Solubilization of single-walled carbon nanotubes by using polycyclic aromatic ammonium amphiphiles in water--strategy for the design of high-performance solubilizers

We describe the design of polycyclic aromatic compounds with high performance that dissolve single-walled carbon nanotubes (SWNTs). Synthetic amphiphiles trimethyl-(2-oxo-2-phenylethyl)-ammonium bromide (1) and trimethyl-(2-naphthalen-2-yl-2-oxo-ethyl)-ammonium bromide (2) carrying a phenyl or a naphtyl moiety were not able to dissolve/disperse SWNTs in water. By contrast, trimethyl-(2-oxo-2-phenanthren-9-yl-ethyl)-ammonium bromide (3) solubilized SWNTs, although the solubilization ability was lower than that of trimethyl-(2-oxo-2-pyrene-1-yl-ethyl)-ammonium bromide (4) (solubilization behavior observed by using 4 was described briefly in reference 4a). Transmission electron microscopy (TEM), as well as visible/near-IR, fluorescence, and near-IR photoluminescence spectroscopies were employed to reveal the solubilization properties of 4 in water, and to compare these results with those obtained by using sodium dodecyl sulfate (SDS) and hexadecyltrimethylammonium bromide (HTAB) as solubilizers. Compound 4 solubilized both the as-produced SWNTs (raw-SWNTs) and purified SWNTs under mild experimental conditions, and the solubilization ability was better than that of SDS and HTAB. Near-IR photoluminescence measurements revealed that the chiral indices of the SWNTs dissolved in an aqueous solution of 4 were quite different from those obtained by using micelles of SDS and HTAB; for a SWNTs/4 solution, the intensity of the (7,6), (9,5), and (12,1) indices were strong and the chirality distribution was narrower than those of the micellar solutions. This indicates that the aqueous solution of 4 has a tendency to dissolve semiconducting SWNTs with diameters in the range of 0.89-1.0 nm, which are larger than those SWNTs (0.76-0.97 nm) dissolved in the aqueous micelles of SDS and HTAB.     

Individual dissolution of single-walled carbon nanotubes in aqueous solutions of steroid or sugar compounds and their Raman and near-IR spectral properties

The individual solubilization of single-walled carbon nanotubes (SWNTs), achieved by using ten different anionic-, zwitterionic-, and nonionic-steroid biosurfactants and three different sugar biosurfactants, was examined. Aqueous micelles of anionic cholate analogues, such as sodium cholate (SC), sodium deoxycholate (SDC), sodium taurocholate (STC), sodium taurodeoxycholate (STDC), sodium glycocholate (SGC), as well as N,N-bis(3-D-gluconamidopropyl)cholamide (BIGCHAP) and N,N-bis(3-D-gluconamidopropyl)deoxycholamide (deoxy-BIGCHAP), exhibited good abilities to dissolve the SWNTs individually. Aqueous micelles of nonionic biosurfactants, such as sucrose monocholate (SMC), n-octyl-beta-D-glucoside (OG), n-decyl-beta-D-maltoside (DM), and n-decanoyl-N-methylglucamide (MEGA-10), could dissolve the SWNTs, however, the solubilization abilities were weaker than those of the anionic cholate analogues. In sharp contrast, the solubilization abilities of the zwitterionic micelles of 3-[(3-cholamidopropyl)dimethylammonio]propanesulfonic acid (CHAPS) and 3-[(3-cholamidopropyl)dimethylammonio]-2-hydroxypropanesulfonic acid (CHAPSO) were very low, and almost zero for OG. It is evident that the chemical structures, in particular the substituent groups of the surfactants, play an important role in the solubilization of SWNTs. The near-IR photoluminescence behaviors of the SWNTs dissolved in aqueous micelles and in 1 mM biosurfactants were investigated. The chirality indices of the SWNTs dissolved in these solutions depend on the chemical structures of the biosurfactants. The Raman spectra of the SWNTs dissolved in a 1 mM solution of SC suggest the selective extraction of the metallic SWNTs. Finally, a possible solubilization mechanism using steroid surfactants is described. The SWNTs dissolved individually in water-containing biocompounds are useful in many areas of nano- and materials chemistry.     

Solubilization of single-wall carbon nanotubes by supramolecular encapsulation of helical amylose

We have developed a simple, efficient process for solubilization of single-wall carbon nanotubes (SWNTs) with amylose in aqueous DMSO. This process requires two important conditions, presonication of SWNTs and subsequent amylose treatment in an optimum mixture of DMSO/H2O. The former step separates SWNT bundles, and the latter step provides a maximum cooperative interaction of SWNTs with amylose, leading to the immediate and complete solubilization. The best solvent condition for this is around 10-20% DMSO, in which amylose assumes a random conformation or an interrupted helix. This indicates that the amylose helix is not the prerequisite for encapsulation of SWNTs. The SEM and AFM images of the encapsulated SWNTs manifest loosely twisted ribbons wrapping around SWNTs, which are locally intertwined as a multiple twist, but no clumps of the host amylose are seen on SWNT capsules.     

Coating single-walled carbon nanotubes with phospholipids

Single-walled carbon nanotubes (SWNTs), being hydrophobic by nature, aggregate in water to form large bundles. However, isolated SWNTs possess unique physical and chemical properties that are desirable for sensing and biological applications. Conventionally isolated SWNTs can be obtained by wrapping the tubes with biopolymers or surfactants. The binding modes proposed for these solubilization schemes, however, are less than comprehensive. Here we characterize the efficacies of solubilizing SWNTs through various types of phospholipids and other amphiphilic surfactants. Specifically, we demonstrate that lysophospholipids, or single-chained phospholipids offer unprecedented solubility for SWNTs, while double-chained phospholipids are ineffective in rendering SWNTs soluble. Using transmission electron microscopy (TEM) we show that lysophospholipids wrap SWNTs as striations whose size and regularity are affected by the polarity of the lysophospholipids. We further show that wrapping is only observed when SWNTs are in the lipid phase and not the vacuum phase, suggesting that the environment has a pertinent role in the binding process. Our findings shed light on the debate over the binding mechanism of amphiphilic polymers and cylindrical nanostructures and have implications on the design of novel supramolecular complexes and nanodevices.     

Changes in the fluorescence spectrum of individual single-wall carbon nanotubes induced by light-assisted oxidation with hydroperoxide

Through fluorescence-spectrum measurements, we investigated the effects of light-assisted oxidation with H2O2 (LAOx) on single-wall carbon nanotubes (SWNTs) that were individually dispersed in an aqueous solution of surfactant. The intensities of the fluorescence spectra were decreased remarkably by the LAOx when the light's wavelength was 400-500 nm and a little when 600-700 nm. The spectrum intensity did not recover even when the pH was restored to an original value of 6.5. The spectra changed little when the LAOx wavelength was 500-600 nm or the light was not irradiated. In addition, the effect of LAOx on SWNTs was related to the diameters of SWNTs. We inferred that these phenomena reflected that H2O2 was dissociated by absorbing the fluorescence light emitted from optically excited SWNTs, which, in turn, accelerated the burning out of SWNTs.     

单壁碳纳米管中甲烷吸附的分子模拟

采用巨正则系统MonteCarlo方法研究了甲烷在单壁碳纳米管(Singlewallcarbonnanotube,SWNT)中于低温74.05K下的吸附等温线及吸附机理,发现在两个较小的孔径(1.225nm和1.632nm)下单壁碳纳米管中甲烷的吸附有着明显的微孔所独有的“填充效应”,而在2.04nm以上的孔的吸附中会出现毛细凝聚现象。通过模拟知道发生毛细凝聚的必要条件是孔内能至少容纳下两层粒子,此外还导出在恒定温度下毛细凝聚吸附量与SWNT孔径关系。本文还模拟了常温300K下甲烷在SWNT内的吸附,对比了2.04nm和4.077nm两种孔径的SWNT吸附甲烷的等温线,推荐在4.077nm孔中的适宜吸附存储压力为5.0～6.0MPa,吸附质量分数可达16%～19%.     

Block‐Copolymer‐Assisted Solubilization of Carbon Nanotubes and Exfoliation Monitoring Through Viscosity

Summary: The use of the block copolymers polystyrene‐block‐poly(ethylene oxide) and poly(methyl methacrylate)‐block‐poly(ethylene oxide) is described to assist the direct solubilization of single‐walled carbon nanotubes (SWNTs) into water under ultrasonic irradiation. As compared to surfactants and homopolymers, the block copolymer systems may offer the potential of additional unique morphologies through self‐assembly. TEM and AFM analyses of solution‐cast samples indicate exfoliation and wetting of the SWNTs by the block copolymer. With increasing duration of ultrasonic irradiation, an increase in solution viscosity is initially found, which suggests that it is a convenient indicator of the progress of exfoliation of the SWNTs. With continued intense ultrasonic irradiation, the solution viscosity may decrease apparently because of damage/breakage of the SWNTs.

Schematic of the interaction of the PMMA‐b‐PEO block copolymer with the single‐walled carbon nanotubes and the specific viscosity of the system in aqueous solution as a function of sonication time: results from using an ultrasound bath (‐‐‐‐▪‐‐‐‐) or an ultrasound horn (—▴—).     

The effect of catalyst concentration on the synthesis of single-wall carbon nanotubes

Single wall carbon nanotubes (SWNTs) were synthesized by electric arc discharge method with a mixture of nickel and yttrium as catalysts. The effect of the catalyst concentration on the synthesis of SWNTs was studied. Raman spectra of SWNTs have been recorded with excitation wavelengths from 476.5 to 1064 nm. The Raman peaks of the radial breathing modes (RBM) of SWNTs were assigned. The results indicate that the diameter distribution of SWNTs is in the range of 1.2-1.6 nm, and the SWNTs with diameter 1.43 nm are in the majority. The catalyst concentrations have large effect on the yield of SWNTs and little effect on the diameter distribution of SWNTs.     

Separation of Semiconducting Single‐Walled Carbon Nanotubes by Using a Long‐Alkyl‐Chain Benzenediazonium Compound

We designed and synthesized 4‐dodecyloxybenzenediazonium tetrafluoroborate ( 1 ), which preferentially reacts with metallic single‐walled carbon nanotubes (SWNTs) by kinetic control. We first determined the suitable experimental conditions for the preferential reaction of 1 with individually dissolved SWNTs by monitoring the decrease in absorbance for the metallic SWNT in the range of 400–650 nm in the absorption spectrum of the SWNTs. The reacted SWNTs were thoroughly rinsed with THF to obtain THF‐insoluble SWNTs. The Raman spectrum of the THF‐insoluble SWNTs showed a strong peak near 180 cm^?1, which corresponds to a semiconducting breathing band. The metallic breathing bands (≈220 cm^?1) and Breit–Wingner–Fano (BWF) modes (1520 cm^?1) corresponding to the metallic SWNTs were much weaker than those of the pristine SWNTs. We also confirmed that metallic peaks in the range of 400–650 nm in the absorption spectrum of THF‐insoluble SWNTs that were individually dissolved in an aqueous micelle of sodium cholate were almost nondetectable. All the results indicate that the THF‐insoluble SWNTs are semiconducting.     

Assessment of chemically separated carbon nanotubes for nanoelectronics

It remains an elusive goal to obtain high performance single-walled carbon-nanotube (SWNT) electronics such as field effect transistors (FETs) composed of single- or few-chirality SWNTs, due to broad distributions in as-grown materials. Much progress has been made by various separation approaches to obtain materials enriched in metal or semiconducting nanotubes or even in single chiralties. However, research in validating SWNT separations by electrical transport measurements and building functional electronic devices has been scarce. Here, we performed length, diameter, and chirality separation of DNA functionalized HiPco SWNTs by chromatography methods, and we characterized the chiralities by photoluminescence excitation spectroscopy, optical absorption spectroscopy, and electrical transport measurements. The use of these combined methods provided deeper insight to the degree of separation than either technique alone. Separation of SWNTs by chirality and diameter occurred at varying degrees that decreased with increasing tube diameter. This calls for new separation methods capable of metallicity or chirality separation of large diameter SWNTs (in the approximately 1.5 nm range) needed for high performance nanoelectronics. With most of the separated fractions enriched in semiconducting SWNTs, nanotubes placed in parallel in short-channel (approximately 200 nm) electrical devices fail to produce FETs with high on/off switching, indicating incomplete elimination of metallic species. In rare cases with a certain separated SWNT fraction, we were able to fabricate FET devices composed of small-diameter, chemically separated SWNTs in parallel, with high on-/off-current (I(on)/I(off)) ratios up to 105 owing to semiconducting SWNTs with only a few (n,m) chiralities in the fraction. This was the first time that chemically separated SWNTs were used for short channel, all-semiconducting SWNT electronics dominant by just a few (n,m)'s. Nevertheless, the results suggest that much improved chemical separation methods are needed to produce nanotube electronics at a large scale.     

Preparation of single‐walled carbon nanotubes‐induced poly(p‐oxybenzoyl) crystals

Crystallization of oligomers was applied for the preparation of single‐walled carbon nanotubes (SWNTs)/poly(p‐oxybenzoyl) (POB) crystals using SWNTs as a nucleating agent. Polymerization conditions were investigated to induce the crystallization of POB oligomers through SWNTs. SWNTs/POB plate‐like or lozenge‐shaped crystals were successfully prepared by direct polymerization of p‐hydroxybenzoic acid (HBA) in a mixed solvent of DMF/Py with TsCl in the presence of functionalized SWNTs. The size of the plate‐like crystals were ～200 nm to 3 μm. The crystals consisted of some layers, ～3 nm thick plates. Model reactions showed that esterification reactions proceed between functionalized SWNTs and HBA monomers in the polymerization system. The obtained crystals exhibited unique morphology and high crystallinity, producing a novel SWNT/POB hybrid. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1265–1277, 2008     

Solubilization by polysoaps

The aqueous solubilization power of several series of micellar homopolymers and copolymers (polysoaps) is investigated. Using five insoluble or poorly water-soluble dyes, comparisons of the capacities are made with respect ot the influence of structural variables such as the polymer backbone, the polymer geometry, the comonomer content, and the charge of the hydrophilic group. Some guidelines for polysoap structures suited for efficient solubilization are established. Noteworthy is that the solubilization capacities of the polysoaps are neither linked to the ability to reduce the surface tension of water, nor to the polarity of the solubilization sites deduced from spectroscopic probes.     

Protein electrochemistry using aligned carbon nanotube arrays

The remarkable electrocatalytic properties and small size of carbon nanotubes make them ideal for achieving direct electron transfer to proteins, important in understanding their redox properties and in the development of biosensors. Here, we report shortened SWNTs can be aligned normal to an electrode by self-assembly and act as molecular wires to allow electrical communication between the underlying electrode and redox proteins covalently attached to the ends of the SWNTs, in this case, microperoxidase MP-11. The efficiency of the electron transfer through the SWNTs is demonstrated by electrodes modified with tubes cut to different lengths having the same electron-transfer rate constant.     

Room-temperature assembly of directional carbon nanotube strings

Micromold with microchannels was employed in assembly of directional free-standing single-walled carbon nanotube (SWNT) strings at room temperature. The new postgrowth assembly approach could, in principle, apply not only to a wide range of SWNTs in their soluble or dispersible forms, including small diameter (0.7-0.8 nm) SWNTs, covalent- and noncovalent-functionalized SWNTs, monodispersed SWNTs with identical diameter and chirality, and fullerenes@SWNTs, which either cannot survive the high-temperature treatment or cannot be synthesized by current CVD method, but also to other soluble or dispersible one-dimensional nanostructures.     

Optical properties of ultrashort semiconducting single-walled carbon nanotube capsules down to sub-10 nm

Single-walled carbon nanotubes (SWNTs) are typically long (greater than or approximately equal 100 nm) and have been well established as novel quasi one-dimensional systems with interesting electrical, mechanical, and optical properties. Here, quasi zero-dimensional SWNTs with finite lengths down to the molecular scale (7.5 nm in average) were obtained by length separation using a density gradient ultracentrifugation method. Different sedimentation rates of nanotubes with different lengths in a density gradient were taken advantage of to sort SWNTs according to length. Optical experiments on the SWNT fractions revealed that the UV-vis-NIR absorption and photoluminescence peaks of the ultrashort SWNTs blue-shift up to approximately 30 meV compared to long nanotubes, owing to quantum confinement effects along the length of ultrashort SWNTs. These nanotube capsules essentially correspond to SWNT quantum dots.     

Supramolecular hybrid of gold nanoparticles and semiconducting single-walled carbon nanotubes wrapped by a porphyrin-fluorene copolymer

We describe the design, synthesis, and characterization of a supramolecular hybrid of gold nanometals and semiconducting single-walled carbon nanotubes (SWNTs) wrapped by a porphyrin-fluorene copolymer (1), as well as fabrication of a thin-film transistor (TFT) device using the hybrid. Photoluminescence mapping revealed that the copolymer selectively dissolved SWNTs with chirality indices of (8,6), (8,7), (9,7), (7,6), and (7,5); dissolution of (8,6), and (8,7) SWNTs was especially efficient. The solubilized SWNTs were connected to gold nanoparticles (AuNPs) via a coordination bond to prepare a supramolecular hybrid composed of AuNPs/copolymer 1-wrapped SWNTs, which were studied by atomic force and scanning and transmission electron microscopies. A fabricated TFT device using the semiconducting SWNTs/copolymer 1 shows evident p-type transport with an On/Off ratio of ~10(5). The transport properties of the TFT changed after coordination of the AuNPs with the SWNTs/copolymer 1.     

Phonon vibrational frequencies of all single-wall carbon nanotubes at the lambda point: reduced matrix calculations

With a simple method-the reduced matrix method, we simplified the calculation of the phonon vibrational frequencies according to SWNTs structure and their phonon symmetric property and got the dispersion properties of all SWNTs at Gamma point in Brillouin zone, whose diameters lie between 0.6 and 2.5 nm. The calculating time is shrunk about 2-4 orders. A series of the dependent relationships between the diameters of SWNTs and the frequencies of Raman and IR active modes are given. Several fine structures including "glazed tile" structures in omega approximately d figures are found, which might predict a certain macro-quantum phenomenon of the phonons in SWNTs.     

Large‐Scale Production of Homogeneous Helical Amylose/SWNTs Complexes with Good Biocompatibility

The key to developing novel applications of SWNTs in biotechnology and biomedicine is to improve their biocompatibility and solubility in water and to assemble them into useful architectures. We describe how amylose can help to solubilize SWNTs and wrap around SWNTs into helical superstructures with periodic pitch. FT‐IR, Raman spectroscopy, ¹H NMR and HR‐TEM are used to confirm the generation of amylose/SWNTs complexes (A/S‐C). It is demonstrated that most of the A/S‐C have similar diameters (ca. 20–30 nm) and a helical morphology with a pitch of ca. 14 nm. A test of Hela cell viability revealed that the A/S‐C had much better biocompatibility than SWNTs.

     

Formation of Coaxial Nanocables with Amplified Supramolecular Chirality through an Interaction between Carbon Nanotubes and a Chiral π‐Gelator

In an attempt to gather experimental evidence for the influence of carbon allotropes on supramolecular chirality, we found that carbon nanotubes (CNTs) facilitate amplification of the molecular chirality of a π‐gelator ( MC‐OPV ) to supramolecular helicity at a concentration much lower than that required for intermolecular interaction. For example, at a concentration 1.8×10^?4 m , MC‐OPV did not exhibit a CD signal; however, the addition of 0–0.6 mg of SWNTs resulted in amplified chirality as evident from the CD spectrum. Surprisingly, AFM analysis revealed the formation of thick helical fibers with a width of more than 100 nm. High‐resolution TEM analysis and solid‐state UV/Vis/NIR spectroscopy revealed that the thick helical fibers were cylindrical cables composed of individually wrapped and coaxially aligned SWNTs. Such an impressive effect of CNTs on supramolecular chirality and cylindrical‐cable formation has not been reported previously.     

Rational concept to recognize/extract single-walled carbon nanotubes with a specific chirality

Single-walled carbon nanotubes (SWNTs) have remarkable and unique electronic, mechanical, and thermal properties, which are closely related to their chiralities; thus, the chirality-selective recognition/extraction of the SWNTs is one of the central issues in nanotube science. However, any rational materials design enabling one to efficiently extract/solubilize pure SWNT with a desired chirality has yet not been demonstrated. Herein we report that certain chiral polyfluorene copolymers can well-recognize SWNTs with a certain chirality preferentially, leading to solubilization of specific chiral SWNTs. The chiral copolymers were prepared by the Ni(0)-catalyzed Yamamoto coupling reaction of 2,7-dibromo-9,9-di-n-decylfluorene and 2,7-dibromo-9,9-bis[(S)-(+)-2-methylbutyl]fluorene comonomers. The selectivity of the SWNT chirality was mainly determined by the relative fraction of the achiral and chiral side groups. By a molecular mechanics simulation, the cooperative interaction between the fluorene moiety, alkyl side chain, and graphene wall were responsible for the recognition/dissolution ability of SWNT chirality. This is a first example describing the rational design and synthesis of novel fluorene-based copolymers toward the recognition/extraction of targeted (n,?m) chirality of the SWNTs.