An electrochemical study of PCl3 and POCl3 in the room temperature ionic liquid [C4mpyrr][N(Tf)2

Voltammetric studies of PCl3 and POCl3 have not been reported in the literature to date, probably due to the instability of these molecules in conventional aprotic solvents giving unstable and irreproducible results. From a previous study [Amigues et al. Chem. Commun. 2005, 1-4], it was found that ionic liquids have the ability to offer a uniquely stable solution phase environment for the study of these phosphorus compounds. Consequently, the electrochemistry of PCl3 and POCl3 has been studied by cyclic voltammetry on a gold microelectrode in the ionic liquid [C4mpyrr][N(Tf)2] (1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide). For both compounds, reduction and oxidation waves were observed and a tentative assignment of the waves is given. For PCl3, the reduction was thought to proceed via the following mechanism: PCl3 + e- <=> PCl3-, PCl3- <=> Cl- + P*Cl2, and Cl- + PCl3 <=> PCl4-. For POCl3, the suggested reduction mechanism was analogous to that of PCl3: POCl3 + e- <=> POCl3-, POCl3- <=> Cl- + P*OCl2, and Cl- + POCl3 <=> POCl4-. In both cases P*Cl2 and P*OCl2 are likely to engage in further reactions. Potential step microdisk chronoamperometry was carried out on the reductive waves of PCl3 and POCl3 to measure diffusion coefficients and number of electrons transferred. It was found that the diffusion of PCl3 was unusually slow (3.1 x 10(-12) m2 s(-1)): approximately 1 order of magnitude less than that for POCl3 (2.2 x 10(-11) m2 s(-1)). For both PCl3 and POCl3, a "split wave" was observed, with an overall electron count of 1. This observation is shown to be consistent with and to "fingerprint" the mechanisms proposed above.     

Synthesis and reactivity of perhalogenated acyclic and metallacyclic tantalum(V) phosphoraniminato complexes: discovery of an unexpected ligand coupling reaction to form the novel phosphazenium salt

The reaction of TaCl5 with a single equivalent of Cl3P=NSiMe3 resulted in the isolation of the perhalogenated (phosphoraniminato) tantalum(V) complex TaCl4(N=PCl3) (1). Reaction of 1 with an excess of THF and subsequent cooling produced crystals of TaCl4(N=PCl3)(THF) (1.THF), which possesses a distorted octahedral Ta center with a THF molecule coordinated trans to the phosphoraniminato ligand. The reaction of 1 with the aminophosphoranimine, (Me3Si)2NPCl2=NSiMe3, resulted in a [3 + 1] cyclocondensation reaction to form the metallacyclic complex, TaCl3(N=PCl3)[N(SiMe3)PCl2N(SiMe3)] (2), which contains a TaNPN four-membered ring and a phosphoraniminato ligand (N=PCl3). The analogous [3 + 1] cyclocondensation reaction between (Me3Si)2NPCl2=NSiMe3 and TaCl5 led to the isolation of TaCl4[N(SiMe3)PCl2N(SiMe3)] (3). An attempt to cleave the NPN ligand from the Ta center in 2 via protonolysis with HCl led to an unusual phosphoraniminato ligand coupling reaction to yield the novel phosphazenium salt [N(PCl2NH2)2][TaCl6] (4). All new compounds (1.THF and complexes 1-4) were characterized by single-crystal X-ray diffraction.     

2,4,5-三氧-1,3,2,4-二氮二磷杂环戊烷衍生物的合成和结构

本文报道了七个新的2,4,5-三氧-1,3,2,4-二氮二磷杂环戊烷衍生物的制备, 产物的结构经IR, ^1H和^31P NMR, MS以及元素分析证实, 并利用^31P NMR和GC-MS区分了化合物的顺式和反式异构体。     

Group 13 Lewis acid adducts of [PCl2N]3

Phosphazene polymers are classically synthesized by the high-temperature, ring-opening polymerization (ROP) of [PCl(2)N](3) to give [PCl(2)N](n), followed by functionalization of [PCl(2)N](n) with different side groups. We investigated the interactions of [PCl(2)N](3) with Lewis acids because Lewis acids have been used to induce the high-temperature ROP of [PCl(2)N](3). The reactions of [PCl(2)N](3) with MX(3) (M = group 13, X = halides), under strict anaerobic conditions gave adducts [PCl(2)N](3)·MX(3). Adducts were characterized by X-ray crystallography and multinuclear and variable-temperature NMR studies, and mechanistic understanding of their fluxional behavior in solution was achieved. The properties of the [PCl(2)N](3)·MX(3) adducts at or near room temperature strongly suggests that such adducts are not involved directly as intermediates in the high-temperature ROP of [PCl(2)N](3).     

Synthesis of halogenated polyhedral phosphaboranes. Crystal structure of closo-1,7-P2B10Cl10

The 12-vertex closo-phosphaborane 1,7-P2B10Cl10 (1) has been prepared in low yield from the pyrolysis reaction of B2Cl4 with PCl3 at temperatures above 400 degrees C. A single-crystal X-ray structure determination of 1 (monoclinic space group P2(1)/n with a = 9.239(2) A, b = 16.786(3) A, c = 15.739(3) a, beta = 93.25(3) degrees, and Z = 4) confirmed that, consistent with its 26 skeletal electron count, the phosphaborane adopts a distorted icosahedral structure with the phosphorus atoms in the 1,7-positions. Crystals of 1 contain toluene in a 1:1 molar ratio embedded between each P atom of neighboring cluster molecules. Alteration of the pyrolytic conditions resulted in the formation of the phosphaboranes P4B8Cl6 (2) and P2B8Cl8 (3), which were characterized spectroscopically. Copyrolysis of B2Cl4 with a mixture of PCl3 and AsCl3 at 450 degrees C generated the six-vertex arsaphosphaborane AsPB4Cl4 (4) and traces of the icosahedral arsaphosphaborane AsPB10Cl10. These compounds are examples of heteroboranes which contain two different group-15 atoms within a single molecule.     

1, 3-双磷(膦)酰基丙烯类化合物的^1H、^3^1P NMR研究

本文报道了标题类化合物中十个化合物的^1H和^3^1PNMR的研究结果。其中分别运用了2DJ分解谱以及异核COSY谱等多种技术,解析了它们的^1H和^3^1P图谱,从而证实了合成反应的区域选择性和立体选择性。文章中,讨论了手性中心或其它因素而表现出的不等性;讨论了影响δ~P和J~p~H数值的各种因素:还报道了比较少见的^3^1P-^3^1P之间的远程偶合。其中,顺式产物的^4J~P~P数值(约9Hz)大于反式产物的^4J~P~P(约7Hz)。     

A study of the quenching of PCl(b1∑+) by the E-V model

Using the reaction of Ar(3Po,2) + PCl3 as a source of PCl(b1 +), we have measured the quenching rate constants of PCl(b,v'=0) for more than 20 quenchers. The E-V model is used to calculate the rate constants. The comparison of the calculated values with the experimental ones shows that the quenching of PCl(b) by the reagent molecules results from the electronic to vi-brational energy near resonance transfer and has been related to the Franck-Condon factors for the PCl(b,v'=0-a,v"=m) transition and to the anharmonicities of the terminal bonds of the quenchers. In addition, the influence of the polarizability of the reagent molecule on the quenching rate constant is discussed.     

Synthesis,Properties, Structure and Reactivity of Sodium 2,3,4,5-Tetra- tert -butylcyclopentaphosphanide

The reaction between Na, t BuPCl 2 , and PCl 3 in thf gives Na[ cyclo -( t Bu 4 P 5 )] ( 1 ). 1 reacts with PCl 3 to yield ( cyclo - t Bu 3 P 4 ) t BuPCl ( 2 ), and with a proton source, such as HCl, NH 4 Cl, or t BuCl, to give cyclo - t Bu 4 P 5 H ( 3 ). The reaction of 1 with [MCl 2 (PRR' 2 ) 2 ] (M = Ni; R = R' = Et; M = Pd, Pt, R = Ph, R' = Me) gives [Ni{ cyclo -( t Bu 3 P 5 )}(PEt 3 ) 2 ] ( 4 ), [Pd{ cyclo -( t Bu 4 P 5 )} 2 ] ( 5 ), and [PtCl{ cyclo -( t Bu 3 P 4 ) t BuP}(PPhMe 2 )] ( 6 ). 1-6 were characterized by 31 P{ 1 H} NMR spectroscopy, and 1 and 4-6 were also characterized by X-ray crystallography.     

Phosphine-mediated dehalogenation reactions of trichloro(N-silyl)phosphoranimines

The reaction of N-(trimethylsilyl)phosphoranimine Cl3P=NSiMe3 (1) with nBu3P or Ph3P yields the N-(dichlorophosphino)phosphoranimines nBu3P=NPCl2 (4a) or Ph3P=NPCl2 (4b), respectively. Detailed studies of this reaction indicate a mechanism that involves the reductive dechlorination of 1 by the tertiary phosphine to yield nBu3PCl2 (5a) or Ph3PCl2 (5b) with the apparent formation of the transient chlorophosphinimine ClP=NSiMe3 (6), followed by condensation of 5a or 5b with 1 to form 4a or 4b and Me3SiCl. Convincing evidence for the proposed mechanism was revealed by studies of the analogous reaction between the N-(triphenylsilyl)phosphoranimine Cl3P=NSiPh3 (8) with nBu3P and Ph3P. These reactions quantitatively generated 5a and 5b and also allowed the correspondingly more stable chlorophosphinimine ClP=NSiPh3 (10) to be identified.     

利用E-V传能模型研究亚稳态分子PCl(b^1∑^+)的猝灭过程

亚稳态分子猝灭机理的研究一直受到人们的极大重视。本文利用E-V传能模型对亚稳态分子PCl(b^1∑^+)的猝灭过程进行了定量处理。结果表明PCl(b^1∑^+)的猝灭是PCl(b^1∑^+→a^1Δ)跃迁和试剂分子端键X-Y振动能级近共振传能的结果, 与PCl(b^1∑^+→a^1Δ)跃迁的Franck-Condon因子及试剂分子端键X-Y振动的非谐性系数有关, 而且也受猝灭试剂分子极化率的影响。     

(Ph)3PBr][Br7], [(Bz)(Ph)3P]2[Br8], [(n-Bu)3MeN]2[Br20], [C4MPyr]2[Br20], and [(Ph)3PCl]2[Cl2I14]: extending the horizon of polyhalides via synthesis in ionic liquids

The five polyhalides [(Ph)(3)PBr][Br(7)], [(Bz)(Ph)(3)P](2)[Br(8)], [(n-Bu)(3)MeN](2)[Br(20)], [C(4)MPyr](2)[Br(20)] ([C(4)MPyr] = N-butyl-N-methylpyrrolidinium), and [(Ph)(3)PCl](2)[Cl(2)I(14)] were prepared by the reaction of dibromine and iodine monochloride in ionic liquids. The compounds [(Ph)(3)PBr][Br(7)] and [(Bz)(Ph)(3)P](2)[Br(8)] contain discrete pyramidal [Br(7)](-) and Z-shaped [Br(8)](2-) polybromide anions. [(n-Bu)(3)MeN](2)[Br(20)] and [C(4)MPyr](2)[Br(20)] exhibit new infinite two- and three-dimensional polybromide networks and contain the highest percentage of dibromine ever observed in a compound. [(Ph)(3)PCl](2)[Cl(2)I(14)] also consists of a three-dimensional network and is the first example of an infinite polyiodine chloride. All compounds were obtained from ionic liquids as the solvent that, on the one hand, guarantees for a high stability against strongly oxidizing Br(2) and ICl and that, on the other hand, reduces the high volatility of the molecular halogens.     

Darstellung und Eigenschaften von Tris(diphenylamino)-phosphin

Preparation and Properties of Tris (diphenylamino) Phosphine The synthesis and some properties of tris(diphenylamino)phosphine are described. Displacement of the chlorine atom is readily achieved by reaction of (Ph₂N)₂PCl with Ph₂NSime₃. Thus tris(diarylamino)phosphine (Ph₂N)₃P is obtained almost in quantitativ yield. The aminolysis reaction of PCl₃ or (Ph₂N)₂PCl with Ph₂NH gives also (Ph₂N)₃P. The properties and structure of the phosphine on basis of spectroscopical and X-ray investigations are discussed.     

Phosphorus(III) cations supported by a PNP pincer ligand and sub-stoichiometric generation of P4 from thermolysis of a nickel insertion product

Neutral, mono-, and dicationic phosphorus(III) compounds are accessible with a supporting PNP pincer ligand (PNP = [4-Me-2-iPr(2)P-C(6)H(3))(2)N]). Reaction of (PNP)H with PCl(3) and nBu(3)N furnished (PNP)PCl(2) (1), which displays a highly temperature-dependent structure in solution. Synthesis and characterization by NMR spectroscopy and X-ray crystallography of Cl/Br-scrambled derivatives, a monocationic derivative [(PNP)PCl][HCB(11)H(11)] (4), and the dicationic derivatives [(PNP)P][OTf](2) (5), [(PNP)P][B(C(6)F(5))(4)](2) (6), [(PNP)P][B(12)Cl(12)] (7) established that 1 not only undergoes several fluxional processes in solution but also possesses a temperature-dependent ground state structure. Reaction of 1 with a Ni(0) source initially leads to a phosphine-phosphinidene complex, followed by thermal generation of P(4).     

Reaction of m-terphenyldichlorophosphanes with sodium azide: synthesis and characterization of stable azidocyclophosphazenes

Reaction of the m-terphenyldichlorophosphanes 2,6-(2-MeC(6)H(4))(2)C(6)H(3)PCl(2) (1), 2,6-(4-t-BuC(6)H(4))(2)C(6)H(3)PCl(2) (2), or 2,6-Mes(2)C(6)H(3)PCl(2) (3) with excess NaN(3) in acetonitrile at room temperature afforded the corresponding bisazidophosphanes 2,6-(2-MeC(6)H(4))(2)C(6)H(3)P(N(3))(2), 2,6-(4-t-BuC(6)H(4))(2)C(6)H(3)P(N(3))(2) (5), or 2,6-Mes(2)C(6)H(3)P(N(3))(2) (6) (Mes = 2,4,6-Me(3)C(6)H(2)), respectively. These compounds are thermally labile and decompose into a number of azidophosphazenes. The azidocyclophosphazenes [NP(N(3))(C(6)H(3)(4-t-BuC(6)H(4))(2)-2,6)](3) (4) and [NP(N(3))C(6)H(3)Mes(2)-2,6](2) (8) have been isolated from these mixtures. All compounds were characterized by (1)H, (13)C, (31)P NMR and IR spectroscopy. Crystal structures of 2, 4, and 8 were determined.     

Preference for a C3 conformation in tris-dimethylaminophosphonium cations: a comparison of the reactions of (Me2N)3P with I-X (X = Cl, Br, I, CN)

Tris-(dimethylamino)phosphine reacts with I(2) to form (Me(2)N)(3)PI(2), which when recrystallised from acetonitrile displays a structure of overall stoichiometry [{(Me(2)N)(3)PI}I](6).CH(3)CN . The asymmetric unit of consists of four different [(Me(2)N)(3)PI](+) cations, one of these exhibits a cation-anion interaction to an iodide ion, with an I-I contact distance of 3.6378(14) A, the longest yet observed for an R(3)PI(2) compound. Two of the other three cations display no interactions, whilst a cation-solvent interaction is observed for the fourth. When (Me(2)N)(3)PI(2) is recrystallised from dichloromethane the molecule abstracts chlorine from the solvent to form [(Me(2)N)(3)PCl]I this latter compound can also be synthesised directly from (Me(2)N)(3)P and ICl. The reaction of (Me(2)N)(3)P with IBr forms [(Me(2)N)(3)PBr]I, which when recrystallised from chlorinated solvents forms [(Me(2)N)(3)PCl(0.5)Br(0.5)]I. The analogous [(Me(2)N)(3)PCN]I, does not display CN-Cl exchange and can be recrystallised from dichloromethane. The structures of and have all been determined by X-ray diffraction. All of the (Me(2)N)(3)P groups in the cations in, and exhibit a C(3) conformation, in contrast to the majority of (R(2)N)(3)P systems where a C(s) conformation is usually preferred. This C(3) conformation appears to be favoured where there is increased positive charge on phosphorus, as is the case in the phosphorus(v) ionic species described herein. This conformation allows greater P-N pi-bonding, and as a result the P-N bonds are shortened, varying between 1.566(10) and 1.624(10) A in these compounds.     

Synthesis and characterization of β-diketiminate germanium(II) compounds

Reactions of LGeCl (L = CH[C(Me)N(Ar)](2); Ar = 2,6-iPr(2)C(6)H(3)) with KOtBu or LiR (R = 2-thienyl, N(H)Ar, PPh(2)) yielded the germanium(II) compounds LGeR [R = OtBu (1), 2-thienyl (2), N(H)Ar (3), PPh(2) (4)]. The reduction of (2-thienyl)(2)PCl with lithium afforded the diphosphane [(2-thienyl)(2)P](2) (5). The treatment of (2-thienyl)(2)PCl with LiAlH(4) or KHBtBu(3) led to the formation of (2-thienyl)(2)PH (6). The NHC-assisted reaction of LGeCl and 6 resulted in the isolation of LGeP(2-thienyl)(2) (7). This is the first example where NHC is used for eliminating HCl from compounds with P-H and Ge-Cl bonds. All solid products were characterized by elemental analysis, NMR and IR spectroscopy, and single-crystal X-ray structure determination.     

Sterically encumbered acyclic diphosphazanes: synthesis, conformations and coordination behavior

The reaction between lambda3-diphosphazane [EtN(PCl2)2] and the sodium salts of substituted phenols affords sterically encumbered diphosphazanes [EtN{P(OR)2}2] (R = -C6H3iPr2-2,6 (1), -C6H3Me2-2,6 (2) and -C6H2Me3-2,4,6 (3)). When the same reaction was carried out with bulky sodium 2,4-di-tert-butyl-4-methylphenoxide, only a monosubstitution takes place to result in the formation of [EtN{PCl(OR)}2] (R = -C6H2tBu2-2,6-Me-4) (4). Further reaction of 2 with [Mo(CO)4(NBD)] produces cis-[(EtN{P(OC6H3Me2-2,6)2}2)Mo(CO)4] (5). Diphosphazanes 1-4 and the metal derivative 5 have been characterized by means of their analytical data and EI-MS, IR and multinuclear NMR (1H and 31P) spectral data. The solid-state structure of the diphosphazanes 1, 2 and 4, and the molybdenum complex 5 have been determined by X-ray diffraction studies. Irrespective of the size of substituent, the bulky groups on the phosphorus and nitrogen are on the same side of the P-N-P skeleton with a local C2v symmetry. The central nitrogen remains almost trigonal planar in all the compounds.     

Dimers and Trimers of Diphosphenes: A Wealth of Cyclo‐Phosphanes

Various new P‐based ring systems were synthesised by transferring established reaction routes from NP chemistry to the analogous PP compounds. Due to the different electronic situations of phosphorus and nitrogen with respect to s and p character of the lone pair, different reactivity of the phosphorus compounds was observed, especially with regard to the specificity of the reactions and the stability of the products. Whereas Mes*N?PCl (Mes*=2,4,6‐tri‐tert‐butylphenyl) is stable in the solid state and in solution, the formal phosphorus congener Mes*P?PCl is highly reactive and could not be observed. Instead, several formal dimers and trimers of Mes*P?PCl could be isolated, which constitute an intriguing variety of three‐ and four‐membered ring systems.     

Interaction of PH3 with acetaldehyde in aqueous media and chemistry of [HO(Me)CH]4PCl

The known phosphonium chloride [HO(Me)CH]₄PCl was prepared at ambient conditions from PH₃ and acetaldehyde in aqueous HCl, and characterized by elemental analysis and ¹H and ³¹{¹H} NMR spectroscopy. Attempts to obtain the tertiary phosphine [HO(Me)CH]₃P via reaction of [HO(Me)CH]₄PCl with Na₂SO₃ or Et₃N in aqueous media under Ar revealed that [HO(Me)CH]₃P is unstable and equilibrates with the secondary phosphine [HO(Me)CH]₂PH and acetaldehyde. A 1:4 reaction of [HO(Me)CH]₄PCl with NaHSO₃ at room temperature under Ar affords first the oxide [HO(Me)CH]₂P(O)H and then the phosphinic acid [HO(Me)CH]₂P(O)OH. A 1:1 reaction of [HO(Me)CH]₄PCl with Na₂S₂O₃ affords the sulfide [HO(Me)CH]₃PS. ³¹{¹H} and ¹H NMR data for all the (α-hydroxyethyl)phosphorus species are reported for the first time.     

2-(1H-1,2,4-三唑-1-基)-4,4-二甲基-1-烃硫基-3-戊酮的合成及波谱性质

由 2 - (1H - 1 ,2 ,4-三唑 - 1 -基 ) - 4 ,4-二甲基 - 1 -戊烯 - 3 -酮和硫酚 (醇 )亲核加成反应合成了五个未见文献报道的目标化合物 ,其化学结构经IR、1 HNMR、MS和元素分析确证并研究其波谱性质