Preparation and self-assembly of pH-sensitive amphiphilic comb-shaped copolymer containing long fluorinated side chains

Novel pH-sensitive amphiphilic comb-shaped copolymers containing long fluorinated side chains, which combined the characteristics of pH-sensitivity from pendent tertiary amine groups, unique hydrophobic and fluorophobic characteristic from the fluorinated moieties and hydrophilicity from the poly (ethylene glycol) segments, were designed and synthesized via radical polymerizaion of 2-(Dimethylamino) ethyl methacrylate (DMAEMA), poly (ethylene glycol) methyl ether methacrylate (PEGMA) and homemade fluorinated macromonomer (PHFBMA-GMA). The physicochemical properties of polymeric micelles prepared therefrom were investigated. The chemical structures of the copolymers were characterized by GPC, FTIR and ¹H-NMR. The critical micelle concentrations (CMC) of the copolymers in different pH (5.0 and 7.4) were determined by fluorescence spectroscopy. Larger CMCs could be obtained in lower pH since the pronation of DMAEMA moieties enhanced the hydrophilicity. With increasing the amount, as well as the molecular weight, of PHFBMA-GMA, CMC decreased significantly. As pH decreased, particle size, as well as zeta potential of the polymeric micelles increased significantly, indicating significant pH-sensitivity of the polymeric micelles. Furthermore, larger polymeric micelles were obtained with larger amount, as well as higher molecular weight, of PHFBMA-GMA. Transmission electron microscopy (TEM) showed that the morphological shapes of the copolymers performed spherical micelles. The cytotoxicity test showed that the comb-shaped copolymers performed extremely low cytotoxicity. The pH-sensitive polymeric micelles prepared from the amphiphilic comb-shaped copolymers containing long fluorinated side chains could be potential candidates for nanotanks for hydrophobic or fluorophobic molecules and drug carriers and the facile preparation might fit for large scale industrialization.     

Characterization of novel pH-sensitive polymeric micelles prepared by the self-assembly of amphiphilic block copolymer with poly-4-vinylpyridine block synthesized by mechanochemical solid-state polymerization

We fabricated novel pH-sensitive polymeric micelles consisting of amphiphilic block copolymer containing pyridyl groups as side chains in the hydrophobic block. The number average particle diameter of the polymeric micelles at pH 7 was approximately 200 nm. A decrease in pH resulted in deformation of the polymeric micelles over a very narrow pH range (between pH 5.7 and 5.6). Interestingly, micellization and demicellization occurred reversibly in this narrow pH range. Polymeric micelles incorporating 5-fluorouracil (5FU) were also prepared. Decreasing the pH of this polymeric micelle solution from 7 to 5.5 resulted in the rapid release of 5FU at pH 5.6; the drug was completely released within 30 min. These results suggest that deformation of the polymeric micelles caused the rapid release of 5FU.     

Thermo/pH Dual Responsive Mixed‐Shell Polymeric Micelles Based on the Complementary Multiple Hydrogen Bonds for Drug Delivery

Thermo/pH dual responsive mixed‐shell polymeric micelles based on multiple hydrogen bonding were prepared by self‐assembly of diaminotriazine‐terminated poly(?‐caprolactone) (DAT‐PCL), uracil‐terminated methoxy poly(ethylene glycol) (MPEG‐U), and uracil‐terminated poly(N‐vinylcaprolactam) (PNVCL‐U) at room temperature. PCL acted as the core and MPEG/PNVCL as the mixed shell. Increasing the temperature, PNVCL collapsed and enclosed the PCL core, while MPEG penetrated through the PNVCL shell, thereby leading to the formation of MPEG channels on the micelles surface. The low cytotoxicity of the mixed micelles was confirmed by an MTT assay against BGC‐823 cells. Studies on the in vitro drug release showed that a much faster release rate was observed at pH 5.0 compared to physiological pH, owing to the dissociation of hydrogen bonds. Therefore, the mixed‐shell polymeric micelles would be very promising candidates in drug delivery systems.     

Self-assembled micellar nanoparticles of a novel star copolymer for thermo and pH dual-responsive drug release

An amphiphilic star block copolymer comprised of a hydrophobic PMMA block and a hydrophilic tri-arm poly(NIPAAm-co-DMAEMA) block was synthesized by copolymerization of NIPAAm and DMAEMA, with Ce(4+) ions and tris(hydroxymethyl)methylamine as a redox initiatory system. The star copolymer undergoes self-assembly to the micellar nanoparticles with a core-shell structure and the thermo/pH dual-response, originated from the thermo-sensitivity of PNIPAAm and the pH-sensitivity of PDMAEMA. A fluorescence probe study showed the pH-dependent low CMCs (7.5 to 11.2 mg/L) of the micelles, confirming the formation of stable micelles. Morphological investigations showed that the blank and drug-loaded micelles both had spherical and uniform shapes. The sizes of the blank and drug-loaded nanoparticles were between 80 and 120 nm, depending on the given pH. The LCSTs of the star copolymer were determined to be 32 degrees C, 36.6 degrees C and 39.5 degrees C, corresponding to pH 5, pH 7.4 and pH 9, respectively, demonstrating a pH-dependent thermo-response. As a drug delivery, the micellar nanoparticles showed the dual-responsive release profiles in vitro, which were confirmed by the drug release studies. The obtained results showed the thermo-triggered accelerated release at pH 7.4, and the pH-triggered accelerated release at 37 degrees C, indicating the micelles nanoparticles would be a promising site-specific drug delivery for enhancing the accumulation of drug in targeting pathological areas.     

Polymeric micelle systems of hydroxycamptothecin based on amphiphilic N-alkyl-N-trimethyl chitosan derivatives

This research investigated the possible utilization of amphiphilic N-octyl-N-trimethyl chitosan (OTMCS) derivatives in solublization and controlled release of 10-hydroxycamptothecin (10-HCPT), a hydrophobic anticancer drug. The release behavior of the 10-HCPT-OTMCS micelles was measured and compared to that of a commercial 10-HCPT lyophilized powder in vitro and in vivo. This research also examined the effects of chemical structure of the chitosan derivatives and the micellar preparation conditions on the encapsulation efficiency, drug loading content, and particle size of the polymeric micelles. The results showed that these chitosan derivatives were able to self-assemble and form spherical shape polymeric micelles with an average particle size range of 24–280 nm and a drug loading content of 4.1–32.5%, depending on the modified structures and loading procedures. The solubility of 10-HCPT in aqueous fluid was increased about 80,000-fold from 2 ng/ml in water to 1.9 mg/ml in OTMCS micellar (degree of octyl and trimethyl substitution is 8% and 54%, respectively) solution. In addition, OTMCS was able to modulate the in vitro release of 10-HCPT and improve its pharmacokinetic properties and lactone ring stability in vivo. These data suggested the possible utilization of the amphiphilic micellar chitosan derivatives as carriers for hydrophobic drugs for improving their delivery and release properties.     

Thermo and pH Dual-Responsive Micelles of N-phthaloylchitosan-g-Poly(N-isopropylacrylamide) and Poly(acrylic acid-co-tert-butyl acrylate) for Drug Delivery

A novel amphiphilic copolymer N-phthaloylchitosan graft poly(N-isopropylacrylamide) and poly(acrylic acid-co-tert-butyl acrylate) (PHCS-g-PNIPAAm&P(AA-co-tBA)) was synthesized. The graft copolymer could form micelles in aqueous medium, and the critical micelle concentration (CMC) of the copolymer was 7.5 × 10^{? 3}mg/mL. The lower critical solution temperature (LCST) of the micelles was measured to be 30°C. Transmission electron microscopy (TEM) image showed that the micelles exhibited a regular spherical shape, and the mean diameter of the micelles was 94.1 ± 0.8 nm as determined by dynamic light scattering (DLS). The potential usefulness of the micelles as drug delivery systems was investigated using anti-inflammation drug prednisone acetate as the model. The drug loading capacity of the micelles was measured to be 22.86 wt%, and the DLS results showed that the mean diameter of the drug-loaded micelles was 133.3 ± 2.4 nm. In vitro drug release studies indicated that the micelles exhibited thermo and pH dual-responsive release profiles.     

Synthesis of self-assemble pH-responsive cyclodextrin block copolymer for sustained anticancer drug delivery

Well-defined p H-responsive poly(ε-caprolactone)-graft-β-cyclodextrin-graft-poly(2-(dimethylamino)ethylmethacrylate)-co-poly(ethylene glycol) methacrylate amphiphilic copolymers(PCL-g-β-CD-g-P(DMAEMA-co-PEGMA)) were synthesized using a combination of atom transfer radical polymerization(ATRP),ring opening polymerization(ROP) and "click" chemistry.Successful synthesis of polymers was confirmed by Fourier transform infrared spectroscopy(FTIR),proton nuclear magnetic resonance(1H-NMR),and gel permeation chromatography(GPC).Then,the polymers could selfassemble into micelles in aqueous solution,which was demonstrated by dynamic light scattering(DLS) and transmission electron microscopy(TEM).The p H-responsive self-assembly behavior of these copolymers in water was investigated at different p H values of 7.4 and 5.0 for controlled doxorubicin(DOX) release,and these results revealed that the release rate of DOX could be effectively controlled by altering the p H,and the release of drug loading efficiency(DLE) was up to 88%(W/W).CCK-8 assays showed that the copolymers had low toxicity and possessed good biodegradability and biocompatibility,whereas the DOX-loaded micelles remained with high cytotoxicity for He La cells.Moreover,confocal laser scanning microscopy(CLSM) images revealed that polymeric micelles could actively target the tumor site and the efficient intracellular DOX release from polymeric micelles toward the tumor cells further confirmed the anti-tumor effect.The DOX-loaded micelles could easily enter the cells and produce the desired pharmacological action and minimize the side effect of free DOX.These results successfully indicated that p H-responsive polymeric micelles could be potential hydrophobic drug delivery carriers for cancer targeting therapy with sustained release.     

Synthesis and characterization of biodegradable pH and reduction dual‐sensitive polymeric micelles for doxorubicin delivery

Novel pH and reduction dual‐sensitive biodegradable polymeric micelles for efficient intracellular delivery of anticancer drugs were prepared based on a block copolymer of methyloxy‐poly(ethylene glycol)‐b‐poly[(benzyl‐l ‐aspartate)‐co‐(N‐(3‐aminopropyl) imidazole‐l ‐aspartamide)] [mPEG‐SS‐P(BLA‐co‐APILA), MPBA] synthesized by a combination of ring‐opening polymerization and side‐chain reaction. The pH/reduction‐responsive behavior of MPBA was observed by both dynamic light scattering and UV–vis experiments. The polymeric micelles and DOX‐loaded micelles could be prepared simply by adjusting the pH of the polymer solution without the use of any organic solvents. The drug release study indicated that the DOX‐loaded micelles showed retarded drug release in phosphate‐buffered saline at pH 7.4 and a rapid release after exposure to weakly acidic or reductive environment. The empty micelles were nontoxic and the DOX‐loaded micelles displayed obvious anticancer activity similar to free DOX against HeLa cells. Confocal microscopy observation demonstrated that the DOX‐loaded MPBA micelles can be quickly internalized into the cells, and effectively deliver the drugs into nuclei. Thus, the pH and reduction dual‐responsive MPBA polymeric micelles are an attractive platform to achieve the fast intracellular release of anticancer drugs. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1771–1780     

Synthesis and characterization of a biodegradable amphiphilic copolymer based on branched poly(ϵ‐caprolactone) and poly(ethylene glycol)

A novel biodegradable amphiphilic copolymer with hydrophobic poly(ε‐caprolactone) branches containing cholic acid moiety and a hydrophilic poly(ethylene glycol) chain was synthesized. The copolymer was characterized by FTIR, ¹H NMR, gel permeation chromatography (GPC), differential scanning calorimetry (DSC), polarizing light microscopy (PLM), and wide‐angle X‐ray diffraction (WAXD) analysis. The amphiphilic copolymer could self‐assemble into micelles in an aqueous solution. The critical micelle concentration of the amphiphilic copolymer was determined by fluorescence spectroscopy. A nanoparticle drug delivery system with a regularly spherical shape was prepared with high encapsulation efficiency. The in vitro drug release from the drug‐loaded polymeric nanoparticles was investigated. Because of the branched structure of the hydrophobic part of the copolymer and the relatively fast degradation rate of the copolymer, an improved release behavior was observed. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5256–5265, 2007     

聚乙二醇-聚谷氨酸-聚丙氨酸三嵌段共聚物的合成及其胶束的pH-响应性药物控制释放

通过大分子引发剂ω-胺基-α-甲氧基聚乙二醇引发N-羧基-α-氨基环内酸酐开环聚合和酸性水解制备了一种具有pH-响应性的三嵌段共聚物聚乙二醇-聚谷氨酸-聚丙氨酸(mPEG-PLGA-PLAA).通过核磁共振、ζ-电势、动态光散射、电子显微镜等手段表征了此类三嵌段共聚物的自组装过程及所形成胶束的pH-响应性.使用圆二色谱和红外光谱,分析了胶束结构随环境pH值转变过程中聚氨基酸链段二级结构的变化.以阿霉素作为模型药物,研究了三嵌段共聚物的载药能力和在不同pH条件下的药物释放能力.在碱性条件下,PLGA链段去质子化,链段从疏水性变为亲水性,胶束中间层由于水合作用变得松散,药物释放速率增加;在酸性条件下,PLGA链段质子化,不带电荷,与阿霉素药物分子间的静电相互作用消失.同时,PLGA链段α-螺旋含量增加,形成由链内氢键维持的刚性棒状结构,将链段周围包埋的药物分子"挤出",加速了药物的释放.     

Co-delivery of docetaxel and doxorubicin using biodegradable PEG-PLA micelles for treatment of breast cancer with synergistic anti-tumour effects

Poly(ethylene glycol)-poly(lactic acid) copolymer, prepared by ring opening polymerization, was used as a single platform to co-deliver both hydrophilic doxorubicin and hydrophobic docetaxel (DTX) in a simulated physiological environment. The average size of the negatively charged drug loaded polymeric micelles were found to be 293 nm. The drug loading (%) and encapsulation efficiency (%) were calculated to be 1.21 and 59.0, respectively. The in vitro cytotoxicity test using MCF7 breast cancer cells was conducted using 1 × 10⁴ cells in 10% FBS and 1% antibiotic, and the absorbance of formazan was evaluated at 570 nm. Cell growth inhibition by MTT assay showed viability of 33% of the MCF7 cells after treatment with drug-loaded micelles for 48 h. Controlled release of drugs from the polymeric micelles indicated a burst release effect initially; whereas, 98% of drug could be released at pH 7.4 within a time period of 96 h. Time period for drug release shorten to 48 h only in simulated mild acidic pH (5.4) condition. The in vitro drug release study from micelles indicated synergistic cytotoxicity effect in human metastatic breast cancer MCF7 cell.     

pH‐sensitive polymeric micelles based on amphiphilic polypeptide as smart drug carriers

A series of amphiphilic diblock copolymers having poly(ethylene glycol) (PEG) as one block and a polypeptide as the other block were synthesized by ring‐opening polymerization using PEG‐amine as a macroinitiator. These polymers were characterized by ¹H‐NMR and gel permeation chromatography. The influence of the substitution ratio of tertiary amine‐containing groups on the pH sensitivity of the polymers was investigated in detail. Core/shell‐structured micelles were fabricated from these polymers using an organic solvent‐free method. pH‐ and concentration‐dependent micellization behaviors were investigated by dynamic light scattering and fluorescence microscopy. Micelles loaded with doxorubicin, selected as a model drug, showed restricted drug release at physiological pH but accelerated drug release at tumor extracellular pH. Collectively, our findings suggest that these pH‐sensitive micelles might have great potential for cancer therapy applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4175–4182     

Synthesis,self-assembly,and pH-responsive drug release of PHMEMA-PEG-PHMEMA ABA triblock copolymers

Abstract

A series of tertiary amine containing PHMEMA-PEG-PHMEMA ABA triblock copolymers were synthesized by atom transfer radical polymerization (ATRP) using bromine-capped poly(ethylene glycol) (Br-PEG-Br) and 2-(hexamethyleneimino)ethyl methacrylate (HMEMA) as macro-initiator and monomers, respectively. The chemical structures and molecular weights of triblock copolymers were characterized by ¹H NMR and gel permeation chromatography (GPC). The self-assembly behaviors of copolymers in different pH conditions were studied by dynamic light scattering (DLS) and transmission electron microscopy (TEM). Triblock copolymers self-assembled into micelles in water (pH 7.4) and the micelles disassembled at acidic pH (pH 5.0). Anticancer drug doxorubicin (DOX) was used as a drug model and physically encapsulated into polymeric micelles. The drug release of DOX-loaded polymeric micelles was pH-responsive; the drug-loaded micelles that had higher contents of tertiary amine in polymer pendant groups showed faster release speed. In addition, the drug-loaded micelles showed excellent inhibition efficacy against HeLa cells in vitro.     

Effect of pH and content of reduction-sensitive copolymer on the guest exchange kinetics of micelles

The micelles formed by reduction-sensitive amphiphilic copolymer have emerged as promising drug nanocarriers due to the controlled drug release and effective anticancer activity triggered by the reducing stimulation. However, the effect of pH on the stability and guest exchange of the micelles formed by reduction-sensitive copolymer have not been systemically investigated. Herein, the micelles formed by a reduction-sensitive copolymer poly(ε-caprolactone)-b-poly[oligo(ethylene glycol) methyl ether methacrylate] (PCL–SS–POEGA) with a single disulfide group at different pH values loaded with dyes 3,3′-dioctadecyloxacarbocyanine perchlorate/1,1′-dioctadecyl-3,3,3′,3′-tetramethylindocarbocyanine perchlorate (DiO/DiI) were prepared through the precipitation-dialysis method. In addition, mixed micelles formed by different contents of reduction-sensitive and reduction-insensitive copolymers encapsulated with DiO/DiI at pH 7.5 were also prepared by the similar approach. The effects of pH and the content of reduction-sensitive copolymer on guest exchange of these micelles were studied by the fluorescence resonance energy transfer method. Results show that the pH value in the environment has great influence on the guest exchange rate of reduction-sensitive micelles in the presence of 10 mM dithiothreitol (DTT) and slight effect on that in the absence of DTT. Under a reducing environment, the guest exchange rate of the micelles containing various contents of disulfide-linked copolymer increases with the increasing content of PCL–SS–POEGA. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1636–1644     

pH敏感型mPEG-Hz-PLA聚合物纳米载药胶束的制备

以合成的含有腙键的聚乙二醇大分子(mPEG-Hz-OH)为引发剂,以丙交酯为单体引发开环聚合反应,并通过调整投料比,制备出3种不同分子量的含腙键的生物可降解嵌段聚合物(mPEG-Hz-PLA).将腙键引入到聚合物的骨架中,以此构建聚合物胶束并作为pH敏感型纳米药物载体.制备的pH敏感型胶束的CMC值等于或低于5.46×10-4 mg/m L,DLS和TEM显示粒径均小于100 nm,且粒径分布均匀.非pH敏感型胶束在不同pH下的粒径变化不明显,而pH敏感型胶束在酸性环境下(pH=4.0和pH=5.0)胶束粒径出现了明显变化.以阿霉素为模型药物制备了pH敏感型载药胶束,其粒径比空白胶束大(100~200 nm),且粒径分布均匀.药物释放实验表明pH敏感型载药胶束随着释放介质pH降低累积释药量增高.MTT实验表明空白胶束对HeLa细胞和RAW264.7细胞几乎没有抑制作用,而载阿霉素的胶束对2种细胞的抑制作用都随着剂量的增大和时间的延长而增强.     

Preparation and characterization of N-succinyl-N'-octyl chitosan micelles as doxorubicin carriers for effective anti-tumor activity

N-Succinyl-N′-octyl chitosan (SOC) was prepared and characterized by elemental analysis, FTIR, ¹H NMR, WAXD and TG. An anticancer drug, doxorubicin (DOX), was incorporated into polymeric micelles forming by SOC in aqueous solutions. Critical micelle concentrations (CMC) of SOC were determined by fluorescence spectroscopy. The DOX-loaded SOC micelles were characterized by measurement of size and drug loading. The loading content of DOX increased with increasing drug-to-carrier ratio, and the more amount of the octyl chain, the higher the drug loading content. The average size, which was affected by the amount of octyl chain and drug loading content, was in the range of 100–200 nm. The polymeric micelles containing doxorubicin in the core region exhibited a sustained release and more cytotoxic activity against HepG2, A549, BGC and K562 than doxorubicin alone, this can be attributed to an endocytosis mechanism rather than passive diffusion.     

Multifunctional Core‐Shell‐Corona‐Type Polymeric Micelles for Anticancer Drug‐Delivery and Imaging

We have developed core‐shell‐corona‐type polymeric micelles that can integrate multiple functions in one system, including the capability of accommodating hydrophobic dyes into core and hydrophilic drug into the shell, as well as pH‐triggered drug‐release. The neutral and hydrophilic corona sterically stabilizes the multifunctional polymeric micelles in aqueous solution. The mineralization of calcium phosphate (CaP) on the PAA domain not only enhances the diagnostic efficacy of organic dyes, but also works as a diffusion barrier for the controlled release.     

Micellar Solubilization and In Vitro Release of Silymarin in the self-Aggregates of an Amphiphilic Derivative of Chitosan

Summary: The amphiphilic derivatives of chitosan, (2-hydroxyl-3-butoxyl)-propylcarboxymethyl-chitosan (HBP-CMCHS), can form micelles with the inner core of hydrophobic segments and the outer shell of hydrophilic segments. The typical poor water-soluble drug silymarin was solubilized in the HBP-CMCHS micellar by physical entrapped method. Results showed that the solubilizing capacity was enhanced by increasing the concentration of HBP-CMCHS with the same dosage of silymarin. Silymarin-loaded micellar system of HBP-CMCHS was characterized by TEM and DLS. TEM photograph revealed that the micelles were spherical and silymarin was solubilized in the cores of the spherical polymeric micelles. DLS showed that after solubilization the size of the micelles became bigger. In vitro tests showed that silymarin was slowly released from micellar solution and the release lasted up to 40 h by means of the dialysis method.     

Dual‐responsive crosslinked micelles of a multifunctional graft copolymer for drug delivery applications

A novel multifunctional amphiphilic graft copolymer has been synthesized consisting of a biodegradable poly(l ‐aspartic acid) backbone that was decorated by water‐soluble poly(ethylene glycol) (PEG) and pH‐responsive poly(N,N‐diethylaminoethyl methacrylate) (PDEAEMA) side‐chains as well as thiol pendant groups. This graft copolymer together with doxorubicin (DOX) formed micelles in water at pH = 10.0 with PDEAEMA and DOX acting as the core and PEG serving as the micellar corona. Upon oxidation, the thiol groups dimerized to form disulfide bonds, thus “locking in” the micellar structure. These crosslinked micelles expanded as the pH was decreased from 7.4 to 5.0 or upon the addition, at pH = 7.4, of glutathione (GSH), a thiol‐containing oligopeptide that is present in cancerous cells and cleaves disulfide bonds. At pH = 5.0, GSH addition triggered the disassembly of the micelles. The expansion and disassembly of the micelles have been determined via in vitro experiments to evaluate their DOX release behavior. More importantly, the graft copolymer micelles could enter cells by means of endocytosis and deliver DOX to the nuclei of ovarian cancer BEL‐7402 cells. Thus, this polymer and its micelles are promising candidates for drug delivery applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1536–1546     

PLMA‐b‐POEGMA amphiphilic block copolymers: Synthesis and self‐assembly in aqueous media

The synthesis and self‐assembly properties in aqueous solutions of novel amphiphilic block copolymers composed of one hydrophobic poly (lauryl methacrylate), (PLMA) block and one hydrophilic poly (oligo ethylene glycol methacrylate) (POEGMA) block are reported. The block copolymers were prepared by RAFT polymerization and were molecularly characterized by size exclusion chromatography, NMR and FT‐IR spectroscopy, and DSC. The PLMA‐b‐POEGMA amphiphilic block copolymers self‐assemble in nanosized complex nanostructures resembling compound micelles when inserted in aqueous media, as supported by light scattering and TEM measurements. The encapsulation and release of the model, hydrophobic, nonsteroidal anti‐inflammatory drug indomethacin in the polymeric micelles is also investigated. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 155–163