Copper halide-bridged ruthenium telluride carbonyl complexes: discovery of the semiconducting cluster chain polymer {[PPh4]2[Te2Ru4(CO)10Cu4Br2Cl2].THF}infinity

A new series of Te-Ru-Cu carbonyl complexes was prepared by the reaction of K(2)TeO(3) with [Ru(3)(CO)(12)] in MeOH followed by treatment with PPh(4)X (X=Br, Cl) and [Cu(MeCN)(4)]BF(4) or CuX (X=Br, Cl) in MeCN. When the reaction mixture of K(2)TeO(3) and [Ru(3)(CO)(12)] was first treated with PPh(4)X followed by the addition of [Cu(MeCN)(4)]BF(4), doubly CuX-bridged Te(2)Ru(4)-based octahedral clusters [PPh(4)](2)[Te(2)Ru(4)(CO)(10)Cu(2)X(2)] (X=Br, [PPh(4)](2)[1]; X=Cl, [PPh(4)](2)[2]) were obtained. When the reaction mixture of K(2)TeO(3) and [Ru(3)(CO)(12)] was treated with PPh(4)X (X=Br, Cl) followed by the addition of CuX (X=Br, Cl), three different types of CuX-bridged Te-Ru carbonyl clusters were obtained. While the addition of PPh(4)Br or PPh(4)Cl followed by CuBr produced the doubly CuBr-bridged cluster 1, the addition of PPh(4)Cl followed by CuCl led to the formation of the Cu(4)Cl(2)-bridged bis-TeRu(5)-based octahedral cluster compound [PPh(4)](2)[{TeRu(5)(CO)(14)}(2)Cu(4)Cl(2)] ([PPh(4)](2)[3]). On the other hand, when the reaction mixture of K(2)TeO(3) and [Ru(3)(CO)(12)] was treated with PPh(4)Br followed by the addition of CuCl, the Cu(Br)CuCl-bridged Te(2)Ru(4)-based octahedral cluster chain polymer {[PPh(4)](2)(Te(2)Ru(4)(CO)(10)Cu(4)Br(2)Cl(2)).THF}(infinity) ({[PPh(4)](2)[4].THF}(infinity)) was produced. The chain polymer {[PPh(4)](2)[4].THF}(infinity) is the first ternary Te-Ru-Cu cluster and shows semiconducting behavior with a small energy gap of about 0.37 eV. It can be rationalized as resulting from aggregation of doubly CuX-bridged clusters 1 and 2 with two equivalents of CuCl or CuBr, respectively. The nature of clusters 1-4 and the formation and semiconducting properties of the polymer of 4 were further examined by molecular orbital calculations at the B3LYP level of density functional theory.     

From simple to complex: topological evolution and luminescence variation in a copper(I) pyridylpyrazolate system tuned via second ligating spacers

By systematically varying the geometric length and electronic properties of the second ligating ligands of halogen (Cl(-), Br(-), and I(-)) and pseudohalogen (CN(-), SCN(-), and N(3)(-)) anions, we synthesized 11 isomeric/isostructural copper(I) complexes: [Cu(2)(L3-3)I](n) (1), [Cu(2)(L4-4)Br](n) (2-Br), [Cu(2)(L4-4)Cl](n) (2-Cl), [Cu(2)(L3-4)(CN)](n) (3), [Cu(2)(L3-3)(CN)](n) (4), [Cu(3)(L4-4)(CN)(2)](n) (5), {[Cu(2)(L4-4)Br](2)·CuBr}(n) (6-Br), {[Cu(2)(L4-4)Cl](2)·CuCl}(n) (6-Cl), [Cu(2)(L4-4)(SCN)](n) (7α-SCN), [Cu(2)(L4-4)(SCN)](n) (7β-SCN), and [Cu(2)(L4-4)(N(3))](n) (7α-N(3)). These structures are based on a series of isomeric pyridylpyrazole ligands, namely, 3,5-bis(3-pyridyl)-1H-pyrazole (HL3-3), 3-(3-pyridyl)-5-(4-pyridyl)-1H-pyrazole (HL3-4), and 3,5-bis(4-pyridyl)-1H-pyrazole (HL4-4), and their structural features range from 1-D (1), 2-D (2), and 3-D noninterpenetration (3), to 3-D 2-fold interpenetration (4 and 5), to 3-D self-catenation (6 and 7), exhibiting a trend from simple to complex with dimension expansion and an interpenetrating degree increase. The five most complex structures (6 and 7) with self-catenated networks are based on 2-fold interpenetrated networks linked via appropriate second ligating spacers (Cl(-), Br(-), SCN(-), and N(3)(-)), representing a strategy to construct self-catenated coordination polymers through cross-linking interpenetrated frameworks. Moreover, these complexes exhibit strong photoluminescence, which is mainly ascribed to Cu(I)-related charge transfers (MLCT, MC, and MMLCT) regulated by the electronic properties of halogen or pseudohalogen. The topological evolution and luminescence variation presented in this work open an avenue to understanding the luminescence origin and the structure-property relationship of luminescent coordination polymers.     

Mononuclear and binuclear copper(I) complexes ligated by bis(3,5-diisopropyl-1-pyrazolyl)methane: insight into the fundamental coordination chemistry of three-coordinate copper(I) complexes with a neutral coligand

By using the neutral bidentate nitrogen-containing ligand, bis(3,5-diisopropyl-1-pyrazolyl)methane (L1' '), the copper(I) complexes [Cu(L1' ')2](CuCl2) (1CuCl2), [Cu(L1' ')2](ClO4) (1ClO4), [Cu(L1' ')]2(ClO4)2 (2ClO4), [Cu(L1' ')]2(BF4)2 (2BF4), [Cu(L1' ')(NCMe)](PF6) (3PF6), [Cu(L1' ')(PPh3)](ClO4) (4ClO4), [Cu(L1' ')(PPh3)](PF6) (4PF6), [{Cu(L1' ')(CO)}2(mu-ClO4)](ClO4) (5ClO4), and the copper(II) complexes [{Cu(L1' ')}2(mu-OH)2(mu-ClO4)2] (6), and [Cu(L1' ')Cl2] (7) were systematically synthesized and fully characterized by X-ray crystallography and by IR and 1H NMR spectroscopy. In the case of copper(II), ESR spectroscopy was also applied. In comparison with the related neutral tridentate ligand L1', bis-chelated copper(I) complexes and binuclear linear-coordinated copper(I) complexes are easy to obtain with L1' ', like 1CuCl2, 1ClO4, 2ClO4, and 2BF4. Importantly, stronger and bulkier ligands such as acetonitrile (3PF6) and especially triphenylphosphine (4ClO4 and 4PF6) generate three-coordinate structures with a trigonal-planar geometry. Surprisingly, for the smaller ligand carbon monoxide, a mononuclear three-coordinate structure is very unstable, leading to the formation of a binuclear complex (5ClO4) with one bridging perchlorate anion, such that the copper(I) centers are four-coordinate. The same tendency is observed for the copper(II) bis(mu-hydroxo) compounds 6, which is additionally bridged by two perchlorate anions. Both copper(II) complexes 6 and 7 were obtained by molecular O2 oxidation of the corresponding copper(I) complexes. A comparison of the new copper(I) triphenylphosphine complexes 4ClO4 and 4PF6 with corresponding species obtained with the related tridentate ligands L1' and L1 (8ClO4 and 9, respectively) reveals surprisingly small differences in their spectroscopic properties. Density functional theory (DFT) calculations are used to shed light on the differences in bonding in these compounds and the spectral assignments. Finally, the reactivity of the different bis(pyrazolyl)methane complexes obtained here toward PPh3, CO, and O2 is discussed.     

Two enantiomers of [Cu(3)(mnt)(3)](3-) as ligands to Cu(i) or Ag(i) in building [Cu(6)M(2)(mnt)(6)](4-) complexes (M = Cu or Ag) with the reversal of the reaction by X(-) (X = Cl, Br)

Two enantiomers of [Bu(4)N](3)[Cu(3)(mnt)(3)] () formed by Na(2)(mnt) (mnt = maleonitriledithiolate, [S(2)C(2)(CN)(2)](2-)) and CuCl in a 1 : 1 molar ratio react further with MCl (M = Cu or Ag) involving both the enantiomers of to produce the larger complex, [Bu(4)N](4)[Cu(6)M(2)(mnt)(6)] (M = Cu (2), Ag (3)) from which the capped Cu(+) or Ag(+) ion can readily be removed by Bu(4)NX (X = Cl, Br), reverting or back to . Such reversal does not work with non-coordinating anions like BF(4)(-), ClO(4)(-) and PF(6)(-).     

Di- and tetranuclear copper(I) complexes containing phenylaminobis(phosphonite), PhN{P(OC6H4OMe-o)2}2, and their reactivity toward bipyridyl ligands

The aminobis(phosphonite) PhN(P(OC6H4OMe-o)2)2 (PNP; 1) reacts with 2 equiv of CuI to give a binuclear complex, Cu2(mu2-I)2(NCCH3)2(mu-PNP) (2), whereas similar reactions with CuCl and CuBr furnish tetranuclear "ladder"-type complexes, Cu4(mu2-X)2(mu3-X)2(mu-PNP)2 (3, X = Cl; 4, X = Br), in excellent yield. The complex 2 when heated under vacuum turns into the tetranuclear complex 5 in a reversible fashion. Similarly, the complexes 3 and 4 on dissolution in CH3CN dissociate reversibly into the corresponding binuclear complexes from which the tetrameric complexes can be readily regenerated. Treatment of 2 with excess of pyridine produces the heterosubstituted derivative, Cu2(mu2-I)2(C5H5N)2(mu-PNP) (6). The interaction of 2 with 2,2'-bipyridine in 1:1 and 1:2 ratios produces the mono- and disubstituted derivatives, Cu2(mu2-I)I(C10H8N2)(mu-PNP) (7) and [Cu2(mu2-I)(C10H8N2)2(mu-PNP)]I (8), respectively. The chloro and bromo analogues of 7 are prepared by treating the tetranuclear derivatives 3 and 4 with 2,2'-bipyridine. Reaction of 2 with 4,4'-bipyridine in the presence of AgOTf gives the cationic complex [Cu4(NCCH3)4(C10H8N2)2(mu-PNP)2](OTf)4 (9), whereas the complex [Cu2(NCCH3)2(mu-PNP)2](OTf)2 (10) was obtained from the reaction of 2 with 1 equiv of 1 and AgOTf. The reactions of 3 and 4 with 2 equiv of 4,4'-bipyridine in acetonitrile afford one-dimensional copper(I) coordination polymers [Cu2(mu2-X)2(mu-PNP)(C10H8N2)]n (13, X = Cl; 14, X = Br). The molecular structures of 2-4, 6-8, 12, and 14 are confirmed by X-ray crystallography.     

Helicates, boxes, and polymers from simple pyridine-alcohol ligands: the impact of the identity of the transition metal ion

The coordination chemistry of 6-methylpyridine-2-methanol (1) and enantiopure (R)-1-(6-methylpyridin-2-yl)ethanol (2) with a range of divalent first-row transition metal salts has been investigated in an effort to determine whether hydrogen-bonded helicates will form, as observed for cobalt(II) salts. Hydrogen-bonded helicates, [Cu2(1)2(1-H)2X2] (X = Cl, Br), were only observed upon combining 1 with CuCl2 and CuBr2 in MeOH solution. Other metal salts led to alternative products, viz. Cu(ClO4)2 in the presence of base gives [Cu2(1)2(1-H)2](ClO4)2, ZnCl2 and ZnBr2 give the 1-D helical coordination polymers [Zn(1-H)Cl]infinity and [Zn(1-H)Br]infinity, a mixture of NiCl2 and Ni(OAc)2 produces the [Ni4(1-H)4Cl2(OAc)2(MeOH)2] cubane, NiCl2 leads to the [Ni4(1-H)4Cl4(MeOH)4] cubane, while MnCl2 gives the known cubane [Mn4(1-H)6Cl4]. The reaction of 2 with CuCl2 produces the mononuclear complex Lambda-[Cu(2)2Cl]Cl, while reaction with CuBr2 leads to a dimer, Lambda,Lambda-[Cu2(2)3(2-H)Br2]Br, which is held together by a single hydrogen bond between the monomeric subunits. The solid-state CD spectra of these latter complexes were recorded and found to be very similar. The temperature-dependent magnetic behavior of [Cu2(1)2(1-H)2X2] (X = Cl, Br), [Cu2(1)2(1-H)2](ClO4)2, [Cu2(2)3(2-H)Br2]Br, and [Ni4(1-H)4Cl2(OAc)2(MeOH)2] was investigated. Weak antiferromagnetic coupling between the copper(II) centers is mediated by the hydrogen bonds in the [Cu2(1)2(1-H)2X2] (X = Cl, Br) complexes.     

Stereochemical consequences of threefold symmetry in asymmetric catalysis: distorting C3 Chiral 1,1,1-tris(oxazolinyl)ethanes ("trisox") in CuII Lewis acid catalysts

The underlying conceptual differences in exploiting two- and threefold rotational symmetry in the design of chiral ligands for asymmetric catalysis have been addressed in a comparative study of the catalytic performance of bisoxazoline (BOX) and tris(oxazolinyl)ethanes (trisox) containing copper(II) Lewis acid catalysts. The differences become apparent in constructing new catalysts by systematically "deforming" the stereodirecting ligand by inverting chiral centres or replacing chiral by achiral oxazolines. The catalytic alpha-amination of ethyl 2-methylacetoacetate with dibenzyl azodicaboxylate, which occurs with high enantioselectivity for both Ph(2)-BOX and Ph(3)-trisox copper catalysts, has been employed as the test reaction. In the trisox-copper complex [Cu(II)(iPr(3)-trisox)(kappa(2)-O,O'-MeCOCHCOOEt)](+)[BF(4)](-) (1), which was characterised by X-ray diffraction, two of the oxazoline groups are coordinated to the central copper atom, whilst the third oxazoline unit is dangling with the N-donor pointing away from the metal centre. A similar arrangement is found for the stereochemically "mixed" C(1)-trisox complex [Cu(II){(Ph(3)-trisox(R,S,S)}(kappa(2)-O,O'-MeCOCHCOOEt)(H(2)O)](+)[ClO(4)](-) (2), in which the phenyl substituents adopt a first coordination sphere meso arrangement. The almost identical selectivity of the Ph(3)-trisox(R,R,R)- and Ph(2)-BOX(R,R)-derived catalysts is as expected from the proposed model of the active catalyst based on a partially decoordinated podand. The behaviour of the "desymmetrised" trisox-Cu catalysts may be rationalised in terms of a general steady-state kinetic model for the three possible active bisoxazoline-copper species, which are expected to be in rapid exchange with each other in solution. This applies to both the trisox derivatives with stereochemically inverted and achiral oxazoline rings. The study underscores previous observations of superior performance of the catalysts bearing C(3)-chiral stereodirecting ligands as compared to systems of lower symmetry.     

A complete series of copper(II) halide complexes (X = F, Cl, Br, I) with a novel Cu(II)-C(sp3) bond

A complete series of copper(ii) halide complexes [CuX(tptm)](X = F (), Cl (), Br (), I (); tptm = tris(2-pyridylthio)methyl) with a novel Cu(II)-C(sp(3)) bond has been prepared by the reactions of [Cu(tptm)(CH(3)CN)]PF(6)(.PF(6)) with corresponding halide sources of KF or n-Bu(4)NX (X = Cl, Br, I), and the trigonal bipyramidal structures have been confirmed by X-ray crystallography and/or EPR spectroscopy. The iodide complex easily liberates the iodide anion in acetonitrile forming the acetonitrile complex as a result. The EPR spectra of the complexes showed several superhyperfine structures that strongly indicated the presence of spin density on the halide ligands through the Cu-X bond. The results of DFT calculations essentially matched with the X-ray crystallographic and the EPR spectroscopic results. Cyclic voltammetry revealed a quasi-reversible reduction wave for Cu(II)/Cu(I) indicating a trigonal pyramidal coordination for Cu(I) states. A coincidence of the redox potential for all [CuX(tptm)](0/+) processes indicates that the main oxidation site in each complex is the tptm ligand.     

Copper-selenium interactions: influence of alkane spacer and halide anion in the synthesis of unusual polynuclear copper(I) complexes with bis(diphenylselenophosphinyl)alkanes

The reactions of copper(I) halides with bis(diphenylselenophosphinyl)alkanes, namely Ph(2)P(Se)-(CH(2))(n)-P(Se)Ph(2) [n = 1-4], in acetonitrile are described. The ligand 1,3-bis(diphenylselenophosphinyl)propane [dppp-Se,Se] with copper(I) bromide and copper(I) iodide formed two unusual infinite coordination polymers, namely [Cu(2)Br(2)(mu(2)-dppp-Se-Se)(2)](n), 1, and [Cu(3)I(3)(mu(2)-dppp-Se,Se)(2)](n), 2. Selenium bridged dinuclear complexes, [Cu(2)Br(2)((mu(3)-dppm-Se,Se)(2)], 3, and [Cu(2)I(2)(dppm-Se,Se)(2)], 4, were formed using 1,1-bis(diphenylselenophosphinyl)methane [dppm-Se,Se]. Similarly, 1,2-bis(diphenylselenophosphinyl)ethane [dppe-Se,Se] and 1,4-bis(diphenylselenophosphinyl)butane [dppb-Se,Se] formed complexes, Cu(2)Br(2)(dppe-Se,Se)(2), 5, and Cu(2)I(2)(dppb-Se,Se), 6. These have been characterized with the help of analytical data, infrared spectroscopy, and, for compounds 1-3, X-ray crystallography. Compound 2, [Cu(3)I(3(dppp-Se,Se)(2)](n), has two dppp-Se,Se molecules coordinating to two copper(I) atoms of the dinuclear Cu(mu-I)(2)Cu core in unidentate fashion, with two pendant Ph(2)P(Se)- moieties in trans orientation, and one of these groups is coordinated to another copper(I) iodide moiety, thus forming the repeat unit (A), -CuI(mu-dppp-Se,Se)Cu(mu-I)(2)Cu(mu-dppp-Se,Se)-. This repeat unit (A) combined with another unit, and this process continued and finally formed the infinite polymer 2. In this polymer, the mononuclear CuISe(2) and dinuclear Cu(2)(mu-I)(2)Se(2) cores have distorted trigonal planar geometries around Cu centers. The Cu(2)...Cu(2)* separation of 2.643(1) A is less than twice the van der Waals radius of Cu, 2.80 A. The structure of polymer 1 is similar to that of 2, except that it has only mononuclear trigonal planar CuBrSe(2) units bridged by Se atoms of dppp-Se,Se ligand, and the repeat unit is -CuBr(mu(2)-dppp-Se,Se)CuBr(mu(2)(-)dppp-Se,Se)-. The formation of zigzag one-dimensional copper(I) coordination polymers (1 and 2), with trigonal planar copper(I) centers, provides the first examples of this type in tertiary phosphine chalcogenide chemistry. In contrast, the decrease in methylene chain length, from -(CH(2))(3)- to -(CH(2))-, resulted in chelation by the dppm-Se,Se ligand, forming CuBr(dppm-Se,Se), which dimerized via Se donor atoms and formed [Cu(2)Br(2)(mu(3)-dppm-Se,Se)(2)], 3. It has a relatively less common central kernel, Cu(mu-Se)(2)Cu, and each Cu atom is further bonded to one terminal Br and one Se atoms, and the geometry around each Cu center is distorted tetrahedral (bond angles, ca. 101-121 degrees).     

Electrospray ionization mass spectrometric study of Cu(I) and Cu(II) bipyridine complexes employed in atom transfer radical polymerization

We report an electrospray ionization mass spectrometric study of Cu(I) and Cu(II) bipyridine complexes employed in atom transfer radical polymerization. Mass spectra of Cu(I)Br complexed with 2 equiv. of 4,4'-di(5-nonyl)-2,2'-bipyridine (dNbpy) in toluene, methyl acrylate or styrene showed the presence of [Cu(I)(dNbpy)(2)](+) cation and [Cu(I)Br(2)](-) anion. For the Cu(II)Br(2)/2dNbpy system, [Cu(II)(dNbpy)(2)Br](+), [Cu(II)(dNbpy)Br](+), [Cu(I)Br(2)](-), [Cu(II)Br(3)](-) and [Cu(II)(dNbpy)Br(3)](-) species were observed. In addition, for mixed Cu(I)Br/2dNbpy and Cu(II)Br(2)/2dNbpy systems, the negative ion mode showed only the presence of [Cu(I)Br(2)](-) anions, which are potentially formed through halogen exchange between [Cu(II)Br(3)](-) and [Cu(I)(dNbpy)(2)](+). Copyright 2000 John Wiley & Sons, Ltd.     

(Ph)3PBr][Br7], [(Bz)(Ph)3P]2[Br8], [(n-Bu)3MeN]2[Br20], [C4MPyr]2[Br20], and [(Ph)3PCl]2[Cl2I14]: extending the horizon of polyhalides via synthesis in ionic liquids

The five polyhalides [(Ph)(3)PBr][Br(7)], [(Bz)(Ph)(3)P](2)[Br(8)], [(n-Bu)(3)MeN](2)[Br(20)], [C(4)MPyr](2)[Br(20)] ([C(4)MPyr] = N-butyl-N-methylpyrrolidinium), and [(Ph)(3)PCl](2)[Cl(2)I(14)] were prepared by the reaction of dibromine and iodine monochloride in ionic liquids. The compounds [(Ph)(3)PBr][Br(7)] and [(Bz)(Ph)(3)P](2)[Br(8)] contain discrete pyramidal [Br(7)](-) and Z-shaped [Br(8)](2-) polybromide anions. [(n-Bu)(3)MeN](2)[Br(20)] and [C(4)MPyr](2)[Br(20)] exhibit new infinite two- and three-dimensional polybromide networks and contain the highest percentage of dibromine ever observed in a compound. [(Ph)(3)PCl](2)[Cl(2)I(14)] also consists of a three-dimensional network and is the first example of an infinite polyiodine chloride. All compounds were obtained from ionic liquids as the solvent that, on the one hand, guarantees for a high stability against strongly oxidizing Br(2) and ICl and that, on the other hand, reduces the high volatility of the molecular halogens.     

An unusual ligand in copper chemistry: coordination oligomers and polymers containing the [[CpMo(CO)2]2(mu,eta2-Sb2)] cluster

The coordination behavior of [[CpMo(CO)(2)}(2)(mu,eta(2)-Sb(2))] (1; Cp = cyclopentadiene) toward Cu(I) was investigated. Its reaction with CuX (X = Br, Cl, and I) produced oligomers or polymers of the general formula [[CpMo(CO)(2)](2)(mu,eta(2)-Sb(2))(mu-CuX)](n). While 2 (X = Cl, n = 2) and 3 (X = Br, n = 2) proved to be halogen-bridged dimers in both solution and solid state, the molecules of 4 (X = I, n = infinity) self-assembled in the crystal forming a linear polymer with a Cu-I skeleton supported by Sb-Cu bonds. The reaction of 1 with Cu[GaCl(4)] resulted in the formation of the ionic complex [[CpMo(CO)(2)](2)(mu,eta(2)-Sb(2))](4)Cu(2)[GaCl(4)](2) (5). Its dication contains four [[CpMo(CO)(2)](2)(mu,eta(2)-Sb(2))] ligands arranged around a Cu-Cu dumbbell. All new compounds were characterized using IR, electrospray ionization mass spectrometry, (1)H NMR, elemental analysis, and single-crystal X-ray diffraction. The ligand was oxidized by both silver(I) and copper(II), and a cyclovoltammetric study revealed that 1 suffered irreversible reduction and oxidation in a dichloromethane solution at -2.04 and 0.10 V, respectively, versus ferrocene.     

Crystal chemistry of the 4,4'-dimethyl-2,2'bipyridine/copper bromide system

The reaction of 4,4'-dimethyl-2,2-bipyridine (henceforth dmbp) with copper(I) and/or copper(II) bromide under a wide variety of conditions has led to the isolation of 10 different crystalline materials. These include one Cu(I) salt, [Cu(dmbp)(2)]Br (a distorted tetrahedral Cu species and a lattice Br(-) ion); two mixed valence Cu(I,II) compounds, [Cu(dmbp)(2)Br][CuBr(2)] (discrete 5-coordinated Cu(II) and linear Cu(I) species) and Cu(dmbp)(2)BrCu(2)Br(3) (linked 5-coordinate Cu(II) and trigonal planar Cu(I) species); and seven Cu(II) compounds, (dmbp)CuBr(2) (stacked planar monomers), [(dmbp)CuBr(2)](2)(five coordinate bibridged dimers), (dmbp)Cu(2)Br(4) (stacked planar bibridged dimers), (dmbp)CuBr(2)(DMSO) (five coordinate monomers), [Cu(dmbp)(2)Br]OH.5(1)/(2)H(2)O and [Cu(dmbp)(2)Br](Br/OH).5(1)/(2)H(2)O (five coordinate monomers), and (dmbpH(2))CuBr(4).H(2)O (distorted tetrahedral monomers). The crystal structure determinations of these materials are reported. A common thread in their structural chemistry is the supramolecular architecture developed through interdigitation of the dmbp rings on neighboring molecular species. The interdigitation leads to layer structures in many of the materials. The distances between the interdigitated dmbp rings are in the range 3.4-3.7 A. The Cu(dmbp)(2)Br(+) species exhibits an exceptionally large distortion from tetrahedral geometry due to deviation of the dihedral angle between the mean planes of the Cu(dmbp) fragments from 90 degrees. The Cu(dmbp)(2)Br(+) cations have distorted trigonal bipyramidal geometry, the Br(-) ion occupying an equatorial position. The length of the Cu-Br bond in the Cu(dmbp)(2)Br(+) species is correlated with the change in dihedral angle between the planes of the two dmbp ligands. The mono-dmbp complexes show a greater variation in coordination geometry for the Cu(II) species, including distorted trigonal bipyramidal and augmented square planar 4 + 1 and 4 + 2 coordination.     

Mononuclear and binuclear sandwich copper(II) complexes with poly(pyrazolyl)borate ligands: syntheses, structures and properties

A series of Cu(II) complexes Cu(2)[micro-pz](2)[HB(pz)(3)](2) (1), Cu[H(2)B(pz)(2)](2) (2), Cu[HB(pz)(3)](2) (3), Cu[HB(pz(Me2))(3)](2) (4), Cu[B(pz)(4)](2) (5) (pz=pyrazole), have been synthesized and characterized by elemental analysis, IR, UV-vis, X-ray diffraction, thermal analysis and theoretical analysis. The IR spectra give the Cu-N vibration modes at 322, 366, 344, 387, and 380 cm(-1) in complexes 1-5, respectively. The UV spectra show all the complexes have same UV absorption at 232 nm; there is another band at 332 nm for complexes 1, 2 and 4, while for complexes 3 and 5, the bands are at 272 and 308 nm, respectively. Complex 1 has a binuclear structure in which two pyrazole ligands bridge two Cu-Tp units. In 2-5, the Cu(II) centers are coordinated with dihydrobis(pyrazolyl)borate (Bp), hydrotris(pyrazolyl)borate (Tp), hydrotris(3,5-Me2pyrazolyl)borate (Tp'), tetrakis(pyrazolyl)borate (Tkp) respectively to form a mononuclear structure. The results of thermal analysis for complexes 1-5 are discussed too.     

Copper complexes of mono- and ditopic [(methylthio)methyl]borates: missing links and linked systems en route to copper enzyme models

TMEDA-free (TMEDA: tetramethylethylenediamine) LiCH(2)SMe is a suitable reagent for the selective introduction of (methylthio)methyl groups into PhBBr(2) and its p-silylated derivative Me(3)Si--C(6)H(4)--BBr(2). The resulting compounds, R*--C(6)H(4)--B(Br)(CH(2)SMe) (R*=H: 2; R*=SiMe(3): 7) and PhB(CH(2)SMe)(2) (3), form cyclic dimers through B--S adduct bonds in solution and in the solid state. Compounds 2 and 3 have successfully been used for preparing the (N(2)S) scorpionate [PhBpz(2)(CH(2)SMe)](-) ([5](-)) (pz: pyrazol-1-yl) and the (NS(2)) scorpionate [PhBpz(CH(2)SMe)(2)](-), respectively. Compound 7 proved to be an excellent building block for the heteroditopic poly(pyrazol-1-yl)borate p-[pz(3)B--C(6)H(4)--Bpz(2)(CH(2)SMe)](2-) ([10](2-)) that mimics the two ligation sites of the copper enzymes peptidylglycine alpha-hydroxylating monooxygenase and dopamine beta-monooxygenase. Treatment of the monotopic tripod [5](-) with CuCl and CuBr(2) results in the formation of complexes K[Cu(5)(2)] and [Cu(5)(2)]. An X-ray crystallography study of K[Cu(5)(2)] revealed a tetrahedral (N(2)S(2)) coordination environment for the Cu(I) ion, whereas the Cu(II) ion of [Cu(5)(2)] possesses a square-pyramidal (N(4)S) ligand sphere (S-atom in the axial position). The remarkable redox properties of K[Cu(5)(2)] and [Cu(5)(2)] have been assessed by cyclic voltammetry and quantum chemical calculations. The reaction of K[Cu(5)(2)] with dry air leads to the Cu(II) species [Cu(5)(2)] and to a tetranuclear Cu(II) complex featuring [PhB(O)pz(2)](2-) ligands. Addition of CuCl to K(2)[10] gives the complex K(3)[Cu(10)(2)] containing two ligand molecules per Cu(I) center. The Cu(I) ion binds to both heteroscorpionate moieties and thereby establishes a coordination environment similar to that of the Cu(I) ion in K[Cu(5)(2)].     

Electrical conductivity and luminescence in coordination polymers based on copper(I)-halides and sulfur-pyrimidine ligands

The solvothermal reactions between pyrimidinedisulfide (pym(2)S(2)) and CuI or CuBr(2) in CH(2)Cl(2):CH(3)CN lead to the formation of [Cu(11)I(7)(pymS)(4)](n) (pymSH = pyrimidine-2(1H)-thione) (1) and the dimer [Cu(II)(μ-Br)(Br)L](2) (L = 2-(pyrimidin-2-ylamino)-1,3-thiazole-4-carbaldehyde) (2). In the later reaction, there is an in situ S-S, S-C(sp(2)), and C(sp(2))-N multiple bond cleavage of the pyrimidinedisulfide resulting in the formation of 2-(pyrimidin-2-ylamino)-1,3-thiazole-4-carbaldehyde. Interestingly, similar reactions carried out just with a change in the solvent (H(2)O:CH(3)CN instead of CH(2)Cl(2):CH(3)CN) give rise to the formation of coordination polymers with rather different architectures. Thus, the reaction between pym(2)S(2) and CuI leads to the formation of [Cu(3)I(pymS)(2)](n) (3) and [CuI(pym(2)S(3))] (pym(2)S(3) = pyrimidiltrisulfide) (4), while [Cu(3)Br(pymS)(2)](n) (5) is isolated in the reaction with CuBr(2). Finally, the solvothermal reactions between CuI and pyrimidine-2-thione (pymSH) in CH(2)Cl(2):CH(3)CN at different ratios, 1:1 or 2:1, give the polymers [Cu(2)I(2)(pymSH)(2)](n) (6) and [Cu(2)I(2)(pymSH)](n) (7), respectively. The structure of the new compounds has been determined by X-ray diffraction. The studies of the physical properties of the novel coordination polymers reveal that compounds 3 and 5 present excellent electrical conductivity values at room temperature, while compounds 1, 3, and 5-7 show luminescent strong red emission at room temperature.     

A ternary Cu-Sn-S cluster complex--(NBu4)[Cu19S28(SnPh)12(PEt2Ph)3

Reaction of a mixture of CuCl, PhSnCl(3) and PEt(2)Ph with S(SiMe(3))(2) in THF resulted initially in the unexpected synthesis of the ionic, mixed copper-tin sulfide cluster [Li(thf)(4)][Cu(19)S(28)(SnPh)(12)(PEt(2)Ph)(3)] in low yields. However, by adding NBu(4)Cl to the reaction solutions we were able to selectively synthesize the structurally similar cluster ion in (NBu(4))[Cu(19)S(28)(SnPh)(12)(PEt(2)Ph)(3)]. Structural characterization by single crystal X-ray analysis reveals that the cluster anions consist in principle of a copper sulfide core decorated by PhSn(3+) groups. Although additional phosphine ligands are attached to copper atoms the clusters possess an open 'Cu(3)S(3)' face mostly protected by the [Li(thf)(4)](+) and (NBu(4))(+) counterions in the crystal structure. The cluster (NBu(4))[Cu(19)S(28)(SnPh)(12)(PEt(2)Ph)(3)] displays near-infrared, temperature-dependent photoluminescence at ～820-930 nm in the solid state, which is especially bright at temperatures below ～100 K.     

Tri- and tetracoordinate copper(I) complexes bearing bidentate soft/hard SN and SeN ligands based on 2-aminopyridine

The coordination properties of the EN ligands N-(2-pyridinyl)amino-diphenylphosphine sulfide, N-(2-pyridinyl)amino-diisopropylphosphine sulfide, N-(2-pyridinyl)amino-diphenylphosphine selenide, N-(2-pyridinyl)amino-diisopropylphosphine selenide towards copper(I) precursors CuX (X = Br, I), [Cu(IPr)Cl] (IPr = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene), and [Cu(CH(3)CN)(4)]PF(6) were studied. Treatment of CuX with EN ligands resulted in the formation of tricoordinate complexes of the type [Cu(κ(2)(E,N)-EN)X]. The reaction of [Cu(IPr)Cl] with EN ligands, followed by halide abstraction with AgSbF(6), afforded cationic tricoordinate complexes [Cu(κ(2)(S,N)-EN)(IPr)](+), while the reaction of [Cu(CH(3)CN)(4)](+) with two equivalents of EN ligands yielded tetrahedral complexes [Cu(κ(2)(E,N)-EN)(2)](+). Halide removal from [Cu(κ(2)(S,N)-SN)I] with silver salts in the presence of L = CH(3)CN and CNtBu afforded dinuclear complexes of the type [Cu(κ(2)(S,N),μ(S)-SN)(L)](2)(2+) containing bridging SN ligands. With the terminal alkynes HC≡CC(6)H(4)Me and HC≡CC(6)H(4)OMe, complexes of the formula [Cu(κ(2)(S,N)-SN-iPr)(η(2)-HC≡CC(6)H(4)Me)](+) and [Cu(κ(2)(S,N)-SN-iPr)(η(2)-HC≡CC(6)H(4)OMe)](+) were obtained. The mononuclear nature of these compounds was supported by DFT calculations. Most complexes were also characterized by X-ray crystallography.     

Metal coordination and in situ S-C bond cleavage of the bis(2-pyridylthio)methane ligand

The compound [2bpytmH](2)[I(3)](2)[I(2)], which contains protonated 2bpytm, and four neutral monomeric complexes [CoCl(2)(2bpytm)]·H(2)O (1), [CoBr(2)(2bpytm)] (2), [CoI(2)(2bpytm)]·1/2H(2)O (3) and [NiBr(2)(2bpytm)]·H(2)O (4) have been obtained during a study into the reactivity of the bis(2-pyridylthio)methane (2bpytm) ligand towards cobalt(II) and nickel(II) halides. Furthermore, a cyclic dimer [CuBr(2)(2bpytm)](2) (5) and a 1D polymer [CuBr(2)(2bpytm)](n)·CH(3)CN (6) have been obtained from copper(II)/(I) bromide salts. An unprecedented S-CH(2)-S activation and cleavage in 2bpytm has been observed on using copper(II) salts with organic and voluminous inorganic anions. The cleavage of 2bpytm enabled the isolation of copper(II) complexes containing the in situ generated ligands 2-pyridinethiolate, 2-pyridinesulfenate or 2-pyridinesulfonate.     

Copper(I)/S(8) reversible reactions leading to an end-on bound dicopper(II) disulfide complex: nucleophilic reactivity and analogies to copper-dioxygen chemistry

Elemental sulfur (S8) reacts reversibly with the copper(I) complex [(TMPA')CuI](+) (1), where TMPA' is a TMPA (tris(2-pyridylmethyl)amine) analogue with a 6-CH2OCH3 substituent on one pyridyl ligand arm, affording a spectroscopically pure end-on bound disulfido-dicopper(II) complex [{(TMPA')Cu(II)}2(mu-1,2-S2(2-))](2+) (2) {nu(S-S) = 492 cm(-1); nu(Cu-S)sym = 309 cm(-1)}; by contrast, [(TMPA)Cu(I)(CH3CN)](+) (3)/S8 chemistry produces an equilibrium mixture of at least three complexes. The reaction of excess PPh3 with 2 leads to formal "release" of zerovalent sulfur and reduction of copper ion to give the corresponding complex [(TMPA')Cu(I)(PPh3)](+) (11) along with S=PPh3 as products. Dioxygen displaces the disulfur moiety from 2 to produce the end-on Cu2O2 complex, [{(TMPA')Cu(II)}2(mu-1,2-O2(2-)](2+) (9). Addition of the tetradentate ligand TMPA to 2 generates the apparently more thermodynamically stable [{(TMPA)Cu(II)}2(mu-1,2-S2(2-))](2+) (4) and expected mixture of other species. Bubbling 2 with CO leads to the formation of the carbonyl adduct [(TMPA')CuI(CO)](+) (8). Carbonylation/sulfur-release/CO-removal cycles can be repeated several times. Sulfur atom transfer from 2 also occurs in a near quantitative manner when it is treated with 2,6-dimethylphenyl isocyanide (ArNC), leading to the corresponding isothiocyanate (ArNCS) and [(TMPA')Cu(I)(CNAr)](+) (12). Complex 2 readily reacts with PhCH2Br: [{(TMPA')Cu(II)}2(mu-1,2-S(2)(2-)](2+) (2) + 2 PhCH2Br --> [{(TMPA')Cu(II)(Br)}2](2+) (6) + PhCH2SSCH2Ph. The unprecedented substrate reactivity studies reveal that end-on bound mu-1,2-disulfide-dicopper(II) complex 2 provides a nucleophilic S2(2-) moiety, in striking contrast to the electrophilic behavior of a recently described side-on bound mu-eta(2):eta(2)-disulfido-dicopper(II) complex, [{(N3)Cu(II)}(2)(mu-eta(2):eta(2)-S2(2-))](2+) (5) with tridentate N3 ligand. The investigation thus reveals striking analogies of copper/sulfur and copper/dioxygen chemistries, with regard to structure type formation and specific substrate reactivity patterns.