Dynamic response of a rigid plastic simply supported imperfect beam subjected to a uniform intense dynamic loading

This paper proposes a theoretical analysis for the dynamic response of a rigid perfectly plastic simply supported beam with an imperfection in the midspan cross-section under uniform step, pulse, and impulsive loading when support is assumed to be free to move inward. The complete solutions for an entire dynamic response process are given and the relationship between the distribution of energy dissipated at plastic hinges and the parameter of imperfection is also discussed.     

任意有限个平行移动荷载作用下简支梁绝对最大挠度的解析算法研究

利用能量原理中的最小势能原理以及多元函数的极值原理,得到了简支梁在任意有限个平行移动荷载作用下的挠度方程与绝对最大挠度的解析算式。建立的可能位移函数既满足了位移几何边界条件,又满足了静力边界条件,故足可以保证简支梁的挠度计算精度。     

Analytical solutions for plane problem of functionally graded magnetoelectric cantilever beam

In this paper, an exact analytical solution is presented for a transversely isotropic functionally graded magneto-electro-elastic (FGMEE) cantilever beam, which is subjected to a uniform load on its upper surface, as well as the concentrated force and moment at the free end. This solution can be applied for any form of gradient distribution. For the basic equations of plane problem, all the partial differential equations governing the stress field, electric, and magnetic potentials are derived. Then, the expressions of Airy stress, electric, and magnetic potential functions are assumed as quadratic polynomials of the longitudinal coordinate. Based on all the boundary conditions, the exact expressions of the three functions can be determined. As numerical examples, the material parameters are set as exponential and linear distributions in the thickness direction. The effects of the material parameters on the mechanical, electric, and magnetic fields of the cantilever beam are analyzed in detail.     

Analytical solution for functionally graded anisotropic cantilever beam subjected to linearly distributed load

The bending problem of a functionally graded anisotropic cantilever beam subjected to a linearly distributed load is investigated.The analysis is based on the exact elasticity equations for the plane stress problem.The stress function is introduced and assumed in the form of a polynomial of the longitudinal coordinate.The expressions for stress components are then educed from the stress function by simple differentiation. The stress function is determined from the compatibility equation as well as the bound- ary conditions by a skilful deduction.The analytical solution is compared with FEM calculation,indicating a good agreement.     

逐段变形效应叠加法在简支梁的应用

逐段变形效应叠加法可应用于简支梁.分别计算了受对称载荷、非对称载荷的阶梯简支梁中截面的挠度及受对称载荷作用的阶梯简支梁端截面的转角.逐段变形效应叠加法可计算受任意载荷的阶梯简支梁中截面的挠度和端截面的转角.     

POLYNOMIAL SOLUTIONS TO PIEZOELECTRIC BEAMS (Ⅱ)——ANALYTICAL SOLUTIONS TO TYPICAL PROBLEMS

IntroductionThis paper is a continuation of Ref.[1],in which a series of orthotropic piezoelectricplane problems was solved and the corresponding exact solutions were obtained with the trial-and-error method,on the basis of the general solution expressed …     

Analytical modeling of sandwich beam for piezoelectric bender elements

Piezoelectric bender elements are widely used as electromechanical sensors and actuators.An analytical sandwich beam model for piezoelectric bender elements was developed based on the first-order shear deformation theory(FSDT),which assumes a single rotation angle for the whole cross-section and a quadratic distribution function for coupled electric potential in piezoelectric layers,and corrects the effect of transverse shear strain on the electric displacement integration.Free vibration analysis of simply- supported bender elements was carried out and the numerical results showed that,solu- tions of the present model for various thickness-to-length ratios are compared well with the exact two-dimensional solutions,which presents an efficient and accurate model for analyzing dynamic electromechanical responses of bender elements.     

Wave propagation analysis of porous functionally graded piezoelectric nanoplates with a visco-Pasternak foundation

This study investigates the size-dependent wave propagation behaviors under the thermoelectric loads of porous functionally graded piezoelectric(FGP) nanoplates deposited in a viscoelastic foundation. It is assumed that(i) the material parameters of the nanoplates obey a power-law variation in thickness and(ii) the uniform porosity exists in the nanoplates. The combined effects of viscoelasticity and shear deformation are considered by using the Kelvin-Voigt viscoelastic model and the refined hi...     

Effects of thermo-magneto-electro nonlinearity characteristics on the stability of functionally graded piezoelectric beam

Due to the increasing interests in using functionally graded piezoelectric materials(FGPMs) in the design of advanced micro-electro-mechanical systems, it is important to understand the stability behaviors of the FGPM beams. In this study, considering the effects of geometrical nonlinearity, temperature, and electricity in the constitutive relations and the effect of the magnetic field on the FGPM beam, the Euler-Bernoulli beam model is adopted, and the nonlinear governing equation of motion is ...     

基于一种广义梁理论的弹性地基FGM简支梁自由振动解析解

基于一种扩展的n阶广义剪切变形梁理论(n-GBT),应用Hamilton原理,建立了以轴向位移、横向位移及转角为未知函数的Winkler-Pasternak弹性地基功能梯度材料(FGM)梁的自由振动方程,采用Navier法获得了弹性地基FGM简支梁自由振动的精确解。与多种梁理论预测结果进行比较,讨论并给出了GBT阶次n的理想取值;分析了梯度指标、跨厚比及地基刚度对FGM梁频率的影响。结果表明:本文方法有效且适用范围广,若采用高阶剪切梁理论模型,宜取n≥3的奇数;FGM梁的自振频率随材料梯度指标的增大而减小;随跨厚比的增加而增大,但当跨厚比大于20,跨厚比增加对频率的影响很小;随地基刚度的增加而增大,地基刚度足够大时,频率趋于收敛。     

Several three-dimensional solutions for transversely isotropic functionally graded material plate welded with circular inclusion

The problem of a transversely isotropic functionally graded material (FGM) plate welded with a circular inclusion is considered. The analysis starts with the generalized England-Spencer plate theory for transversely isotropic FGM plates, which expresses a three-dimensional (3D) general solution in terms of four analytic functions. Several analytical solutions are then obtained for an infinite FGM plate welded with a circular inclusion and subjected to the loads at infinity. Three different cases are considered, i.e., a rigid circular inclusion fixed in the space, a rigid circular inclusion rotating about the x-, y-, and z-axes, and an elastic circular inclusion with different material constants from the plate itself. The static responses of the plate and/or the inclusion are investigated through numerical examples.     

Analytical solution for bending beam subject to lateral force with different modulus

A bending beam, subjected to state of plane stress, was chosen to investigate. The determination of the neutral surface of the structure was made, and the calculating formulas of neutral axis, normal stress, shear stress and displacement were derived. It is concluded that, for the elastic bending beam with different tension-compression modulus in the condition of complex stress, the position of the neutral axis is not related with the shear stress, and the analytical solution can be derived by normal stress used as a criterion,improving the multiple cyclic method which determines the position of neutral point by the principal stress. Meanwhile, a comparison is made between the results of the analytical solution and those calculated from the classic mechanics theory, assuming the tension modulus is equal to the compression modulus, and those from the finite element method (FEM) numerical solution. The comparison shows that the analytical solution considers well the effects caused by the condition of different tension and compression modulus. Finally, a calculation correction of the structure with different modulus is proposed to optimize the structure.     

一种具有新型动力放大器压电悬臂梁俘能器计算模型和解析解

为了提高压电振动能量俘获的效率,提出了一种新型的压电悬臂梁俘能器。新的压电俘能器在悬臂梁固定端安装一个新型动力放大器系统,另一端带有一个有限尺寸的质量块。新型动力放大器由平移及转动约束的弹簧-质量块系统组成。考虑有限尺寸质量块的质量分布效应和平移及转动约束的弹簧刚度等结构参数的影响,利用广义Hamilton原理,针对带有新型动力放大器的压电式悬臂梁俘能器,建立了分布参数型运动微分方程,获得了相应的特征函数,分析了自振频率和能量俘获效果。分析结果表明,考虑质量块偏心距和转动惯量可提高能量俘获效率的预测精度;合理选择动力放大器的平移及转动弹簧刚度可提高能量俘获的效率,降低俘能器的共振频率。     

Homogenized and classical expressions for static bending solutions for functionally graded material Levinson beams

The exact relationship between the bending solutions of functionally graded material (FGM) beams based on the Levinson beam theory and those of the corresponding homogenous beams based on the classical beam theory is presented for the material properties of the FGM beams changing continuously in the thickness direction. The deflection, the rotational angle, the bending moment, and the shear force of FGM Levinson beams (FGMLBs) are given analytically in terms of the deflection of the reference homogenous Euler-Bernoulli beams (HEBBs) with the same loading, geometry, and end supports. Consequently, the solution of the bending of non-homogenous Levinson beams can be simplified to the calculation of transition coefficients, which can be easily determined by variation of the gradient of material properties and the geometry of beams. This is because the classical beam theory solutions of homogenous beams can be easily determined or are available in the textbook of material strength under a variety of boundary conditions. As examples, for different end constraints, particular solutions are given for the FGMLBs under specified loadings to illustrate validity of this approach. These analytical solutions can be used as benchmarks to check numerical results in the investigation of static bending of FGM beams based on higher-order shear deformation theories.     

Free vibration of functionally graded beams based on both classical and first-order shear deformation beam theories

The free vibration of functionally graded material （FGM） beams is studied based on both the classical and the first-order shear deformation beam theories. The equations of motion for the FGM beams are derived by considering the shear deforma- tion and the axial, transversal, rotational, and axial-rotational coupling inertia forces on the assumption that the material properties vary arbitrarily in the thickness direction. By using the numerical shooting method to solve the eigenvalue problem of the coupled ordinary differential equations with different boundary conditions, the natural frequen- cies of the FGM Timoshenko beams are obtained numerically. In a special case of the classical beam theory, a proportional transformation between the natural frequencies of the FGM and the reference homogenous beams is obtained by using the mathematical similarity between the mathematical formulations. This formula provides a simple and useful approach to evaluate the natural frequencies of the FGM beams without dealing with the tension-bending coupling problem. Approximately, this analogous transition can also be extended to predict the frequencies of the FGM Timoshenko beams. The numerical results obtained by the shooting method and those obtained by the analogous transformation are presented to show the effects of the material gradient, the slenderness ratio, and the boundary conditions on the natural frequencies in detail.     

Free vibration analysis of functionally graded material beams based on Levinson beam theory

Free vibration response of functionally graded material (FGM) beams is studied based on the Levinson beam theory (LBT). Equations of motion of an FGM beam are derived by directly integrating the stress-form equations of elasticity along the beam depth with the inertial resultant forces related to the included coupling and higherorder shear strain. Assuming harmonic response, governing equations of the free vibration of the FGM beam are reduced to a standard system of second-order ordinary differential equations associated with boundary conditions in terms of shape functions related to axial and transverse displacements and the rotational angle. By a shooting method to solve the two-point boundary value problem of the three coupled ordinary differential equations, free vibration response of thick FGM beams is obtained numerically. Particularly, for a beam with simply supported edges, the natural frequency of an FGM Levinson beam is analytically derived in terms of the natural frequency of a corresponding homogenous Euler-Bernoulli beam. As the material properties are assumed to vary through the depth according to the power-law functions, the numerical results of frequencies are presented to examine the effects of the material gradient parameter, the length-to-depth ratio, and the boundary conditions on the vibration response.     

某简支组合梁桥荷载试验研究

以某简支组合梁桥为工程背景,基于现场荷载试验方法,对该桥加固后的实际承载力进行了研究。首先,详细介绍了试验过程中应变和挠度测点的布置方式;然后,利用荷载效应等效原则,结合组合简支梁桥结构的内力分布特点,确定了现场荷载试验中典型截面的最不利荷载工况。最后,将试验结果与理论计算结果进行了对比分析。研究结果表明,静载试验的应变实测值和挠度实测值均小于理论计算值,满足相关规范要求;桥梁结构整体强度和刚度满足设计荷载及正常使用的要求;该桥的跨中横向分布系数分布不均匀,且其横向传递剪力能力较弱。     

Thermo-electromechanical behavior of functionally graded piezoelectric hollow cylinder under non-axisymmetric loads

This paper presents an analytical solution of a thick walled cylinder com- posed of a functionally graded piezoelectric material (FGPM) and subjected to a uniform electric field and non-axisymmetric thermo-mechanical loads. All material properties, except Poisson's ratio that is assumed to be constant, obey the same power law. An exact solution for the resulting Navier equations is developed by the separation of variables and complex Fourier series. Stress and strain distributions and a displacement field through the cylinder are obtained by this technique. To examine the analytical approach, different examples are solved by this method, and the results are discussed.     

Exact solution for in-plane static problems of circular beams made of functionally graded materials

Exact analytical solutions of in-plane static problems of circular beams with uniform cross-section made of functionally graded material (FGM) are obtained. Material properties are assumed to be varying arbitrarily through the thickness. The effects of axial extension and shear deformations are considered. The differential equation system is solved exactly using the initial values method. The circumferential stress distribution on the cross-section is also obtained. The results are compared with those of rather complex approaches in the literature, such as elasticity approach, and the comparison shows an excellent agreement. Effects of power law exponent and radius-to-height ratio of the beam on circumferential stress distribution and displacements are investigated.