Amorphous Cobalt Coordination Nanolayers Incorporated with Silver Nanowires: A New Electrode Material for Supercapacitors

The 2D amorphous cobalt coordination framework/silver nanowires nanocomposites (A‐CoL/Ag NC) are successfully synthesized by one‐step solution agitation at room temperature. The experimental data reveal that the hybrid provides sufficient contact between active materials and electrolyte, and facilitates the transfer of ions/electrons, resulting in high specific capacitance, high output potential, great rate capacity at high current density, and good cycle stability. As supercapacitor electrode materials, the as‐prepared A‐CoL/Ag NC electrode exhibits a great specific capacitance which can reach up to 1467 mF cm^?2 at 1.0 mA cm^?2, and 1060 mF cm^?2 even at 10.0 mA cm^?2. The A‐CoL/Ag NC// activated carbon asymmetric supercapacitor (AC ASC) displays a maximum energy density (110 W h kg^?1 at 760 W kg^?1) and maximum power density (6410 W kg^?1 at 63 W h kg^?1) in 3.0 m KOH. Moreover, the developed solid‐state A‐CoL/Ag NC//AC ASC has a broad operated potential window within 0–1.6 V, long cycle life (95.2% after cycling 7000 cycles), delivering an energy density of 151 W h kg^?1 (at 790 W kg^?1), and a power density of 7972 W kg^?1 (at 70 W h kg^?1). The well‐synthesized nanocomposite provides a novel way to synthesize prominent electrode materials for supercapacitors.     

Flexible Ti‐Doped FeOOH Quantum Dots/Graphene/Bacterial Cellulose Anode for High‐Energy Asymmetric Supercapacitors

Ti‐doped FeOOH quantum dots (QD) decorated on graphene (GN) sheets are designed and fabricated by a facile and scalable synthesis route. Importantly, the Ti‐doped FeOOH QD/GN are successfully dispersed within bacterial cellulose (BC) substrate as bending anode with large loading mass for flexible supercapacitor. By virtue of its favorable architecture, this composite electrode exhibits a remarkable areal capacitance of 3322 mF cm^?2 at 2 mA cm^?2, outstanding cycle performance (94.7% capacitance retention after 6000 cycles), and excellent mechanical strength (68.7 MPa). To push the energy density of flexible supercapacitors, the optimized asymmetric supercapacitor using Mn₃O₄/GN/BC as positive electrode and Ti‐doped FeOOH QD/GN/BC as negative electrode can be cycled reversibly in the operating voltage range of 0–1.8 V and displays ultrahigh areal energy density of 0.541 mWh cm^?2, ultrahigh volumetric energy density of 9.02 mWh cm^?3, reasonable cycling performance (9.4% decay in specific capacitance after 5000 cycles), and good capacitive retention at bending state.     

Resin‐Derived Ni3S2/Carbon Nanocomposite for Advanced Rechargeable Aqueous Zn‐Based Batteries

The exploration of high‐energy and stable cathode materials is highly desirable and challenging for the development of advanced Zn‐based batteries. In this work, a facile pyrolysis method is reported to synthetize Ni₃S₂/carbon nanocomposite as high‐performance cathode by employing ion exchange resin as a precursor. Attributing to the abundant active sites and enhanced conductivity from well binding between Ni₃S₂ and carbon, a markedly high capacity of 234.3 mA h g^?1 is obtained for this Ni₃S₂/carbon at a high current density of 6.9 A g^?1. Moreover, a Zn‐based battery is demonstrated by using the Ni₃S₂/carbon as a cathode and Zn plate as an anode, which delivers a maximum power density of 58.6 kW kg^?1, together with a peak energy density of 356 W h kg^?1 and 93.7% capacity retention after 5000 charging–discharging cycles. This simple synthetic strategy to achieve robust Ni‐based composite electrodes may open up new opportunities to design other transition metal–based electrodes for energy storage applications.     

Hydrothermal Synthesis of Nickel Phosphate Nanorods for High‐Performance Flexible Asymmetric All‐Solid‐State Supercapacitors

Ni₂₀[(OH)₁₂(H₂O)₆][(HPO₄)₈(PO₄)₄]·12H₂O nanorods are successfully synthesized via a one‐pot hydrothermal reaction. A high‐performance flexible asymmetric all‐solid‐state supercapacitor based on the obtained Ni₂₀[(OH)₁₂(H₂O)₆][(HPO₄)₈(PO₄)₄]·12H₂O nanorods (positive electrode) and graphene nanosheets (negative electrode) is successfully assembled. It is the first report of this nanomaterial applied for all‐solid‐state supercapacitors. Interestingly, a maximum volumetric energy density of 0.446 mW h cm^?3 at a current density of 0.5 mA cm^?2 and a maximum power density of 44.1 mW cm^?3 at a current density of 6.0 mA cm^?2 are achieved by the as‐assembled device. What's more, the device also shows excellent mechanical flexibility and little capacitance change after over 5000 charge/discharge cycles at a current density of 0.5 mA cm^?2.     

Fabrication of Ni-Co binary oxide/reduced graphene oxide composite with high capacitance and cyclicity as efficient electrode for supercapacitors

Nickel-cobalt binary oxide/reduced graphene oxide (G-NCO) composite with high capacitance is synthesized via a mild method for electrochemical capacitors. G-NCO takes advantages of reduced graphene oxide (RGO) and nickel-cobalt binary oxide. As an appropriate matrix, RGO is beneficial to form homogeneous structure and improve the electron transport ability. The binary oxide owns more active sites than those of nickel oxide and cobalt oxide to promote the redox reaction. Attributed to the well crystallinity, homogeneous structure, increased active sites, and improved charge transfer property, the G-NCO composite exhibits highly enhanced electrochemical performance compared with G-NiO and G-Co₃O₄ composites. The specific capacitance of the G-NCO composite is about 1750 F g^?1 at 1 A g^?1 together with capacitance retention of 79 % (900/1138 F g^?1) over 10,000 cycles at 4 A g^?1. To research its practical application, an asymmetric supercapacitor with G-NCO as positive electrode and activated carbon as negative electrode was fabricated. The asymmetric device exhibits a prominent energy density of 37.7 Wh kg^?1 at a power density of 800 W kg^?1. The modified G-NCO composite shows great potential for high-capacity energy storage.     

Hierarchically Porous NaCoPO4–Co3O4 Hollow Microspheres for Flexible Asymmetric Solid‐State Supercapacitors

A template‐free hydrothermal method is developed to prepare hierarchical hollow precursors. An inside‐out Ostwald ripening mechanism is proposed to explain the formation of the hollow structure. After the calcination in the air, hierarchically meso/macroporous NaCoPO₄–Co₃O₄ hollow microspheres can easily be obtained. When being evaluated as electrode materials for a supercapacitor, the hierarchically porous NaCoPO₄–Co₃O₄ hollow microspheres electrode shows a specific capacitance of 268 F g^?1 at 0.8 A g^?1 and offers a good cycle life. More importantly, the obtained materials are successfully applied to fabricate flexible solid‐state asymmetric supercapacitors. The device exhibits a specific capacitance of 28.6 mF cm^?2 at 0.1 mA cm^?2, a good cycling stability with only 5.5% loss of capacitance after 5000 cycles, and good mechanical flexibility under different bending angles, which confirms that the hierarchically porous NaCoPO₄–Co₃O₄ hollow microspheres are promising active materials for the flexible supercapacitor.     

Tailoring MoS2 Ultrathin Sheets Anchored on Graphene Flexible Supports for Superstable Lithium‐Ion Battery Anodes

2D MoS₂ has a significant capacity decay due to the stack of layers during the charge/discharge process, which has seriously restricted its practical application in lithium‐ion batteries. Herein, a simple preform‐in situ process to fabricate vertically grown MoS₂ nanosheets with 8–12 layers anchored on reduced graphene oxide (rGO) flexible supports is presented. As an anode in MoS₂/rGO//Li half‐cell, the MoS₂/rGO electrode shows a high initial coulomb efficiency (84.1%) and excellent capacity retention (84.7% after 100 cycles) at a current density of 100 mA g^?1. Moreover, the MoS₂/rGO electrode keeps capacity as high as 786 mAh g^?1 after 1000 cycles with minimum degradation of 54 µAh g^?1 cycle^?1 after being further tested at a high current density of 1000 mA g^?1. When evaluated in a MoS₂/rGO//LiCoO₂ full‐cell, it delivers an initial charge capacity of 153 mAh g^?1 at a current density of 100 mA g^?1 and achieves an energy density of 208 Wh kg^?1 under the power density of 220 W kg^?1.     

Liquid‐Crystal‐Mediated Self‐Assembly of Porous α‐Fe2O3 Nanorods on PEDOT:PSS‐Functionalized Graphene as a Flexible Ternary Architecture for Capacitive Energy Storage

A novel aqueous‐based self‐assembly approach to a composite of iron oxide nanorods on conductive‐polymer (CP)‐functionalized, ultralarge graphene oxide (GO) liquid crystals (LCs) is demonstrated here for the fabrication of a flexible hybrid material for charge capacitive application. Uniform decoration of α‐Fe₂O₃ nanorods on a poly(3,4‐ethylene‐dioxythiophene): poly(styrenesulfonate) (PEDOT:PSS)‐functionalized, ultralarge GO scaffold results in a 3D interconnected layer‐by‐layer (LBL) architecture. This advanced interpenetrating network of ternary components is lightweight, foldable, and possesses highly conductive pathways for facile ion transportation and charge storage, making it promising for high‐performance energy‐storage applications. Having such structural merits and good synergistic effects, the flexible architecture exhibits a high specific discharge capacitance of 875 F g^?1 and excellent volumetric specific capacitance of 868 F cm^?3 at 5 mV s^?1, as well as a promising energy density of 118 W h kg^?1 (at 0.5 A g^?1) and promising cyclability, with capacity retention of 100% after 5000 charge–discharge (CD) cycles. This synthesis method provides a simple, yet efficient approach for the solution‐processed LBL insertion of the hematite nanorods (HNR) into CP‐functionalized novel composite structure. It provides great promise for the fabrication of a variety of metal‐oxide (MO)‐nanomaterial‐based binder and current collector‐free flexible composite electrodes for high‐performance energy‐storage applications.     

Converting of the 2D graphene to its 3D by chicken red blood cells as sheets separator for construction supercapacitor electrode

Here, we report on a facile green and scalable method for the fabrication of porous 3D graphene as a well-known carbon-based material used in many energy storage devices. Chicken red blood cells were used as sheets spacer and heteroatom sources in the construction of 3D graphene. First, the red blood cells were separated from the blood and mixed with graphene oxide. Then, the mixture was freeze-dried and carbonized at 700 °C. The resulted 3D graphene containing heteroatoms was used as a supercapacitor electrode modifier on a glassy carbon electrode and tested with various electrochemical techniques. The supercapacitor electrode showed a specific capacitance of 330 F g⁻¹ at a current density of 1 A g⁻¹, maximum power density of 1958 W kg⁻¹, and maximum energy density of 85 Wh kg⁻¹. Furthermore, the supercapacitive performances were tested in a two-electrode symmetrical system which exhibited a specific capacitance of 238 F g⁻¹ for 1 A g⁻¹. It also showed a power density of 2200 W kg⁻¹ and an appreciable energy density of 160 Wh kg⁻¹. The excellent electrochemical behavior of 3D graphene indicates the promising abilities of the composite for other applications such as biosensors, batteries, electrocatalysts, etc.     

3D Array of Bi2S3 Nanorods Supported on Ni Foam as a Highly Efficient Integrated Oxygen Electrode for the Lithium‐Oxygen Battery

Bismuth sulfide nanorod array is directly grown on nickel foam (R‐Bi₂S₃/NF) to serve as a completely carbon and binder‐free 3D porous oxygen electrode material for lithium‐oxygen (Li‐O₂) batteries. The synergistic effect of the fast kinetics of electron transport and gas and electrolyte diffusion provided by the continuous free‐standing network structure and the excellent electrocatalytic activity of the bismuth sulfide nanorod array enables outstanding performance of the oxygen electrode. Li‐O₂ battery with the free‐standing R‐Bi₂S₃/NF oxygen electrode exhibits high energy efficiency (78.7%), good rate capability (4464 mA h g⁻¹ at 1500 mA g⁻¹), as well as excellent cyclability (146 cycles) while maintaining a moderate specific capacity of 1000 mA h g⁻¹. The effect of cathodes with different reactant (O₂) and intermediate (LiO₂) adsorbability on the product (Li₂O₂) growth model is studied by first‐principle calculations. The strong O₂ adsorption and weak LiO₂ adsorption on Bi₂S₃ drives the growth of large‐size Li₂O₂ particles via solution growth model. Remarkably, the large‐area pouch‐type Li‐O₂ battery delivers an energy density of 330 Wh kg⁻¹. The present results open up a promising avenue toward developing novel electrode architecture for high‐performance Li‐O₂ batteries through controlling morphology and functionality of porous electrodes.     

Nickel, cobalt, and manganese oxide composite as an electrode material for electrochemical supercapacitors

A composite material, Ni_1/3Co_1/3Mn_1/3(OH)₂, is synthesized by chemical precipitation method for supercapacitors' electrode material. Physical characterizations using x-ray diffraction, energy-dispersive x-ray, and scanning electron microscopy show that Ni_1/3Co_1/3Mn_1/3(OH)₂ possesses an amorphous structure and higher specific surface area (268.5 m²?g^?1), which lead to a high initial specific capacitance of 1,403 F?g^?1 in the potential window of 0–1.5 V. It may be a potential electrode material for future supercapacitor when its cycling stability and rate performance are addressed.     

Liquid Crystalline Dispersions of Graphene‐Oxide‐Based Hybrids: A Practical Approach towards the Next Generation of 3D Isotropic Architectures for Energy Storage Applications

We report the use of the spray pyrolysis method to design self‐assembled isotropic ternary architectures made up of reduced graphene oxide (GO), functionalized multiwalled carbon nanotubes, and nickel oxide nanoparticles for cost‐effective high‐performance supercapacitor devices. Electrodes fabricated from this novel ternary system exhibit exceptionally high capacitance (2074 Fg^?1) due to the highly conductive network, synergistic link between GO and carbon nanotubes and achieving high surface area monodispersed NiO decorated rGO/CNTs composite employing the liquid crystallinity of GO dispersions. To further assess the practicality of this material for supercapacitor manufacture, we assembled an asymmetric supercapacitor device incorporating activated carbon as the anode. The asymmetric supercapacitor device showed remarkable capacity retention (>96%), high energy density (23 Wh kg^?1), and a coulombic efficiency of 99.5%.     

Facile Fabrication of Bicomponent CoO/CoFe2O4‐N‐Doped Graphene Hybrids with Ultrahigh Lithium Storage Capacity

A facile strategy is developed to fabricate bicomponent CoO/CoFe₂O₄‐N‐doped graphene hybrids (CoO/CoFe₂O₄‐NG). These hybrids are demonstrated to be potential high‐performance anodes for lithium‐ion batteries (LIBs). The CoO/CoFe₂O₄ nanoplatelets are finely dispersed on the surface of N‐doped graphene nanosheets (CoO/CoFe₂O₄‐NG). The CoO/CoFe₂O₄‐NG electrode exhibits ultrahigh specific capacity with 1172 mA h g^?1 at 500 mA g^?1 and 970 mA h g^?1 at 1000 mA g^?1 as well as excellent cycle stability due to the synergetic effects of N‐doped graphene and CoO/CoFe₂O₄ nanoplatelets. The well‐dispersed bicomponent CoO/CoFe₂O₄ is responsible for the high specific capacity. The N‐doped graphene with high specific surface area has dual roles: to provide active sites for dispersing the CoO/CoFe₂O₄ species and to function as an electrical conducting matrix for fast charge transfer. This method provides a simple and efficient way to configure the hybridized electrode materials with high lithium storage capacity.     

The In Situ Synthesis of Fe(OH)3 Film on Fe Foam as Efficient Anode of Alkaline Supercapacitor Based on a Promising Fe3+/Fe0 Energy Storage Mechanism

Herein, a simple in situ charge/discharge activation strategy is proposed to synthesize Fe(OH)3 film on Fe foam as an efficient anode of supercapacitors. The physical characteristics of electrodes are characterized and the electrochemical energy storage performances are investigated. Importantly, it is demonstrated the as‐synthesized Fe(OH)3@Fe foam electrode adopted a novel Fe³⁺/Fe⁰ redox reaction mechanism for energy storage in alkaline electrolytes. Compared with previously reported Fe³⁺/Fe²⁺ mechanisms, the Fe³⁺/Fe⁰ redox couple shows a more promising application value (e.g., higher theoretical‐specific capacitance, excellent conductivity of its reduction state). As for supercapacitor anodes, the electrode achieves high areal capacitance of 5.55–3.94 F cm⁻² at a current range of 20–200 mA cm⁻² and shows good stability for high‐rate and long‐term cycling. The assembled single supercapacitor device gives a high energy density of 11.64–7.43 Wh m⁻² at a power density of 157–1461 W m⁻². More importantly, the as‐adopted in situ activation strategy may also have potential value for synthesizing other transition metal oxide‐based products.     

Composites of olive-like manganese oxalate on graphene sheets for supercapacitor electrodes

MnC₂O₄/graphene composites are prepared by a facile hydrothermal reaction with KMnO₄ using ascorbic acid as a reducing agent. Olive-like MnC₂O₄ particles are distributed uniformly on the surface of graphene sheets. The composites are evaluated as supercapacitor electrodes, which show that the specific capacitance of MnC₂O₄/graphene composites is 122 F g^?1, more than twice as high as that of free MnC₂O₄ at a current density of 0.5 A g^?1. In addition, this composite material exhibits an excellent cycle stability with the capacitance retention of 94.3 % after 1,000 cycles.     

Hexagonal-like NiCo<Subscript>2</Subscript>O<Subscript>4</Subscript> nanostructure based high-performance supercapacitor electrodes

A novel approach of double hydroxide-mediated synthesis of nickel cobaltite (NiCo₂O₄) electro-active material by the hydrothermal method is reported. The obtained NiCo₂O₄ electro-active material displays the spinel cubic phase and hexagonal-like morphology. Thermogravimetry analysis confirms the thermal stability of the electrode material. The functional groups and phase formation of NiCo₂O₄ have been confirmed by FT-IR and Raman spectral analysis. The modified NiCo₂O₄ electrode exhibits the highest specific capacitance of 767.5 F g^?1 at a current density of 0.5 A g^?1 in 3 M KOH electrolyte and excellent cyclic stability (94 % capacitance retention after 1000 cycles at a high current density of 5 A g^?1). The excellent electrochemical performance of the electrode is attributed to the hexagonal-like morphology, which contributes to the rich surface electro-active sites and easy transport pathway for the ions during the electrochemical reaction. The attractive Faradic behavior of NiCo₂O₄ electrode has been ascribed to the redox contribution of Ni²⁺/Ni³⁺ and Co²⁺/Co³⁺ metal species in the alkaline medium. The symmetrical two-electrode cell has been fabricated using the NiCo₂O₄ electro-active material with excellent electrochemical properties for supercapacitor applications.     

Synthesis of Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript>-reduced graphene oxide composite and its application for hybrid supercapacitors

We describe in this paper the synthesis and the characterization of Li₄Ti₅O₁₂-reduced graphene oxide (LTO-RGO) composite and demonstrate their use as hybrid supercapacitor, which is consist of an LTO negative electrode and activate carbon (AC) positive electrode. The LTO-RGO composites were synthesized using a simple, one-step process, in which lithium sources and titanium sources were dissolved in a graphene oxide (GO) suspension and then thermal treated in N₂. The lithium-ion battery with LTO-RGO composite anode electrode revealed higher discharge capacity (167 mAh g^?1 at 0.2 C) and better capacity retention (67%) than the one with pure LTO. Meanwhile, compared with the AC//LTO supercapacitor, the AC//LTO-RGO hybrid supercapacitor exhibits higher energy density and power density. Results show that the LTO-RGO composite is a very promising anode material for hybrid supercapacitor.     

Co3O4 Hollow Nanoparticles and Co Organic Complexes Highly Dispersed on N‐Doped Graphene: An Efficient Cathode Catalyst for Li‐O2 Batteries

Rechargeable Li‐O₂ batteries are promising candidates for electric vehicles due to their high energy density. However, the current development of Li‐O₂ batteries demands highly efficient air cathode catalysts for high capacity, good rate capability, and long cycle life. In this work, a hydrothermal‐calcination method is presented to prepare a composite of Co₃O₄ hollow nanoparticles and Co organic complexes highly dispersed on N‐doped graphene (Co–NG), which acts as a bifunctional air cathode catalyst to optimize the electrochemical performances of Li‐O₂ batteries. Co–NG exhibits an outstanding initial discharge capacity up to 19 133 mAh g^?1 at a current density of 200 mA g^?1. In addition, the batteries could sustain 71 cycles at a cutoff capacity of 1000 mAh g^?1 with low overpotentials at the current density of 200 mA g^?1. Co–NG composites are attractive as air cathode catalysts for rechargeable Li‐O₂ batteries.     

Preparation of Co3O4 nanoplate/graphene sheet composites and their synergistic electrochemical performance

Co₃O₄ nanoplate/graphene sheet composites were prepared through a two-step synthetic method. The composite material as prepared was characterized using X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and energy-dispersive X-ray spectroscopy. The platelet-like morphology of Co₃O₄ leads to a layer-by-layer-assembled structure of the composites and a good dispersion of Co₃O₄ nanoplates on the surface of graphene sheets. The electrochemical characteristics indicate that the specific capacitance of the composites is 337.8 F?g^?1 in comparison with the specific capacitance of 204.4 F?g^?1 without graphene sheets. Meanwhile, the composites have an excellent rate capability and cycle performance. The results show that the unique microstructure of the composites enhances the electrochemical capacitive performance of Co₃O₄ nanoplates due to the three-dimensional network of graphene sheets for electron transport increasing electric conductivity of the electrode and providing unobstructed pathways for ionic transport during the electrochemical reaction.     

Enhanced electrochemical performance of porous activated carbon by forming composite with graphene as high-performance supercapacitor electrode material

In this work, a novel activated carbon containing graphene composite was developed using a fast, simple, and green ultrasonic-assisted method. Graphene is more likely a framework which provides support for activated carbon (AC) particles to form hierarchical microstructure of carbon composite. Scanning electron microscope (SEM), transmission electron microscope (TEM), Brunauer–Emmett–Teller (BET) surface area measurement, thermogravimetric analysis (TGA), Raman spectra analysis, XRD, and XPS were used to analyze the morphology and surface structure of the composite. The electrochemical properties of the supercapacitor electrode based on the as-prepared carbon composite were investigated by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), charge/discharge, and cycling performance measurements. It exhibited better electrochemical performance including higher specific capacitance (284 F g^?1 at a current density of 0.5 A g^?1), better rate behavior (70.7% retention), and more stable cycling performance (no capacitance fading even after 2000 cycles). It is easier for us to find that the composite produced by our method was superior to pristine AC in terms of electrochemical performance due to the unique conductive network between graphene and AC.