共查询到20条相似文献,搜索用时 171 毫秒
1.
2.
本文合成了含酰胺基团和不含酰胺基团的两类Gemini阳离子表面活性剂,测定了其表面活性参数,研究了酰胺基团对表面活性剂的表面活性和聚集行为的影响。结果表明,酰胺基团提高了Gemini阳离子表面活性剂的临界胶团浓度,降低了胶团聚集数,增强了胶团微极性,增大了表面活性剂的饱和吸附量。 相似文献
3.
4.
5.
6.
7.
对纯镍及其表面离子注钇样品在1000℃空气中的恒温氧化和循环氧化行为进行了研究。用扫描电镜(SEM)和透射电镜(TEM)对氧化膜的表面形貌及结构进行了观测。研究表明离子注钇极大地提高了金属镍的抗氧化性能。此外,用声发射(AE)技术研究了氧化膜/基体界面上缺陷的分布情况,并用激光拉曼(Raman)谱对注钇引起的膜内应力变化进行了测量。结果表明,离子注钇降低了NiO氧化膜的生长速率,减小了表面NiO的晶粒尺寸,降低了膜内压应力水平。同时,离子注钇还减小了氧化膜/基体界面缺陷的平均尺寸和数目,因此,极大地提高了镍表面NiO氧化膜的粘附性和保护性。 相似文献
8.
9.
10.
葡萄糖传感器在几十年的发展中取得了重大进展,经历了三代基于酶葡萄糖传感器之后,现已进入第四代无酶葡萄糖传感器的发展阶段.本文从基于酶和无酶两类介绍了不同葡萄糖传感器的测试原理,综述了近年来纳米材料在无酶电化学葡萄糖传感器方面应用的主要研究进展,对不同类别纳米材料的制备方法以及所构建传感器的灵敏度、选择性、检测范围和稳定性等进行了评述,分析了制约无酶葡萄糖传感器商业化应用的主要原因.其中,贵金属纳米材料主要讨论了铂、金和钯;过渡金属纳米材料主要讨论了镍、铜以及其氧化物;双金属纳米材料主要讨论了合金和复合物;碳纳米材料主要讨论了单壁(多壁)碳纳米管和石墨烯.此外,本文也对无酶葡萄糖传感器的发展方向和趋势进行了展望. 相似文献
11.
A rapid, sensitive and selective high performance liquid chromatography (HPLC) method was developed and validated for determination of loganin in rat tissues. Samples were prepared based on a simple protein precipitation. Separation of loganin was achieved on a reversed-phase C(18) column (250 x 4.6 mm, 5 microm) with a mobile phase consisting of acetonitrile and water (16:84, v/v) at a flow rate of 1.0 mL/min. The detection wavelength was set at 236 nm and the temperature of the column was kept at 30 degrees C. The method was applied to study tissue distribution of loganin in rats after a single administration of loganin at a dose of 20 mg/kg. The highest level was observed in kidney, then in stomach, lung and small intestine. The lowest level was found in brain. The peak levels were attained at 90 min in most tissues. It was indicated that kidney was the major distribution tissue of loganin in rats, and that loganin had difficulty in crossing the blood-brain barrier. It was also found there was no long-term accumulation of loganin in rat tissues. 相似文献
12.
建立了亲水相互作用色谱柱(HILIC)串联C18柱的方法,高效分离实际样品中的胭脂红,并对色谱柱的串联顺序以及色谱分离条件进行优化。结果表明:当HILIC柱在前C18柱在后,流动相为乙腈-乙酸铵(5 mmol/L)=91∶9(V/V),流速为0.9 mL/min,柱温为25℃,检测波长为508 nm时,此时胭脂红的分离效果最佳。在最佳的色谱分离条件下,选用两种市售饮品进行实际样品的测定,回收率在81.2%~119%。方法适用于水相样品中的强极性物质的高效分离与分析。 相似文献
13.
A New Capillary Electrophoresis Apparatus with Piezoelectric Ceramics High Voltage Source and Amperometric Detector 总被引:13,自引:0,他引:13
Zuan Guang CHENI Jin Yuan MO Xiao Yun YANG Li Shi WANG Xue Ting MEIZ Min Sheng ZHANGI 《中国化学快报》1999,(3)
IntroductionHighperformancecapiliar}'electrophoresis(HPCE)isanewanalyticaltechnology'rapidly'developedinrecentyears.Withtheadvantagesofsmallsample.highsensitivity,highresolution.rapidanalysisandverycheaprunning,ithasbeenappliedinchemistry'.lifescienc... 相似文献
14.
15.
16.
头发微量元素及钙含量测定的应用价值评价 总被引:5,自引:1,他引:5
熊丽萍 《广东微量元素科学》2003,10(8):49-52
以125例2~5岁儿童为对象,测定其全血和头发铅、锌、铁、钙含量;以全血铅、锌、铁、钙含量为标准,应用诊断试验评价方法评价头发铅、锌、铁、钙测定的应用价值。结果表明,头发铅测定的灵敏度可达88.3%,应用串联试验,头发铅测定的特异度可提高至81.8%,阳性预测值达69.6%,阴性预测值达78.8%。头发锌测定的灵敏度可达86.1%,特异度为52.4%,阳性预测值75.6%,阴性预测值为68.8%。头发铁测定的灵敏度为72.0%,特异度为77.5%,阳性预测值为83.6%,阴性预测值为63.3%,头发钙测定的灵敏度为78.9%,特异度为69.1%,阳性预测值为69.8%,阴性预测值为78.4%。锌缺乏、铁缺乏、钙缺乏,或铅负荷过高,或数种微量元素缺乏及铅中毒并存是当前严重影响儿童健康成长的常见原因。运用现代检测技术早期发现微量元素缺乏及铅中毒患儿并及时采取防治措施对促进儿童正常生长发育至关重要。头发样品容易采集、运送和保存,因此头发微量元素含量测定适合在中小城镇及农村使用。但其应用价值应进行科学评价。 相似文献
17.
建立乙酰丙酮分光光度法测定土壤中甲醛含量的分析方法。在磷酸介质中,土壤中的甲醛经过加热蒸馏提取,与乙酰丙酮反应生成黄色的二乙酰基二氢二甲基吡啶,然后于412 nm波长处测定其吸光度。甲醛含量在0.0~25μg范围内与吸光度呈良好的线性关系,线性相关系数r=0.999 6,加标回收率为76.2%~87.5%,方法检出限为0.03 mg/kg,定量限为0.12 mg/kg,测定结果的相对标准偏差为2.73%~3.68%(n=6)。该方法灵敏度高,分析速度快,适用于土壤中甲醛含量的测定。 相似文献
18.
采用气相色谱法测定了化妆品中的二甘醇,并用计量学方法对测量不确定度进行了评定。结果显示,二甘醇含量在0.01~0.1 mg/mL范围内与色谱峰面积呈线性关系,线性相关系数为0.999 9,检测限为0.41μg/mL,不同类别的3种样品中二甘醇测定结果的相对标准偏差在0.24%~1.52%范围内(n=6),平均回收率在93.65%~104.36%之间。当啫喱水样品中二甘醇的测定结果为48.1 mg/kg时,其扩展不确定度为1.4 mg/kg。该方法可用于化妆品中二甘醇含量的质量控制。 相似文献
19.
20.
Cationic Emulsion Polymerization of Octamethylcyclotetrasiloxane (D4) in Mixtures with Alkoxysilanes
Janusz Kozakiewicz Joanna Trzaskowska Micha Kdzierski Joanna Sotysiak Elbieta U. Stolarczyk Izabela Ofat-Kawalec Jarosaw Przybylski 《Molecules (Basel, Switzerland)》2022,27(3)
The cationic emulsion polymerization of octamethylcyclotetrasiloxane (D4) in mixtures with methyltriethoxysilane (MTES) and vinyltriethoxysilane (VTES) was studied by FTIR ATR, GC, the development of a toluene insoluble fraction of the polymer and a gravimetric analysis. The polymerization of D4 alone was also conducted for comparison and, additionally, the development of molecular weight of polydimethylsiloxane (PDMS) obtained in that process was studied by GPC. Dodecylbenzenesulphonic acid (DBSA) was used as a surfactant and catalyst. The process was carried out in a “starved feed” mode by adding dropwise the monomer mixture to the aqueous solution of DBSA. FTIR ATR spectra were recorded by the sensor placed in the probe tip of a ReactIR 15TM apparatus. It was found that the silicone polymer formation proceeded faster when D4 was polymerized in the mixture with alkoxysilanes, especially in the beginning of the process, and that already at the beginning of the process, the partly crosslinked polymer was formed. The induction period of ca. 30 min was observed and the concentration of cyclic siloxanes (D4 and decamethylcyclopentasiloxane—D5) remained at a very low level in the course of the reaction and only traces were detected in the final product. The particle size development in the course of the reaction was also studied and it was found that the particle size distribution was bimodal and was broadening as the reaction proceeded, though this phenomenon was less distinct when D4 was polymerized in the mixtures with alkoxysilanes. The structure of the reaction product was confirmed by 29Si NMR. 相似文献