CF3 oxonium salts, O-(trifluoromethyl)dibenzofuranium salts: in situ synthesis, properties, and application as a real CF3+ species reagent

We report in situ synthesis of the first CF(3) oxonium salts, thermally unstable O-(trifluoromethyl)dibenzofuranium salts, which furthermore have different counteranions (BF(4)-, PF(6)-, SbF(6)-, and Sb(2)F(11)-) and ring substituents (tert-butyl, F, and OCH(3)), by photochemical decomposition of the corresponding 2-(trifluoromethoxy)biphenylyl-2'-diazonium salts at -90 to -100 degrees C. The yields markedly increased in the order of BF(4)- < PF(6)- < SbF(6)- < Sb(2)F(11)-. The CF(3) oxonium salts were fully assigned by means of (1)H and (19)F NMR spectroscopy at low temperature. The CF(3) salts decomposed to form CF(4) and dibenzofurans. The half-life times at -60 degrees C of the 2-tert-butyl salts having different counteranions were 29 min for BF(4)- salt 2d, 36 min for PF(6)- salt 2c, 270 min for SbF(6)- salt 2a, and 415 min for Sb(2)F(11)- salt 2b. Those at -60 degrees C of the Sb(2)F(11)- salts having different 2-substituents were 13 min for F salt 3b, 63 min for H (unsubstituted) salt 1b, and 415 min for tert-butyl salt 2b. Thus, the stability of the CF(3) oxonium salts increased in the order of BF(4)- < PF(6)- < SbF(6)- < Sb(2)F(11)- and F < H < tert-butyl, which is in accord with the increasing orders of the non-nucleophilicity of counteranions and the electron-donating effect of ring substituents. 2-tert-Butyl-O-(trifluoromethyl)dibenzofuranium hexafluoroantimonate (2a) was thus chosen and successfully applied as a real CF(3)+ species source to the direct O- and N-trifluoromethylations of alcohols, phenols, amines, anilines, and pyridines under very mild conditions. The thermal decomposition method with a mixture of diazonium salt 17a and aryl- or alkylsulfonic acids, pyridine, or pyridines having an electron-withdrawing group also afforded CF(3)O or CF(3)N products. The trifluoromethylation mechanism is discussed and an S(N)2 mechanism containing the transient formation of free CF(3)+ is proposed. Thus, the present study has demonstrated that the exceedingly reactive CF(3)+ species can be generated much easier than the CH(3)+ species, contrary to the common sense that CF(3)+ is extremely difficult to generate in solution.     

Observation of inductive effects that cause a change in the rate-determining step for the conversion of rhenium azides to imido complexes

The cationic oxorhenium(V) complex [Re(O)(hoz)(2)(CH(3)CN)][B(C(6)F(5))(4)] [1; Hhoz = 2-(2'-hydroxyphenyl)-2-oxazoline] reacts with aryl azides (N(3)Ar) to give cationic cis-rhenium(VII) oxoimido complexes of the general formula [Re(O)(NAr)(hoz)(2)][B(C(6)F(5))(4)] [2a-2f; Ar = 4-methoxyphenyl, 4-methylphenyl, phenyl, 3-methoxyphenyl, 4-chlorophenyl, and 4-(trifluoromethyl)phenyl]. The kinetics of formation of 2 in CH(3)CN are first-order in both azide (N(3)Ar) and oxorhenium(V) complex 1, with second-order rate constants ranging from 3.5 × 10(-2) to 1.7 × 10(-1) M(-1) s(-1). A strong inductive effect is observed for electron-withdrawing substituents, leading to a negative Hammett reaction constant ρ = -1.3. However, electron-donating substituents on phenyl azide deviate significantly from this trend. Enthalpic barriers (ΔH(?)) determined by the Eyring-Polanyi equation are in the range 14-19 kcal mol(-1) for all aryl azides studied. However, electron-donating 4-methoxyphenyl azide exhibits a large negative entropy of activation, ΔS(?) = -21 cal mol(-1) K(-1), which is in sharp contrast to the near zero ΔS(?) observed for phenyl azide and 4-(trifluoromethyl)phenyl azide. The Hammett linear free-energy relationship and the activation parameters support a change in the mechanism between electron-withdrawing and electron-donating aryl azides. Density functional theory predicts that the aryl azides coordinate via N(α) and extrude N(2) directly. For the electron-withdrawing substituents, N(2) extrusion is rate-determining, while for the electron-donating substituents, the rate-determining step becomes the initial attack of the azide. The barriers for these two steps are inverted in their order with respect to the Hammett σ values; thus, the Hammett plot appears with a break in its slope.     

Structure of a fluorinated azoxy compound: fluoro(trifluoromethyl)-diazene-2-oxide,CF3N(O)NF

A gas-phase electron diffraction study of the azoxy compound which was synthesized by the reaction of CF3NO with N2F4 in a Pyrex glass vessel results in a trans CF3N(O)NF structure (F trans to CF3), although quantum chemical calculations (MP2 and B3LYP) predict a greater stability of the cis CF3NN(O)F isomer by about 12 kcal/mol. The CF3 group eclipses the N=N double bond. The following skeletal geometric parameters (r(a) values with 3sigma uncertainties) were obtained: N=N 1.287(15) A; N=O 1.231(6) A; N-F 1.380(6) A; N-C 1.498(6) A; N=N=O 131.2(13) degrees; N=N-F 103.5(13) degrees; N=N-C 114.0(12) degrees. The bond lengths in CF3N(O)NF are compared to those in azo, nitryl, and nitrosyl compounds with fluorine and/or CF3 substituents.     

Toward pi-conjugated molecule bundles: synthesis of a series of B,B',B''-trianthryl-N,N',N''-triarylborazines and the bundle effects on their properties

As a prototype of a pi-conjugated molecule bundled system, a series of B,B',B'-trianthryl- N,N',N'-triarylborazine derivatives bearing various p-substituted phenyl groups (p-R-C(6)H(4): R = hexyl (1), i-Pr (2), CF(3) (3), Br (5)) as aryl groups was designed and synthesized. The crystal structure analysis of these derivatives confirmed that the three anthryl and three phenyl groups are bundled up alternately in a C(3) symmetrical gear-shaped fashion. On the basis of this structure, the trianthrylborazine derivatives form a unique honeycomblike packing structure consisting of intermolecular pi-stacking of the anthryl moieties. Significant bundle effects were observed in the photophysical and electrochemical properties of these compounds. In their fluorescence spectra, the trianthrylborazine derivatives (1-3) show intense emissions around 390 nm, whose quantum yields (1, Phi(F) = 0.62; 2, Phi(F) = 0.59; 3, Phi(F) = 0.63) are about twice high as that of anthracene (Phi(F) = 0.27). The cyclic voltammetry measurements show that the oxidation peak potential can be tuned by varying the substituents on the phenyl moieties. Theoretical calculations (B3LYP/ 6-31G(d)) suggested that secondary through-bond/through-space interactions in the bundled structure play an important role in the tuning of these properties. Facile structural derivatization at the 10-position of the anthryl moieties of trianthrylborazine was conducted to demonstrate the utility of the borazine skeleton as a core framework for new organic electronic materials.     

Variable-temperature 19F NMR and theoretical study of 1,9- and 1,7-C60F(CF3) and C(s-) and C1-C60F17(CF3): hindered CF3 rotation and through-space J(FF) coupling

Milligram amounts of the new compounds 1,9- and 1,7-C60F(CF3) (ca. 85:15 mixture of isomers) and C60F3(CF3) were isolated from a high-temperature C60/K2PtF6 reaction mixture and purified to 98 mol % compositional purity by two-dimensional high-performance liquid chromatography using Buckyprep and Buckyclutcher columns. The previously observed compounds C60F5(CF3) and C60F7(CF3) were also purified to 90+ mol % for the first time. Variable-temperature 19F NMR spectra of the mixture of C60F(CF3) isomers and the previously reported mixture of C(s)- and C1-C60F17(CF3) isomers demonstrate for the first time that fullerene(F)n(CF3)m derivatives with adjacent F and CF3 substituents exhibit slow-exchange limit hindered CF3 rotation spectra at -40 +/- 10 degrees C. The experimental and density functional theory (DFT) predicted deltaH++ values for CF3 rotation in 1,9-C60F(CF3) are 46.8(7) and 46 kJ mol(-1), respectively. The DFT-predicted deltaH++ values for 1,7-C60F(CF3), C(s)-C60F17(CF3), and C1-C60F17(CF3) are 20, 44, and 54 kJ mol(-1), respectively. The (> or = 4)J(FF) values from the slow-exchange-limit 19F spectra, which vary from ca. 0 to 48(1) Hz, show that the dominant nuclear spin-spin coupling mechanism is through-space coupling (i.e., direct overlap of fluorine atom lone-pair orbitals) rather than coupling through the sigma-bond framework. The 2J(FF) values within the CF3 groups vary from 107(1) to 126(1) Hz. Collectively, the NMR data provide an unambiguous set of (> or = 4)J(FF) values for three different compounds that can be correlated with DFT-predicted or X-ray diffraction derived distances and angles and an unambiguous set of 2J(FF) values that can serve as an internal standard for all future J(FF) calculations.     

Equilibria of the 5-substituted-1,2-acylated tetrazoles and imidoyl azides

Equilibrium of acylated-5-alkyloxy (aryloxy) tetrazoles and acylated-imidoyl azides was measured by (1)H NMR and/or IR spectroscopy. In nonpolar solvents the relatively weakly electron-withdrawing acyl group (CO(2)CH(3)) favored acylation at the 2-position of the 5-substituted tetrazoles. Moderately electron-withdrawing groups (CO(2)CH(2)CCl(3), CO(2)CCl(3)) move the equilibrium to the side of 1-acyl-5-substituted tetrazole. Strong electron-withdrawing groups (CN, SO(2)CH(3), SO(2)CF(3)) favored the formation of the azide. The rate of isomerization of tetrazoles and the azide increases at higher concentrations and polarity of the solvent. In solid phase or in the nonpolar solvent (diethyl ether), only one of the three isomers is present, its structure depending on the nature of the substituents at the 1 or 2 positions of tetrazoles.     

Syntheses and experimental studies on the relative stabilities of spiro, ansa, and bridged derivatives of cyclic tetrameric fluorophosphazene

Reactions of (CF2CH2OSiMe3)2 and CF2(CF2CH2OSiMe3)2 with N4P4F8 (1) in a 1:2.5 molar ratio resulted in the formation of monospiro compounds [(CF2CH2O)2PN](F2PN)3 (2) and [CF2(CF2)CH2O)2PN](F2PN)3 (4) as well as the intermolecular bridged compounds F7N4P4OCH2CF2CF2CH2OP4N4)F7 (3) and F7N4P4OCH2CF2CF2CF2CH2OP4N4F7 (5). An equimolar reaction of dilithiated 1,3-propanediol with 1 resulted in the 1,3-ansa-substituted compound CH2(CH2O)2[P(F)N]2(F2PN)2 (6) as the major product in good yield. However, an analogous reaction of the dilithiated 1,3-propanedithiol with 1 gave only the spirocyclic compound CH2(CH2S)2(PN)(F2PN)3 (8). The molecular structures of 2 and 6 were determined by single-crystal X-ray diffraction. In the presence of catalytic amounts of CsF in THF, the bridged compound 3 was converted to the spirocyclic compound 2 while the 1,3-ansa compound 6 under similar conditions transformed into the monospiro-substituted compound CH2(CH2O)2 (PN)(F2PN)3 (7). These transformations were monitored by time-dependent 19F and 31P NMR studies.     

Stabilization of isolated mixed-valence trimers in a novel nickel dithiolene complex with CF2 substituents

The preparation of the novel paramagnetic nickel dithiolene complex Ni(F2pdt)2-* (F2pdt2-: 2,2-difluoro-1,3-propanediyldithioethylene-1,2-dithiolate) and its X-ray crystal structure as n-Bu4N+ salt are described. (n-Bu4N)[Ni(F2pdt)2] (2) crystallizes in the orthorhombic system, space group Pna2(1) with a = 21.379(4) A, b = 8.9702(18) A, and c = 18.527(4) A. The radical anions are isolated from each other by the bulky n-Bu4N+ cations and exhibit a Curie-type magnetic behavior. Two reversible redox waves corresponding to the redox couples Ni(F2pdt)2(2-/-*) and Ni(F2pdt)2(-*/0) are observed at -0.55 and 0.30 V vs SCE, illustrating the electron withdrawing effect of the CF2 substituents. As a consequence, (TTF)3(BF4)2 oxidation of the radical anion does not afford the neutral Ni(F2pdt)2(0) but a TTF salt formulated as [TTF](3)[Ni(F2pdt)2]3[CH2Cl2]. It crystallizes in the triclinic system, space group P1 with a = 12.330(3) A, b = 12.726(3) A, c =15.706(3) A, alpha = 91.10(3), beta = 110.78(3), and gamma = 116.01(3). Donor and acceptor moieties are organized into (TTF)3(2+) and [Ni(F2pdt)2]3(2-) trimers whose dicationic and dianionic charges have been inferred from the intramolecular bond lengths evolution and the singlet-triplet magnetic behavior. These trimers arrange orthogonally to each other into chess-board-like slabs, characterized by a segregation of the CF2 fragments and further stabilized by weak C-H.F interactions. Extended Hückel calculations show that only the nickel dithiolene complex trimer actually contributes to the magnetic susceptibility.     

Cesium hydridotris(trifluoromethyl)borate, Cs[(CF3)3BH

Treatment of Cs[(CF3)3BNH2] with the aminating agent H2NOSO3H in aqueous solution allowed the isolation of pure Cs[(CF3)3BH], which is stable up to 300 degrees C. Due to the strong electron-withdrawing effect of the CF3 substituents, the [(CF3)3BH]- anion behaves as a very unreactive hydride. It is stable in concentrated hydrochloric acid for many days but reacts cleanly with F2, Cl2, and Br2 to the corresponding haloborates. The molecular structure was determined by single-crystal X-ray diffraction. Crystal data: orthorhombic, space group Pnma; a = 11.4296(5) A, b = 7.9510(4) A, c = 9.7268(5) A; V = 883.94(7) A(3), Z = 4; R1 = 0.0294, wR2 = 0.0818. The anions exhibit only Cs symmetry in the lattice. The natural and deuterated anions were characterized by IR, Raman, and multinuclear NMR spectroscopy; vibrational assignments were supported by DFT calculations. QTAIM charges derived from the B3LYP electron density are given for [(CF3)3BH]- and several related anions.     

Distinct electronic effects on reductive eliminations of symmetrical and unsymmetrical bis-aryl platinum complexes

Symmetrical bis-aryl platinum complexes (DPPF)Pt(C(6)H(4)-4-R)(2) (R = NMe(2), OMe, CH(3), H, Cl, CF(3)) and electronically unsymmetrical bis-aryl platinum complexes (DPPF)Pt(C(6)H(4)-4-R)(C(6)H(4)-4-X) (R = CH(3), X = NMe(2), OMe, H, Cl, F, CF(3); R = OMe, X = NMe(2), H, Cl, F, CF(3); R = CF(3), X = H, Cl, NMe(2); and R = NMe(2), X = H, Cl) were prepared, and the rates of reductive elimination of these complexes in the presence of excess PPh(3) are reported. The platinum complexes reductively eliminated biaryl compounds in quantitative yields with first-order rate constants that were independent of the concentration of PPh(3). Plots of Log(k(obs)/k(obs(H))) vs Hammett substituent constants (sigma) of the para substituents R and X showed that the rates of reductive elimination reactions depended on two different electronic properties. The reductive elimination from symmetrical bis-aryl platinum complexes occurred faster from complexes with more electron-donating para substituents R. However, reductive elimination from a series of electronically unsymmetrical bis-aryl complexes was not faster from complexes with the more electron-donating substituents. Instead, reductive elimination was faster from complexes with a larger difference in the electronic properties of the substituents on the two platinum-bound aryl groups. The two electronic effects can complement or cancel each other. Thus, this combination of electronic effects gives rise to complex, but now more interpretable, free energy relationships for reductive elimination.     

Low-melting, low-viscous, hydrophobic ionic liquids: aliphatic quaternary ammonium salts with perfluoroalkyltrifluoroborates

A novel class of low-melting, hydrophobic ionic liquids based on relatively small aliphatic quaternary ammonium cations ([R(1)R(2)R(3)NR](+), wherein R(1), R(2), R(3) = CH(3) or C(2)H(5), R = n-C(3)H(7), n-C(4)H(9), CH(2)CH(2)OCH(3)) and perfluoroalkyltrifluoroborate anions ([R(F)BF(3)](-), R(F) = CF(3), C(2)F(5), n-C(3)F(7), n-C(4)F(9)) have been prepared and characterized. The important physicochemical and electrochemical properties of these salts, including melting point, glass transition, viscosity, density, ionic conductivity, thermal and electrochemical stability, have been determined and comparatively studied with those based on the corresponding [BF(4)](-) and [(CF(3)SO(2))(2)N](-) salts. The influence of the structure variation in the quaternary ammonium cation and perfluoroalkyltrifluoroborate ([R(F)BF(3)](-)) anion on the above physicochemical properties is discussed. Most of these salts are liquids at 25 degrees C and exhibit low viscosities (58-210 cP at 25 degrees C) and moderate conductivities (1.1-3.8 mS cm(-1)). The electrochemical windows of these salts are much larger than those of the corresponding 1,3-dialkyimidazolium salts. Additionally, a number of [R(F)BF(3)](-) salts exhibit plastic crystal behavior.     

Anionic triazine systems

The synthesis of TAS+ C3N3F4- (1) (TAS+ = (Me2N)3S+) and the reactions of 1 with Me3SiOSiMe3 and Me3SiCF3 to give TAS+ C3N3F2O- (2) and TAS+[(NCF)(NCCF3)(NC(CF3)(2)]- (4) are reported. An isomer of 4, TAS+[(NCCF3)2(NCFCF3)]-, compound 6, was obtained by fluoride ion addition to (CF3CN)3. From the reactions with Me3SiNMe2 neutral fluoroamino triazines C3N3Fn(NMe2)(n-1) (n = 1, 2) were isolated. Possible reaction pathways are discussed, the X-ray structures of 1, 2, 4 and 6 were determined.     

Electrophilic fluorinating reagent mediated synthesis of fluorinated alpha-keto Ethers,benzil, and 6,6'-dialkoxy-2,2'-bipyridines

Interactions of various fluorinated and nonfluorinated alcohols with trans-stilbene in the presence of electrophilic reagents were studied. Under neat conditions, reactions of trans-stilbene (1) with fluorinated alcohols, R(f)OH (R(f) = CF3CH2-, CFH2CH2-, CF3CF2CH2-, CF2H(CF2)3CH2-, (CF3)2CH-, (CF3)3C- (2a-f) in the presence of an electrophilic reagent, 1-(chloromethyl)-4-fluoro-1,4-diazoniabicyclo[2.2.2]octane bis(tetrafluoroborate) (Selectfluor) or N,N-difluoro-2,2'-bipyridinium bis(tetrafluoroborate) (MEC-31), gave alpha-keto ethers (3a-f) and benzil (4) in good to moderate yields. alpha-Keto ether and benzil formation was very much dependent on the reaction time, the degree of fluorination of the alcohols, and whether a solvent such as CH3CN, DMF or DMA was utilized. In solution, alpha-keto ethers and benzil did not form. Interestingly, under neat conditions, nonfluorinated alcohols, ROH (R = CH3-, CH3CH2-, CH3CH2CH2-, CH3CH2CH2CH2-, CH3CH2CH2CH2CH2CH2-) (5g-k) did not react with trans-stilbene in the presence of MEC-31 but gave 6,6'-dialkoxy-2,2'-bipyridines (6g-k), regioselectively, in excellent isolated yields. On the other hand, fluorinated alcohols did not react with MEC-31. Reaction of MEC-31 with an excess of diethylene glycol (7) gave the bipyridine derivative (8) in 88% isolated yield. Reaction of 8 either with diethylaminosulfur trifluoride (DAST) or bis(2-methoxyethyl)aminosulfur trifluoride (Deoxofluor) readily produced the corresponding difluoro derivative (9) in 85% isolated yield. All new compounds have been characterized by spectroscopic and elemental analysis.     

Silylene extrusion from organosilanes via double geminal Si-H bond activation by a Cp*Ru(kappa2-P,N)+ complex: observation of a key stoichiometric step in the glaser-tilley alkene hydrosilylation mechanism

Treatment of Cp*RuCl(kappa2-P,N-2b) (2b = 2-NMe2-3-PiPr2-indene) with TlSO3CF3 produced the cyclometalated complex [4]+SO3CF3- in 94% isolated yield. Exposure of [4]+X- (X = B(C6F5)4 or SO3CF3) to Ph2SiH2 (10 equiv) or PhSiH3 afforded the corresponding [Cp*(mu-P,N-2b)(H)2Ru=SiRPh]+X- complexes, [5]+X- (R = Ph; X = B(C6F5)4, 82%; X = SO3CF3, 39%) and [6]+X- (R = H; X = B(C6F5)4, 94%; X = SO3CF3, 95%). Notably, these transformations represent the first documented examples of Ru-mediated silylene extrusion via double geminal Si-H bond activation of an organosilane-a key step in the recently proposed Glaser-Tilley (G-T) alkene hydrosilylation mechanism. Treatment of [5]+B(C6F5)4- with KN(SiMe3)2 or [6]+SO3CF3- with NaN(SiMe3)2 afforded the corresponding zwitterionic Cp*(mu-2-NMe2-3-PiPr2-indenide)(H)2Ru=SiRPh complex in 69% (R = Ph, 7) or 86% (R = H, 8) isolated yield. Both [6]+X- and 8 proved unreactive toward 1-hexene and styrene and provided negligible catalytic turnover in the attempted metal-mediated hydrosilylation of these substrates with PhSiH3, thereby providing further empirical evidence for the required intermediacy of base-free Ru=Si species in the G-T mechanism. Isomerization of the P,N-indene ligand backbone in [6]+X-, giving rise to [Cp*(mu-1-PiPr2-2-NMe2-indene)(H)2Ru=SiHPh]+X- ([9]+X-), was observed. In the case of [9]+SO3CF3-, net intramolecular addition of the Ru=Si-H group across the styrene-like C=C unit within the ligand backbone to give 10 (96% isolated yield) was observed. Crystallographic characterization data are provided for [4]+X-, [5]+X-, [6]+X-, 8, and 10.     

Novel ruthenium-based metathesis catalysts containing electron-withdrawing ligands: synthesis, immobilization, and reactivity

The syntheses and reactivity of seven different ruthenium-based metathesis catalysts are described. Ru(CF3COO)2(PCy3)(=CH-2-(2-PrO)C6H4) (1), Ru(CF3COO)2(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4) (2), and Ru(CF3COO)2(PCy(3))(1,3-dimesityldihydroimidazolin-2-ylidene)(=CHC6H5) (3) were prepared via chlorine exchange by reacting RuCl2(PCy3)2(=CH-2-(2-PrO)C6H4), RuCl2(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4), and RuCl2(PCy3)(1,3-dimesityldihydroimidazolin-2-ylidene)(=CHC6H5), respectively, with silver trifluoroacetate (Cy =cyclohexyl). In analogy, Ru(CF3CF2COO)2(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4) (4) and Ru(CF3CF2CF2COO)2(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4) (5) were prepared from RuCl2(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4) via reaction with CF3CF2COOAg and CF3CF2CF2COOAg, respectively. Ru(C6F5COO)2(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4) (6) and Ru(C6F5O)2(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4) (7) were prepared from RuCl2(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4) via reaction with C6F5COOTl and C6F5OTl, respectively. Supported catalysts Ru(PS-DVB-CH2OOCCF2CF2CF2COO)(CF3COO)(PCy3)(1,3-dimesityldihydroimidazolin-2-ylidene)(=CHC6H5) (8), Ru(PS-DVB-CH2OOCCF2CF2CF2COO)(CF3COO)(PCy3)(=CH-2-(2-PrO)C6H4) (9), and Ru(PS-DVB-CH2OOCCF2CF2CF2COO)(CF3COO)(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4) (10) were synthesized by reaction of RuCl2(PCy3)(1,3-dimesityldihydroimidazolin-2-ylidene)(=CHC6H5), RuCl2(PCy3)(=CH-2-(2-PrO)C6H4), and RuCl2(1,3-dimesityldihydroimidazolin-2-ylidene)(=CH-2-(2-PrO)C6H4), respectively, with a perfluoroglutaric acid-derivatized poly(styrene-co-divinylbenzene) (PS-DVB) support (silver form). Halogen exchange in PCy3-containing systems had to be carried out in dichloromethane in order to suppress precipitation of AgCl.PCy3. The reactivity of all new catalysts in ring-closing metathesis (RCM) of hindered electron-rich and -poor substrates, respectively, at elevated temperature (45 degrees C) was compared with that of existing systems. Diethyl diallylmalonate (DEDAM, 11), diethyl allyl(2-methylallyl)malonate (12), N,N-diallyl-p-toluenesulfonamide (13), N-benzyl-N-but-1-en-4-ylbut-2-enecarboxylic amide (14), and N-allyl-N-(1-carboxymethyl)but-3-en-1-yl-p-toluenesulfonamide (15) were used as educts. Supported catalysts were prepared with high loadings (2.4, 22.1, and 160 mg of catalyst/g PS-DVB for 8, 9, and 10, respectively). Catalyst 8 showed higher and catalysts 9 and 10 sowed significantly reduced activities in RCM compared to their homogeneous analogues. Thus, with 8, turnover numbers (TONs) up to 4200 were realized in stirred-batch (carousel) RCM experiments. To elucidate the nature of the bound species, catalysts 8-10 were subjected to 13C- and 31P-MAS NMR spectroscopy. These investigations provided evidence for the proposed structures. Leaching of ruthenium into the reaction mixture was low, resulting in ruthenium contents <85 ppb (ng/g) in the final RCM-derived products.     

Synthesis and spectroscopy of N3P3X5OCH=CH2 (X = Cl, F, OCH3, OCH2CF3, N(CH3)2) and N3P3X4(OCH=CH2)2 (X = Cl, N(CH3)2). Correlations of ultraviolet photoelectron spectroscopy and nuclear magnetic resonance data to electronic and geometrical structure

The syntheses of the vinyloxycyclotriphosphazene derivatives N3P3X5OCH=CH2 (X = OMe, OCH2CF3) and the N3P3(NMe2)4(OCH=CH2)2 isomeric mixture along with improved preparations of N3P3X5OCH=CH2 (X = F, NMe2) are reported. The interactions between the vinyloxy function and the cyclophosphazene in these and the previously reported N3P3Cl5 (OCH=CH2) and N3P3F6-n(OCH=CH2)n (n = 1-4) have been examined by ultraviolet photoelectron spectroscopy (UPS) and NMR spectroscopy. The UPS data for the chloro and fluoro derivatives show a strong electron-withdrawing effect of the phosphazene on the olefin that is mediated with decreasing halogen substitution. The 1H and 13C NMR data for N3P3X5OCH=CH2 (X = F, Cl, OMe, OCH2CF3, NMe2) show significant changes as a function of the phosphazene substituent. There is a linear correlation between the beta-carbon chemical shift on the vinyloxy unit and the phosphorus chemical shift at the vinyloxyphosphorus centers. The chemical shifts of the different phosphorus centers on each ring are also related in a linear fashion. These relationships may be understood in terms of the relative electron donor-acceptor abilities of the substituents on the phosphazene ring. The 1H NMR spectra of the N3P3(NMe2)4(OCH-CH2)2 isomeric mixture allow for assignment of the relative amounts of cis and trans isomers. A model for the observed cis preference in the formation of N3P3Cl4(OCH=CH)2 is presented.     

Fluorine-contained photoacid generators (PAGs) and corresponding polymer resists

A new series of fluorinated anionic photoacid generators (PAGs) (F4-MBS-TPS, F4VBzBS-TPS, F4-IBBS-TPS, CF3 MBS-TPS, MTFBS-TPS and VBzTFBS-TPS), and corresponding PAG bound polymeric resists (HS-EA-PAG) based on hydroxystyrene (HOST) and 2-ethyl-2-adamantyl methacrylate (EA), (GB-EA-PAG) based on γ-butyrolactone methacrylate (GBLMA) and 2-ethyl-2-adamantyl methacrylate (EA) were prepared and characterized. The acid generating efficiency of PAG bound polymers (HS-EA-PAG) series was in the range of 54-81%, which agrees well with the electron withdrawing effect of the substituents. With regard to the referenced F4-PAG bound polymer with 68% acid generating efficiency, and our previously reported EUVL results of F4-MBS-TPS bound polymer photoresists, these new PAG bound polymers should be effective resists for 193 nm or EUV lithography.     

Cyclic quaternary ammonium ionic liquids with perfluoroalkyltrifluoroborates: synthesis, characterization, and properties

New cyclic quaternary ammonium salts, composed of N-alkyl(alkyl ether)-N-methylpyrrolidinium, -oxazolidinium, -piperidinium, or -morpholinium cations (alkyl = nC4H9, alkyl ether = CH3OCH2, CH3OCH2CH2) and a perfluoroalkyltrifluoroborate anion ([R(F)BF3]-, R(F) = CF3, C2F5, nC3F7, nC4F9), were synthesized and characterized. Most of these salts are liquids at room temperature. The key properties of these salts--phase transitions, thermal stability, density, viscosity, conductivity, and electrochemical windows--were measured and compared to those of their corresponding [BF4]- and [(CF3SO2)2N]- salts. The structural effect on all the above properties was intensively studied in terms of the identity of the cation and anion, variation of the side chain in the cation (i.e., alkyl versus alkyl ether), and change in the length of the perfluoroalkyl group (R(F)) in the [R(F)BF3]- ion. The reduction of Li+ ions and reoxidation of Li metal took place in pure N-butyl-N-methylpyrrolidinium pentafluoroethyltrifluoroborate as the supporting electrolyte. Such comprehensive studies enhance the knowledge necessary to design and optimize ionic liquids for many applications, including electrolytes. Some of these new salts show desirable properties, including low melting points, high thermal stabilities, low viscosities, high conductivities, and wide electrochemical windows, and may thus be potential candidates for use as electrolytes in high-energy storage devices. In addition, many salts are ionic plastic crystals.     

The gas phase tropospheric removal of fluoroaldehydes (CxF2x+1CHO, x = 3, 4, 6)

The rate coefficient of the OH reaction with the perfluoroaldehydes C(3)F(7)CHO and C(4)F(9)CHO have been determined in the temperature range 252-373 K using the pulsed laser photolysis-laser induced fluorescence (PLP-LIF) method: k(C(3)F(7)CHO+OH) = (2.0 +/- 0.6) x 10(-12) exp[-(369 +/- 90)/T] and k(C(4)F(9)CHO+OH) = (2.0 +/- 0.5) x 10(-12) exp[-(356 +/- 70)/T] cm(3) molecule(-1) s(-1), corresponding to (5.8 +/- 0.6) x 10(-13) and (6.1 +/- 0.5) x 10(-13) cm(3) molecule(-1) s(-1), respectively, at 298 K. The UV absorption cross sections of these two aldehydes and CF(3)(CF(2))(5)CH(2)CHO have been measured over the range 230-390 nm at 298 K and also at 328 K for CF(3)(CF(2))(5)CH(2)CHO. The obtained results for C(3)F(7)CHO and C(4)F(9)CHO are in good agreement with two recent determinations but the maximum value of the absorption cross section for CF(3)(CF(2))(5)CH(2)CHO is over a factor of two lower than the single one recently published. The photolysis rates of C(3)F(7)CHO, C(4)F(9)CHO and CF(3)(CF(2))(5)CHO have been measured under sunlight conditions in the EUPHORE simulation chamber in Valencia (Spain) at the beginning of June. The photolysis rates were, respectively, J(obs) = (1.3 +/- 0.6) x 10(-5), (1.9 +/- 0.8) x 10(-5) and (0.6 +/- 0.3) x 10(-5) s(-1). From the J(obs) measurements and calculated photolysis rate J(calc), assuming a quantum yield of unity across the atmospheric range of absorption of the aldehydes, quantum yields J(obs)/J(calc) = (0.023 +/- 0.012), (0.029 +/- 0.015) and (0.046 +/- 0.028) were derived for the photodissociation of C(3)F(7)CHO, C(4)F(9)CHO and CF(3)(CF(2))(5)CHO, respectively. The atmospheric implication of the data obtained in this work is discussed. The main conclusion is that the major atmospheric removal pathway for fluoroaldehydes will be photolysis, which under low NO(x) conditions, may be a source of fluorinated carboxylic acids in the troposphere.     

Time-resolved laser fluorescence spectroscopy and extended X-ray absorption spectroscopy investigations of the N3- complexation of Eu(III), Cm(III), and Am(III) in an ionic liquid: differences and similarities

The complexation of the lanthanide Eu(III) and the actinides Cm(III) and Am(III) by N3- was investigated by application of time-resolved laser fluorescence spectroscopy (TRLFS) and X-ray absorption spectroscopy (XAFS) in the ionic liquid solution of C4mimTf2N (1-butyl-3-methylimidazolium-bis(trifluoromethylsulfonyl)imide). TRLFS measurements show that the interaction of azide with Eu(CF3SO3)3 and Eu(ClO4)3 results in both dynamic luminescence quenching by collisional encounters of N3- with Eu(III) and static luminescence quenching by inner-sphere complexation of Eu(III) by N3-. Hereby, the complexation of Eu-triflate by azide starts at a lower N3- concentration as compared to the perchlorate salt. The authors ascribe this phenomenon to a stronger bonding of ClO4- toward the metal ion than triflate, as well as to a stronger electrostatic repulsion of N3- by the perchlorate ligand. In both actinide samples (Cm(ClO4)3, Am(ClO4)3), the complexation with azide exhibits a clear kinetic hindrance. Nevertheless, mixed actinide-perchlorate-azide complexes are formed after several days in C4mimTf2N. The different reaction kinetics for the Ln- and An-complexation by azide may provide the opportunity for an effective separation of lanthanides from actinides in the nuclear fuel cycle by the use of N-based extractants in ionic liquid solution.