Grafting poly(ethylene glycol) monomethacrylate onto Fe3O4 nanoparticles to resist nonspecific protein adsorption

Magnetic nanoparticles grafted with poly(poly(ethylene glycol) monomethacrylate) (P(PEGMA)) were prepared by reversible addition-fragmentation chain transfer (RAFT) polymerization. In this approach, S-benzyl S′-trimethoxysilylpropyltrithiocarbonate, used as a chain transfer agent for RAFT, was first immobilized onto the magnetic nanoparticle surface, and then PEGMA was grafted onto the surface of magnetic nanoparticle via RAFT polymerization. The results showed that P(PEGMA) chains grew from magnetic nanoparticles by surface-induced RAFT polymerization. The grafted P(PEGMA) chains can decrease the nonspecific adsorption of proteins on the surface of Fe₃O₄ nanoparticles.     

Fabrication of NIR‐Excitable SERS‐Active Composite Particles Composed of Densely Packed Au Nanoparticles on Polymer Microparticles

A simple fabrication method is demonstrated for surface‐enhanced Raman scattering (SERS)‐active plasmonic nanoballs, which consisted of Au nanoparticles (NPs) and core–shell polystyrene and amino‐terminated poly(butadiene) particles, by heterocoagulation and Au NP diffusion. The amount of Au NPs introduced into the core–shell particles increases with the concentration of Au NPs added to the aqueous dispersion of the core–shell particles. When the amount of Au NPs increases, closely packed, three‐dimensionally arranged and close‐packed Au NPs arrays are formed in the shells. Strong SERS signals from para‐mercaptophenol adsorbed onto composite particles with multilayered Au NPs arrays are obtained by near‐infrared (NIR) light illumination.     

Imaging the Hydrated Microbe‐Metal Interface Using Nanoscale Spectrum Imaging

PdAu nanocrystals are synthesised by Geobacter sulfurreducens, a dissimilatory metal‐reducing bacterium, and the resulting bimetallic nanocrystal‐decorated microbes are imaged using a range of advanced electron microscopy techniques. Specifically, the first example of elemental mapping of fully hydrated biological nanostructures using scanning transmission electron microscope (STEM) energy dispersive X‐ray (EDX) spectrum imaging within an environmental liquid‐cell is reported. These results are combined with cryo‐TEM and ex situ STEM imaging and EDX analysis with the aim of better understanding microbial synthesis of bimetallic nanoparticles. It is demonstrated that although Au and Pd are colocalized across the cells, the population of nanoparticles produced is bimodal, containing ultrasmall alloyed nanocrystals with diameters <3 nm and significantly larger core‐shell structures (>200 nm in diameter) which show higher Pd contents and exhibit a Pd enriched shell only a few nanometers thick. The application of high‐resolution imaging techniques described here offers the potential to visualize the microbe‐metal interface during the bioproduction of a range of functional materials by microbial “green” synthesis routes, and also key interfaces underpinning globally relevant environmental processes (e.g., metal cycling).     

Highly Enhanced Emission of Visible Light from Core–Dual‐Shell‐Type Hybridized Nanoparticles

Core–dual‐shell‐type hybridized nanoparticles (NPs) having Au‐core/dye‐doped silica inner shell/Au outer shell are successfully fabricated by developing a biphasic process that is a kind of so‐called “one‐pot” method. The resulting hybridized NPs exhibit evidently about 20‐fold enhancement of fluorescence intensity, increase in fluorescence quantum yield, and decrease in fluorescence lifetime. These effects depend on the metal nanostructure being optimized, compared with the reference hybridized NPs with neither a Au‐core nor a Au outer shell, due to the gap‐mode effect induced by localized surface plasmon resonance in the core–dual‐shell‐type MIM‐like nanostructure. More detailed elucidation concerning the enhancement mechanism will provide the possibility of photonic device application, for example as a high‐performance point light source, nanolaser, or sensor for bioimaging in the visible region in the near future.     

Amphiphilic Core–Shell Nanocomposite Particles for Enhanced Magnetic Resonance Imaging

A scalable synthesis of magnetic core–shell nanocomposite particles, acting as a novel class of magnetic resonance (MR) contrast agents, has been developed. Each nanocomposite particle consists of a biocompatible chitosan shell and a poly(methyl methacrylate) (PMMA) core where multiple aggregated γ‐Fe₂O₃ nanoparticles are confined within the hydrophobic core. Properties of the nanocomposite particles including their chemical structure, particle size, size distribution, and morphology, as well as crystallinity of the magnetic nanoparticles and magnetic properties were systematically characterized. Their potential application as an MR contrast agent has been evaluated. Results show that the nanocomposite particles have good stability in biological media and very low cytotoxicity in both L929 mouse fibroblasts (normal cells) and HeLa cells (cervical cancer cells). They also exhibited excellent MR imaging performance with a T₂ relaxivity of up to 364 mM_Fe^?1 s^?1. An in vivo MR test performed on a naked mouse bearing breast tumor indicates that the nanocomposite particles can localize in both normal liver and tumor tissues. These results suggest that the magnetic core–shell nanocomposite particles are an efficient, inexpensive and safe T₂‐weighted MR contrast agent for both liver and tumor MR imaging in cancer therapy.     

Synthesis and conformational characterization of functional di-block copolymer brushes for microarray technology

Surface initiated polymerization (SIP) coupled with reversible addition-fragmentation chain transfer polymerization (RAFT) was used to functionalize microarray glass slides with block polymer brushes. N,N-dimethylacrylamide (DMA) and N-acryloyloxysuccinimide (NAS) (graft-poly[DMA-b-(DMA-co-NAS)]) brushes, with di-block architecture, were prepared from a novel RAFT chain transfer agent bearing a silanating moiety (RAFT silane) directly anchored onto the glass surfaces. Conformational characterization of the coatings was performed by Self Spectral Interference Fluorescence Microscopy (SSFM), an innovative technique that describes the location of a fluorescent DNA molecule relative to a surface with sub-nanometer accuracy. X-ray Photoelectron Spectroscopy (XPS) and Scanning Electron Microscopy (SEM) were used to characterize the coatings composition and morphology.     

Green synthesis and characterization of Au@Pt core–shell bimetallic nanoparticles using gallic acid

In this study, we developed a facile and benign green synthesis approach for the successful fabrication of well-dispersed urchin-like Au@Pt core–shell nanoparticles (NPs) using gallic acid (GA) as both a reducing and protecting agent. The proposed one-step synthesis exploits the differences in the reduction potentials of AuCl₄⁻ and PtCl₆²⁻, where the AuCl₄⁻ ions are preferentially reduced to Au cores and the PtCl₆²⁻ ions are then deposited continuously onto the Au core surface as a Pt shell. The as-prepared Au@Pt NPs were characterized by transmission electron microscope (TEM); high-resolution transmission electron microscope (HR-TEM); scanning electron microscope (SEM); UV-vis absorption spectra (UV-vis); X-ray diffraction (XRD); Fourier transmission infrared spectra (FT-IR). We systematically investigated the effects of some experimental parameters on the formation of the Au@Pt NPs, i.e., the reaction temperature, the molar ratios of HAuCl₄/H₂PtCl₆, and the amount of GA. When polyvinylpyrrolidone K-30 (PVP) was used as a protecting agent, the Au@Pt core–shell NPs obtained using this green synthesis method were better dispersed and smaller in size. The as-prepared Au@Pt NPs exhibited better catalytic activity in the reaction where NaBH₄ reduced p-nitrophenol to p-aminophenol. However, the results showed that the Au@Pt bimetallic NPs had a lower catalytic activity than the pure Au NPs obtained by the same method, which confirmed the formation of Au@Pt core–shell nanostructures because the active sites on the surfaces of the Au NPs were covered with a Pt shell.     

Insight into growth of Au–Pt bimetallic nanoparticles: an in situ XAS study

Au–Pt bimetallic nanoparticles have been synthesized through a one‐pot synthesis route from their respective chloride precursors using block copolymer as a stabilizer. Growth of the nanoparticles has been studied by simultaneous in situ measurement of X‐ray absorption spectroscopy (XAS) and UV–Vis spectroscopy at the energy‐dispersive EXAFS beamline (BL‐08) at Indus‐2 SRS at RRCAT, Indore, India. In situ XAS spectra, comprising both X‐ray near‐edge structure (XANES) and extended X‐ray absorption fine‐structure (EXAFS) parts, have been measured simultaneously at the Au and Pt L₃‐edges. While the XANES spectra of the precursors provide real‐time information on the reduction process, the EXAFS spectra reveal the structure of the clusters formed in the intermediate stages of growth. This insight into the formation process throws light on how the difference in the reduction potential of the two precursors could be used to obtain the core–shell‐type configuration of a bimetallic alloy in a one‐pot synthesis method. The core–shell‐type structure of the nanoparticles has also been confirmed by ex situ energy‐dispersive spectroscopy line‐scan and X‐ray photoelectron spectroscopy measurements with in situ ion etching on fully formed nanoparticles.     

Polymerizable Ligands as Stabilizers for Nanoparticles

Monomers bearing functional groups that can get chemisorbed on nanoparticles to form polymerizable monolayers have emerged as an interesting class of stabilizer ligands for various nanoparticles. High‐surface coverage, their ability to modify the properties of underlying nanoparticles, capability to form polymers of different molecular weights and possibility to make structural modifications make them attractive for their use as stabilizer ligands for nanoparticles. Both in situ and post‐synthesis grafting methods for attaching polymerizable ligands to nanoparticles are frequently used. The advantage of grafting polymerizable stabilizer on the surface of nanoparticles is that initially the polymerizable molecule acts as a proper stabilizer for the nanoparticles and later their surface polymerization or co‐polymerization with another suitable monomer can be carried out to generate the desired polymer scaffold around the nanoparticles, which ensures the increased stability of the resulting core‐polymerized shell nanoparticles. This review discusses interesting reports from recent literature on grafting of polymerizable ligands and their polymerization on gold, silver, silica, and iron oxide nanoparticles.     

Ultrasound-promoted direct functionalization of multi-walled carbon nanotubes in water via Diels-Alder “click chemistry”

A facile and environmentally friendly strategy for grafting polymers onto the surface of multi-walled carbon nanotubes (CNTs) was demonstrated by Diels-Alder “click chemistry”. Firstly, the copolymers of poly(styrene-alt-maleic anhydride) (PSM) were prepared by the reversible addition-fragmentation chain transfer (RAFT) polymerization and subsequently functionalized with furfuryl amine to introduce anchoring groups. The copolymers were then grafted on CNTs via the Diels-Alder reaction in water through a conventional heating-stirring route and ultrasound-assisted method. The obtained nanocomposite materials were characterized by thermogravimetric analysis, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, Raman spectroscopy and transmission electron microscopy. The results indicated that the reaction rate under ultrasound irradiation was accelerated about 12 times than the one under the conventional heating-stirring condition without losing the grafting efficiency. The direct functionalization of CNTs formed a stably dispersed solution in water, promising a green and effective method for industrial process.     

Preparation of Gold/triblock Copolymer Composite Nanoparticles

A kind of novel gold (Au)/hydroxylated poly (styrene-b-butadiene-b-styrene) triblock copolymer (HO-SBS) composite nanoparticles was synthesized by reduction of tetrachloroaurate ions in HO-SBS micelle. The Au–HO-SBS composite nanoparticles are composed by gold core about 35 nm in diameter and polymer shell about 7 nm in thickness. Formation of the Au/HO-SBS nanoparticles is indentified by infrared (IR) and UV-visible absorption spectroscopies. Transmission electron microscopy (TEM) result shows that the composite nanoparticles tend to aggregate into an ordered hexagonal array on carbon-coated grid.     

Formation of multifunctional Fe_3O_4/Au composite nanoparticles for dual-mode MR/CT imaging applications

Recent advances with iron oxide/gold(Fe3O4/Au) composite nanoparticles(CNPs) in dual-modality magnetic resonance(MR) and computed tomography(CT) imaging applications are reviewed. The synthesis and assembly of "dumbbelllike" and "core/shell" Fe3O4/Au CNPs is introduced. Potential applications of some developed Fe3O4/Au CNPs as contrast agents for dual-mode MR/CT imaging applications are described in detail.     

Pd/Au纳米结构制备和粒子组分自旋的谱学性能研究

为研究Pd/Au纳米结构制备和电催化性能、控制粒子大小组分和自旋,用油浴热分解方法制备了核/壳纳米结构Pd/Au双金属合金纳米颗粒,采用PVP和多元醇作表面活性剂和稳定剂,依据溶液浓度、颗粒大小、吸附能控制晶相获得了均匀、一致的2层和3层Pd/Au纳米样品,并采用HAADF和HRTEM测试了纳米结构尺寸形貌,用EDS测试了成分分布,试验产物用TEM/XRD进行了表征,结果表明,Pd/Au具有面心立方八面体结构,与Au/Pd核壳不同,纳米Pd/Au具有活性、耐久性、电催化性和稳定性。     

RAFT “grafting-through” approach to surface-anchored polymers: Electrodeposition of an electroactive methacrylate monomer

The synthesis of homopolymer and diblock copolymers on surfaces was demonstrated using electrodeposition of a methacrylate-functionalized carbazole dendron and subsequent reversible addition-fragmentation chain transfer (RAFT) “grafting-through” polymerization. First, the anodically electroactive carbazole dendron with methacrylate moiety (G1CzMA) was electrodeposited over a conducting surface (i.e. gold or indium tin oxide (ITO)) using cyclic voltammetry (CV). The electrodeposition process formed a crosslinked layer of carbazole units bearing exposed methacrylate moieties. This film was then used as the surface for RAFT polymerization process of methyl methacrylate (MMA), styrene (S), and tert-butyl acrylate (TBA) in the presence of a free RAFT agent and a free radical initiator, resulting in grafted polymer chains. The molecular weights and the polydispersity indices (PDI) of the sacrificial polymers were determined by gel permeation chromatography (GPC). The stages of surface modification were investigated using X-ray photoelectron spectroscopy (XPS), ellipsometry, and atomic force microscopy (AFM) to confirm the surface composition, thickness, and film morphology, respectively. UV-Vis spectroscopy also confirmed the formation of an electro-optically active crosslinked carbazole film with a p \pi - p^* \pi^{{\ast}}_{} absorption band from 450-650nm. Static water contact angle measurements confirmed the changes in surface energy of the ultrathin films with each modification step. The controlled polymer growth from the conducting polymer-modified surface suggests the viability of combining electrodeposition and grafting-through approach to form functional polymer ultrathin films.     

Hybridization of surface-modified metal nanoparticles and a resin

Mercapto-terminated linear polymers, which were prepared by a reversible addition-fragmentation chain transfer (RAFT) technique, were used to modify metal nanoparticle surfaces. Au and Ag nanoparticles which are approximately 3–6 nm were used. This modification resulted in easy dispersion of the nanoparticles in polymer resins by simple mixing. The quality of the dispersion was confirmed by UV–Vis spectroscopy and transmission electron microscopy.     

Preparation of Halloysite Nanotubes/Polystyrene (HNTs/PS) Core‐shell Particles via Soap‐less Microemulsion Polymerization

Halloysite nanotubes/polystyrene (HNTs/PS) inorganic/organic core‐shell particles were prepared via a convenient soap‐less microemulsion polymerization. The inorganic cores were pre‐treated with allyl alcohol (AA) and the polymer shells were prepared successfully by the facile soap‐less microemulsion polymerization of styrene (St) with the allyl alcohol‐modified halloysite nanotube (AA‐HNT) nanoparticles as seeds, and potassium persulfate (KPS) as initiator in water. The products were characterized by Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). The morphologies of the HNTs/PS core‐shell particles were characterized by transmission electron microscopy (TEM). The mechanism of the nucleation is also mentioned.     

Preparation of Polypropylene/Glycidyl Methacrylate Modified n-TiO2-PMMA Composites via the RAFT Process: Grafting “Through” Surface-Modified Nanoparticles

Glycidyl methacrylate (GMA), a functionalized agent that can chemically link to TiO₂ nanomaterial (n-TiO₂), was used to modify the surface of n-TiO₂ via a Ti-ethereal bond, yielding a GMA-modified n-TiO₂ (mn-TiO₂). Then the GMA bonded to the TiO₂ surface was copolymerized with methyl methacrylate (MMA) via a reversible addition-fragmentation chain transfer (RAFT) polymerization in the presence of the RAFT agent S-1-dodecyl-S′-(α, α′- dimethyl -α″-acetic acid)trithiocarbonate (DDACT) to form mn-TiO₂-PMMA nanoparticles. The resulting mn-TiO₂ nanoparticles and mn-TiO₂-PMMA nanoparticle materials were characterized by using infrared spectroscopy (IR), thermal analysis, and electron microscopy. The mn-TiO₂ nanoparticles demonstrated good dispersive capacity in organic solvents. The results of TGA indicated that the amount of PMMA grafted onto the surface of TiO₂ increased with the polymerization time. Additonally, the effects of mn-TiO₂/PMMA on the thermal and mechanical properties of polypropylene were studied.     

An insight into the effect of composition for enhance catalytic performance of biogenic Au/Ag bimetallic nanoparticles

A comprehensive knowledge of composition‐activity property relationship of nanoparticulate materials is highly desirable for applications in various catalysis reactions. We have addressed a facile green aqueous approach for preparation of Au, Ag monometallic, Au/Ag alloy as well as core‐shell bimetallic nanoparticles. The phytochemicals present in lemon grass leaves extract were employed both as natural reducing and capping agents at room temperature. X‐ray diffraction pattern, UV‐Vis spectroscopy, and energy dispersive X‐ray studies confirmed the formation of bimetallic system. The ensuing Au core/Ag shell and Au/Ag alloy bimetallic nanoparticles were crystalline and spherical in nature with identical average diameter of ~ 18 nm as measured via transmission electron microscopy. The bimetallic systems incredibly display higher catalytic potential than their monometallic counterparts which were vividly reckoned on structural effect, lattice compression, and synergistic electronic effect.     

Assembly of Gold Nanoparticles on Gold Nanorods Using Functionalized Poly(N‐isopropylacrylamide) as Polymeric “Glue”

A telechelic thermoresponsive polymer, α‐amino‐ω‐thiol‐poly(N‐isopropylacrylamide) (H₂N‐PNiPAM‐SH), is used as the polymeric glue to assemble gold nanoparticles (AuNPs) around gold nanorods (AuNRs) into a satellite structure. Prepared by reversible addition‐fragmentation chain transfer polymerization followed by hydrazinolysis, H₂N‐PNiPAM‐SH is able to interlink the two types of the gold building blocks with the thiol‐end grafting on AuNRs and the amine‐end coordinating on the AuNP surface. The density of the grafted AuNPs on AuNRs can be tuned by adjusting the molar ratio between AuNPs and AuNRs in the feed. The resulted satellite‐like assembly exhibits unique optical property that was responsive to temperature change.     

Individual SERS substrate with core–satellite structure decorated in shrinkable hydrogel template for pesticide detection

Individual Au@PNIPAM/Ag composite has been designed and fabricated as surface‐enhanced Raman scattering (SERS) substrate in this paper. Because of the high porosity of the polymer shell and the driving force of the Au core to Ag⁺(H₂O)_n (n = 1–4) in aqueous solution, chemical reactions can be carried out while aggregation is completely avoided. Also, this makes the formation of vast and monodisperse Ag nanoparticles within PNIPAM and increases the colloidal stability. The Au cores with different sizes and the vast Ag nanoparticles then form core–satellite structures that can generate plasmon resonance. Moreover, this kind of individual Au@PNIPAM/Ag composite can be seen directly through Raman optical microscope, and uncertain effects on SERS signals resulting from variability of the configurations are minimized because these individual composite particles are relatively uniform. Importantly, the gaps between the Au and Ag nanoparticles can decrease because the PNIPAM shrinks from swollen to collapse state, so the substrate can also be used for inspecting pesticide residues accurately and rapidly. Copyright © 2014 John Wiley & Sons, Ltd.