Gold‐Aryl nanoparticles coated with polyelectrolytes for adsorption and protection of DNA against nuclease degradation

Binding DNA on nanoparticles was pursued to form nanoplatform for formation of non‐viral gene system. Carboxyl derivatized gold‐aryl nanoparticles can bind with biodegradable cationic polyelectrolytes such as polydiallyldimethylammonium chloride (PDADMAC). In our study, we used gold‐aryl nanoparticles (AuNPs) treated with PDADMAC to form conjugates with non‐thiol or non‐disulfide modified oligonucleotide DNA. Both AuNPs‐DNA and PDADMAC‐AuNPs‐DNA biomaterials were characterized using UV–Vis, dynamic light scattering (DLS), atomic force microscopy (AFM), transmission electron microscopy (TEM) and agarose gel electrophoresis. UV–Vis showed a red shift in the plasmon peak as compared with unconjugated AuNPs. DLS measurements also showed difference in the size of AuNPs‐DNA and PDADMAC‐AuNPs‐DNA. AFM and TEM results showed proper conjugation of DNA with AuNPs. Gel electrophoresis proved the presence of interaction between PDADMAC‐AuNPs and negatively charged DNA. The binding of DNA in the described bioconjugate enhanced its protection against nuclease degradation and prolonged its presence in the digestive environment of DNase‐I. From the results we expect that these biomaterials can be used in nanomedicine with emphasis on non‐viral gene system.     

Structural characterization of a spin-assisted colloid-polyelectrolyte assembly: stratified multilayer thin films

The assembly of polyelectrolytes and gold nanoparticles yields stratified multilayers with very low roughness and high structural perfection. The films are prepared by spin-assisted layer-by-layer self-assembly (LbL) and are characterized by X-ray reflectivity (XRR), UV-vis spectroscopy, atomic force microscopy (AFM), and transmission electron microscopy (TEM). Typical structures have four repeat units, each of which consists of eight double layers (DL) of poly(sodium 4-styrenesulfonate)/poly(allylamine hydrochloride), one monolayer of gold nanoparticles (10 nm diameter), and another layer of poly(allylamine hydrochloride). XRR scans show small-angle Bragg peaks up to seventh order, evidencing the highly stratified structure. Pronounced Kiessig fringes indicate a low global roughness, which is confirmed by local AFM measurements. TEM images corroborate the layered structure in the growth direction and nicely show the distinct separation of the individual particle layers. An AFM study reveals the lateral gold particle distribution within one individual particle layer. Interestingly, the spin-assisted deposition of polyelectrolytes reduces the roughness induced by the particle layers, leading to self-healing of roughness defects and a rather perfect stratification.     

Submicrometer intermediates in the citrate synthesis of gold nanoparticles: new insights into the nucleation and crystal growth mechanisms

The reduction of tetrachloroaurate by citrate ions in aqueous solutions yielding gold nanoparticles (GNPs) has been studied using in situ tapping mode atomic force microscopy (AFM), UV-vis absorption and dynamic light scattering (DLS) spectroscopies, small-angle X-ray scattering (SAXS) along with ex situ TEM, EDX and XPS. Special attention is given to mesoscale intermediates responsible for the intense coloring of the transient solutions and their role in nucleation and crystal growth. AFM detects liquid droplet-like domains, globules 30-50 nm in diameter arranged in submicrometer aggregates in the gray and blue solutions, and well separated individual particles in the final red sols. DLS shows abrupt appearance of species about 30 nm and larger but not growing Au nanoparticles, while SAXS reveals gradually increasing nanoparticles and no aggregates. The mesoscale structures observed in TEM become looser as the reaction proceeds; they contain signatures of oxidized Au and other solutes. The results are interpreted in terms of decomposition of supersaturated solutions to afford domains ("dense droplets") enriched by gold, and then, after nucleation and coalescence of Au nuclei inside them, rather slow growth of gold nanoparticles within the associated globules; the color changes of the transient solutions are due to increasing interparticle distances.     

Green synthesis of silver nanoparticles from aqueous extract of Ziziphora clinopodioides Lam and evaluation of their bio-activities under in vitro and in vivo conditions

The purpose of this experiment was the green synthesis of silver nanoparticles from aqueous extracts of Ziziphora clinopodioides Lam (AgNPs@Ziziphora) and assessment of their cytotoxicity, antioxidant, antibacterial, antifungal, and cutaneous wound-healing effects. These nanoparticles were characterized using ultraviolet–visible spectroscopy (UV–Vis), X-ray diffraction (XRD), field emission scanning electron microscopy with energy-dispersive X-ray spectroscopy (FESEM-EDX), atomic force microscopy (AFM), and transmission electron microscopy (TEM). UV–Vis, TEM, and FESEM analyses indicated that the size of Ag nanoparticles (AgNPs) depended on Z. clinopodioides and AgNO₃ concentrations. In vitro biological experiments indicated that AgNPs@Ziziphora has excellent antioxidant potential against DPPH, antifungal effects against Candida guilliermondii, Candida krusei, Candida glabrata, and Candida albicans, and antibacterial activities against Staphylococcus aureus, Bacillus subtilis, Streptococcus pneumonia, Salmonella typhimurium, Pseudomonas aeruginosa, and Escherichia coli O157:H7. Also, these nanoparticles did not exhibit cytotoxicity property against human umbilical vein endothelial cells (HUVECs). An in vivo biological test revealed that AgNPs@Ziziphora ointment significantly (p ≤ 0.01) increased the levels of wound contracture, blood vessels, hydroxyl proline, hexuronic acid, hexosamine, fibrocytes, fibroblasts, and fibrocyte/fibroblast ratio and significantly (p ≤ 0.01) decreased the wound area, and levels of total cells, neutrophils, and lymphocytes than other groups in rats. The results of UV–Vis, XRD, FESEM-EDX, AFM, and TEM confirmed that the aqueous extract of Z. clinopodioides can be used to produce silver nanoparticles with significant antioxidant, antimicrobial, and cutaneous wound-healing properties without any cytotoxicity.     

Challenge in understanding size and shape dependent toxicity of gold nanomaterials in human skin keratinocytes

As the nanotechnology field continues to develop, assessing nanoparticle toxicity is very important for advancing nanoparticles for biomedical application. Here we report cytotoxicity of gold nanomaterial of different size and shape using MTT test, absorption spectroscopy and TEM. Spherical gold nanoparticles of different sizes are not inherently toxic to human skin cells, but gold nanorods are highly toxic due to the presence of CTAB as coating material. Due to toxicity of CTAB, and aggregation of gold nanomaterials in the presence of cell media, we have demonstrated that it is difficult to understand the cytotoxicity of gold nanomaterials individually.     

Ultrafine biocompatible chitosan nanoparticles encapsulating multi-coloured quantum dots for bioapplications

Owing to their excellent optical properties, luminescent semi-conductor quantum dots (QDs) have proven themselves to be an attractive choice in biological labeling. However, there exists the concern of cytotoxicity in using these heavy metal-based nanoparticles as molecular probes. In order to improve their general biocompatibility, CdSe/ZnS QDS are encapsulated in the natural biopolymer chitosan, forming monodisperse chitosan nanoparticles in the range of 60 nm in 1 single step. This straight forward method also allows for the synthesis of chitosan nanoparticles encapsulating multi-coloured QDs. In vitro 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) cytotoxicity tests on primary myoblast cells suggest that the cytotoxicity of the QDs is greatly reduced after chitosan encapsulation. At the same time, fluorescence confocal microscopy studies also prove that nanoparticles are small enough to be internalized into the myoblast cells. Our results show the ease of synthesizing biocompatible, nanometer-sized chitosan nanoparticles encapsulating QDs and their promise in biological applications such as ultra-sensitive bio-detection and labeling of biomolecules.     

Characterization and biocompatibility of chitosan nanocomposites

Chitosan nanocomposites were prepared from chitosan and gold nanoparticles (AuNPs) or silver nanoparticles (AgNPs) of ～5 nm size. Transmission electron microscopy (TEM) showed the NPs in chitosan did not aggregate until higher concentrations (120-240 ppm). Atomic force microscopy (AFM) demonstrated that the nanocrystalline domains on chitosan surface were more evident upon addition of AuNPs (60 ppm) or AgNPs (120 ppm). Both nanocomposites showed greater elastic modulus, higher glass transition temperature (T(g)) and better cell proliferation than the pristine chitosan. Additionally, chitosan-Ag nanocomposites had antibacterial ability against Staphylococcus aureus. The potential of chitosan-Au nanocomposites as hemostatic wound dressings was evaluated in animal (rat) studies. Chitosan-Au was found to promote the repair of skin wound and hemostasis of severed hepatic portal vein. This study indicated that a small amount of NPs could induce significant changes in the physicochemical properties of chitosan, which may increase its biocompatibility and potential in wound management.     

Gold-copolymer nanoparticles: Poly(ε-caprolactone)/poly(N-vinyl-2-pyrrolydone) Biodegradable triblock copolymer as stabilizer and reductant

Block copolymers have been extensively used in the synthesis of many types of nanoparticles, where generally are considered as stabilizer and protective agent. In this work a double function of the biodegradable triblock copolymer poly(N-vinyl-2-pyrrolidone)-b-poly(ε-caprolactone)-b-poly(N-vinyl-2-pyrrolidone), (PVP-PCL-PVP) in the gold nanoparticle-copolymer synthesis is reported.Gold-copolymer composed nanoparticles were synthesized using the triblock copolymer (PVP-PCL-PVP) and potassium tetrachloro aurate (III), both in aqueous solution. The copolymer work as both, reductant and stabilizer agent. The obtained nanoparticles were characterized by FT-IR, dynamic light scattering (DLS), atomic force microscopy (AFM) and transmission electron microscopy (TEM). The shape and the size of the obtained nanoparticles are dependent on the copolymer/salt of gold concentration ratio used in the synthesis.To complement the experimental results about the copolymer role in the nanoparticles synthesis, computational tools were used to characterize the reactivity of the reactant species.     

Efficiency enhancement of methanol/ethanol oxidation reactions on Pt nanoparticles prepared using a new surfactant, 1,1-dimethyl heptanethiol

In this study, carbon-supported platinum nanoparticle catalysts were prepared using PtCl(4) and H(2)PtCl(6) as starting materials and 1-heptanethiol, 1,1-dimethyl heptanethiol, 1-hexadecanethiol and 1-octadecanethiol as surfactants. These nanoparticles can be used as catalysts for methanol and ethanol oxidation reactions in methanol and ethanol fuel cells. 1,1-Dimethyl heptanethiol was used for the first time in this type of synthesis; other surfactants were used to synthesize nanoparticles for comparison of the catalyst's performance. Cyclic voltammetry, X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), atomic force microscopy (AFM) and transmission electron microscopy (TEM) were used to characterize the catalysts. It should also be stressed that AFM was employed for the first time in determining the surface topography of these catalysts. XRD, TEM and AFM height results indicate that the platinum crystallizes into a face-centered cubic structure and the surfactant plays an important role in determining the size of the platinum nanoparticles. XPS data revealed that the platinum was found in two different oxidation states, Pt(0) and Pt(IV) with a ratio of about 7.5:2.5, respectively. Electrochemical studies showed catalyst IIa to be the most active sample towards methanol/ethanol oxidation reactions (～342 A g(-1) Pt at 0.612 V for methanol (4.6 times more active than the commercial catalyst), ～309 A g(-1) Pt at 0.66 V for ethanol, (15.4 times more active than the commercial catalyst)).     

Determination of the size, concentration, and refractive index of silica nanoparticles from turbidity spectra

The size and concentration of silica cores determine the size and concentration of silica/gold nanoshells in final preparations. Until now, the concentration of silica/gold nanoshells with Stober's silica core has been evaluated through the material balance assumption. Here, we describe a method for simultaneous determination of the average size and concentration of silica nanospheres from turbidity spectra measured within the 400-600 nm spectral band. As the refractive index of silica nanoparticles is the key input parameter for optical determination of their concentration, we propose an optical method and provide experimental data on a direct determination of the refractive index of silica particles n = 1.475 +/- 0.005. Finally, we exemplify our method by determining the particle size and concentration for 10 samples and compare the results with transmission electron microscopy (TEM), atomic force microscopy (AFM), and dynamic light scattering data.     

Binding of chloroquine-conjugated gold nanoparticles with bovine serum albumin

We have conjugated chloroquine, an anti-malarial, antiviral and anti-tumor drug, with thiol-functionalized gold nanoparticles and studied their binding interaction with bovine serum albumin (BSA) protein. Gold nanoparticles have been synthesized using sodium borohydride as reducing agent and 11-mercaptoundecanoic acid as thiol functionalizing ligand in aqueous medium. The formation of gold nanoparticles was confirmed from the characteristic surface plasmon absorption band at 522 nm and transmission electron microscopy revealed the average particle size to be ~7 nm. Chloroquine was conjugated to thiolated gold nanoparticles by using EDC/NHS chemistry and the binding was analyzed using optical density measurement and Fourier transform infrared spectroscopy. The chloroquine-conjugated gold nanoparticles (GNP-Chl) were found to interact efficiently with BSA. Thermodynamic parameters suggest that the binding is driven by both enthalpy and entropy, accompanied with only a minor alteration in protein's structure. Competitive drug binding assay revealed that the GNP-Chl bind at warfarin binding site I in subdomain IIA of BSA and was further supported by Trp212 fluorescence quenching measurements. Unraveling the nature of interactions of GNP-Chl with BSA would pave the way for the design of nanotherapeutic agents with improved functionality, enriching the field of nanomedicine.     

Comparison study of the solution phase versus solid phase place exchange reactions in the controlled functionalization of gold nanoparticles

Gold nanoparticles offer tremendous potential in the areas of nanoelectronics, bio- and chemosensors, and catalysis. However, before these applications are realized, the surface functionality of nanoparticles must be better controlled. Our lab has recently reported a novel synthetic approach for making monofunctionalized nanoparticles through a solid phase place exchange reaction. Monofunctionalized gold nanoparticles may also be prepared through a solution phase place exchange reaction. In this study, we compared the efficiency of these two separate approaches toward controlled functionalization of gold nanoparticles by (1)H NMR, Fourier transform infrared (FT-IR), and transmission electron microscopy (TEM) analysis. We found that the solid phase place exchange approach is much more efficient at producing monofunctionalized gold nanoparticles. (1)H NMR data were used to give a semiquantitative count of substituted bifunctional ligands, and FT-IR spectra supported these findings. Furthermore, we used a diamine coupling reaction of nanoparticles to show the presence of single or multiple functional groups on the nanoparticle surface by TEM analysis.     

Adsorption characteristics of thionine on gold nanoparticles

Adsorption characteristics of thionine on gold nanoparticles have been studied by using UV-vis absorption spectroscopy, fluorescence spectroscopy, transmission electron microscopy (TEM), cyclic voltammetry and Fourier transform infrared spectroscopy. With the increasing concentration of gold nanoparticles, the absorption peak intensity of H-type dimers of thionine increases continuously, whereas that of monomers of thionine first increases and then decreases. The addition of gold nanoparticles makes the equilibrium between the monomer and H-type dimer forms of thionine move toward the dimer forms. Furthermore, the adsorption behavior of thionine on gold nanoparticles is also influenced by temperature. TEM images show that the addition of thionine results in an obvious aggregation, and further support the absorption spectral results. The fluorescence intensity of adsorbed thionine is quenched by gold nanoparticles due to the electronic interaction between thionine molecules and gold nanoparticles. Cyclic voltammetric and infrared spectroscopic studies show that the nitrogen atoms of both of the NH2 moieties of thionine strongly bind to the gold nanoparticle surfaces through the electrostatic interaction of thionine with gold nanoparticles. For 15-20 nm particles, the number of adsorbed thionine molecules per gold nanoparticle is about 7.66 x 10(4). Thionine molecules can not only bind to a particle to form a compact monolayer via both of the NH2 moieties, but they can also bind to two particles via their two NH(2) moieties, respectively.     

功能化硅壳荧光纳米粒的细胞吞噬研究

合成了氨基聚酰胺-胺(PAMAM(G1.0))和酯基(PAMAM(G1.5))功能化的两种硅壳荧光纳米粒,通过透射电镜(TEM)、纳米粒度及动电位测定仪(zeta电势)、傅立叶红外光谱仪(FTIR)和热失重分析仪(TGA)进行表征;通过透射电镜(TEM)、共聚焦显微镜(CLSM)、细胞计数试剂盒(CCK-8)实验、流式细胞计数法评价两种硅壳荧光纳米粒进入9L细胞能力的大小、在细胞内的分布情况以及细胞毒性.TEM分析表明,修饰的硅壳纳米粒大小约为60 nm左右,pH=7.4,氨基功能化的纳米粒zeta电势为+19.08,酯基功能化的为-9.01;FTIR和TGA实验进一步证明两种纳米粒被氨基和酯基的功能化.TEM和CLSM结果表明纳米粒主要存在细胞浆中,且能被溶酶体吞噬.CCK-8结果显示两种纳米粒的浓度高达1 mg/mL时仍无明显的毒性作用,且有促细胞增殖作用.流式细胞计数结果表明,细胞摄取纳米粒呈浓度和时间依赖性,氨基比酯基修饰的纳米粒更易进入细胞.     

Glassy carbon electrode modified with gold nanoparticles and DNA for the simultaneous determination of uric acid and norepinephrine under coexistence of ascorbic acid.

A novel biochemical sensor was assembled on a glass carbon electrode by a electrodeposition process. Gold nanoparticles were deposited by potential +1.5 V on the glass carbon electrode. CT-DNA was deposited by potential +1.5 V on the gold nanoparticles array electrode. The properties of the modified electrode were characterized by electrochemical impedance spectroscopy (EIS), X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). Our results showed that gold nanoparticles increase the DNA membrane capacitance and reduce the membrane resistance. This modified electrode can selectively determine uric acid and norepinephrine in the presence of a larger amount of ascorbic acid. The fabricated electrode showed good sensitivity, reproducibility, and stability.     

Biological synthesis of silver and gold nanoparticles using apiin as reducing agent

We report a novel strategy for the biological synthesis of anisotropic gold and quasi-spherical silver nanoparticles by using apiin as the reducing and stabilizing agent. The size and shape of the nanoparticles can be controlled by varying the ratio of metal salts to apiin compound in the reaction medium. The resultant nanoparticles were characterized by UV-vis-NIR, transmission electron microscopy (TEM), FT-IR spectroscopy, X-ray diffraction (XRD) and thermogravimetric analysis (TGA). The interaction between nanoparticles with carbonyl group of apiin compound was confirmed by using FT-IR analysis. TEM photograph confirming the average size of the gold and silver nanoparticles were found to be at 21 and 39 nm. The NIR absorption of the gold nanotriangles is expected to be of application in hyperthermia of cancer cells and in IR-absorbing optical coatings.     

Modification of composites of block copolymers–gold nanoparticles with enzymes and their characterization by electrochemical techniques

In this work, the poly(styrene-vynil pyridine) block copolymer was used as a porous pattern to study the electrodeposition of gold inside the pores, as a new method to obtain gold nanoparticles. The porous pattern left by the copolymer film onto a conductive glass surface was characterized by atomic force microscopy (AFM), evidencing pores of 30 nm diameter. After the electrodeposition, 30 nm diameter gold nanoparticles were obtained and they were characterized by cyclic voltammetry (CV) and AFM, and then used to study the adsorption of glucose oxidase enzyme. The adsorption process of glucose oxidase on gold nanowires was investigated by CV and electrochemical impedance spectroscopy. The morphological and capacitance results indicate that the block copolymer–gold nanoparticle composite seems to be a good candidate to design biosensors and immunosensors.     

Gold-copolymer nanoparticles: Poly(ε-caprolactone)/poly(N-vinyl-2-pyrrolydone) Biodegradable triblock copolymer as stabilizer and reductant

Block copolymers have been extensively used in the synthesis of many types of nanoparticles, where generally are considered as stabilizer and protective agent. In this work a double function of the biodegradable triblock copolymer poly(N-vinyl-2-pyrrolidone)-b-poly(ε-caprolactone)-b-poly(N-vinyl-2-pyrrolidone), (PVP–PCL–PVP) in the gold nanoparticle-copolymer synthesis is reported.Gold-copolymer composed nanoparticles were synthesized using the triblock copolymer (PVP–PCL–PVP) and potassium tetrachloro aurate (III), both in aqueous solution. The copolymer work as both, reductant and stabilizer agent. The obtained nanoparticles were characterized by FT-IR, dynamic light scattering (DLS), atomic force microscopy (AFM) and transmission electron microscopy (TEM). The shape and the size of the obtained nanoparticles are dependent on the copolymer/salt of gold concentration ratio used in the synthesis.To complement the experimental results about the copolymer role in the nanoparticles synthesis, computational tools were used to characterize the reactivity of the reactant species.     

Aqueous-mixed ionic liquid system: phase transitions and synthesis of gold nanocrystals

Micelle-vesicle-micelle (MVM) transitions are observed in the aqueous-mixed ionic liquid (1-butyl-3-methylimidazolium octyl sulfate and 3-methyl-1-octylimidazolium chloride) system. The surface activity of mixed ILs, phase behavior, and solution structures in the system have been thoroughly characterized using conductometry, tensiometry, fluorimetry, dynamic light scattering (DLS), viscometry, turbidity, atomic force microscopy (AFM), transmission electron microscopy (TEM), and (1)H NMR techniques. Synergetic interactions between the two ILs in monolayers at the air/water interface and in micelles/vesicles have been determined using the regular solution approach, and the origins of spontaneous vesicle formation in this novel system are discussed. Using a photoreduction method, the formation of stable gold nanoparticles (GNPs) and microscale nanosheets of different shapes and sizes in the micellar and vesicle solutions has been reported. The studies show the potential of a mixed IL system in constructing stable micelles/supramolecular assemblies, such as bilayer vesicles, which are effective in the preparation of the desired nanomaterials.     

Aggregation of sodium dodecylsulfate in aqueous nitric acid medium

Curcumin (Cur) shows low anticancer activity in vivo due to its reduced systemic bioavailability stemmed from its poor aqueous solubility and instability. Suitably functionalized nanocarriers designed to empty the drug specifically at tumor sites can potentially enhance the antitumor activity of Cur. We devised a simple method for the fabrication of water soluble Cur conjugated gold nanoparticles to target various cancer cell lines. Cur was conjugated to hyaluronic acid (HA) to get a water soluble conjugate (HA-Cur). We generated gold nanoparticles (AuNPs) by reducing chloroauric acid using HA-Cur, which played the dual role of a reducing and stabilizing agent and subsequently anchored folate conjugated PEG. These entities were probed using different analytical techniques, assayed the blood compatibility and cytotoxicity. Their interaction with cancer cell lines (HeLa cells, glyoma cells and Caco 2 cells) was followed by flow cytometry and confocal microscopy. Blood-materials interactions studies showed that the nanoparticles are highly hemocompatible. Flow cytometry and confocal microscopy results showed significant cellular uptake and internalization of the particles by cells. HA-Cur@AuNPs exhibited more cytotoxicity comparing to free Cur. The strategy, we adopted here, resulted the formation blood compatible Cur conjugated AuNPs with enhanced targeting and improved efficacy.