Electrochemical and PM-IRRAS studies of the effect of the static electric field on the structure of the DMPC bilayer supported at a Au(111) electrode surface

Differential capacity, charge density measurements, and polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) were employed to study the fusion of small unilamellar vesicles of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) on a Au(111) electrode surface. The differential capacity and charge density data showed that the vesicles fuse onto the gold surface at charge densities between -10 microC/cm(2) < sigma(M) < 10 microC/cm(2) to form a bilayer. When sigma(M) < -10 microC/cm(2), the film is detached from the surface but it remains in close proximity to the surface. PM-IRRAS experiments provided IR spectra for the bilayer in the adsorbed and the desorbed state. Ab initio normal coordinate calculations were performed to assist interpretation of the IR spectra. The IR bands were analyzed quantitatively, and this analysis provided information concerning the conformation and orientation of the acyl chains and the polar head region of the DMPC molecule. The orientation of the chains, hydration, and conformation of the headgroup of the DMPC molecule strongly depend on the electrode potential.     

Electric-field-driven surface aggregation of a model zwitterionic surfactant

Electrochemical measurements, atomic force microscopy, and scanning tunneling microscopy have been combined to describe the electric-field-controlled surface aggregation of N-dodecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate (DDAPS), a model zwitterionic surfactant, at a Au(111) electrode surface. At concentrations below the critical micelle concentration (CMC), the monomer adsorbs and aggregates at the surface. The charge on the metal (sigmaM) controls the orientation of adsorbed molecules and consequently the film structure. At high negative (sigmaM < -5 microC cm-2) charge densities, a spongy, disordered film is formed in which the polar heads are turned toward the solution. At high positive (sigmaM > +5 microC cm-2) charge densities, a planar film with "blisters" is observed with the polar heads of DDAPS turned to the metal. Hemicylindrical aggregates are observed in the intermediate charge density range (-5 < sigmaM < +5 microC cm-2). At bulk concentrations higher than the CMC, micelles adsorb and the structure of these films is controlled by the fusion of the adsorbed micelles. STM and AFM images provided direct visualization of this field-driven surface aggregation of the zwitterionic surfactant.     

Layer-by-layer PMIRRAS characterization of DMPC bilayers deposited on a Au111 electrode surface

A combination of Langmuir-Blodgett and Langmuir-Schaefer techniques was employed to deposit 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) bilayers at a gold electrode surface. One leaflet consisted of hydrogen-substituted acyl chains, and the second leaflet was composed of molecules with deuterium-substituted acyl chains. This architecture allowed for layer-by-layer analysis of the structure of the bilayer. Photon polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) was used to determine the conformation and orientation of the acyl chains of DMPC molecules in the individual leaflets as a function of the potential applied to the gold electrode. The bilayer is adsorbed onto the metal surface when the field applied to the membrane does not exceed approximately 108 V/m. When adsorbed, the bottom leaflet is in contact with a hydrophobic metal surface, and the top leaflet is interacting with the aqueous solution. The asymmetry of the environment has an effect on the orientation of the DMPC molecules in each leaflet. The tilt angle of the acyl chains of the DMPC molecules in the bottom leaflet that is in contact with the gold is approximately 10 degrees smaller than that observed for the top leaflet that is exposed to the solution. These studies provide direct evidence that the structure of a phospholipid bilayer deposited at an electrode surface is affected by interaction with the metal.     

Influence of the electric field on a bio-mimetic film supported on a gold electrode

A model biological membrane was formed by fusion of mixed cholesterol and DMPC (dimyristoylphosphatidylcholine) phospholipid vesicles onto a gold-coated quartz support. The gold surface was charged and the influence of the charge at the solid support on the structure and integrity of the phospholipid bilayer was investigated using the specular reflection of neutrons and electrochemical measurements. When the surface charge density is close to zero, the lipid vesicles fuse directly on the surface to form a bilayer with a small number of defects and hence low water content. When the support's surface is negatively charged the film swells and incorporates water due to the field driven poration of the membrane. When the charge density is more negative then -8 microC cm(-2) the bilayer is detached from the metal surface. However, it remains in close proximity to the metal electrode, suspended on a thin cushion of water. The film thicknesses, calculated from neutron reflectivity, have allowed us to determine the tilt angle of the lipid molecules as a function of the support's charge density. The lipid molecules are tilted 55 degrees from the surface normal at zero charge density but become significantly more perpendicular (30 degrees tilt angle) at charge densities more negative than -8 microC cm(-2). The tilt angle measurements are in very good agreement with previous IR studies. This paper describes the highlights of a more in-depth study which is fully described in [1].     

Self-assembly of phospholipid molecules at a Au(111) electrode surface

We described the first scanning tunneling microscopy study of spreading unilamellar vesicles of 1,2-dimyristoyl-sn-glycero-3-phosphatidylcholine (DMPC) at a Au(111) electrode surface. At the initial stage of the film formation, the molecular resolution images revealed that DMPC molecules are adsorbed flat with the acyl chains oriented parallel to the surface. The molecules assemble into double rows by aligning the acyl chains in the nearest neighbor direction of the reconstructed Au(111) surface and assuming a 90 +/- 10 degrees angle with respect to line of the molecular row. After approximately 30 min, this film is transformed into a hemimicellar state with long rows characteristic for the formation of hemicylindrical surface micelles. At hydrophilic surfaces such as glass, spreading of vesicles involves adsorption, rupture, and sliding of a single bilayer on a lubricating film of the solvent. We have provided the first evidence that a different mechanism is involved in spreading the vesicles at gold. The molecules released by rupture of vesicles self-assemble into an ordered film, and the assembly is controlled by the chain-substrate interaction.     

Spectroelectrochemical studies of bilayers of phospholipids in gel and liquid state on Au(111) electrode surface

Differential capacity, chronocoulometry and Polarization Modulation Fourier Transform Infrared Reflection Absorption Spectroscopy (PM FTIRRAS) were employed to investigate spreading of small unilamellar vesicles (SUVs) of DOPC and DMPC onto a Au(111) electrode surface. The electrochemical experiments demonstrated that vesicles fuse onto the electrode surface and at E>-0.5V (SSCE) or at charge densities -10-0.5 V (SSCE), the tilt angle increases to approximately 42 degrees. The increase of the tilt angle is discussed in terms of a change in the packing of the polar head of the phospholipids molecules in the bilayer adsorbed at the electrode surface.     

Electrochemical and PM-IRRAS studies of the effect of cholesterol on the properties of the headgroup region of a DMPC bilayer supported at a Au(111) electrode

Polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) was employed to investigate the interaction of cholesterol with the headgroups of dimyristoylphosphatidycholine (DMPC) molecules under a static electric field. DMPC/cholesterol (7:3 molar ratio) mixtures form a bilayer on a Au(111) electrode surface by fusion and spreading of small unilamellar vesicles. PM-IRRAS experiments provided detailed information concerning the conformation and hydration of headgroups of DMPC bilayers in the presence and absence of 30% cholesterol. The presence of 30% cholesterol increases the space between the headgroups of DMPC molecules and hence increases the hydration of the DMPC/cholesterol mixed bilayer. The conformational state of the headgroups of DMPC molecules in the mixed bilayer is also significantly changed. The phosphate group is closer to the surface compared with the pure DMPC bilayer. The conformation of the -O-C-C-N moiety changes from gauche to trans in the presence of cholesterol.     

STM studies of fusion of cholesterol suspensions and mixed 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC)/cholesterol vesicles onto a Au(111) electrode surface

Electrochemical scanning tunneling microscopy (EC-STM) has been applied to study the structure of the film formed by fusion of cholesterol suspensions and mixed dimyristoylphosphatidylcholine (DMPC)/cholesterol vesicles on a Au(111) electrode surface. It has been demonstrated that cholesterol molecules assemble at the gold support into several structures templated by the crystallography of the metal surface and involving flat or edge-on adsorbed molecules. Studies of the film formed by fusion of mixed DMPC/cholesterol vesicles revealed that ordered domains of either pure DMPC or pure cholesterol were formed. These results indicate that, at the metal surface, the molecules released by the rupture of a vesicle initially self-assemble into a well-ordered monolayer. The self-assembly is controlled by the hydrocarbon skeleton-metal surface interaction. In the case of mixed DMPC/cholesterol vesicles, the molecule-metal interactions induce segregation of the two components into single component domains. However, the molecule-metal interaction induced monolayer is a transient phenomenon. When more molecules accumulate at the surface, the molecule-molecule interactions dominate the assembly, and the monolayer is transformed into a bilayer.     

Electrochemical and PM-IRRAS a glycolipid-containing biomimetic membrane prepared using Langmuir-Blodgett/Langmuir-Schaefer deposition

Differential capacitance, chronocoulometry, and polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) measurements were used to characterize the structure and orientation of a DMPC + cholesterol + GM 1 (60:30:10 mol %) bilayer supported at a Au(111) electrode surface prepared using combined Langmuir-Blodgett/Langmuir-Schaefer (LB/LS) deposition. The electrochemical measurements indicate that the incorporation of ganglioside GM 1 into the membrane significantly improves the quality of the bilayer, reflected in the very low capacitance value of approximately 0.8 microF cm (-2). An analysis of the infrared data suggests that the incorporation of the glycolipid into the membrane changes both the orientation of the lipid acyl chains in the membrane and the hydration of the membrane, particularly with respect to the interfacial region of the lipids.     

Polarization modulation infrared reflection-absorption spectroscopy studies of the influence of perfluorinated compounds on the properties of a model biological membrane

A combination of the Langmuir-Blodgett and Langmuir-Schaefer techniques has been used to build a 1,2-dimyristoyl- sn-glycero-3-phosphocholine (DMPC) bilayer at a Au(111) electrode surface with hydrogen-substituted acyl chains in the top leaflet (solution side) and deuterium-substituted acyl chains in the bottom leaflet (gold side). Polarization modulation infrared reflection-absorption spectroscopy was used to determine changes in the conformation and orientation of the acyl chains of DMPC caused by the incorporation of two selected perfluorinated compounds, perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS), into the top leaflet of the bilayer. The incorporation of perfluorinated compounds into the DMPC bilayer caused a broadening of the methylene peaks and a shift in the methylene band positions toward higher frequencies. In addition, the tilt angle of the acyl chains decreased in comparison to the tilt angle of a pure DMPC bilayer. The reported tilt angles were smaller upon insertion of PFOS ( approximately 24 degrees ) than in the presence of PFOA ( approximately 30 degrees ). Overall, the results show that the incorporation of the perfluorinated acids has an effect on the bilayer similar to that of cholesterol by increasing the membrane fluidity and thickness due to a decrease in the tilt angle of the acyl chains.     

Potential-driven structural changes in Langmuir-Blodgett DMPC bilayers determined by in situ spectroelectrochemical PM IRRAS

Combined Langmuir-Blodgett vertical withdrawing and Langmuir-Schaefer horizontal touch (LB-LS) methods were employed to transfer DMPC bilayers onto a Au(111) electrode surface. Charge density measurements and photon polarization modulation infrared reflection absorption spectroscopy were employed to investigate electric field induced changes in the structure of the bilayer. The results show that the physical state and the molecular arrangement found in the monolayer at the air-water interface is to a large extent preserved in the bilayer formed by the LB-LS method. This approach provides an opportunity to produce supported bilayers with a well-designed architecture. The properties of the bilayer formed by the LB-LS method were compared to the properties of the bilayer produced by spontaneous fusion of unilamellar vesicles investigated in an earlier study (Bin, X.; Zawisza, I.; Lipkowski, J. Langmuir 2005, 21, 330-347). The tilt angles of the acyl chains are much smaller in the bilayer formed by the LB-LS method and are closer to the angles observed for vesicles and stacked hydrated bilayers. The tilt angles of the phosphate and choline groups are also smaller and are characteristic of an orientation in which the area per DMPC molecule is small. The electric field induced changes of these angles are also less pronounced in the bilayer formed by the LB-LS method. We have shown that these differences are a result of the higher packing density of the phospholipid molecules in the bilayer formed by the LB-LS method.     

PM-IRRAS investigation of self-assembled monolayers grafted onto SiO2/Au substrates

Polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) was used to characterize self-assembled monolayers (SAMs). Novel ester-terminated organosilicon coupling agents possessing a trialkoxysilyl headgroup and a urea group in the linear alkyl chains (4) were synthesized and grafted onto SiO(2)/Au substrates (SiO(2) film of 200 ? thickness deposited on gold mirror). This composite substrate allowed the anchoring of SAMs and preserved the high reflectivity for infrared radiation. PM-IRRAS spectra with very high signal-to-noise ratios have been obtained in the mid-infrared spectral range allowing monitoring of the grafted SAMs. Quantitative analysis of the measured signal is described to compare PM-IRRAS and conventional IRRAS spectra. This quantitative analysis has been validated since the band intensities in the corrected PM-IRRAS and conventional IRRAS spectra are identical. Orientation information on the different functional groups has been obtained comparing the corrected PM-IRRAS spectrum with the one calculated using isotropic optical constants of ester-terminated organosilicon coupling agents 4. The carbonyls of the urea groups are preferentially parallel to the substrate surface favoring intermolecular hydrogen bonding and consequently a close packing of the molecules attached to the surface. By contrast, the alkyl chains present gauche defects and are poorly oriented.     

AFM studies of solid-supported lipid bilayers formed at a Au(111) electrode surface using vesicle fusion and a combination of Langmuir-Blodgett and Langmuir-Schaefer techniques

Atomic force microscopy (AFM) has been used to characterize the formation of a phospholipid bilayer composed of 1,2-dimyristyl-sn-glycero-3-phosphocholine (DMPC) at a Au(111) electrode surface. The bilayer was formed by one of two methods: fusion of lamellar vesicles or by the combination of Langmuir-Blodgett (LB) and Langmuir-Schaefer (LS) deposition. Results indicate that phospholipid vesicles rapidly adsorb and fuse to form a film at the electrode surface. The resulting film undergoes a very slow structural transformation until a characteristic corrugated phase is formed. Force-distance curve measurements reveal that the thickness of the corrugated phase is consistent with the thickness of a bilayer lipid membrane. The formation of the corrugated phase may be explained by considering the elastic properties of the film and taking into account spontaneous curvature induced by the asymmetric environment of the bilayer, in which one side faces the gold substrate and the other side faces the solution. The effect of temperature and electrode potential on the stability of the corrugated phase has also been described.     

Adsorption of N-Decyl-N,N,N-trimethylammonium triflate (DeTATf), a cationic surfactant, on the Au(111) electrode surface

The adsorption behavior of the cationic surfactant N-decyl-N,N,N-trimethylammonium triflate (DeTATf) on the Au(111) electrode surface was characterized using cyclic voltammetry, differential capacity, and chronocoulometry. The thermodynamics of the ideally polarized electrode have been employed to determine the Gibbs excess and the Gibbs energy of adsorption. The results show that the adsorption of DeTATf has a multistate character. At low bulk DeTATf concentrations, the adsorption state is consistent with the formation of an adsorbed film of nearly flat molecules. At higher concentrations this film may represent a three-dimensional aggregated state. At negative potentials and charge densities close to 0 microC cm-2, the data suggest the formation of a film of tilted molecules oriented with the hydrocarbon tail toward the metal surface and the polar head toward the solution. A surprising result of this study is that DeTATf displays adsorption characteristics of a zwitterionic rather than a cationic surfactant. This behavior indicates that the adsorbed species is an ion pair.     

Adsorption of insoluble surfactants at the Au(111)/solution interface

The adsorption of surfactants, which form insoluble monolayers on an aqueous substrate, onto a single crystal gold electrode have been described. Adsorption of this class of surfactants have been characterized using a combination of electrochemistry and Langmuir-Blodgett techniques. We have developed a technique to simultaneously measure the film pressure at the gas-solution (GS) interface and the film pressure of the surfactants that spread to the metal-solution (MS) interface. We have shown that surfactants such as octadecanol and stearic acid, which interact weakly with the metal surface, adsorb at an uncharged MS interface (at the potential of zero charge) and progressively desorb when the electrode surface is charged negatively. The electrode potential (charge density at the metal surface) influences the transfer of the surfactant from the GS interface to the MS interface. The transfer ratio is 1:1 at an uncharged MS interface, and is progressively reduced to zero when the MS interface is charged. We have employed 12-(9-anthroloxy) stearic acid, a surfactant dye molecule, to study the mechanism of potential induced desorption and adsorption of the film of insoluble molecules. With the help of electroreflectance spectroscopy and light scattering measurements, we have shown that if desorbed, the surfactant molecules form micelles (flakes or vesicles) that are trapped under the electrode surface. The micelles spontaneously spread back onto the electrode surface when the charge density at the metal approaches zero. The repeatable desorption and readsorption involve micellisation of the film at negative potentials and spontaneous spreading of the micelles to reform the monolayer at potentials close to pzc.     

Increasing surface charge density induces interdigitation in vesicles of cationic amphiphile and phosphatidylcholine

Binary vesicles of cationic lipid dihexadecyldimethylammoniumbromide (DHAB) and 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) were examined by differential scanning calorimetry, fluorescence spectroscopy, and Fourier transform infrared spectroscopy. DHAB/DMPC vesicles demonstrate a complex dependence of the main-transition temperature (T(m)) on their mole proportion of DHAB, with a maximum of 42 degrees C at X(DHAB) = 0.4. An increase of T(m) at X(DHAB) < 0.4 is explained by reorientation of P(-)-N(+) dipoles of the phosphocholine headgroup, resulting in tighter packing of the acyl chains, which increases the thermal energy required for trans --> gauche isomerization. At X(DHAB) > 0.4, Coulombic repulsion between the cationic DHAB headgroups expands the bilayer evident as a decrease in T(m) until a plateau of approximately 28 degrees C at 0.7 < or = X(DHAB) > or = 0.9 is reached, followed by an increment of T(m) to approximately 30 degrees C at X(DHAB) > 0.9. The quenching of DPH-PC fluorescence emission and the decrease in the ratio of peak height intensities of symmetric and antisymmetric -CH(2)- stretching modes suggest an interdigitated phase to form at X(DHAB) > 0.6. Interdigitation allows the membrane to accommodate the augmented Coulombic repulsion between DHAB headgroups because of increasing cationic surface charge density while simultaneously causing tighter packing of the acyl chains evident first as a plateau at 0.7 < or = X(DHAB) > or = 0.9 and subsequently as an increase in T(m) at X(DHAB) > 0.9. Screening of the membrane charges by NaCl abolishes the quenching of DPH emission and decreases T(m), thus revealing electrostatic repulsion as the driving force for interdigitation.     

Electric field driven changes of a gramicidin containing lipid bilayer supported on a Au(111) surface

Langmuir-Blodgett and Langmuir-Schaeffer methods were employed to deposit a mixed bilayer consisting of 90% of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and 10% of gramicidin (GD), a short 15 residue ion channel forming peptide, onto a Au(111) electrode surface. This architecture allowed us to investigate the effect of the electrostatic potential applied to the electrode on the orientation and conformation of DMPC molecules in the bilayer containing the ion channel. The charge density data were determined from chronocoulometry experiments. The electric field and the potential across the membrane were determined through the use of charge density curves. The magnitudes of potentials across the gold-supported biomimetic membrane were comparable to the transmembrane potential acting on a natural membrane. The information regarding the orientation and conformation of DMPC and GD molecules in the bilayer was obtained from photon polarization modulation infrared reflection absorption spectroscopy (PMIRRAS) measurements. The results show that the bilayer is adsorbed, in direct contact with the metal surface, when the potential across the interface is more positive than -0.4 V and is lifted from the gold surface when the potential across the interface is more negative than -0.4 V. This change in the state of the bilayer has a significant impact on the orientation and conformation of the phospholipid and gramicidin molecules. The potential induced changes in the membrane containing peptide were compared to the changes in the structure of the pure DMPC bilayer determined in earlier studies.     

Surface phase behavior in Langmuir monolayers of diethylene glycol mono-n-hexadecyl ether at the air-water interface

The surface phase behavior of condensed-phase domains formed during a first-order phase transition in Langmuir monolayers of diethylene glycol mono-n-hexadecyl ether at the air-water interface has been investigated by Brewster angle microscopy and polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS). A variety of two-dimensional (2D) structures are observed just after the appearance of the phase transition at different temperatures. At 10 and 15 degrees C, the domains are found to be small nuclei of irregular structures. Spiral structures are observed at 20 and 22 degrees C, while striplike structures at 24 degrees C. The spiral domains attain increasingly compact shape with increasing temperature, and finally become circular at >or=26 degrees C. Increases in temperature result in dehydration in the ethylene oxide chain, which increases the hydrophobicity, and impart to the molecules a longer-chain-like character. As a result line tension increases with increasing temperature, which probably outweighs the dipole-dipole repulsions showing circular domains at higher temperatures. The PM-IRRAS measurement reveals that the nu(as)(CH(2)) mode moves to lower wave numbers indicating that the LE-LC (liquid expanded-liquid condensed) phase transition during the compression of the monolayer involves changes in the conformational order of the molecules with a preferential increase in the planner trans zigzag conformation of the hydrocarbon chains. The nu(as)(CH(2)) mode in the LC region of the isotherm shows a constant value around 2917.8 cm(-1) indicating a stable state of the monolayer with an almost all-trans conformation of the hydrocarbon chains. The downward band at 1124 cm(-1) assigned to the nu(as)(C-O-C) mode indicates that the corresponding transition dipole moment is oriented perpendicular to the water surface.     

On the adsorption of extended viologens at the electrode|electrolyte interface

Extended viologens represent a group of organic molecules intended to be used as molecular wires in molecular electronic devices. Adsorption properties of a novel series of extended viologen molecules were studied at the mercury electrode|electrolyte interface. These compounds form compact monolayers around the potential of zero charge with a constant differential capacitance value of 2.5 ± 0.2 μF cm(-2) independent of temperature, length of the molecule, and its bulk concentration. At more negative potentials their reduction in the adsorbed state takes place. We showed that the adsorption process is diffusion controlled and time needed to fully cover the electrode surface is independent of the electrode potential. A modified Koryta equation was employed for the calculation of the surface concentration of the adsorbates leading to the value of 5.3 × 10(-11) mol cm(-2) for the shortest wire and to 1.6 × 10(-11) mol cm(-2) for the longest one. Based on the space filling model and the differential capacitance value in the compact film region, it was postulated that these molecules lay flat on the electrode surface.     

Cationic vesicles consisting of 1,2-dioleoyl-3-trimethylammonium propane (DOTAP) and phosphatidylcholines and their interaction with erythrocyte membrane

We studied the formation and stability of vesicles consisting of 1,2-dioleoyl-3-trimethylammonium propane (DOTAP) and phosphatidylcholines by electron spin resonance (ESR) analysis and observation of their hemolytic activities. In contrast with previous findings on dimethyldialkylammoniums, DOTAP formed vesicles at 37 degrees C with phosphatidylcholines containing either saturated acyl chains such as dimyristoylphosphatidylcholine (DMPC) or unsaturated acyl chains such as dilinoleoylphosphatidylcholine (DLPC). Phosphatidylcholines made the bilayer more rigid and significantly reduced the hemolytic activity of DOTAP. In the presence of equimolar concentration of DOTAP and phosphatidylcholines, formation of tightly aggregated structures of several erythrocytes was observed, as previously reported for the vesicles containing dimethyldipalmitylammonium. These findings indicate that DOTAP vesicles were stabilized by phosphatidylcholines with either saturated acyl chains or unsaturated acyl chains, and the interaction with the lipid bilayer of biological membranes as cationic vesicles became prominent with minimal membrane damage by DOTAP monomers.