Immobilization of trypsin on graphene oxide for microwave-assisted on-plate proteolysis combined with MALDI-MS analysis

With an ultra-high surface area and abundant functional groups, graphene oxide (GO) provides an ideal substrate for the immobilization of trypsin. We demonstrated that trypsin could be immobilized on GO sheets assisted by polymers as molecular spacers to maintain the activity of the enzyme. And with the trypsin-linked GO as the enzyme immobilization probe, a novel microwave-assisted on-plate digestion method has been developed with subsequent analysis by MALDI-MS. The feasibility and performance of the digestion approach were demonstrated by the proteolysis of standard proteins. The results show that this novel approach substantially accelerated proteolysis and reduced the time required for traditional procedures involving on-plate enzymatic digestion and sample preparation prior to MALDI-MS analysis. The novel digestion approach is simple and efficient, offering great promise for high throughput protein identification.     

Immobilization of trypsin on miniature incandescent bulbs for infrared-assisted proteolysis

A novel efficient proteolysis approach was developed based on trypsin-immobilized miniature incandescent bulbs and infrared (IR) radiation. Trypsin was covalently immobilized in the chitosan coating on the outer surface of miniature incandescent bulbs with the aid of glutaraldehyde. When an illuminated enzyme-immobilized bulb was immersed in protein solution, the emitted IR radiation could trigger and accelerate heterogeneous protein digestion. The feasibility and performance of the novel proteolysis approach were demonstrated by the digestion of hemoglobin (HEM), cytochrome c (Cyt-c), lysozyme (LYS), and ovalbumin (OVA) and the digestion time was significantly reduced to 5 min. The obtained digests were identified by MALDI-TOF-MS with the sequence coverages of 91%, 77%, 80%, and 52% for HEM, Cyt-c, LYS, and OVA (200 ng μL⁻¹ each), respectively. The suitability of the prepared bulb bioreactors to complex proteins was demonstrated by digesting human serum.     

Immobilization of trypsin on silica-coated fiberglass core in microchip for highly efficient proteolysis

In this report, trypsin was immobilized on silica-coated fiberglass core in microchip to form a core-changeable bioreactor for highly efficient proteolysis. To prepare the fiber core, a layer of organic-inorganic hybrid silica coating was prepared on the surface of a piece of glass fiber by a sol-gel method with tetraethoxysilane (TEOS) and 3-aminopropyltriethoxysilane (APTES) as precursors. Subsequently, trypsin was immobilized on the coating with the aid of glutaraldehyde. Prior to use, the enzyme-immobilized fiber was inserted into the channel of a microchip to form an in-channel fiber bioreactor. The novel bioreactor can be regenerated by changing its fiber core. The scanning electron microscopy images of the cross-section of a trypsin-immobilized fiber indicated that a layer of ∼1 μm thick film formed on the glass substrate. The feasibility and performance of the unique bioreactor were demonstrated by the tryptic digestion of bovine serum albumin (BSA) and cytochrome c (Cyt-c) and the digestion time was significantly reduced to less than 10 s. The digests were identified by MALDI-TOF MS with sequence coverages of 45% (BSA) and 77% (Cyt-c) that were comparable to those obtained by 12-h conventional in-solution tryptic digestion. The fiber-based microchip bioreactor provides a promising platform for the high-throughput protein identification.     

Efficient sample proteolysis based on a microchip containing a glass fiber core with immobilized trypsin

Trypsin was immobilized on cellulose-coated glass fibers via a condensation reaction between the aldehyde groups of the oxidized cellulose and the primary amino groups of trypsin. A piece of the modified fiber was inserted into the main channel of a poly(methyl methacrylate) microchip to form a microfluidic proteolytic bioreactor. Scanning electron microscopy of the cross section of the fiber revealed a rough film on the surface of the fiber glass. The performance of the bioreactor was demonstrated by the tryptic digestion of hemoglobin and cytochrome c, where the time for digestion was reduced to <10?s. The digests were identified by MALDI-TOF-MS to obtain peptide mass fingerprint spectra. The results indicated that the digestion in the microfluidic bioreactor is comparable to that of a 12-h solution tryptic digest and thus provides a promising platform for the high throughput identification of proteins.

Charge storage characteristics of layer-by-layer assembled nickel hydroxide and graphene oxide nanosheets

Journal of Solid State Electrochemistry - In this study, layer-by-layer assembled thin films composed of nickel hydroxide and graphene oxide nanosheets were produced via simple dip coating process....     

Preparation of graphene oxide–chitosan composite and adsorption performance for uranium

The composite adsorbent graphene oxide–chitosan was prepared using graphite and chitosan as the initial materials. The structures and morphology of the products were characterized by Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy. The products were used to remove uranium from aqueous solution by batch adsorption experiments. The effects of pH, adsorbent dosage, contact time, initial uranium concentration and temperature on the uranium removal were investigated, and the results were fitted by the adsorption isotherm models. The adsorption kinetic and thermodynamic were also studied in detail.     

Adsorption of graphene oxide/chitosan porous materials for metal ions

Porous graphene oxide/chitosan（PGOC） materials were prepared by a unidirectional freeze-drying method.Their porous structure,mechanical property and adsorption for metal ions were investigated.The results show that the incorporation of graphene oxide（GO） significantly increased the compressive strength of the PGOC materials.The saturated adsorption capacity of Pb²⁺ increased about 31%,up to 99 mg/g when 5 wt%GO was incorporated These biodegradable,nontoxic,efficient PGOC materials will be a potential adsorbent for metal ions in aqueous solution.     

Viscoelastic response and interlaminar delamination resistance of epoxy/glass fiber/functionalized graphene oxide multi-scale composites

Graphene oxide (GO) was functionalized using three different diamines, namely ethylenediamine (EDA), 4,4′-diaminodiphenyl sulfone (DDS) and p-phenylenediamine (PPD) to reinforce an epoxy/glass fiber (EP/GF) composite laminate, with the aim of improving the overall composite mechanical performance. Different mechanical characterization techniques were used to determine the mechanical performance, including: tensile stress strain, double cantilever beam (DCB) mode-I fracture toughness and dynamic mechanical thermal analysis (DMTA). Scanning electron microscopy (SEM) was used to support the results and conclusions. The results demonstrated remarkable enhancements in the mechanical performance of EP/GF composite laminates by incorporation of functionalized graphene oxide (FGO) nanofiller, whilst the mechanical performance of the GO reinforced composite only improved marginally. Finally, the mechanical performance of the EP/GF/FGO multi-scale composites was found to be dependent on the type of FGO functional groups; of which EDA exhibited the highest performance. These investigations confirmed that the EDA-FGO-reinforced EP/GF composites possess excellent potential to be used as multifunctional engineering materials in industrial applications.     

Application of a new fiber coating based on electrochemically reduced graphene oxide for the cold‐fiber headspace solid‐phase microextraction of tricyclic antidepressants

A new fiber based on the electrochemical reduction of graphene oxide was prepared on a copper wire for solid‐phase microextraction (SPME) applications. The prepared fiber was used for the SPME and gas chromatographic analysis of tricyclic antidepressants (TCADs), including amitriptyline, trimipramine, and clomipramine. The feasibility of direct‐immersion and headspace modes of SPME for the determination of TCADs was studied. The effects of four parameters including pH, salt content, extraction temperature with and without cooling the fiber, and extraction time were investigated. The comparison showed that headspace cold fiber SPME results in the best outcome for the extraction of TCADs. Under the optimized conditions of this mode, the calibration curves were linear between 2.0 and 500 ng/mL and the detection limits were between 0.30 and 0.53 ng/mL. The intraday and interday RSDs obtained at 20 ng/mL (n = 5), using a single fiber, were 5.5–9.0 and 7.5–9.8, respectively. The fiber to fiber repeatability (n = 4), expressed as the RSD, was between 12.8 and 13.2% at a 20 ng/mL concentration level. The method was successfully applied to the analysis of TCADs in plasma samples showing recoveries from 73 to 96%.     

Immobilization of In2O3 nanoparticles on the surface of reduced graphene oxide

This communication describes a new method for immobilizing indium oxide nanoparticles (∼20 nm) on the surface of reduced graphene oxide. Dispersion of graphene oxide with added In₂O₃ nanoparticles was treated in supercritical isopropanol, both a reducing agent of graphene oxide and a reaction medium. The resulting nanocomposite was characterized by different methods of physical and chemical analysis.     

Fabrication of a nanohybrid of conjugated polymer nanoparticles and graphene oxide for biosensing of trypsin

Conjugated polymers containing triphenylamine group are synthesized via Suzuki coupling polymerization. Fluorescent‐conjugated polymer nanoparticles (CPN) are prepared by reprecipitation method using the newly synthesized conjugated polymer. CPN can be encapsulated with polyarginine by electrostatic interaction. The CPN modified with polyarginine exhibit excellent interaction with graphene oxide (GO) which is chemically modified with hydrophilic groups that possesses negative charge, which, in turn, induces the quenching of the fluorescence of CPN upon formation of CPN–GO nanohybrid. Upon exposure to trypsin, the quenched fluorescence is recovered by release of CPN from the nanohybrid, because trypsin cleaves the polyarginine linkage, resulting in weakening of interaction between CPN and GO. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1898–1904     

Immobilization and detection of DNA on microfluidic chips

With the rapid development of micro-Total Analysis Systems (muTAS) and sensitive DNA recognition technologies, it is possible to immobilize DNA probes to small areas of surfaces other than silicon. To this end, photolithographic techniques were used to derivatize micron-sized, spatially segregated DNA recognition elements in Polydimethylsiloxane (PDMS) microfluidic structures. UV light was used to initiate attachment of a photoactive biotin molecule to the substrate surface. Once biotin was attached to a substrate, biotin/avidin/biotin chemistry was used to attach fluorescently labeled or non-labeled avidin and biotinylated DNA probes. These techniques were applied to create a prototype microfluidic sensor device that was used to separate and identify synthetic DNA targets that were fluorescently-labeled.     

Interfacial structure and tribological behaviours of epoxy resin coating reinforced with graphene and graphene oxide

Graphene (G) and graphene oxide (GO) were added into epoxy resin (EP) respectively via chemical modification and physical ultrasound technology to improve the tribological behaviour of EP coating. The topographies of G and GO were detected by scanning probe microscopy. The chemical structures of the fillers before and after modification were identified by Fourier transform infrared spectrometer. The across‐section topographies of the coatings were detected by scanning electron microscopy. The tribological behaviour of the coatings was evaluated by UMT‐3 tribology tester, surface profiler and scanning electron microscopy. The results revealed that the coefficient of friction of the coatings decreased, and the wear resistance of the coatings improved with the addition of the G and GO. GO could improve the tribological performance of EP further compared to G. When containing 0.5 wt% G and 0.75 wt% GO, the coatings had the lowest coefficient of friction and best wear resistance. When the contents of G reached 0.75 wt%, and GO reached 1 wt%, the tribological performance of the composite coatings decreased as a result of the agglomeration of the fillers. Finally, the anti‐friction and anti‐wear mechanisms of G‐EP and GO‐EP composite coatings were discussed in detail based on the results obtained in the preceding texts. Copyright © 2016 John Wiley & Sons, Ltd.     

Immobilization of enzyme on detonation nanodiamond for highly efficient proteolysis

Immobilization of enzyme on detonation nanodiamond (dND, 3-10 nm) and its application for efficient proteolysis have been demonstrated. By evaluation of the Michaelis constant (K_m) and maximum velocity (V_max) of immobilized enzyme, its activity was not impaired significantly by immobilization. And enzyme immobilized on dNDs exhibited much better thermal and chemical stabilities than its free counterpart and maintained high activity even after 10 times reuse. The efficient proteolysis by trypsin immobilized on dNDs (dND-trypsin) is demonstrated with the digestion of myoglobin (or other model protein) in a short time (5 min). Large numbers of identified peptides obtained by dNDs-trypsin enable a higher degree of sequence coverage and more positive identification of proteins than those obtained by in-solution digestion and the commercial immobilized trypsin beads, respectively. Moreover, immobilization of peptide-N-glycosidase F (PNGase F) on dNDs was realized and resulted in faster sequential glycosidase digestion of glycopeptides in less than 10 min.     

Immobilization of tris(1,10-phenanthroline)ruthenium with graphene oxide for electrochemiluminescent analysis

Electrochemiluminescence (ECL) of ruthenium complexes has broad applications and the immobilization of Ru(bpy)₃²⁺ has received extensive attention. In comparison with Ru(bpy)₃²⁺, Ru(phen)₃²⁺ can be immobilized more easily because of its better adsorbability. In this study, immobilization of Ru(phen)₃²⁺ for ECL analysis has been demonstrated for the first time by using graphene oxide (GO) as an immobilization matrix. The immobilization of Ru(phen)₃²⁺ is achieved easily by mixing Ru(phen)₃²⁺ with GO without using any ion exchange polymer or covalent method. The strong binding of Ru(phen)₃²⁺ with GO is attributed to both the π–π stacking interaction and the electrostatic interaction. The Ru(phen)₃²⁺/GO modified electrode was characterized by using tripropylamine (TPA) as the coreactant. The linear range of TPA is from 3 × 10⁻⁷ to 3 × 10⁻² mol L⁻¹ with the detection limit of 3 × 10⁻⁷ mol L⁻¹. The ECL sensor demonstrates outstanding long-term stability. After the storage in the ambient environment for 90 days, the ECL response remains comparable with its original signal.     

Electrografting of amino-TEMPO on graphene oxide and electrochemically reduced graphene oxide for electrocatalytic applications

4-Amino-2,2,6,6-tetramethyl-1-piperridine N-oxyl (4-amino-TEMPO), an electroactive nitroxide radical, was attached to the surface of graphene oxide (GO) and electrochemically reduced graphene oxide (ERGO) modified glassy carbon electrode by a simple, rapid and green electrografting method. The electroactive interfaces were analyzed by X-ray photoelectron spectroscopy (XPS) and cyclic voltammetry (CV). The calculated surface coverage for 4-amino-TEMPO is up to 1.55 × 10^− 9 mol·cm^− 2. The modified electroactive interface exhibited excellent electrocatalytic activity towards the electro-oxidation of reduced glutathione (GSH) and hydrogen peroxide (H₂O₂).     

Cyclodextrin‐functionalized reduced graphene oxide as a fiber coating material for the solid‐phase microextraction of some volatile aromatic compounds

A novel solid phase microextraction fiber was prepared for the first time by using a sol–gel technique with hydroxypropyl‐β‐cyclodextrin‐functionalized reduced graphene oxide as the fiber coating material. The results verified that the β‐cyclodextrin was successfully grafted onto the surface of reduced graphene oxide and the coating possessed a uniform folded and wrinkled structure. The performance of the solid phase microextraction fiber was evaluated by using it to extract nine volatile aromatic compounds from water samples before determination with gas chromatography and flame ionization detection. Some important experimental parameters that could affect the extraction efficiency such as the extraction time, extraction temperature, desorption temperature, desorption time, the volume of water sample solution, stirring rate, as well as ionic strength were optimized. The new method was validated to be effective for the trace analysis of some volatile aromatic compounds, with the limits of detection ranging from 2.0 to 8.0 ng/L. Single fiber repeatability and fiber‐to‐fiber reproducibility were in the range of 2.5–9.4 and 5.4–12.9%, respectively. The developed method was successfully applied to the analysis of three different water samples, and the recoveries of the method were in the range from 77.9 to 113.6% at spiking levels of 10, 100, and 1000 ng/L, respectively.     

氧化石墨烯和石墨烯在催化领域中的应用研究进展

石墨烯具有独特的二维平面结构,其导电性能好,比表面积大,耐酸碱,耐高温.基于石墨烯的优异特性,本文作者从材料的合成和结构等方面对石墨烯基催化剂的研制及其催化性能进行了评述.介绍了石墨烯催化体系的类型和机理,对石墨烯催化中存在的问题进行了简单分析,并对石墨烯在催化领域的应用前景进行了展望.     

Coprecipitation of calcium hydroxyapatite,graphene oxide,and chitosan from aqueous solutions

We determined the character of interactions between calcium hydroxyapatite Са₁₀(РO₄)₆(ОН)₂ (HA), graphene oxide (GO), and chitosan (С₆Н₁₁NO₄) _n (CHT) to yield HA/CHT/GO nanocomposites (NCs) in the СаС1₂–(NH₄)₂НРО₄–NH₃–Н₂О–(С₆Н₁₁NO₄) _n –GO system (25°С). A set of physicochemical methods helped us to elucidate composition–synthesis parameters–structure–particle size–properties correlations for the prepared NCs and to prove the feasibility to manufacture NCs with tailored HA, CHT, and GO contents, described by the bulk formula Са₁₀(РО₄)₆(ОН)₂ · х(С₆Н₁₁NO₄) _n · yGO · zН₂О, where х = 0.1, 0.2, 0.3; y = 0.6, 1.2, 2.4; and z = 6.0–7.4.     

Immobilization of a Ce(IV)-substituted polyoxometalate on ethylenediamine-functionalized graphene oxide for selective extraction of phosphoproteins

A sorbent for selective extraction of phosphoproteins was obtained by immobilization of a Ce(IV)-substituted polyoxometalate on ethylenediamine-functionalized graphene oxide (CeEGO). The resulting composites exhibit an adsorption capacity of 981 mg g^?1 for β-casein due to the synergistic effect of metal-affinity interaction between Ce(IV) and phosphate groups and π-stacking interaction between the polyoxometalate framework and the phosphate groups. The results of LC-MS and SDS-PAGE analysis show that the CeEGO composites can be applied to the extraction of phosphoproteins from protein mixture, and as little as 50 μg mL^?1 of the phosphoprotein β-casein can be detected by SDS-PAGE. It was also applied to the extraction of β-casein from spiked biological samples such as drinking milk, whole blood and swine heart tissue extract.

Open image in new window

Graphical abstract An efficient sorbent is obtained by immobilization of a Ce(IV)-substituted polyoxometalate on ethylenediamine-functionalized graphene oxide (CeEGO). The resulting composites exhibit highly selective capture capacity towards phosphoproteins due to the synergistic effect of metal-affinity interaction between Ce(IV) and phosphate groups and π-stacking interaction between the polyoxometalate framework and the phosphate groups.