Structure and photophysical properties of porphyrin-modified metal nanoclusters with different chain lengths

Three-dimensional porphyrin-monolayer-protected gold clusters with different chain lengths (MPCs) have been prepared to examine the structure and photophysical properties, in comparison with self-assembled monolayers (SAMs) of the porphyrins on a flat gold surface. The three-dimensional porphyrin MPCs exhibit electrochemical and photophysical properties that are much closer to those of a porphyrin reference compound in solution than those of two-dimensional porphyrin SAMs on the flat gold surface. The three-dimensional architectures of porphyrin MPCs with large surface area have improved the light-harvesting efficiency relative to the corresponding porphyrin SAM on the two-dimensional flat gold surface. Time-resolved single photon counting fluorescence and transient absorption spectroscopic studies have demonstrated that undesirable quenching of the porphyrin excited singlet state via energy transfer to the gold surface of the three-dimensional MPCs is much suppressed, as compared to the quenching of the porphyrin SAMs on the two-dimensional flat gold surface. Both the quenching rate constants of the porphyrin excited singlet state by the surfaces of bulk gold and gold nanoclusters reveal weak chain length dependence of the energy transfer quenching.     

Self-assembled monolayers (SAMs) with photo-functionalities

Self-assembled monolayers (SAMs) of alkylthiol on metals, especially on gold, with photo-functionalities, such as photo-induced electron transfer, control of photo-electrochemical properties, control of electron transfer by photoisomerization, luminescence, and photo-patterning, are reviewed.     

Preparation and functions of self‐assembled monolayers of helix peptides

Self‐assembled monolayers (SAMs) of helix peptides oriented vertically to a gold surface were prepared. Negative surface potentials of a few hundred millivolts were observed for the helix peptide SAMs when they were immobilized on gold through the N terminal of the peptides. However, positive surface potentials were generated in the helix peptide SAMs when the N terminal of the peptides was directed the opposite way. The large dipole moment of the helical peptide was thought to be the major factor for generation of the surface potential. The effect of the dipole moment on the electron transfer through the helix peptide SAMs was investigated. Photocurrent generation by photoexcitation of the N‐ethylcarbazolyl group of the peptide SAMs was accelerated by the dipole moment directed toward the gold substrate. Helical peptides were thus shown to be a suitable medium for electron transfer. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4826–4831, 2000     

多巴胺在2-氨基-5-巯基-[1,3,4]三氮唑自组装膜电极上的准可逆行为研究及分析应用

利用新合成的巯基试剂2-氨基-5-巯基-[1，3，4]三氮唑在金电极表面进行了首次自组装，用电化学法和扫描电子显徽镜对自组装膜电极进行了表征。研究了多巴胺在该自组装膜电极上的电化学行为，发现该自组装膜能有效促进多巴胺在电极与溶液之间的电子传递．表现为二电子传递的准可逆行为，电极反应速率常数为0．105cm／s。该自组装膜电极用于多巴胺注射液含量的测定，结果满意。     

Fabrication and characterization of metal-molecule-metal junctions by conducting probe atomic force microscopy

Metal-molecule-metal junctions were fabricated by contacting Au-supported alkyl or benzyl thiol self-assembled monolayers (SAMs) with an Au-coated atomic force microscope (AFM) tip. The tip-SAM microcontact is approximately 15 nm(2), meaning the junction contains approximately 75 molecules. Current-voltage (I-V) characteristics of these junctions were probed as a function of SAM thickness and load applied to the microcontact. The measurements showed: (1) the I-V traces were linear over +/-0.3 V, (2) the junction resistance increased exponentially with alkyl chain length, (3) the junction resistance decreased with increasing load and showed two distinct power law scaling regimes, (4) resistances were a factor of 10 lower for junctions based on benzyl thiol SAMs compared to hexyl thiol SAMs having the same thickness, and (5) the junctions sustained fields up to 2 x 10(7) V/cm before breakdown. I-V characteristics determined for bilayer junctions involving alkane thiol-coated tips in contact with alkane thiol SAMs on Au also showed linear I-Vs over +/-0.3 V and the same exponential dependence on thickness. The I-V behavior and the exponential dependence of resistance on alkyl chain length are consistent with coherent, nonresonant electron tunneling across the SAM. The calculated conductance decay constant (beta) is 1.2 per methylene unit ( approximately 1.1 A(-)(1)) for both monolayer and bilayer junctions, in keeping with previous scanning tunneling microscope and electrochemical measurements of electron transfer through SAMs. These measurements show that conducting probe-AFM is a reliable method for fundamental studies of electron transfer through small numbers of molecules. The ability to vary the load on the microcontact is a unique characteristic of these junctions and opens opportunities for exploring electron transfer as a function of molecular deformation.     

Long-range electron transfer over 4 nm governed by an inelastic hopping mechanism in self-assembled monolayers of helical peptides

Well-ordered self-assembled monolayers (SAMs) were prepared on gold from helical peptides carrying a ferrocene (Fc) moiety at the N- or C-terminal end, and long-range electron transfer (ET) from Fc to gold was investigated. Electrochemical studies revealed that an inelastic hopping mechanism dominated over the superexchange mechanism in the ET reactions in the present SAMs and the dipole moment of the helix accelerated the ET reactions probably due to the lowering of the barrier height between the gold surface and peptide layer.     

Scanning electrochemical microscopy. 59. Effect of defects and structure on electron transfer through self-assembled monolayers

Electron transfer (ET) rate kinetics through n-alkanethiol self-assembled monolayers (SAMs) of alkanethiols of different chain lengths [Me(CH2)nSH; n=8, 10, 11, 15] on Au and Hg surfaces and ferrocene (Fc)-terminated SAMs (poly-norbornylogous and HS(CH2)12CONHCH2Fc) on Au were studied using cyclic voltammetry and scanning electrochemical microscopy (SECM). The SECM results allow determination of the ET kinetics of solution-phase Ru(NH3)63+/2+ through the alkanethiol SAMs on Au and Hg. A model using the potential dependence of the measured rate constants is proposed to compensate for the pinhole contribution. Extrapolated values of koML for Ru(NH3)63+/2+ using the model follow the expected exponential decay (beta is 0.9) for different chain lengths. For a Fc-terminated poly-norbornyl SAM, the standard rate constant of direct tunneling (ko is 189+/-31 s(-1)) is in the same order as the ko value of HS(CH2)12CONHCH2Fc. In blocking and Fc SAMs, the rates of ET are demonstrated to follow Butler-Volmer kinetics with transfer coefficients alpha of 0.5. Lower values of alpha are treated as a result of the pinhole contribution. The normalized rates of ET are 3 orders of magnitude higher for Fc-terminated than for blocking monolayers. Scanning electron microscopy imaging of Pd nanoparticles electrochemically deposited in pinholes of blocking SAMs was used to confirm the presence of pinholes.     

Synthesis and surface structure of thymine-functionalized, self-assembled monolayer-protected gold nanoparticles

Thymine-functionalized SAM-protected gold nanoparticles with diameters of 2.2 +/- 0.3 nm and 7.0 +/- 1.0 nm were prepared via a modified two-phase transfer method. UV-vis spectra showed that particle size and solvent type, as well as surface charge, influenced the gold surface plasmon band absorption, along with the interaction between thymine terminal groups in the solution. Although the bulky thymine end groups interacted strongly on the particle surface, a well-ordered monolayer of thyminethiol derivatives with a long hydrocarbon chain was formed on the particle surface, exhibiting an ordered, all-trans conformation of the methylene backbone, similar to those of corresponding self-assembled monolayers (SAMs) generated from normal alkanethiols. A larger particle size and a longer reaction time facilitated the formation of more ordered thymine-terminated thiol SAMs. Thermal analysis indicated that reorientation of the SAMs during heat treatment occurred by two processes, caused possibly by the separate recrystallization of the hydrocarbon long chains and thymine units. More ordered SAMs with a higher thermal stability were formed on the larger particle surfaces when compared with those on the smaller ones. A greater density of molecular packing was found on the smaller particle surfaces. However, SAMs formed on the larger gold particles resembled 2D SAMs on the smooth, flat gold surfaces. XPS results confirmed the thymine structure as well as the chemical bond between gold and sulfur. One type of adsorbed sulfur species was observed for the smaller particles and two for the larger ones, but a slightly higher binding energy of thiolate was found for the smaller ones.     

Heterogeneous electron transfer processes in self-assembled monolayers of amine terminated conjugated molecular wires

A versatile synthesis of triarylamine and phenothiazine end-capped oligo(phenyleneacetylene) molecular wires which are terminated by thiol functions is described. The repetitive synthesis allows the preparation of molecular wires with different chain length and different substituents attached to the wire backbone. These molecular wires were used to form dense self-assembled monolayers (SAM) on gold substrates as proved by cyclic voltammetry and quartz crystal microbalance measurements. The heterogeneous electron transfer rate constant of these SAMs was measured by impedance spectroscopy between 1 MHz and 0.1 Hz. The rate constants are somewhat larger for the triarylamine terminated systems than for the phenothiazine compound, due to the higher reorganization energy in the latter. While the molecular wires with electron withdrawing substituents display an electron transfer which is slow enough to be measurable with our impedance setup, we were unable to determine the rate of molecular wires with electron donating substituents.     

Enhanced stability of short- and long-chain diselenide self-assembled monolayers on gold probed by electrochemistry, spectroscopy, and microscopy

Well-ordered, compact, self-assembled monolayers (SAMs) of hexyl and dodecyl diselenides have been formed on oriented (111) gold surfaces. Monolayer formation has been effected by adsorption from neat diselenides as well as millimolar solutions of diselenides in alcohol. The monolayer formation is confirmed using electrochemical quartz crystal microbalance studies. The stability and permeability of the monolayers at various temperatures have been probed using reflection absorption infrared spectroscopy (RAIRS) and electrochemistry. The RAIRS studies in the dry state show the formation of highly ordered, compact structures when adsorbed from neat compounds compared to the monolayers adsorbed in the presence of alcohol. The monolayers adsorbed from neat diselenide are quite stable as a function of temperature irrespective of the chain length. The electrochemical studies based on the blocking behavior of the monolayers toward electron transfer between a diffusing species and the electrode surface reflect the stability and the compactness of the structure. The results point out that the presence of solvent molecules during the SAM formation hinders the organization of the monolayer structure, especially in the case of short-chain diselenide monolayers.     

若干多氮硒杂环化合物在金表面的自组装及其电化学性质

研究了1,2,5-硒二唑并[3,4-b]吡啶（SPb）,1,2,5-硒二唑并[3,4-d]嘧啶-7-（5H,6H）酮（SPO）,1,2,5．硒二唑并[3,4．d]嘧啶-5,7-（4H,6H）二酮（SPDO）等多氮硒杂环化合物在溶液中及其在金表面的自组装单分子膜的电化学性质。以Fe（CN）6^3-/4-为离子探针,利用CV法观察了Fe（CN）6^3-/4-氧化还原峰的变化。结果表明,在溶液中,电极过程主受吸附控制;自组装膜的电化学信号与其溶液相似,在-600mV左右都有一还原峰,表明该类化合物有相似的组装模式,其中SPO和SPDO在金表面形成了致密的单分子膜,有效地封闭了表面与溶液之间的电子交换和传递。     

四氯苯醌自组装膜电子传递机制的研究

2,3,5,6-Tetrachloride-quinone was anchored to a gold surface through the self-assembled monolayers of dithiol [DT HS-(CH2)n-SH n=2,4,6,8,10]. The surface coverage of the anchored TQ was esteminated to be 4.9 ×10-11 mol•cm-2. The electron transfer rate constant Ket associated with the redox process of anchored film decreased from 6.75 s-1 at n=2 to 0.169 s-1 at n=10 with increasing the chain length of the DT SAMs througth the redox potential of TQ. The turning barrier coefficient(β) of the electron transfer was estimated to be 0.82Å-1 from the observed linear relationship between the Ket and the monolayer chain length.     

硒杂环化合物(4,5-苯并苤硒脑)在金表面上的自组装

为了寻求新的自组装单分子膜体系,构建新的功能膜,研究了具备平面型的大环共轭硒杂环化合物-- 4,5-苯并苤硒脑(苯并[c]硒二唑,简称苤硒脑)在金表面的自组装单分子膜.通过X射线光电子能谱(XPS)和电化学手段对其进行表征.XPS研究结果表明,自组装形成单分子膜后,苤硒脑分子中Se3d结合能从57.4 eV下降到57.1 eV;表明硒杂环化合物是通过金硒键固定在金表面上的;电化学循环伏安法实验表明,金电极表面上自组装该有机硒后, Fe(CN)63-/4-的氧化还原峰几乎完全消失;以四硼酸钠为底液,测得该化合物自组装在金表面上时,其还原电位在-0.66 V,与在溶液中用裸金电极测得的还原峰电位基本一致.     

界面可控硫醇SAMs纳米金修饰金电极的电化学行为研究

在裸金电极上自组装不同比例的4,4’-二甲基联苯硫醇(MTP)和硫辛酸(TA)混合液,形成自组装膜(MTP+TA/Au SAMs),再修饰纳米金,制得纳米金混合巯基修饰金电极(AuNPs/MTP+TA/Au)。研究了纳米金混合巯基修饰金电极的电化学行为和阻抗行为,结果表明电极表面pH值的改变对电极表面的电子转移有重要影响。对葡萄糖传感器的制备条件、测定条件、抗干扰能力等进行了讨论,结果表明修饰电极的微结构和微环境有必要进一步研究。     

Poly(ethylene glycol) monolayer formation and stability on gold and silicon nitride substrates

Poly(ethylene glycol) (PEG) self-assembled monolayers (SAMs) are extensively used to modify substrates to prevent nonspecific protein adsorption and to increase hydrophilicity. X-ray photoelectron spectroscopy analysis, complemented by water contact angle measurements, is employed to investigate the formation and stability upon aging and heating of PEG monolayers formed on gold and silicon nitride substrates. In particular, thiolated PEG monolayers on gold, with and without the addition of an undecylic spacer chain, and PEG monolayers formed with oxysilane precursors on silicon nitride have been probed. It is found that PEG-thiol SAMs are degraded after less than two weeks of exposure to air and when heated at temperatures as low as 120 degrees C. On the contrary, PEG-silane SAMs are stable for more than two weeks, and fewer molecules are desorbed even after two months of aging, compared to those desorbed in two weeks from the PEG-thiol SAMs. A strongly bound hydration layer is found on PEG-silane SAMs aged for two months. Heating PEG-silane SAMs to temperatures as high as 160 degrees C improves the quality of the monolayer, desorbing weakly bound contaminants. The differences in stability between PEG-thiol SAMs and PEG-silane SAMs are ascribed to the different types of bonding to the surface and to the fact that the thiol-Au bond can be easily oxidized, thus causing desorption of PEG molecules from the surface.     

Facile synthesis of chlorophyll analog possessing a disulfide bond and formation of self-assembled monolayer on gold surface

A chlorophyll analog forming self-assembled monolayers (SAMs) on a gold surface was synthesized for the first time. 13(2)-(Demethoxycarbonyl)pheophorbide-a, which was converted from naturally occurring chlorophyll-a, was condensed with 2-hydroxyethyl disulfide to give a chlorin dyad linked by a disulfide bond. The chlorin analog was spontaneously immobilized on a gold substrate by soaking in an acetone solution of the dyad for 24 h. The resulting gold plate exhibited a visible absorption spectrum with about 420- and 675-nm maxima as the Soret and Qy peaks, respectively, indicating that chlorin pi-conjugates were modified on the gold substrate through Au-S bonding. Both visible absorption and fluorescence emission bands of the chlorin chromophores on the gold substrate were red-shifted compared with those of the synthesized chlorin dyad in a homogeneous acetone solution. The measured absorbance at the Soret maximum suggests that the chlorin chromophores on the gold plate were densely packed on a gold surface to form a SAM. Cathodic photocurrents were generated from SAMs of the chlorins on a gold substrate with irradiation of visible-lights above 400 nm. Photoinduced electron transfer from chlorins on the gold substrate to oxygen molecules in an electrolyte solution were attributed to the cathodic photocurrent generation.     

Supramolecular microcontact printing and dip-pen nanolithography on molecular printboards

The transfer of functional molecules onto self-assembled monolayers (SAMs) by means of soft and scanning-probe lithographic techniques-microcontact printing (muCP) and dip-pen nanolithography (DPN), respectively-and the stability of the molecular patterns during competitive rinsing conditions were examined. A series of guests with different valencies were transferred onto beta-cyclodextrin- (beta-CD-) terminated SAMs and onto reference hydroxy-terminated SAMs. Although physical contact was sufficient to generate patterns on both types of SAMs, only molecular patterns of multivalent guests transferred onto the beta-CD SAMs were stable under the rinsing conditions that caused the removal of the same guests from the reference SAMs. The formation of kinetically stable molecular patterns by supramolecular DPN with a lateral resolution of 60 nm exemplifies the use of beta-CD-terminated SAMs as molecular printboards for the selective immobilization of printboard-compatible guests on the nanometer scale through the use of specific, multivalent supramolecular interactions. Electroless deposition of copper on the printboard was shown to occur selectively on the areas patterned with dendrimer-stabilized gold nanoparticles.     

Intermolecular Interactions in Mixed Self‐Assembled Monolayers of Ferrocene

Electrochemical characterization of mixed self‐assembled monolayers (SAMs) of 6‐ferrocenyl‐1‐hexanethiol (FcH) and mercaptoundecanoic acid tyrosinamide (MUATyr) on gold is reported. Single‐component SAMs of FcH presented repulsive intermolecular interactions (vGθ_T=?1.12), while mixed SAMs of FcH/MUATyr (1 : 1) exhibited attractive interactions (vGθ_T=+0.20), with a homogeneous distribution of both components. Electrochemical kinetic determinations on mixed SAMs of FcH/MUATyr, indicated a secondary electron transfer pathway between the redox centers of both components. Higher amounts of FcH in the mixed SAMs lowered the observed rate of electron transfer of MUATyr. The oxidation of FcH caused an anodic shift of 160 mV in the voltammetric wave of MUATyr.     

金表面不同链长烷基硫醇自组装单分子膜表面电势的变化规律

从Helmholtz模型出发,对生长在金表面不同链长烷基硫醇自组装单分子膜(SAM)表面电势的变化规律进行了理论研究.利用量子化学软件Gaussian03和MOPAC,讨论了分子偶极矩、相对介电常数以及分子的倾斜角对SAM表面电势的影响.研究表明,不同链长烷基硫醇SAM中分子的倾斜角随烷基链长度的规律性变化是引起SAM表面电势变化的主要原因.从SAM形成机制出发,对金表面不同链长烷基硫醇SAM表面电势的变化规律及其成因提出了新的解释.     

Electrochemical Studies of Chemically Modified Nanometer‐Sized Electrodes

Self‐assembled monolayers (SAMs) of 4‐aminothiophenol (4‐ATP) has been successfully deposited onto nanometer‐sized gold (Au) electrodes. The cyclic voltammograms obtained on a 4‐ATP SAMs modified electrode show peaks and the peak height is proportional to the scan rate, which is similar to that on an electroactive SAMs modified macro electrode. The electrochemical behavior and mechanism of outer‐sphere electron transfer reaction on the 4‐ATP SAMs modified nanometer‐sized electrode has also been studied. The 4‐ATP SAMs modified electrode is further modified with platinum (Pt) nanoparticles. Electrochemical behaviors show that there is electrical communication between Pt nanoparticles and Au metal on the Pt nanoparticles/4‐ATP SAMs/Au electrode. However, scanning electron microscopic image shows that the Pt nanoparticles are not evenly covered the electrode.