Dextran‐Coated Antiferromagnetic MnO Nanoparticles for a T1‐MRI Contrast Agent with High Colloidal Stability

A simple approach to synthesize carboxymethyl dextran‐coated MnO nanoparticles (CMDex‐MnONPs) with high colloidal stability in physiological saline solutions is described here for potential applications as a magnetic resonance imaging (MRI) T₁ contrast agent. The thermal decomposition methodology is used to produce uniform MnONPs with an average size of around 20 nm, and its hydrophobic surface is modified with CMDex molecules, conferring hydrophilic properties. After CMDex coating, the nanoparticle presents high colloidal stability in concentrations ranging from 10 to 50 μg mL^?1, average hydrodynamic size (Z‐average) of 130 nm, polydispersity degree of ≈12%, and negative surface charge in both simulated body fluid solutions and pure water with zeta‐potential of –20 and –40 mV, respectively. The CMDex‐MnONPs with 20 nm show antiferromagnetic behavior at room temperature, and the magnetic properties are found to be strongly dependent of the nanoparticle size, increasing the contribution of the ferromagnetic Mn₃O₄ phase with decreasing size for nanoparticles about 3 nm. Cytotoxicity evaluation in cancerous and noncancerous cells in the range of 5.0–50.0 μg mL^?1 shows low toxicity for cancerous cells and lack of the same for healthy cells lines. Related to the magnetic properties, CMDex‐MnONP presents significant r₁ relaxivity and low r₂/r₁ relaxivity ratio. The results suggest that these nanoparticles display characteristics for potential applications as an MRI T₁ contrast agent.     

High Rate and Long Cycle Life of a CNT/rGO/Si Nanoparticle Composite Anode for Lithium‐Ion Batteries

Si nanoparticle (Si‐NP) composite anode with high rate and long cycle life is an attractive anode material for lithium‐ion battery (LIB) in hybrid electric vehicle (HEV)/pure electric vehicle (PEV). In this work, a carbon nanotube (CNT)/reduced graphene oxide (rGO)/Si nanoparticle composite with alternated structure as Li‐ion battery anode is prepared. In this structure, rGO completely wraps the entire Si/CNT networks by different layers and CNT networks provide fast electron transport pathways with reduced solid‐state diffusion, so that the stable solid‐electrolyte interphase layer can form on the whole surface of the matrix instead of on single Si nanoparticle, which ensure the high cycle stability to achieve the excellent cycle performance. As a result, the CNT/rGO/Si‐NP anode exhibits high performances with long cycle life (≈455 mAh g^?1 at 15 A g^?1 after 2000 cycles), high specific charge capacity (≈2250 mAh g^?1 at 0.2 A g^?1, ≈650 mAh g^?1 at 15 A g^?1), and fast charge/discharge rates (up to 16 A g^?1). This nanostructure anode with facile and low‐cost synthesis method, as well as excellent electrochemical performances, makes it attractive for the long life cycles at high rate of the next generation LIB applications in HEV/PEV.     

Gold Nanocages as Effective Photothermal Transducers in Killing Highly Tumorigenic Cancer Cells

Numerous gold nanostructures have the potential for photothermal therapy in cancers. Here, gold nanocages and gold nanoshells are synthesized, the sizes of which are fine‐tuned for a response at 750 nm wavelength. Their photothermal therapeutic efficiency is compared at gold concentration of 100 lg mL^?1 using a near‐infrared laser (750 nm). The biocompatibility for varying concentrations of gold (1 to 100 lg mL^?1) is performed in a normal cell line and laser‐mediated cell cytotoxicity for varying time intervals (7.5 and 10 min) is carried out in breast cancer cells. This study shows that when analyzed under similar conditions, the gold nanocages show better biocompatibility and are more efficient in near‐infrared absorption and photothermal conversion in comparison with conventional gold nanoshells. When subjected to photothermal laser ablation of breast cancer cell line for 7.5 min and 10 min, the nanocages are able to induce 62.92 ± 3.25% and 96.41 ± 3.04% reduction in cell viability, respectively, in comparison to nanoshells, in which a 43.35 ± 1.91% and 79.89 ± 4.74% reduction in cell viability is observed. The current study shows that the gold nanocages can outperform gold nanoshells and effectively kill cancer cells without any significant cytotoxic effect on normal cells.     

Self‐Assemble Polymeric Nanoparticle with GSH Exhaustion for SPECT Imaging–Guided Enhanced Radioisotope Therapy

Exploiting biocompatible nanomaterials for cancer theranostics has attracted great attention in recent years. Herein, a multifunctional self‐assembled nanoparticle based on a biocompatible polymer that contains 3‐(4‐hydroxyphenyl) propionic acid N‐hydroxysuccinimide ester (HOPA) for radiolabeling and piperlongumine (PL) for exhausting endogenous glutathione (GSH) (HOPA‐C18PMH‐PEG/PL) is successfully synthesized. With radionuclide ¹²⁵I labeling, SPECT imaging shows high tumor uptake of HOPA‐C18PMH‐PEG/PL after intravenous injection. The in vitro and in vivo combined radioisotope therapy (RIT) and chemotherapy using ¹³¹I‐labeled HOPA‐C18PMH‐PEG/PL is then carried out, achieving synergistic antitumor effect. This is because the reactive oxygen species (ROS) level in the tumor sites of mice treated with ¹³¹I‐labeled HOPA‐C18PMH‐PEG/PL is increased after the exhaustion of GSH by PL. Additionally, such a strategy (exhausting GSH and increasing ROS) induces no obvious toxicity to normal tissue. Therefore, as‐made polymeric nanoparticles exhibit multifunctional properties for SPECT imaging–guided combined RIT and chemotherapy in one system. This finding will further promote polymeric nanoparticle–based RIT of cancer and is expected to be used for future clinical transformation.     

Hydroxyapatite Nanoparticles as a Novel Gene Carrier

Hydroxyapatite crystalline nanoparticles were created by a precipitation hydrothermal technique and the majority of crystal particles were in the size range of 40–60nm and exhibited a colloidal feature when suspended in water. The gastric cancer SGC-7901 cell line cells were cultivated in the presence of10–100 μg ml⁻¹ hydroxyapatite nanoparticle suspension and verified by MTT evaluation for their biocompatibility in vitro. The agarose gel electrophoresis analysis demonstrated that the HA nanoparticles potentially adsorb the green fluorescence protein EGFP-N1 plasmid DNA at pH 2 and 7, but not at pH 12. The DNA–nanoparticle complexes transfected EGFP-N1 pDNA into SGC-7901 cells in vitro with the efficiency about 80% as referenced with Lipofectmine TM 2000. In vivo animal experiment revealed no acute toxic adverse effect 2weeks after tail vein injection into mice, and TEM examination demonstrated their biodistribution and expression within the cytoplasm and also a little in the nuclei of the liver, kidney and brain tissue cells. These results suggest that the HA nanoparticle is a promising material that can be used as gene carrier, vectors.     

Janus Nanoparticle Emulsions as Chiral Nanoreactors for Enantiomerically Selective Ligand Exchange

Janus nanoparticles capped with a hydrophobic and hydrophilic hemisphere of mercapto ligands can self‐assemble into hollow, emulsion‐like nanostructures in controlled media. As the nanoparticle emulsions are chiroptically active exhibiting a plasmonic circular dichroism absorption in the visible range, they can be exploited as a unique chiral nanoreactor by selective encapsulation of d ‐enantiomer into the water phase of the water‐in‐oil emulsions for directional functionalization of the nanoparticles and endow the resulting nanoparticles with select chirality. This is demonstrated in the present study with gold Janus nanoparticles functionalized with (hydrophobic) hexanethiolates and (hydrophilic) 3‐mercapto‐1,2‐propandiol, and d ,l ‐cysteine is used as the molecular probe. Experimental results demonstrate that d ‐cysteine is the preferred enantiomers entrapped within the nanoparticle emulsions, where the ensuing ligand exchange reaction is initially confined to the hydrophilic face of the Janus nanoparticles. This suggests that with a deliberate control of the reaction time, chiral Janus nanoparticles can be readily prepared by ligand exchange reactions even with a racemic mixture of ligands.     

Biodegradable Ultrasmall‐in‐Nano Gold Architectures: Mid‐Period In Vivo Distribution and Excretion Assessment

The persistence of metals in the body after the designed theranostic action has hampered the clinical translation of noble metal nanoparticles (NPs) to clinics. Therefore, the appealing behaviors of NPs for healthcare applications are still on the bench‐side. Here, quantitative evaluation in healthy murine models show that gold comprised in passion fruit‐like nanoarchitectures (NAs) are excreted daily over a 10 d period by both renal and biliary pathways after biodegradation to the building blocks. Furthermore, histological analyses confirm the absence of nephrotoxicity and the remarkable biocompatibility of NAs up to the higher tested amount of 150 mg kg^?1. These in vivo findings demonstrate that NAs are the first full‐inorganic disassembling nanoplatforms exhibiting a noticeable excretion rate from model organisms. Such results are a significant step in bringing noble metal nanotheranostics to the forefront of cancer treatments once again.     

Theoretical studies on structure and performance of [1,2,5]‐oxadiazolo‐[3,4‐d]‐pyridazine‐based derivatives

Based on energetic compound [1,2,5]‐oxadiazolo‐[3,4‐d]‐pyridazine, a series of functionalized derivatives were designed and first reported. Afterwards, the relationship between their structure and performance was systematically explored by density functional theory at B3LYP/6‐311 g (d, p) level. Results show that the bond dissociation energies of the weakest bond (N–O bond) vary from 157.530 to 189.411 kJ · mol^?1. The bond dissociation energies of these compounds are superior to that of HMX (N–NO_2, 154.905 kJ · mol^?1). In addition, H1, H2, H4, I2, I3, C1, C2, and D1 possess high density (1.818–1.997 g · cm^?3) and good detonation performance (detonation velocities, 8.29–9.46 km · s^?1; detonation pressures, 30.87–42.12 GPa), which may be potential explosives compared with RDX (8.81 km · s^?1, 34.47 GPa ) and HMX (9.19 km · s^?1, 38.45 GPa). Finally, allowing for the explosive performance and molecular stability, three compounds may be suggested as good potential candidates for high‐energy density materials. Copyright © 2016 John Wiley & Sons, Ltd.     

Ultrasensitive PbS‐Quantum‐Dot Photodetectors for Visible–Near‐Infrared Light Through Surface Atomic‐Ligand Exchange

A surface atomic‐ligand exchange method is applied the first time in the construction of photodetectors (PDs) based on PbS quantum dots (QDs) for ultrasensitivity. The device thus produces a high photosensitivity to visible and near‐infrared light with a photoresponsivity up to 7.5 × 10³ A W^?1 and a high stability in air. In particular, these PbS‐QD‐based PDs show the capability of following a pulse light with a frequency up to 100 kHz well at a relatively fast response time/recovery time of ≈4/40 μs, much faster than most previous QD‐based PDs. The short response time is attributed to modification for the surface of the PbS‐QDs by cetyltrimethylammonium bromide treatment, which effectively improves the contact between the QDs and the Au electrodes, leading to extracting a high carrier mobility (≈0.142 cm² V^?1 s^?1). These findings show the great potential of PbS‐QDs as high‐speed nano‐photodetectors, and, more importantly, demonstrate the importance of the surface atomic‐ligand exchange method in the construction of QD‐based devices.     

Facile Synthesis of Gd(OH)3‐Doped Fe3O4 Nanoparticles for Dual‐Mode T1‐ and T2‐Weighted Magnetic Resonance Imaging Applications

The facile hydrothermal synthesis of polyethyleneimine (PEI)‐coated iron oxide (Fe₃O₄) nanoparticles (NPs) doped with Gd(OH)₃ (Fe₃O₄‐Gd(OH)₃‐PEI NPs) for dual mode T₁‐ and T₂‐weighted magnetic resonance (MR) imaging applications is reported. In this approach, Fe₃O₄‐Gd(OH)₃‐PEI NPs are synthesized via a hydrothermal method in the presence of branched PEI and Gd(III) ions. The PEI coating onto the particle surfaces enables further modification of poly(ethylene glycol) (PEG) in order to render the particles with good water dispersibility and improved biocompatibility. The formed Fe₃O₄‐Gd(OH)₃‐PEI‐PEG NPs have a Gd/Fe molar ratio of 0.25:1 and a mean particle size of 14.4 nm and display a relatively high r₂ (151.37 × 10^?3m ^?1 s^?1) and r₁ (5.63 × 10^?3m ^?1 s^?1) relaxivity, affording their uses as a unique contrast agent for T₁‐ and T₂‐weighted MR imaging of rat livers after mesenteric vein injection of the particles and the mouse liver after intravenous injection of the particles, respectively. The developed Fe₃O₄‐Gd(OH)₃‐PEI‐PEG NPs may hold great promise to be used as a contrast agent for dual mode T₁‐ and T₂‐weighted self‐confirmation MR imaging of different biological systems.     

Interfacial ketene via the photo‐Wolff rearrangement for the modification of monolayer protected gold nanoparticles

An interfacial diazoketone‐modified gold nanoparticle (AuNP) was prepared and characterized by ¹H NMR and IR spectroscopy, TGA and TEM. Irradiation of the diazoketone leads to loss of nitrogen and the formation an interfacial ketene–AuNP via the photo‐Wolff rearrangement, evidenced by the loss of the characteristic C = N = N signal at 2068 cm^?1 in the IR spectrum and the growth of a new signal at 2100 cm^?1 indicative of the ketene. This ketene is relatively stable in the absence of added nucleophiles, but reacts quickly with oxygen nucleophiles illustrating the potential use of this ketene–AuNP as a template for a wide range of surface modifications. Copyright © 2013 John Wiley & Sons, Ltd.     

Controllable Formation of Niobium Nitride/Nitrogen‐Doped Graphene Nanocomposites as Anode Materials for Lithium‐Ion Capacitors

Niobium nitride/nitrogen‐doped graphene nanosheet hybrid materials are prepared by a simple hydrothermal method combined with ammonia annealing and their electrochemical performance is reported. It is found by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) that the as‐obtained niobium nitride nanoparticles are about 10–15 nm in size and homogeneously anchored on graphene. A non‐aqueous lithium‐ion capacitor is fabricated with an optimized mass loading of activated carbon cathode and the niobium nitride/nitrogen‐doped graphene nanosheet anode, which delivers high energy densities of 122.7–98.4 W h kg^?1 at power densities of 100–2000 W kg^?1, respectively. The capacity retention is 81.7% after 1000 cycles at a current density of 500 mA g^?1. The high energy and power of this hybrid capacitor bridges the gap between conventional high specific energy lithium‐ion batteries and high specific power electrochemical capacitors, which holds great potential applications in energy storage for hybrid electric vehicles.     

Hydrothermal Preparation of Photoluminescent Graphene Quantum Dots Characterized Excitation‐Independent Emission and its Application as a Bioimaging Reagent

Zero‐dimensional photoluminescent (PL) graphene quantum dots (GQDs) that can be used as the cell‐imaging reagent are prepared by a hydrothermal route using the graphene oxide (GO) as the carbon source. Under the optimized hydrothermal conditions, an initial hydrogen peroxide concentration of 0.5 mg mL^?1 at 180 °C for 120 min, the GO sheets can be cut into nanocrystals with lateral dimensions in the range of 1.5–5.5 nm and an average thickness of around 1.1 nm. The as‐prepared GQDs exhibit an abundance of hydrophilic hydroxy and carboxyl groups and emit bright blue luminescence with up‐conversion properties in a water solution at neutral pH. Most interestingly, they indicate excitation‐independent emission characteristics, and the surface state is demonstrated to have a key role in the PL properties. The fluorescence quantum yield of the GQDs is tested to be around 6.99% using quinine sulfate as a standard. In addition, the as‐prepared GQDs can enter into HeLa cells easily as a fluorescent imaging reagent without any further functionalization, indicating they are aqueous stability, biocompatibility, and promising for potential applications in biolabeling and solution state optoelectronics.     

Structure Dependence of Fe‐Co Hydroxides on Fe/Co Ratio and Their Application for Supercapacitors

Fe‐Co hydroxides with different Fe/Co atomic ratios grown on nickel foams are synthesized by one‐step electrochemical deposition. The prepared samples are characterized by X‐ray diffraction, X‐ray photoelectron spectroscopy, scanning electron microscopy, and transmission electron microscopy. It was found that the influence of initial Fe/Co ratios in the precursor solutions on the structure and electrochemical performance of electrodeposited products is significant. Fe(OH)₃ shows particle shape with average diameter of 200 nm. With addition of Co ions, frame‐like structure consisting of smaller particles is formed for Fe‐Co hydroxides. Based on the morphology of Co(OH)₂, it is deduced that Co(OH)₂ serves as a network former constructing a tridimensional frame network structure. Fe‐Co hydroxide with Fe/Co ratio of 1:1 exhibits two types of structure features: nanoflake‐like network structure overall and nanoparticle structure with numerous mesoporous microscopically. As the supercapacitor electrode materials, the as‐prepared Fe‐Co hydroxide electrode with Fe/Co ratio of 1:1 exhibits highest specific capacitance of 2255.6 F g^?1 at the current density of 1 A g^?1 and also shows good cycling performance of 73.5% capacity retention at current density of 10 A g^?1 after 2000 cycles. This work provides a facile method to produce promising Fe‐Co hydroxide electrode materials with high performance for supercapacitors.     

Nanoparticles Engineering for Lithium‐Ion Batteries

Lithium‐ion batteries (LIBs) have been extensively investigated due to the ever‐increasing demand for new electrode materials for electric vehicles (EVs) and clean energy storage. A wide variety of nano/microstructured LIBs electrode materials are hitherto created via self‐assembly, ranging from 0D nanospheres; 1D nanorods, nanowires, or nanobelts; and 2D nanofilms to 3D nanorod array films. Nanoparticles can be utilized to build up integrated architectures. Understanding of nanoparticles’ self‐assembly may provide information about their organization into large aggregates through low‐cost, high‐efficiency, and large‐scale synthesis. Here, the focus is on the recent advances in preparing hierarchically nano/microstructured electrode materials via self‐assembly. The hierarchical electrode materials are assembled from single component, binary to multicomponent building blocks via different driving forces including diverse chemical bonds and non‐covalent interactions. It is expected that nanoparticle engineering by high‐efficient self‐assembly process will impact the development of high‐performance electrode materials and high‐performance LIBs or other rechargeable batteries.     

Electrospinning Synthesis of Porous NiCoO2 Nanofibers as High‐Performance Anode for Lithium‐Ion Batteries

Nanostructured ternary/mixed transition metal oxides have attracted considerable attentions because of their high‐capacity and high‐rate capability in the electrochemical energy storage applications, but facile large‐scale fabrication with desired nanostructures still remains a great challenge. To overcome this, a facile synthesis of porous NiCoO₂ nanofibers composed of interconnected nanoparticles via an electrospinning–annealing strategy is reported herein. When examined as anode materials for lithium‐ion batteries, the as‐prepared porous NiCoO₂ nanofibers demonstrate superior lithium storage properties, delivering a high discharge capacity of 945 mA h g^?1 after 140 cycles at 100 mA g^?1 and a high rate capacity of 523 mA h g^?1 at 2000 mA g^?1. This excellent electrochemical performance could be ascribed to the novel hierarchical nanoparticle‐nanofiber assembly structure, which can not only buffer the volumetric changes upon lithiation/delithiation processes but also provide enlarged surface sites for lithium storage and facilitate the charge/electrolyte diffusion. Notably, a facile synthetic strategy for fabrication of ternary/mixed metal oxides with 1D nanostructures, which is promising for energy‐related applications, is provided.     

Liquid Crystalline Dispersions of Graphene‐Oxide‐Based Hybrids: A Practical Approach towards the Next Generation of 3D Isotropic Architectures for Energy Storage Applications

We report the use of the spray pyrolysis method to design self‐assembled isotropic ternary architectures made up of reduced graphene oxide (GO), functionalized multiwalled carbon nanotubes, and nickel oxide nanoparticles for cost‐effective high‐performance supercapacitor devices. Electrodes fabricated from this novel ternary system exhibit exceptionally high capacitance (2074 Fg^?1) due to the highly conductive network, synergistic link between GO and carbon nanotubes and achieving high surface area monodispersed NiO decorated rGO/CNTs composite employing the liquid crystallinity of GO dispersions. To further assess the practicality of this material for supercapacitor manufacture, we assembled an asymmetric supercapacitor device incorporating activated carbon as the anode. The asymmetric supercapacitor device showed remarkable capacity retention (>96%), high energy density (23 Wh kg^?1), and a coulombic efficiency of 99.5%.     

Three‐Dimensional Multilayer Assemblies of MoS2/Reduced Graphene Oxide for High‐Performance Lithium Ion Batteries

Three‐dimensional (3D) multilayer molybdenum disulfide (MoS₂)/reduced graphene oxide (RGO) nanocomposites are prepared by a solution‐processed self‐assembly based on the interaction using different sizes of MoS₂ and GO nanosheets followed by in situ chemical reduction. 3D multilayer assemblies with MoS₂ wrapped by large RGO nanosheets and good interface are observed by transmission electron microscopy. The interaction of Na⁺ ions with oxygen‐containing groups of GO is also investigated. The measurement of lithium ion batteries (LIBs) shows that MoS₂/RGO anode nanocomposite with a weight ratio of MoS₂ to GO of 3:1 exhibits an excellent rate performance of 750 mAh g^?1 at 3 A g^?1 outperforming many previous studies and a high reversible capacity up to ≈1180 mAh g^?1 after 80 cycles at 100 mA g^?1. Good rate performance and high capacity of MoS₂/RGO with 3D unique layered‐structures are attributed to the combined effects of continuous conductive networks of RGO, good interface facilitating charge transfer, and strong RGO sheets preventing the volume expansion. Results indicate that 3D multilayer MoS₂/RGO prepared by a facile solution‐processed assembly can be developed to be an excellent nanoarchitecture for high‐performance LIBs.     

Self‐Supporting AuCu@Cu Elongated Pentagonal Bipyramids Toward Neutral Glucose Sensing

Controlling the electronic structure of a catalyst has become an important approach to tune and optimize its antipoisoning ability and catalytic efficiency for a chemical reaction. Using d ‐mannitol as a structure‐directing agent to induce size transformation and twinned defects in copper particles, penta‐twinned Cu elongated pentagonal bipyramids as supports have been synthesized, and HAuCl₄ is reduced in situ to form an AuCu alloy on the surface of Cu, generating a self‐supporting AuCu@Cu core–shell structure for application as a glucose sensor in a neutral medium. The AuCu@Cu elongated pentagonal bipyramids with 0.42 at% Au show activities comparable with the Au and Pt catalyst but are more tolerant toward Cl^? than Au and more tolerant toward H_3–xPO₄^x? than Cu. The mass activity of AuCu@Cu reaches 0.10 A mg^?1 of Au at 0.6 V versus Ag/AgCl (3 m KCl) in a pH 8.0 buffer. The self‐supporting AuCu@Cu elongated pentagonal bipyramids are promising catalysts for glucose sensing in a neutral medium. This work offers an effective way to design antitoxic and durable catalysts with ultralow content of noble metal for glucose sensing.     

‘Self‐terminating radical cyclizations’ – new insight into the mechanism of the termination step from computational studies

Computational methods were used to gain detailed insight into the mechanism of self‐terminating radical cyclizations, which are initiated by intermolecular addition of O‐centred radicals XO^? to alkynes. The calculations were performed for the reaction of NO, SO, and AcO^? with cyclodecyne ( 1 ) and 5‐cyclodecynone ( 2 ), respectively. Whereas radical addition and the subsequent transannular radical translocation steps are energetically highly favourable processes for the various XO^?, the terminating homolytic β‐fragmentation of the O? X bond in the intermediate α‐oxy radicals 10 – 13 shows a strong dependence on the nature of X. Using simplified model systems, the fragmentation was explored in detail, which revealed that the rate of this step is primarily determined by the strength of the O? X bond and only to a minor extent by the ability of the X moiety to stabilize an unpaired electron in the transition state. However, the cleavage is exothermic, when the released radical X^? is resonance stabilized, e.g. NO, SO, and Bn^?, respectively. In those cases where the unimolecular β‐fragmentation of the O? X bond is slow, termination could also proceed through a bimolecular radical chain process involving the α‐oxy radical intermediate 10 – 13 and the precursor of XO^?, e.g. the Barton PTOC ester 18 or Kim's dithiocarbamate 20 , respectively. Alternative termination mechanisms via oxidation of 10 – 13 can be ruled out under the usual experimental conditions of self‐terminating radical cyclizations. Copyright © 2010 John Wiley & Sons, Ltd.