Janus cylinders at liquid-liquid interfaces

We describe the first study on the self-assembly behavior of Janus cylinders at liquid/liquid interfaces. The Janus cylinders are characterized by a phase separation along the major axis into two hemicylinders of different wettability. The pendant drop technique and microscopic imaging were used to characterize the adsorption behavior and self-assembly of Janus cylinders at perfluorinated oil/dioxane and perfluorinated oil/dimethyl sulfoxide interfaces. According to the evolution of the interfacial tension and a series of TEM images taken during the cylinder adsorption, we will specify the characteristics of early to late stages of the Janus cylinder adsorption at a liquid-liquid interface and discuss the effect of Janus cylinder length and their concentration. We also establish that the broken symmetry of the corona leads to significantly higher interfacial activity as compared to homogeneous core-shell cylinders. The adsorption is characterized by three different adsorption stages: first, free diffusion to the interface, followed by continuous adsorption of cylinders including ordering and domain formation and, finally, additional packing with a rearrangement of domains and formation of a loose multilayer system.     

Role of interfacial water on protein adsorption at cross-linked polyethylene oxide interfaces

Sum frequency generation (SFG) vibrational spectroscopy was used to study the structure of water at cross-linked PEO film interfaces in the presence of human serum albumin (HSA) protein. Although PEO is charge neutral, the PEO film/water interface exhibited an SFG signal of water similar to that of a highly charged water/silica interface, signifying the presence of ordered water. Ordered water molecules were observed not only at the water/PEO interface, but also within the PEO film. It indicates that the PEO and water form an ordered hydrogen-bonded network extending from the bulk PEO film into liquid water, which can provide an energy barrier for protein adsorption. Upon exposure to the protein solution, the SFG spectra of water at the water/PEO interface remained nearly unperturbed. For comparison, the SFG spectra of water/silica and water/polystyrene interfaces were also studied with and without HSA in the solution. The SFG spectra of the interfacial water were correlated with the amount of protein adsorbed on the surfaces using fluorescence microscopy, which showed that the amount of protein adsorbed on the PEO film was about 10 times less than that on a polystyrene film and 3 times less than that on silica.     

Synthesis of mesoporous carbons using ordered and disordered mesoporous silica templates and polyacrylonitrile as carbon precursor

Mesoporous carbons were synthesized from polyacrylonitrile (PAN) using ordered and disordered mesoporous silica templates and were characterized using transmission electron microscopy (TEM), powder X-ray diffraction, nitrogen adsorption, and thermogravimetry. The pores of the silica templates were infiltrated with carbon precursor (PAN) via polymerization of acrylonitrile from initiation sites chemically bonded to the silica surface. This polymerization method is expected to allow for a uniform filling of the template with PAN and to minimize the introduction of nontemplated PAN, thus mitigating the formation of nontemplated carbon. PAN was stabilized by heating to 573 K under air and carbonized under N2 at 1073 K. The resulting carbons exhibited high total pore volumes (1.5-1.8 cm3 g(-1)), with a primary contribution of the mesopore volume and with relatively low microporosity. The carbons synthesized using mesoporous templates with a 2-dimensional hexagonal structure (SBA-15 silica) and a face-centered cubic structure (FDU-1 silica) exhibited narrow pore size distributions (PSDs), whereas the carbon synthesized using disordered silica gel template had broader PSD. TEM showed that the SBA-15-templated carbon was composed of arrays of long, straight, or curved nanorods aligned in 2-D hexagonal arrays. The carbon replica of FDU-1 silica appeared to be composed of ordered arrays of spheres. XRD provided evidence of some degree of ordering of graphene sheets in the carbon frameworks. Elemental analysis showed that the carbons contain an appreciable amount of nitrogen. The use of our novel infiltration method and PAN as a carbon precursor allowed us to obtain ordered mesoporous carbons (OMCs) with (i) very high mesopore volume, (ii) low microporosity, (iii) low secondary mesoporosity, (iv) large pore diameter (8-12 nm), and (v) semi-graphitic framework, which represent a desirable combination of features that has not been realized before for OMCs.     

Control of aggregation of nanoparticles by double-hydrophilic block copolymers: a dissipative particle dynamics study

Double-hydrophilic block copolymer (DHBC)-directed mineralization is investigated by dissipative particle dynamics (DPD) simulation. By mineralization, we refer to the formation of inorganic crystals from the solution. In the current study, the DHBCs are modeled as chains of A and B blocks with repulsion between unlike blocks, while the mineralization is approximated by aggregation of hydrophobic nanoparticles from the solution. Depending on the relative concentrations of nanoparticles and DHBC, dispersed spherical aggregates, hexagonally packed cylinders, and ordered lamellae structures are obtained. The structures formed are seen to be controlled by competing forces between aggregation of nanoparticles, the interaction of DHBC with nanoparticles, and the self-assembly of DHBC in the solution. The time evolutions of hexagonally packed cylinders and ordered lamellae are studied. For the development of cylinders, nanoparticles first aggregate into orientationally disordered small cylinders, then these cylinders slowly grow into hexagonally packed long cylinders. For the development of ordered lamellae, nanoparticles first form a disordered structure, then grow into disordered lamellae, and at last evolve into ordered lamellae. The simulation demonstrates that addition of DHBC can effectively control the aggregation of inorganic particles and lead to formation of a variety of nanostructures.     

Template-directed assembly of a de novo designed protein

Many naturally occurring biomaterials are composed of laminated structures in which layers of beta-sheet proteins alternate with layers of inorganic mineral. These ordered laminates often have structural and mechanical properties that differ significantly from those of nonbiological materials. An important step in the construction of novel biomaterials is the creation of composites wherein a de novo designed protein assembles into an ordered structure. To achieve this goal, we layered a de novo protein onto the surface of highly ordered pyrolytic graphite (HOPG). The protein was derived from a combinatorial library of novel sequences designed to fold into amphiphilic beta-sheet structures. Atomic force microscopy reveals that the protein assembles on the HOPG surface into ordered fibers aligned in three orientations at 120 degrees to each other. The symmetry and extent of the ordered regions indicate that the hexagonal lattice underlying the graphite surface templates assembly of millions of protein molecules into a highly ordered structure.     

Influence of bonded-phase coverage in reversed-phase liquid chromatography via molecular simulation I. Effects on chain conformation and interfacial properties

Particle-based Monte Carlo simulations were employed to examine the effects of bonding density on molecular structure in reversed-phase liquid chromatography. Octadecylsilane stationary phases with five different bonding densities (1.6, 2.3, 2.9, 3.5, and 4.2 mumol/m(2)) in contact with a water/methanol (50/50 mol%) mobile phase were simulated at a temperature of 323 K. The simulations indicate that the alkyl chains become more aligned and form a more uniform alkyl layer as coverage is increased. However, this does not imply that the chains are highly ordered (e.g., all-trans conformation or uniform tilt angle), but rather exhibit a broad distribution of conformations and tilt angles at all bonding densities. At lower densities, significant amounts of the silica surface are exposed leading to an enhanced wetting of the stationary phase. At high densities, the solvent is nearly excluded from the bonded phase and persists only near the residual silanols. An enrichment in the methanol concentration and a disruption in the mobile phase's hydrogen bond network are observed at the interface as bonding density is increased.     

Molecular Dynamics Simulation of the Ionic Liquid 1-n-Butyl-3-Methylimidazolium Methylsulfate [Bmim][MeSO4]: Interfacial Properties at the Silica and Vacuum Interfaces

Molecular dynamics simulations are done to investigate the structure and dynamics of a thin [Bmim][MeO₄] film in contact with a hydroxylated silica surface on one side and with vacuum on the other. An examination of the microscopic structure of ionic liquid (IL) film shows that strong layered anionic/cationic structures are formed at both interfaces. At the silica interface, the imidazolium rings are closer to the silica surface (compared to anions) and are coplanar with it. At the vacuum interface, the charged imidazolium ring more concentrates in the interior of the film, but the butyl side chain stretches out toward the vacuum interface. While there exists an excess concentration of the cations at the silica interface, at the vacuum interface an excess concentration of anions (dissolved in the butyl chain) is found. The influence of the interface on the dynamical properties is shown to depend on their time scales. A short-time dynamical property, such as hydrogen bond formation is not noticeably perturbed at the interface. In contrary, long-time properties such as ion-pair formation/rupture and translation of ions across the film are largely decelerated at the silica interface but are accelerate at the vacuum interface. Our findings indicate that the structural relaxation time of ion-pairs, is comparable to diffusion time scale in the IL film. Therefore, ion-pairs are not stable species; the IL is composed of short-lived ion-pairs and freely diffusing ions. However, the structural relaxation times of ion-pairs is still long enough (comparable to the time scale of diffusion) to conclude that correlated motions of counterions influence the macroscopic properties of IL, such as diffusion and ionic conductivity. In this respect, we have shown that correcting the Nernst-Einstein equation for the joint translation of ion-pairs considerably improves the accuracy of calculated ionic conductivities.     

嵌段共聚物薄膜在电化学能源领域的应用

采取选择性掺杂方法,将新型两亲性液晶嵌段共聚物薄膜功能化为具有各向异性的锂离子导电材料.这类薄膜不仅具有同轴且垂直取向的一维离子导电通道,而且可以在大面积范围内形成规则的阵列,可以作为锂离子电池、燃料电池等电化学能源系统的新型电解质.另一方面,这类薄膜作为模板可制备周期性排列的纳米孔、纳米粒子、纳米线阵列,形成的有序纳米结构材料可作为锂离子电池的三维电极.     

Silica-surfactant-polyelectrolyte film formation: evolution in the subphase

We have previously reported that robust mesostructured films will grow at the surface of alkaline solutions containing cetyltrimethylammonium bromide (CTAB), polyethylenimine (PEI), and silica precursors. Here we have used time-resolved small-angle X-ray scattering to investigate the structural evolution of the micellar solution from which the films form, at several different CTAB-PEI concentrations. Simple models have been employed to quantify the size and shape of the micelles in the solution. There are no mesostructured particles occurring in the CTAB-PEI solution prior to silica addition; however, after the addition of silicate species the hydrolysis and condensation of these species causes the formation of mesophase particles in a very short time, much faster than ordering observed in the film at the interface. The mesophase within the CTAB-PEI-silica particles finally rearranges into a 2D hexagonal ordered structure. With the aid of the previous neutron reflectivity data on films formed at the air/water interface from similar solutions, a formation mechanism for CTAB-PEI-silica films at the air/water interface has been developed. We suggest that although the route of mesostructure evolution of the film is the same as that of the particles in the solution, the liquid crystalline phase at the interface is not directly formed by the particles that developed below the interface.     

Tunable helical assemblies of L-alanine methyl ester-containing polyphenylacetylene

The self-assemblying behaviors of L-alanine methyl ester-containing polyphenylacetylene (PPA-Ala, in Chart 1 ) were investigated upon the evaporation of its solvent on mica and on air/water interfaces. The introduction of chiral amino acid attachments to the polyphenylacetylene backbone induced a helical conformation of the backbone, which was stabilized by various noncovalent interactions, especially hydrophobic effect and hydrogen bonds. The helicity of the polymer was further amplified in its higher-order self-assemblies as the formation of helical fibers on the surface of mica upon natural evaporation of its THF solution. By LB technique, the polymer chains were guided to form ordered parallel ridges and highly aligned, with their helical conformation still remaining. The reorganization of the chiral polymer chains on air/water interface was associated with the additional hydrophobic effect of PPA-Ala on an air/water interface. The polymer backbones had to adopt different arrangements to minimize their contact with water, and this adjustment led to the formation of aligned polymer ridges under proper surface pressure.     

Crystalline structure and morphology of microphases in compatible mixtures of poly(tetrahydrofuran‐methyl methacrylate) diblock copolymer and polytetrahydrofuran

The crystalline structure and morphology of compatible mixtures of poly(tetrahydrofuran‐methyl methacrylate) diblock copolymers (PTHF‐b‐PMMA) with a polytetrahydrofuran homopolymer (PTHF) were studied with synchrotron X‐rays. Wide‐angle diffraction was used to study the crystalline structures in a confined lamellar region with a PTHF thickness ranging from 12.2 to 19.5 nm, and in a PTHF matrix with an interface distance between the PMMA cylinders ranging from 17 to 22 nm. As the above thickness values are around the long period (ca. 17 nm) of PTHF homopolymer under the crystallization condition used, the crystalline structure has been found to be very sensitive to the average thickness of the PTHF phase. The changes in the diffraction patterns with changing PTHF homopolymer content suggested a chain folding model in confined PTHF lamellae with the PTHF fiber axes being perpendicular to the thick PTHF lamella. In the case of hexagonally packed cylindrical PMMA microdomains with an interface distance ranging from 12 to 16 nm, the effects of PMMA cylinders on the crystallization morphology of PTHF in the PTHF matrix, and the effects of the PTHF crystallization on the hexagonally packed structure of PMMA cylinders were also studied. It is shown that only when the interdistance of two neighboring PMMA cylinders is comparable with the long period of the pure PTHF homopolymer, ordered PTHF stacks can be formed in the PTHF matrix. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 779–792, 1999     

形成晶体条纹的一个界面反应-扩散模型

基于晶体生长动力学的非平衡非线性特性和耗散结构的概念,提出了一个非理想的界面反应一扩散模型,其中界面动力学引起的晶面多重态现象和扩散过程的耦合可导致滞后现象。它可以解释某些晶体中有序条纹的形成。     

气-液界面有序介孔SiO2无机膜的仿生合成

早在几百万年以前,自然界就通过生物矿化过程形成了结构高度有序的有机/无机复合材料,如哺乳动物的牙床、骨骼以及贝壳珍珠层等[1]。随着对天然生物材料生物矿化过程研究的逐渐深入,材料研究者从中得到极为重要的启示:先形成有机物自组装体,无机先驱物在自组装聚集体与溶液相的界面处发生化学反应,在有机自组装体的模板作用下,形成有机/无机复合体,再将有机模板去除即可得到具有一定形状与组织结构的无机材料。这种模仿生物矿化中无机物在有机物调制下形成过程的材料合成,称为仿生合成(biomimetic synthesis)[2]。仿生合成过程中,通过选择有…     

Conversion of cellulose materials into nanostructured ceramics by biomineralization

Synthesis of hierarchically ordered silica materials having ordered wood cellular structures has been demonstrated through in-situ mineralization of wood by means of surfactant-directed mineralization in solutions of different pH. At low pH, silicic acid penetrates the buried interfaces of the wood cellular structure without clogging the pores to subsequently “molecularly paint” the interfaces thereby forming a positive replica following calcinations. At high pH, the hydrolyzed silica rapidly condenses to fill the open cells and pits within the structure resulting in a negative replica of the structure. Surfactant-templated mineralization in acid solutions leads to the formation of micelles that hexagonally pack at the wood interfaces preserving structural integrity while integrating hexagonally ordered nanoporosity into the structure of the cell walls following thermal treatment in air. The carbothermal reduction of mineralized wood with silica at high temperature produces biomorphic silicon carbide (SiC) materials, which are typical aggregations of β-SiC nanoparticles. To understand the roles of each component (lignin, crystalline cellulose, amorphous cellulose) comprising the natural biotemplates in the transformation to SiC rods, three different cellulose precursors including unbleached and bleached pulp, and cellulose nanocrystals have been utilized. Lignin in unbleached pulp blocked homogeneous penetration of silica into the pores between cellulose fibers resulting in non-uniform SiC fibers containing thick silica layers. Bleached pulp produced uniform SiC rods with camelback structures (80 nm in diameter; ∼50 μm in length), indicating that more silica infiltrates into the amorphous constituent of cellulose to form chunky rather than straight rod structures. The cellulose nanocrystal (CNXL) material produced clean and uniform SiC nanowires (70 nm in diameter; >100 μm in length) without the camelback structure.     

Pesticide analysis by MEKC on a microchip with hydrodynamic injection from organic extract

An integrated microchip for monitoring carbamate pesticides in environmental water using continuous flow chemical processes is under development, i. e., the integration of hydrolysis, azo-derivatization, liquid-liquid extraction, electrophoretic separation, and quantification. The separation of the derivatives of four carbamate pesticides (carbaryl, carbofuran, propoxur, and bendiocarb) extracted in the continuous flow of a 1-butanol phase was studied in a silica microchip using micellar EKC. A baseline separation of four pesticide derivatives was achieved on a silica chip using hydrodynamic injection with electroosmotic gating. Detection using a thermal lens microscope showed good linearity in the concentration range of 10(-6 )-10(-5 )M with an LOD of 5 x 10(-7) M, which is superior to that of conventional CE with UV absorption detection at a level of 10(-4) M.     

Growth of mesoporous materials within colloidal crystal films by spin-coating

A combination of colloidal crystal planarization, stabilization, and novel infiltration techniques is used to build a bimodal porous silica film showing order at both the micron and the nanometer length scale. An infiltration method based on the spin-coating of the mesophase precursor onto a three-dimensional polystyrene colloidal crystal film allows a nanometer control tuning of the filling fraction of the mesoporous phase while preserving the optical quality of the template. These materials combine a high specific surface arising from the nanopores with increased mass transport and photonic crystal properties provided by the order of the macropores. Optical Bragg diffraction from these type of hierarchically ordered oxides is observed, allowing performing of optical monitoring of the different processes involved in the formation of the bimodal silica structure.     

Spontaneous formation of cluster array of gold particles by convective self-assembly

Cluster arrays composed of metal nanoparticles are promising for application in sensing devices because of their interesting surface plasmon characteristics. Herein, we report the spontaneous formation of cluster arrays of gold colloids on flat substrates by vertical-deposition convective self-assembly. In this technique, under controlled temperature, a hydrophilic substrate is vertically immersed in a colloid suspension. Cluster arrays form when the particle concentration is extremely low (in the order of 10(-6)-10(-8) v/v). These arrays are arranged in a hierarchically ordered structure, where the particles form clusters that are deposited at a certain separation distance from each other, to form "dotted" lines that are in turn aligned with a constant spacing. The size of the cluster can be controlled by varying the particle concentration and temperature while an equal separation distance is maintained between the lines formed by the clusters. Our technique thus demonstrates a one-step, template-free fabrication method for cluster arrays. In addition, through the direct observation of the assembly process, the spacing between the dotted lines is found to result from the "stick-and-slip" behavior of the meniscus tip, which is entirely different from the formation processes observed for the striped patterns, which we reported previously at higher particle concentrations. The difference in the meniscus behavior possibly comes from the difference in colloidal morphology at the meniscus tip. These results demonstrate the self-regulating characteristics of the convective self-assembly process to produce colloidal patterns, whose structure depends on particle concentration and temperature.     

Continuous synthesis process of hexagonal nanoplates of P6m ordered mesoporous silica

Hexagonally ordered mesoporous silica coined COK-12 was synthesized in a continuous process by combining streams of sodium silicate and citric acid/sodium citrate buffered solution of (ethylene oxide)(20)-(propylene oxide)(70)-(ethylene oxide)(20) triblock copolymer (Pluronic P123) from separate reservoirs. COK-12 precipitated spontaneously upon combining both streams at nearly neutral pH and ambient temperature. Stable intermediates of the COK-12 formation process could be prepared by limiting sodium silicate addition. Investigation of these intermediates using small-angle X-ray scattering revealed COK-12 formed via an assembly process departing from spherical uncharged core-shell P123-silica micelles. The sterical stabilization of these micelles decreased upon accumulation of silicate oligomers in their shell. Aggregation of the spherical micelles led to cylindrical micelles, which aligned and adopted the final hexagonal organization. This unprecedentedly fast formation of P6m ordered mesoporous silica was caused by two factors in the synthesis medium: the neutral pH favoring uncharged silicate oligomers and the high salt concentration promoting hydrophobic interactions with surfactant micelles leading to silica accumulation in the PEO shell. The easy continuous synthesis process is convenient for large-scale production. The platelet particle morphology with short and identical internal channels will be advantageous for many applications such as pore replication, nanotube or fiber growth, catalytic functionalization, drug delivery, film and sensor development, and in nano dyes as well as for investigation of pore diffusion phenomena.     

Direct printing of self-assembled lipid tubules on substrates

Lipid tubules formed by rolled-up bilayer sheets have shown promise in drug delivery systems, nanofluidics, and microelectronics. Here we report a method for directly printing lipid tubules on substrates. Preformed lipid tubules of 1,2-bis(tricosa-10,12-diynoyl)-sn-glycero-3-phosphocholine are aligned in the recessed channels of a thin poly(dimethylsiloxane) (PDMS) stamp. The aligned lipid tubules then serve as an "ink" for microcontact printing. We demonstrate that two-dimensional (2-D) arrays of aligned lipid tubules can be transferred onto planar, patterned, and curved substrates from the recessed channels of the PDMS stamp by bringing the tubule-inked PDMS stamp into contact with these substrates. We show that the 2-D array of aligned lipid tubules can be transcribed into a 2-D array of aligned silica cylinders through templated sol-gel condensation of tetraethoxysilane.