via chemical vapor deposition (CVD) at 800 or 850 degrees C using zeolite beta as solid template and acetonitrile as carbon precursor. The zeolite-like structural ordering of the carbon materials is indicated by powder XRD patterns with at least two well-resolved diffraction peaks and TEM images that reveal well-ordered micropore channels. The carbons possess surface area of up to 3200 m2/g and pore volume of up to 2.41 cm3/g. A significant proportion of the porosity in the carbons (up to 76% and 56% for surface area and pore volume, respectively) is from micropores. Both TEM and nitrogen sorption data indicate that porosity is dominated by pores of size 0.6-0.8 nm. The carbon materials exhibit enhanced (and reversible) hydrogen storage capacity, with measured uptake of up to 6.9 wt % and estimated maximum of 8.33 wt % at -196 degrees C and 20 bar. At 1 bar, hydrogen uptake capacity as high as 2.6 wt % is achieved. Isosteric heat of adsorption of 8.2 kJ/mol indicates a favorable interaction between hydrogen and the surface of the carbons. The hydrogen uptake capacity observed for the zeolite-like carbon materials is among the highest ever reported for carbon (activated carbon, mesoporous carbon, CNTs) or any other (MOFs, zeolites) porous material.     

Pt/DNA-MWCNTs/GC电极制备及其H2O2还原的电催化活性

将DNA功能化多壁碳纳米管（MWCNTs）复合材料修饰于玻碳基底（GC）表面制得DNA-MWCNTs/GC电极,并在此基础上电沉积负载Pt纳米颗粒构建了一种新型无酶H₂O₂传感电极. 利用扫描电子显微镜（SEM）表征制得的修饰电极,同时通过循环伏安法和计时电流法研究了该传感电极的H2O2响应性能. 结果表明,该传感电极的H₂O₂检测在0.04 ~ 18.07 mmol·L^-1浓度范围内成线性相关,检出限3.85 μmol·L^-1（S/N = 3）,且有良好的重现性、稳定性与选择性.     

Preparation and hydrogen storage properties of zeolite-templated carbon materials nanocast via chemical vapor deposition: effect of the zeolite template and nitrogen doping

Carbon materials have been prepared using zeolite 13X or zeolite Y as template and acetonitrile or ethylene as carbon source via chemical vapor deposition (CVD) at 550-1000 degrees C. Materials obtained from acetonitrile at 750-850 degrees C (zeolite 13X) or 750-900 degrees C (zeolite Y) have high surface area (1170-1920 m(2)/g), high pore volume (0.75-1.4 cm(3) g(-1)), and exhibit some structural ordering replicated from the zeolite templates. Templating with zeolite Y generally results in materials with higher surface area. High CVD temperature (> or =900 degrees C) results in low surface area materials that have significant proportions of graphitic carbon and no zeolite-type structural ordering. The nitrogen content of the samples derived from acetonitrile varies between 5 and 8 wt %. When ethylene is used as a carbon precursor, high surface area (800-1300 m(2)/g) materials are only obtained at lower CVD temperature (550-750 degrees C). The ethylene-derived carbons retain some zeolite-type pore channel ordering but also exhibit significant levels of graphitization even at low CVD temperature. In general, the carbon materials retain the particle morphology of the zeolite templates, with solid-core particles obtained at 750-850 degrees C while hollow shells are generated at higher CVD temperature (> or =900 degrees C). We observed hydrogen uptake of up to 4.5 wt % and 45 g H(2)/L (volumetric density) at -196 degrees C and 20 bar for the carbon materials. The hydrogen uptake was found to be dependent on surface area and was therefore influenced by the choice of zeolite template and carbon source. Zeolite Y-templated N-doped carbons had the highest hydrogen uptake capacity. Gravimetric and volumetric methods gave similar uptake capacity at 1 bar (i.e., 1.6 and 2.0 wt % for zeolite 13X and Y-templated N-doped carbons, respectively). Our findings show that zeolite-templated carbons are attractive for hydrogen storage and highlight the potential benefits of functionalization (nitrogen-doping).     

Synthesis,characterization, and KOH activation of nanoporous carbon for increasing CO2 adsorption capacity

Ordered nanoporous carbons (ONCs) were prepared using a soft-templating method. To improve the CO₂ adsorption efficiency, ONCs were chemically activated to obtain high specific surface area and micro-/mesopore volume with different KOH amounts (i.e., 0, 1, 2, 3, and 4) as an activating agent. The prepared nanoporous carbons (NCs) materials were analyzed by low-angle X-ray diffraction for confirmation of synthesized ONCs structures. The structural properties of the NCs materials were analyzed by high-angle X-ray diffraction. The textural properties of the NCs materials were examined using the N₂/77 K adsorption isotherms according to the Brunauer–Emmett–Teller equation. The CO₂ adsorption capacity was measured by CO₂ isothermal adsorption at 298 K/1 bar. From the results, the NCs activated with KOH showed that the increasing specific surface areas and total pore volumes resulted in the enhancement of CO₂ adsorption capacity.     

电化学双电层电容器电极材料——豌豆荚基活性炭的制备与表征

以豌豆荚为碳源、ZnCl₂或KOH为活化剂制备了活性炭, 并用作双电层电容器的电极材料. 采用比表面及孔隙度分析仪表征了豌豆荚基活性炭的孔结构. 通过KOH或ZnCl₂活化后, 活性炭比表面积从1.69 m²·g^-1增大到2237或621 m²·g^-1. 采用循环伏安法和恒流充放电测试技术表征了豌豆荚基活性炭的电化学特性. 结果表明: 在6 mol·L^-1 KOH溶液中经KOH活化处理的活性炭的质量比电容高达297.5 F·g^-1, 并具有良好的充放电稳定性, 在5 A·g^-1的高电流密度下循环充放电500次后, 质量比电容仅衰减8.6%.     

Boron and nitrogen-rich carbons from ionic liquid precursors with tailorable surface properties

A novel strategy for tailoring the adsorption and structural properties of ionic liquid derived carbons has been developed. By changing the carbonization temperature and ratios of ionic liquids (ILs) containing a cross-linkable anion, such as 1-butyl-3-methylimidazolium tricyanomethanide [BMIm][C(CN)(3)] and 1-ethyl-3-methylimidazolium tetracyanoborate [EMIm][B(CN)(4)], boron and nitrogen-rich carbons with slit-like pores and specific surface areas exceeding 500 m(2) g(-1) have been prepared. Furthermore, the nitrogen-rich carbons exhibit high adsorption capacity for CO(2) adsorption and selectivity for CO(2)/N(2) separation.     

A facile soft-template synthesis of nitrogen doped mesoporous carbons for hydrogen sulfide removal

A series of nitrogen-doped mesoporous carbons (NMCs) were prepared using Pluronic F127 as a structure directing agent, phloroglucinol and formaldehyde as carbon precursor and dicyandiamide as nitrogen source. The obtained nitrogen-doped mesoporous carbons possess high nitrogen content of 6.37–19.28 wt%. Due to the feature of high nitrogen contents, NMCs show superior H₂S adsorption performance with breakthrough sulfur capacity of 0.48 mmol g^?1 at room temperature and ambient pressure. It is revealed that in addition to the nitrogen content, nitrogen configuration and porosity of the carbon materials also influence significantly their sulfur capacity. This work offers a facile strategy for the synthesis of porous carbon materials with excellent performance in the adsorptive removal of H₂S.     

Adsorption of aqueous metal ions on oxygen and nitrogen functionalized nanoporous activated carbons

In this study, the adsorption characteristics of two series of oxygen and nitrogen functionalized activated carbons were investigated. These series were a low nitrogen content (approximately 1 wt % daf) carbon series derived from coconut shell and a high nitrogen content (approximately 8 wt % daf) carbon series derived from polyacrylonitrile. In both series, the oxygen contents were varied over the range approximately 2-22 wt % daf. The porous structures of the functionalized activated carbons were characterized using N(2) (77 K) and CO(2) (273 K) adsorption. Only minor changes in the porous structure were observed in both series. This allowed the effect of changes in functional group concentrations on metal ion adsorption to be studied without major influences due to differences in porous structure characteristics. The surface group characteristics were examined by Fourier transform infrared (FTIR) spectroscopy, acid/base titrations, and measurement of the point of zero charge (pH(PZC)). The adsorption of aqueous metal ion species, M(2+)(aq), on acidic oxygen functional group sites mainly involves an ion exchange mechanism. The ratios of protons displaced to the amount of M(2+)(aq) metal species adsorbed have a linear relationship for the carbons with pH(PZC) < or = 4.15. Hydrolysis of metal species in solution may affect the adsorption of metal ion species and displacement of protons. In the case of basic carbons, both protons and metal ions are adsorbed on the carbons. The complex nature of competitive adsorption between the proton and metal ion species and the amphoteric character of carbon surfaces are discussed in relation to the mechanism of adsorption.     

Comparisons of porous and adsorption properties of carbons activated by steam and KOH

In this work, fir woods and pistachio shells were used as source materials to prepare porous carbons, which were activated by physical (steam) and chemical (KOH) methods. Pore properties of these activated carbons including the BET surface area, pore volume, pore size distribution, and pore diameter were first characterized by a t-plot method based on N(2) adsorption isotherms. Highly porous activated carbons with BET surface area up to 1009-1096 m(2)/g were obtained. The steam and KOH activation methods produced carbons with mesopore content in the range 9-15 and 33-49%, respectively. The adsorption equilibria and kinetics of tannic acid, methylene blue, 4-chlorophenol, and phenol from water on such carbons at 30 degrees C were then investigated to check their chemical characteristics. The Freundlich equation gave a better fit to all adsorption isotherms than the Langmuir equation. On the other hand, the intraparticle diffusion model could best follow all adsorption processes. In comparison with KOH-activated carbons, it was shown that the rate of external surface adsorption with steam-activated carbons was significantly higher but the rate of intraparticle diffusion was much lower.     

Comparative study for the removal of methylene blue via adsorption and photocatalytic degradation

Physically and chemically activated carbons were prepared from date pits and olive stones. Titania and WO(x)-TiO(2)/MCM-41 were prepared as photoactive catalysts. Surface characterizations were investigated from ash content, pH, base neutralization capacities and FT-IR techniques. The textural characteristics, namely specific surface area (S(BET)) and pore texture, were determined from low temperature adsorption of N(2) at 77 K. The decolorization of aqueous solution of methylene blue was performed by means of two alternative methods. Steam-activated carbons own higher surface area compared with ZnCl(2)-activated carbons, and the micropore surface area represents the major contribution of the total area. Steam-activated carbons were the most efficient decolorizing adsorbents owing to its higher surface area, total pore volume and the basic nature of the surface. The calculated values of DeltaG(0), DeltaH(0) and DeltaS(0) indicate the spontaneous behavior of adsorption. The photocatalytic degradation is more convenient method in decolorizing of methylene blue compared with the adsorption process onto activated carbons.     

Li-ion charge storage performance of wood-derived carbon fibers@MnO as a battery anode

Wood-derived carbons have been demonstrated to have large specific capacities as the anode materials of lithium-ion batteries(LIBs). However, these carbons generally show low tap density and minor volumetric capacity because of high specific surface area and pore volume. Combination with metal oxide is one of the expected methods to alleviate the obstacles of wood-derived carbons. In this work, the composites of Mn O loaded wood-derived carbon fibers(CF@Mn O) were prepared via a simple and envir...     

Preparation of carbon coated Fe3O4 nanoparticles and their application for solid-phase extraction of polycyclic aromatic hydrocarbons from environmental water samples

The carbon coated Fe₃O₄ nanoparticles (Fe₃O₄/C) were synthesized by a simple hydrothermal reaction and applied as solid-phase extraction (SPE) sorbents to extract trace polycyclic aromatic hydrocarbons (PAHs) from environmental water samples. The Fe₃O₄/C sorbents possess high adsorption capacity and extraction efficiency due to strong adsorption ability of carbon materials and large surface area of nanoparticles, and only 50 mg of sorbents are required to extract PAHs from 1000 mL water samples. The adsorption attains equilibrium rapidly and analytes are eluted with acetonitrile readily. Salinity and solution pH have no obvious effect on the recoveries of PAHs, which avoids fussy adjustment to water sample before extraction. Under optimized conditions, the detection limits of PAHs are in the range of 0.2–0.6 ng L⁻¹. The accuracy of the method was evaluated by the recoveries of spiked samples. Good recoveries (76–110%) with low relative standard deviations from 0.8% to 9.7% are achieved. This new SPE method provides several advantages, such as high extraction efficiency, high breakthrough volumes, convenient extraction procedure, and short analysis times. To our knowledge, this is the first time that Fe₃O₄/C nanoparticles are used for the pretreatment of environmental water samples.     

Porous properties of activated carbons from waste newspaper prepared by chemical and physical activation

Activated carbons were prepared from old newspaper and paper prepared from simulated paper sludge by chemical activation using various alkali carbonates and hydroxides as activating reagents and also by physical activation using steam. In the chemical activation, the influence of oxidation, carbonization, and activation on the porous properties of the resulting activated carbons was investigated. The specific surface areas (S(BET)) of the activated carbons prepared by single-step activation (direct activation without oxidation and carbonization) were higher than those resulting from two-step activation (oxidation-activation and carbonization-activation) and three-step activation (oxidation-carbonization-activation) methods. The S(BET) values were strongly dependent on the activating reagents and the activating conditions, being >1000 m(2)/g using K(2)CO(3), Rb(2)CO(3), Cs(2)CO(3), and KOH as activating reagents but <1000 m(2)/g using Li(2)CO(3), Na(2)CO(3), and NaOH. These differences in S(BET) values are suggested to be related to the ionic radii of the alkalis used as activating reagents. The microstructures of the higher S(BET) samples show a complete loss of fiber shape but those of the lower S(BET) samples maintain the shape. In the physical activation, the porous properties of the activated carbons prepared by the single-step method were examined as a function of the production conditions such as activation temperature, activation time, steam concentration, and flow rate of the carrier gas. The maximum S(BET) and total pore volume (V(P)) were 1086 m(2)/g and 1.01 ml/g, obtained by activation at 850 degrees C for 2 h, flowing 20 mol% of steam in nitrogen gas at 0.5 l/min. A correlation was found between S(BET) and the yield of the product, the maximum S(BET) value corresponding to a product yield of about 10%. This result is suggested to result from competition between pore formation and surface erosion. Compared with chemically activated carbons using K(2)CO(3), the porous properties of the physically activated carbons have lower S(BET) and V(P) values because of the smaller size and lower volume of their micropores. On the other hand, they retain the original fiber shape and the paper sheet morphology after activation.     

Effective photocatalytic degradation of atrazine over titania-coated carbon nanotubes (CNTs) coupled with microwave energy

Microwave-assisted photocatalytic (MAPC) degradation of atrazine over nanotitania coated multiwalled carbon nanotubes (TiO(2)/MWCNTs) was investigated in this study. As a result, degradation efficiency of atrazine over TiO(2)/CNTs prepared by hydrothermal method was about 30% and 20% higher than that of titania P25 and anatase prepared hydrothermally in given time. The TiO(2)/CNTs composite samples were characterized by TGA-DSC, TEM, UV-vis DRS, XRD and BET, to explain the reason for efficient degradation and adsorption process of atrazine. Microwave thermal effect in this process was also investigated. Intermediates of degradation both in MAPC process and microwave-assisted photodegradation (MAPD) process were identified by LC/MS. It suggests that MWCNTs have special effects on atrazine degradation during MAPC process, like strong microwave absorption capability.     

CO2 adsorption by activated templated carbons

Highly porous carbons have been prepared by the chemical activation of two mesoporous carbons obtained by using hexagonal- (SBA-15) and cubic (KIT-6)-ordered mesostructured silica as hard templates. These materials were investigated as sorbents for CO(2) capture. The activation process was carried out with KOH at different temperatures in the 600-800°C range. Textural characterization of these activated carbons shows that they have a dual porosity made up of mesopores derived from the templated carbons and micropores generated during the chemical activation step. As a result of the activation process, there is an increase in the surface area and pore volume from 1020 m(2)g(-1) and 0.91 cm(3)g(-1) for the CMK-8 carbon to a maximum of 2660 m(2)g(-1) and 1.38 cm(3)g(-1) for a sample activated at 800°C (KOH/CMK-8 mass ratio of 4). Irrespective of the type of templated carbon used as precursor or the operational conditions used for the synthesis, the activated samples exhibit similar CO(2) uptake capacities, of around 3.2 mmol CO(2)g(-1) at 25°C. The CO(2) capture capacity seems to depend on the presence of narrow micropores (<1 nm) rather than on the surface area or pore volume of activated carbons. Furthermore, it was found that these porous carbons exhibit a high CO(2) adsorption rate, a good selectivity for CO(2)-N(2) separation and they can be easily regenerated.