Escherichia coli single-stranded DNA-binding protein,a molecular tool for improved sequence quality in pyrosequencing

Pyrosequencing is a four-enzyme bioluminometric DNA sequencing technique based on a DNA sequencing by synthesis principle. Currently, the technique is limited to analysis of short DNA sequences exemplified by single-nucleotide polymorphism analysis. In order to expand the field for pyrosequencing, the read length needs to be improved and efforts have been made to purify reaction components as well as add single-stranded DNA-binding protein (SSB) to the pyrosequencing reaction. In this study, we have performed a systematic effort to analyze the effects of SSB by comparing the pyrosequencing result of 103 independent complementary DNA (cDNA) clones. More detailed information about the cause of low quality sequences on templates with different characteristics was achieved by thorough analysis of the pyrograms. Also, real-time biosensor analysis was performed on individual cDNA clones for investigation of primer annealing and SSB binding on these templates. Results from these studies indicate that templates with high performance in pyrosequencing without SSB possess efficient primer annealing and low SSB affinity. Alternative strategies to improve the performance in pyrosequencing by increasing the primer-annealing efficiency have also been evaluated.     

Arbitrary single primer amplification of trace DNA substrates yields sequence content profiles that are discriminatory and reproducible

Single primer amplification is shown to yield a DNA profile that is reproducible when based on the sequence content of the amplicons rather than on the pattern of length polymorphism. The sequence-based profile increases in reliability with increasing numbers of cycles of amplification. This process uses an arbitrarily chosen primer and a low initial annealing temperature in order to amplify sequences from the whole metagenome present in a sample that may contain only trace DNA, and a large number of cycles to select subsets of sequences based on variable amplification efficiency. Using arrays, we demonstrate the utility and limitations of this approach for profiling the large metagenomes typical of soils and the trace DNA present in drug seizures. We suggest that this type of profiling will be most effective once next-generation sequencing and advanced sequence analysis becomes routine.     

Development and evaluation of a novel nucleic acid sequence-based amplification method using one specific primer and one degenerate primer for simultaneous detection of Salmonella Enteritidis and Salmonella Typhimurium

Salmonella Enteritidis and Salmonella Typhimurium are the most widespread causes of salmonellosis and gastrointestinal diseases worldwide. Thus, their simple and sensitive detection is significantly important in biosafety and point-of-care diagnostics. In that regard, although present nucleic acid-based attempts are mainly focused on the detection methods encompassing all Salmonella enterica members in a single reaction, serotypes other than S. Enteritidis and S. Typhimurium are clinically and epidemiologically rare to humans. Therefore, regarding high ribosomal RNA (rRNA) copy numbers in a cell, isothermal nucleic acid sequence-based amplification (NASBA) technique was employed for simple, sensitive and simultaneous detection of the bacteria. However, due to high sequence homology among 16S rRNA genes and consequently, very few specific regions, we developed a novel NASBA method called “single specific primer-NASBA or SSP-NASBA” in which the specificity of the antisense primer is sufficient to perform a specific NASBA reaction. Accordingly, we designed highly specific NASBA antisense and degenerate sense primers for a segment of 16S rRNA variable region by universal sequence alignment to simultaneously detect S. Enteritidis and S. Typhimurium. Meanwhile, the approach was successfully evaluated for various Salmonella as well as closely related non-Salmonella serovars. Specific and simultaneous detection of both bacteria was achieved with the designed primer set in a single reaction environment with a detection limit of less than 10 CFUs mL⁻¹. The developed NASBA assay should facilitate the overall process and provide a simple, fast, specific and sensitive approach for molecular diagnostics of pathogens under various circumstances, e.g. outbreaks.     

Multiplex PCR design strategy used for the simultaneous amplification of 10 Y chromosome short tandem repeat (STR) loci

The simultaneous amplification of multiple regions of a DNA template is routinely performed using the polymerase chain reaction (PCR) in a process termed multiplex PCR. A useful strategy involving the design, testing, and optimization of multiplex PCR primer mixtures will be presented. Other multiplex design protocols have focused on the testing and optimization of primers, or the use of chimeric primers. The design of primers, through the close examination of predicted DNA oligomer melting temperatures ( T(m)) and primer-dimer interactions, can reduce the amount of testing and optimization required to obtain a well-balanced set of amplicons. The testing and optimization of the multiplex PCR primer mixture constructed here revolves around varying the primer concentrations rather than testing multiple primer combinations. By solely adjusting primer concentrations, a well-balanced set of amplicons should result if the primers were designed properly. As a model system to illustrate this multiplex design protocol, a 10-loci multiplex (10plex) Y chromosome short tandem repeat (STR) assay is used.     

Simple and Sensitive Electrochemical DNA Detection of Primer Generation‐Rolling Circle Amplification

A new electrochemical sequence‐specific DNA detection platform based on primer generation‐rolling circle amplification (PG‐RCA), methylene blue (MB) redox indicator, and indium tin oxide (ITO) electrode is reported. In the presence of a specific target sequence, PG‐RCA, an isothermal DNA amplification technique, produced large amounts of amplicons in an exponential manner. In addition to the standard components, the reaction mixture contained MB, which bound with the PG‐RCA amplicons. End‐point electrochemical measurement by differential pulse voltammetry (DPV) was performed using ITO electrode. The amplicon‐bound MB resulted in a lower DPV signal than free MB due to a smaller diffusion coefficient as well as electrostatic repulsion between the negatively charged amplicon‐bound MB and ITO electrode. With simple assay design (recognition probe) and instrumentation (operating temperature at 37 °C and ITO electrode without the need for probe immobilization), this detection platform is well suited for point‐of‐care and on‐site testing. Real‐time measurement was also achieved by pretreating the ITO electrode with bovine serum albumin.     

Microarray-based amplification and detection of RNA by nucleic acid sequence based amplification

Nucleic acid sequence based amplification (NASBA) is a versatile in vitro nucleic acid amplification method. In this work, RNA amplification and labeling by NASBA and microarray analysis are combined in a one-step process. The NASBA reaction is performed in direct contact with capture probes. These probes are bound to surface-attached hydrogel spots generated at the chip surfaces by using a simple printing and UV irradiation process. Five gene expression and SNP parameters with known relevance in breast cancer diagnostics were chosen to demonstrate that multiplex NASBA-on-microarray analysis is possible. A minimum amount of 10 pg of total RNA was shown to be sufficient for the detection of the reference parameter RPS18, which demonstrates that the detection limit of the microarray-based NASBA assays theoretically allows single-cell assays to be performed.     

A new single‐step quantitative pathogen detection system: Template‐tagging followed by multiplex asymmetric PCR using common primers and CE‐SSCP

Rapid diagnosis of bacterial infection is important for patient management and appropriate therapy during the early phase of bacteria‐induced disease. Among the existing techniques for identifying microbial, CE‐SSCP combined with 16S ribosomal RNA gene‐specific PCR has the benefits of excellent sensitivity, resolution, and reproducibility. However, even though CE‐SSCP can separate PCR products with high‐resolution, multiplex detection and quantification are complicated by primer‐dimer formation and non‐specific amplification. Here, we describe a novel technique for multiplex detection and quantification of pathogens by template‐tagging followed by multiplex asymmetric PCR and subsequent CE‐SSCP. More specifically, we reverse transcribed 16S ribosomal RNAs from seven septicemia‐inducing pathogens, tagged the templates with common end sequences, and amplified them using common primers. The resulting amplicons could be successfully separated by CE‐SSCP and quantified by comparison to an internal standard. This method yielded results that illustrate the potential of this system for diagnosing infectious disease.     

Ultrasensitive electrochemiluminescent aptasensor for ochratoxin A detection with the loop-mediated isothermal amplification

In this study, we for the first time presented an efficient, accurate, rapid, simple and ultrasensitive detection system for small molecule ochratoxin A (OTA) by using the integration of loop-mediated isothermal amplification (LAMP) technique and subsequently direct readout of LAMP amplicons with a signal-on electrochemiluminescent (ECL) system. Firstly, the dsDNA composed by OTA aptamer and its capture DNA were immobilized on the electrode. After the target recognition, the OTA aptamer bond with target OTA and subsequently left off the electrode, which effectively decreased the immobilization amount of OTA aptamer on electrode. Then, the remaining OTA aptamers on the electrode served as inner primer to initiate the LAMP reaction. Interestingly, the LAMP amplification was detected by monitoring the intercalation of DNA-binding Ru(phen)₃²⁺ ECL indictors into newly formed amplicons with a set of integrated electrodes. The ECL indictor Ru(phen)₃²⁺ binding to amplicons caused the reduction of the ECL intensity due to the slow diffusion of Ru(phen)₃²⁺–amplicons complex to the electrode surface. Therefore, the presence of more OTA was expected to lead to the release of more OTA aptamer, which meant less OTA aptamer remained on electrode for producing LAMP amplicons, resulting in less Ru(phen)₃²⁺ interlaced into the formed amplicons within a fixed Ru(phen)₃²⁺ amount with an obviously increased ECL signal input. As a result, a detection limit as low as 10 fM for OTA was achieved. The aptasensor also has good reproducibility and stability.     

The development of miniSTRs as a method for high-speed direct PCR

There are situations in which it would be very valuable to have a DNA profile within a short time; for example, in mass disasters or airport security. In previous work, we have promoted reduced size STR amplicons for the analysis of degraded DNA. We also noticed that shorter amplicons are more robust during amplification, making them inhibition resistant, and potentially applicable to high-speed direct PCR. Here, we describe a set of miniSTRs capable of rapid direct PCR amplification. The selected markers are a subset of the Combined DNA Index System (CODIS) loci modified to permit high-speed amplification. Using the proposed protocol, the amplification of eight loci plus amelogenin directly from a saliva sample can be completed in 7 min and 38 s using a two-step PCR with 30 cycles of 98°C for 2 s and 62°C for 7 s on a Streck Philisa thermocycler. Selection of DNA polymerase, optimization of the two-step PCR cycling conditions, the primer concentrations, and the dilution of saliva is described. This method shows great potential as a quick screening method to obtain a presumptive DNA profile when time is limited, particularly when combined with high-speed separation and detection methods.     

Allele-specific amplification and electrochemiluminescence method for single nucleotide polymorphism analysis

A new approach combined the specificity of allele-specific amplification (ASA) with the sensitivity of electrochemilu- minescence (ECL) assay for single nucleotide polymorphism (SNP) analysis was proposed. Briefly, target gene was amplified by a biotin-labeled allele-specific forward primer and a Ru(bpy)32 (TBR)-labeled universal reverse primer. Then, the amplicon was captured onto streptavidin-coated paramagnetic beads through biotin label, and detected by measuring the ECL signal of TBR label. Different genotypes were distinguished according to the ECL values of the amplicons by different genotypic primers. K-ras oncogene was used as a target to validate the feasibility of the method. The experiment results show that the different genotypes can be clearly distinguished by ASA–ECL assay. The method is useful in SNP analysis due to its sensitivity, safety, and simplicity.     

Multiplex pyrosequencing of InDel markers for forensic DNA analysis

The capillary electrophoresis (CE) technology is commonly used for fragment length separation of markers in forensic DNA analysis. In this study, pyrosequencing technology was used as an alternative and rapid tool for the analysis of biallelic InDel (insertion/deletion) markers for individual identification. The DNA typing is based on a subset of the InDel markers that are included in the Investigator^® DIPplex Kit, which are sequenced in a multiplex pyrosequencing analysis. To facilitate the analysis of degraded DNA, the polymerase chain reaction (PCR) fragments were kept short in the primer design. Samples from individuals of Swedish origin were genotyped using the pyrosequencing strategy and analysis of the Investigator^® DIPplex markers with CE. A comparison between the pyrosequencing and CE data revealed concordant results demonstrating a robust and correct genotyping by pyrosequencing. Using optimal marker combination and a directed dispensation strategy, five markers could be multiplexed and analyzed simultaneously. In this proof‐of‐principle study, we demonstrate that multiplex InDel pyrosequencing analysis is possible. However, further studies on degraded samples, lower DNA quantities, and mixtures will be required to fully optimize InDel analysis by pyrosequencing for forensic applications. Overall, although CE analysis is implemented in most forensic laboratories, multiplex InDel pyrosequencing offers a cost‐effective alternative for some applications.     

New unsymmetrical cyanine dyes for real-time thermal cycling

Asymmetric cyanine dyes bind to the minor groove of double stranded DNA (dsDNA) owing to their crescent configuration; therefore, these dyes are widely used as a dsDNA probes. BOXTO-MEE is derived from BOXTO by adding the polar methoxyethoxyethyl tail in order to increase solubility, dissociation rate kinetics, and stability. As a result, BOXTO-MEE showed significant reduction in nonspecific amplification (primer dimers) without significant effect on target sequence amplification, PCR efficiency, and standard curve correlation coefficient. BETIBO is another example of an asymmetric cyanine dye that can binds to dsDNA but is less efficient than BOXTO-MEE for use in real-time PCR. Statistical analysis of reproducibility results shows that BETIBO is not strong enough to be used for quantifying low nucleic acid quantities. Statistical analysis for BOXTO-MEE results shows that there is no significant difference between the efficiency and correlation coefficient achieved by BOXTO-MEE and SYBR Green I, but a significant difference in the dynamic range is observed because BOXTO-MEE has a wider dynamic range. BOXTO-MEE stock solution was stable at −20 °C for more than 1 year and 40 μM solution was stable for 45 days (at least) at 4 °C.     

Detection of Escherichia coli O157:H7 DNA using two fluorescence polarization methods

Using stx 2 gene in verotoxin-producing Escherichia coli O157:H7 as a target DNA, polymerase chain reaction (PCR) amplification has been combined with fluorescence polarization (FP) by two distinct combination protocols. The first approach (PCR-probe-FP) requires that fluorescence labeled specific probes are hybridized with the asymmetric PCR product. In the second protocol (PCR-primer-FP), the fluorescence labeled primer is used in PCR amplification. In both methods, the PCR products are detected using fluorescence polarization. Hybridization (in the PCR-probe-FP method) and conversion (in the PCR-primer-FP method) of 5′-fluorescence labeled oligodeoxynucleotide to the PCR product are monitored by an increase in the anisotropy ratio. The results demonstrate the importance of asymmetric PCR (in the first method) and the selection of dye-modified primer concentration (in the second method) for designing a polarization strategy for the detection of DNA sequence. It has been found that the methods can be used for the identification of infectious agents. This system has also been applied to the determination of Escherichia coli O157:H7 strains.     

Optimized suppression of adducts in polymerase chain reaction products for semi-quantitative SNP genotyping by liquid chromatography-mass spectrometry

While electrospray ionization mass spectrometry has shown great potential for the identification of genotypes in DNA sequences amplified by polymerase chain reaction (PCR), the quantitative determination of allele frequencies remains challenging because of the presence of cationic adducts in the mass spectra which severely impairs accuracy of quantitation. We report here on the elaboration of an optimized desalting protocol for ion-pair reversed-phase high-performance liquid chromatography-electrospray ionization mass spectrometry (ICEMS) of PCR amplicons which facilitates the genotyping of single nucleotide polymorphisms (SNPs). Chromatographic purification at temperatures between 50 and 70 degrees C using monolithic reversed-phase columns and acetonitrile gradients in aqueous, 20-30 mmol/l butyldimethylammonium bicarbonate enabled the mass spectrometric analysis of nucleic acid solutions containing up to 1.7 mol/l sodium chloride. A further improvement in removal of metal cations was achieved upon the addition of 5-10 mmol/l ethylenediaminetetraacetic acid (EDTA) to the sample solution prior to liquid chromatography. ICEMS was used for the semi-quantitative genotyping of SNPs amplified from the tetraploid genome of potato cultivars. Using a quadrupole ion trap mass spectrometer, allele frequencies were determined with an accuracy of 2-9% by measuring the relative intensities of the signals corresponding to the molecular mass of each of the alleles in the deconvoluted mass spectra. ICEMS results correlated well with those obtained by pyrosequencing, single nucleotide primer extension, and conventional dideoxy sequencing.     

Biosensing by Tandem Reactions of Structure Switching,Nucleolytic Digestion,and DNA Amplification of a DNA Assembly

?29 DNA polymerase (?29DP) is able to carry out repetitive rounds of DNA synthesis using a circular DNA template by rolling circle amplification (RCA). It also has the ability to execute 3′–5′ digestion of single‐stranded but not double‐stranded DNA. A biosensor engineering strategy is presented that takes advantage of these two properties of ?29DP coupled with structure‐switching DNA aptamers. The design employs a DNA assembly made of a circular DNA template, a DNA aptamer, and a pre‐primer. The DNA assembly is unable to undergo RCA in the absence of cognate target owing to the formation of duplex structures. The presence of the target, however, triggers a structure‐switching event that causes nucleolytic conversion of the pre‐primer by ?29DP into a mature primer to facilitate RCA. This method relays target detection by the aptamer to the production of massive DNA amplicons, giving rise to dramatically enhanced detection sensitivity.     

Biosensor for the specific detection of a single viable B. anthracis spore

A simple membrane strip-based biosensor for the detection of viable B. anthracis spores was developed and combined with a spore germination procedure as well as a nucleic acid amplification reaction to identify as little as one viable B. anthracis spore in less than 12 h. The biosensor is based on identification of a unique mRNA sequence from the anthrax toxin activator (atxA) gene encoded on the toxin plasmid, pXO1. Preliminary work relied on plasmid vectors in both E. coli and B. thuringiensis expressing the atxA gene. Once the principle was firmly established, the vaccine strain of B. anthracis was used. After inducing germination and outgrowth of spores of B. anthracis (Sterne strain), RNA was extracted from lysed cells, amplified using nucleic acid sequence-based amplification (NASBA), and rapidly identified by the biosensor. While the biosensor assay requires only 15-min assay time, the overall process takes 12 h for the detection of as little as one viable B. anthracis spore, and is shortened significantly, if larger amounts of spores are present. The biosensor is based on an oligonucleotide sandwich-hybridization assay format. It uses a membrane flow-through system with an immobilized oligonucleotide probe that hybridizes with the target sequence. Signal amplification is provided when the target sequence hybridizes to a second oligonucleotide probe that has been coupled to dye-encapsulating liposomes. The dye in the liposomes then provides a signal that can be read visually or quantified with a hand-held reflectometer. The biosensor can detect as little as 1.5 fmol of target mRNA. Specificity analysis revealed no crossreactivity with closely related species such as B. cereus, B. megaterium, B. subtilis, B. thuringiensis etc.