Chemical, structural, and thermal properties of Zn(II)-Cr(III) layered double hydroxides intercalated with sulfated and sulfonated surfactants

Zn(II)-Cr(III)-LDHs (layered double hydroxides) containing sulfated or sulfonated surfactants as the interlamellar anion were synthesized by the coprecipitation method. The syntheses were conducted under various different experimental conditions, such as the Zn : Cr ratio, pH, and aging time. In each of the prepared materials, unlike previously reported data, the interlayer anion arrangement did not change, being consistent with a perpendicular monolayer. The thermal decomposition process of the prepared materials was studied by a set of analysis methods, such as TG/DTA, TG/MS, PXRD, and FT-IR. From the results obtained it was possible to conclude that, in an air atmosphere, the anions decomposed by a partial combustion, leading to the formation of sulfide. The results also showed that sulfonated surfactants containing LDHs are much more stable than those containing sulfated surfactants. A mechanism was proposed for the thermal decomposition of such LDHs based on the experimental results.     

Thermal decomposition of crystalline Ni(II)-Cr(III) layered double hydroxide: a structural study of the segregation process

A structural study of the thermal evolution of Ni(0.69)Cr(0.31)(OH)(2)(CO(3))(0.155) x nH(2)O into NiO and tetragonal NiCr(2)O(4) is reported. The characteristic structural parameters of the two coexisting crystalline phases, as well as their relative abundance, were determined by Rietveld refinement of powder x-ray diffraction (PXRD) patterns. The results of the simulations allowed us to elucidate the mechanism of the demixing process of the oxides. It is demonstrated that nucleation of a metastable nickel chromite within the common oxygen framework of the parent Cr(III)-doped bunsenite is the initial step of the cationic redistribution. The role that trivalent cations play in the segregation of crystalline spinels is also discussed.     

Thermal evolution of V(III)-containing layered double hydroxides

A study is reported on the thermal evolution of Mg, V layered double hydroxides with interlayer carbonate anions and different Mg/V molar ratios (from 1 to 4). Decomposition in O₂ occurs at lower temperature than that in N₂; the stability of the layered structure decreases as the V content increases. Oxidation of layer V³⁺ cations occurs in the same temperature range as dehydroxylation and decarbonation. The nature of the crystalline phases formed upon calcination at high temperatures strongly depends on the Mg/V molar ratio in the initial solid.     

均匀沉淀法直接合成有机阴离子柱撑水滑石

以尿素为沉淀剂用均匀沉淀法直接合成有机阴离子柱撑水滑石(Layered Double Hydroxides，LDH)及CoAl水滑石等，并用XRD，FT—IR，TGA，TEM等分析手段对所合成的水滑石进行了表征．结果表明，尿素均匀沉淀法可以直接合成有机阴离子柱撑水滑石及CoAl水滑石等，并且可以方便地消除原料中阴离子的干扰，是合成有机阴离子柱撑水滑石及CoAl水滑石等的一个简便快速的新方法。     

Photoactive oriented films of layered double hydroxides

The treatment of nano-ordered oriented films of layered double hydroxide (LDH) with dodecyl sulfate increased the interlayer distance from 0.4 to 1.96 nm, which allowed the intercalation of 5,10,15,20-tetrakis(4-sulfonatophenyl)porphyrin (TPPS). The re-stacking of separated layers and the rebuilding of crystals oriented parallel to the surface of quartz slides was confirmed by X-ray diffraction and atomic force microscopy. The hybrid films contained homogeneously distributed porphyrin molecules with preserved photophysical properties such as fluorescence, triplet state formation, and energy transfer, thus forming singlet oxygen.     

Thermal decomposition of silylated layered double hydroxides

Anionic surfactant and silane modified layered double hydroxides (LDHs) were synthesized through an in situ coprecipitation method. The structure and morphology were characterized by XRD and TEM techniques, and their thermal decomposition processes were investigated using infrared emission spectroscopy (IES) combined with thermogravimetry (TG). The surfactant modified LDHs (H-DS) shows three diffractions located at 1–7° (2θ), while there is only one broad reflection for silane grafted LDHs (H–Si) in this region. The morphologies of the H-DS and H–Si show fibrous exfoliated layers and curved sheets, respectively. The IES spectra and TG curves indicate that alkyl chain combustion and dehydroxylation are overlapped with each other during heating from 373 to 723 K in H-DS and to 873 K in H–Si. Sulfate anion transformation process occurs at 473 K in H-DS and 523 K in H–Si. The derivant of sulfate can exist even above 1073 K. After further decomposition, the metal oxides and the new type of Si–O compounds are formed beginning at around 923 K in silane modified sample.     

Mechano-hydrothermal preparation of Li-Al-OH layered double hydroxides

A mechano-hydrothermal (MHT) method was used to synthesize Li-Al-OH layered double hydroxides (LDHs) from LiOH·H₂O, Al(OH)₃ and H₂O as starting materials. A two-step synthesis was conducted, that is, Al(OH)₃ was milled for 1 h, followed by hydrothermal treatment with LiOH·H₂O solution. Effects of the LiOH/Al(OH)₃ molar ratio (R_Li/Al) and hydrothermal temperature (T_ht) on the crystallinity, morphology, and composition of the product were examined. The resulting LDHs were characterized by X-ray diffraction, transmission electron microscopy, scanning electron microscopy, Fourier transform infrared, and elemental analyses. The results showed that pre-milling plays a key role in the LDH formation during subsequent hydrothermal treatment. The Li/Al molar ratio of the obtained LDHs keeps constant at 0.5, independent from theR_Li/Al (0.5–5.0) in the starting materials. An increase in the T_ht (20–80 °C) can enhance the crystallinity and morphology regularity of the products. The so-obtained Li-Al-OH LDHs exhibit high crystallinity and well-dispersity, which may have wider applications than the aggregate ones obtained using conventional mechanochemical and Li⁺-imbibition methods.     

Synthesis and characterisation of alkaline earth-iron(III) double hydroxides

Double hydroxides containing alkaline earth and iron(III) ions were synthesised by the co-precipitation method. The solid materials obtained were characterised by a range of instrumental methods (powder X-ray diffractometry, thermogravimetry, scanning electron microscopy, energy dispersive X-ray fluorescence spectrometry, elemental maps, and infrared spectroscopy). It was found that the Ca(II)Fe(III), Mg(II)Fe(III), and Ba(II)Fe(III) double hydroxides had layered structures, while Sr(II)Fe(III) had not. The optimum conditions for synthesis of Ca(II)Fe(III)-layered double hydroxides (materials to be used in further studies) were also elaborated.     

Stabilization of Co in layered double hydroxides (LDHs) by microwave-assisted ageing

Co-containing layered double hydroxides at different pH have been prepared, and aged following different routes. The solids prepared have been characterized by element chemical analysis, powder X-ray diffraction, thermogravimetric and differential thermal analyses (both in nitrogen and in oxygen), FT-IR and Vis-UV spectroscopies, temperature-programmed reduction and surface area assessment by nitrogen adsorption at −196 °C. The best conditions found to preserve the cobalt species in the divalent oxidation state are preparing the samples at controlled pH, and then submit them to ageing under microwave irradiation.     

Microwave-treated layered double hydroxides containing Ni and Al: The effect of added Zn

Ni containing layered double hydroxides (LDHs) have been prepared by precipitation and hydrothermally treated under microwave irradiation for different periods of time. The solids have been calcined at three temperatures corresponding to stable phases formed during thermal decomposition of LDHs. The properties of the irradiated samples and of the calcined products were studied in order to ascertain whether the ageing treatment under microwave irradiation modifies not only the properties of the layered materials, but also the properties of the calcined products. A structural and textural study was carried out by PXRD, FT-IR and Vis-UV spectroscopy, thermal analyses (DTA and TG), N₂ adsorption/desorption at −196 °C and TEM microscopy; the reducibility of the nickel species was studied as well by TPR. The results show that the microwave treatment leads to better crystallized LDHs with modified thermal stability and reducibility. In addition, the degree of crystallinity of the layered precursors and their textural properties determine the properties of their thermal decomposition products.     

Synthesis and characterization of new Mg(2)Al-paratungstate layered double hydroxides

Layered double hydroxides (LDHs, or hydrotalcites) with Mg(2+) and Al(3+) cations in the mixed metal hydroxide layer and paratungstate anions in the interlayer have been prepared. Different methods have been followed: anion exchange with Mg,Al LDHs originally containing nitrate or adipate, reconstruction of the LDH structure from a mildly calcined Mg(2)Al-CO(3) LDH, and coprecipitation. In all cases, the tungsten precursor salt was (NH(4))(10)H(2)W(12)O(42). The prepared solids have been characterized by elemental chemical analysis, powder X-ray diffraction (PXRD), FT-IR spectroscopy, thermogravimetric (TG) and differential thermal (DTA) analyses, scanning electron microscopy (SEM) with EDX (energy-dispersive X-ray analysis), and nitrogen adsorption at -196 degrees C for surface area and surface texture. Most of the synthesis methods used, especially anion exchange starting from a Mg(2)Al-NO(3) precursor at low temperature and short reaction times, lead to formation of a hydrotalcite with a gallery height of 9.8 A; increasing the reaction temperature to 70-100 degrees C and maintaining short contact times leads to a solid with a gallery height of 7.8 A. Both phases have been identified as a result of the intercalation of W(7)O(24)(6)(-) species in different orientations in the interlayer space. If the time of synthesis or the temperature is increased, a more stable phase, with a gallery height of 5.2 A corresponding to a solid with intercalated W(7)O(24)(6)(-), is formed, probably with grafting of the interlayer anion on the brucite-like layers. All systems are microporous. Calcination at 300 degrees C leads to amorphous species, and crystallized MgWO(4) is observed at 700 degrees C.     

Cyclodextrin-intercalated layered double hydroxides for fragrance release

In order to attain the controlled release of fragrance, the intercalation of cyclodextrins (CDs) and fragrance in layered double hydroxides (LDHs) was examined. Carboxymethyl-β-CDs (CMCDs) of various degrees of substitution as well as Mg–Al support were synthesized. CMCDs were intercalated into LDH by the reconstruction method. Powder X-ray diffraction, thermal gravimetric analyses and Fourier transform infrared indicated a successful intercalation of CMCDs into the LDH gallery. The retention capacities of the hybrid materials were investigated in aqueous phase and in gaseous solution by static headspace gas chromatography and multiple headspace extraction. The functionalization of the LDH with CMCD allowed the encapsulation of various organic guests and could prolong the fragrance release time in comparison to that from LDH without CMCD, which can be attributed to the inclusion of the fragrance compound in the CMCD cavity.     

Hydrophobic layered double hydroxides (LDHs): Selective adsorbents for liquid mixtures

 The external and internal surface area of the calcium aluminum double hydroxide [Ca₂Al(OH)₆] NO₃ ⋅ 2H₂O were hydrophobized by the anionic surfactants sodium dodecylsulfate and sodium dodecyl-benzene sulfonate. The adsorption behavior towards liquid mixtures (benzene/n-heptane and n-propanol/ toluene) was studied by determining the surface excess adsorption isotherms, the heats of immersion in these liquids, and the basal spacing, i.e. the expansion of the interlayer space. Both hydrophobic layered double hydroxides (LDHs) adsorbed n-hep-tane, benzene, toluene, and n-pro-panol between the layers with considerable increase of the basal spacing. Interlamellar swelling of the hydrophobizised LDHs in n-heptane was fundamentally different to the behavior of hydrophobized 2 : 1 clay minerals (smectites, vermiculites). The surface excess isotherms for benzene/ heptane mixtures were U-shaped and indicate preferential adsorption of benzene. Dodecylbenzene sulfonate double hydroxide preferentially adsorbed propanol from n-propanol/ toluene mixtures but the dodecyl-sulfate derivative adsorbed both compounds. Received: 23 January 1997 Accepted: 10 February 1997     

Incorporation of phosphorus oxyacids into layered double hydroxides

Four phosphonate anions (methyl-, ethyl-, phenyl- and benzylphosphonate) were successfully incorporated into [Cu₂Cr(OH)₆]Cl·yH₂O. It was found that two phases exist for the phenylphosphonate intercalate; one in which the anions are arranged perpendicular to the layers, and one with a tilted orientation. Systematic variation of the reaction conditions allowed the former to be isolated with phase purity, but not the latter. The solid-state ³¹P NMR data suggest that proton transfer may occur between host and guest. Some neutral guest is incorporated in the case of phenylphosphonate and benzylphosphonate, presumably owing to relatively poor solvation of these guests. Heat treatments only resulted in the formation of a covalent bond between host and guest in the case of the methylphosphonate intercalate. The intercalation of the related and redox-active phenylphosphinate into a range of LDHs is also reported. Time-resolved in situ diffraction techniques were used to both monitor and quantify the intercalation of phenylphosphonate into [Cu₂Cr(OH)₆]Cl·yH₂O and phenylphosphinate into the hexagonal form of [LiAl₂(OH)₆]Cl·yH₂O. Kinetic and mechanistic parameters have been determined from the diffraction data.     

类水滑石催化合成聚(碳酸1,4-丁二醇)酯二醇

采用共沉淀法制备了镁铝类水滑石(Mg-Al-CO3LDH)、镁锌铝类水滑石(Mg-Zn-Al-CO3LDH)和锌铝类水滑石(Zn-Al-CO3LDH),并研究了它们在碳酸二苯酯(DPC)与1,4-丁二醇(1,4-BD)酯交换合成聚碳酸酯二醇(PCDL)反应中的催化活性。在常压反应阶段,以苯酚的产率表征催化剂的活性;在减压缩聚阶段,以产品的数均分子量Mn和羟基值来表征催化剂的活性。结果发现,Zn-Al LDH具有良好的催化活性。在优化反应条件下,获得了Mn和羟基值分别为1600和70.8mg KOH/g的PCDL。     

Single-step synthesis of layered double hydroxides ultrathin nanosheets

A novel single-step approach was developed to prepare large-scale MgAl-LDHs ultrathin nanosheets. The key point of the successful realization was that we employed a high concentration of H(2)O(2). Oxygen molecules, derived from in situ decomposition of H(2)O(2), were speculated to be the decisive factor leading to complete separation of LDHs layers. The ultrathin nanosheets were characterized by XRD, TEM, AFM, FT-IR, and TG-DSC. The results indicated that the thickness of these nanosheets was about 1.44 nm, which was almost in perfect agreement with the theoretical thickness of two LDHs layers. From the TG-DSC curves, the weight loss of these exfoliated MgAl-LDHs ultrathin nanosheets at 500°C was 18.5%, which was much smaller compared to the 32.3% weight loss of unexfoliated MgAl-LDHs.     

Decarbonation of MgAl-LDHs (layered double hydroxides) using acetate-buffer/NaCl mixed solution

By using acetate-buffer (sodium acetate and acetic acid)/NaCl mixed solutions, the deintercalation of carbonate ions (CO(2-)3) was conducted on MgAl--LDHs at different Mg/Al ratios-LDH2 (LDH with Mg/Al approximately 2) and LDH3 (LDH with Mg/Al approximately 3). When only an acetate-buffer solution was used, decarbonation did not take place even if the buffer solution was made acidic enough to dissolve LDH itself; however, the addition of NaCl to the buffer solution caused deintercalation of the carbonate ions from the MgAl-LDHs and the reaction was conducted without any morphological and weight change at 25 degrees C. Under the optimum conditions, full decarbonation was attained for the two MgAl-LDHs in minutes, and the obtained LDHs contained Cl(-) in the interlayer space without incorporation of any acetate anions due to their extremely low anion selectivity of acetate ion. The allowable range for the concentration of the decarbonation solution is wide, and the change in pH due to the decarbonation reaction is slight because of the buffering effect. The decarbonation was affected by the Mg/Al ratio of the LDH; i.e., the present LDH2 was slightly more difficult to decarbonate than LDH3, probably due to the higher layer-charge density of LDH2.     

Intercalation of dodecyl sulfate into layered double hydroxides

The intercalation of sodium dodecyl sulfate and exchange of dodecyl sulfate anion into layered double hydroxides has been examined by means of X-ray diffraction, infrared and thermogravimetric procedures. Three types of derivatives were obtained having mean interlayer spacings of 26 Å, 36 Å and 47 Å, respectively. These interlayer distances did not correlate with the amount of organic incorporated between the layers but, as shown by computer simulations, depended upon the orientation of the chains within the interlamellar space. In several reactions both intercalation of neutral sodium dodecyl sulfate as well as exchange of the dodecyl anion took place. Attempts to remove the alkyl sulfate chains with dilute acid resulted in dissolution of the more basic metals producing non-stoichiometric layered products.     

Ni(III) vs. Ni(II)-thiyl radical: charge-delocalisation in a binuclear Ni(III)Ni(II)-dithiolate complex

Multi-frequency EPR spectroscopy on 61Ni-labelled samples of [Ni2(L)]3+ confirms extensive charge-delocalisation between the Ni(III) centre and thiolate donors in the Ni(II)Ni(III) complex.