Microchip capillary electrophoresis coupled with an end-column electrochemiluminescence detection

An easy and universal wall-jet configuration for microchip CE-ECL detection system was constructed and investigated in this work. Two detection modes of pre-column and post-column were applied to the above system. TPA, tramadol and lidocaine were chosen as model analytes to estimate the system in both modes. The important operational parameters such as the concentration of luminescent reagent and the distance between the separation outlet and the working electrode were optimally obtained and compared for the first time.     

A sensitive method for simultaneous determination of four macrolides by CE with electrochemiluminescence detection and its applications in human urine and tablets

A sensitive method for simultaneous determination of azithromycin (AZI), acetylspiramycin (ACE), erythromycin (ERY), and josamycin (JOS) was developed by CE coupled with electrochemiluminescence detection with Ru(bpy)₃²⁺. The parameters related to separation and detection were investigated in detail. The four macrolides were well separated and detected within 6 min under the optimized conditions. The LOD (S/N=3) of AZI, ACE, ERY, and JOS were 1.2×10^?9, 7.1×10^?9, 3.9×10^?8 and 9.5×10^?8 mol/L, respectively. The LOQ (S/N=10) of AZI, ACE, ERY, and JOS in human urine were 8.2×10^?8, 2.5×10^?7, 8.9×10^?7 and 1.2×10^?6 mol/L, respectively. The recoveries of the four macrolides in human urine and pharmaceutical tablet samples were 85.0–104.0% at different concentration levels.     

Determination of galanthamine in Bulbus Lycoridis Radiatae by coupling capillary electrophoresis with end‐column electrochemiluminescence detection

A novel method for the determination of galanthamine (GAL) in Bulbus Lycoridis Radiatae has been developed based on coupling CE with an end‐column tris(2,2′‐bipyridyl)ruthenium(II) electrochemiluminescence (ECL). Parameters affecting CE separation and ECL detection were investigated and optimized. Baseline separation of GAL from other components in the Bulbus Lycoridis Radiatae sample was achieved with an 18 mmol/L phosphate running buffer at pH 9.0. Under the optimized conditions: 12 kV CE‐separation voltage, ECL detection potential at 1.25 V with 5 mmol/L and 50 mmol/L phosphate buffer at pH 7.5 in the detection reservoir, the linear range of GAL concentration was from 0.8 ng/mL to 2 μg/mL, whereas the detection limit was 0.25 ng/mL (S/N=3). The proposed method was successfully demonstrated for the determination of GAL in Bulbus Lycoridis Radiatae.     

Determination of benzhexol hydrochloride by capillary zone electrophoresis with an end-column electrochemiluminescence detection

A capillary zone electrophoresis with end-column electrochemiluminescence (ECL) detector was described for the determination of benzhexol hydrochloride. The detection was based on the tris(2,2′-bypyridine)ruthenium(II) [Ru(bpy)₃²⁺] ECL reaction with the analyte. Electrophoresis was performed using a 25 μm i.d. uncoated capillary. 10 mM sodium phosphate buffer (pH=8.0) was used as the running buffer. The solution in the detection cell was 80 mM sodium phosphate (pH=8.0) and 5 mM Ru(bpy)₃²⁺. A linear calibration curve of three-orders of magnitude was obtained (with a correlation coefficient of >0.999) from 1.0×10⁻⁸ to 1.0×10⁻⁵ M and the limit of detection was 6.7×10⁻⁹ M (S/N=3). This just provides an easy and sensitive method to determine the active ingredient in pharmaceutical formulations.     

Sensitive determination of tilmicosin,erythromycin ethylsuccinate and clindamycin by CE with electrochemiluminescence detection using azithromycin as internal standard and its applications

A sensitive approach for the simultaneous determination of tilmicosin, erythromycin ethylsuccinate and clindamycin was developed by CE coupled with electrochemiluminescence detection with ionic liquid. The parameters for CE, electrochemiluminescence detection and the effect of ionic liquid were investigated systematically. The three analytes were well separated and detected within 8 min. The limits of detection (S/N=3) of tilmicosin, erythromycin ethylsuccinate and clindamycin are 3.4×10^?9, 2.3×10^?8 and 1.3×10^?8 mol/L, respectively. The precisions (RSD%) of the peak area and the migration time are from 0.8 to 1.5% and from 0.2 to 0.5% within a day and from 1.8 to 2.7% and from 0.6 to 0.8% in 3 days, respectively. The limits of quantitation (S/N=10) of tilmicosin, erythromycin ethylsuccinate and clindamycin are 3.2×10^?8, 2.9×10^?7 and 9.1×10^?8 mol/L in human urines and 5.5×10^?8, 3.2×10^?7 and 2.1×10^?7 mol/L in milk samples, respectively. The recoveries of three analytes at different concentration levels in urine, milk and drugs are between 90.0 and 104.7%. The proposed method was successfully applied to the determination of three analytes in human urine, milk and drugs.     

A new electrochemiluminescent detection system equipped with an electrically heated carbon paste electrode for CE

An electrochemiluminescent (ECL) detection system in CE with an electrically heated carbon paste electrode (CPE) was developed. This CPE could be heated by a 100 kHz alternating current (ac) generated from a function generator, and the temperature of the electrode (Te) could be controlled. To evaluate the feasibility and reliability of this system, the electrochemically generated Ru(bpy)(3) (3+)-based ECL reaction was used for detection of triethylamine (TEA) and tri-n-propylamine (TPrA). Ru(bpy)(3) (2+) was added into the separation buffer solution with precolumn mode. Effects of several important factors were investigated to acquire the optimum conditions. Under the optimum conditions, the heated electrode has been shown to provide advantages by the measurement of ECL intensity in CE at elevated Te. Compared with the conventional electrode at the room temperature, using heated CPE could improve peak shape and gain good reproducibility with lower detection limits and wider linearity ranges. Compared with the room temperature, the linear ranges and detection limits (S/N = 3) for TEA and TPrA were improved about one magnitude when the Te was 39 degrees C. In contrast, the RSD was lower than for the electrode at room temperature.     

Determination of diastereoisomeric alkaloids in urine by capillary electrophoresis with electrochemiluminescence detection

A new and simple capillary electrophoresis with electrochemiluminescence detection was developed for the separation and the quantification of a pair of diastereoisomenc alkaloids（ephedrine and pseudoephedrine）.The limits of detection（S/N = 3） were 4.5×10^-8 mol/L for ephedrine and 5.2×10^-8 mol/L for pseudoephedrine,respectively.The RSDs of migration time and peak area were less than 1.3 and 2.5%（n = 5）,respectively.The applicability of the propose method was illustrated in the determination of ephedrine and pseudoephedrine in human urine,ephedrine in nasal drops,and the monitoring of pharmacokinetics for pseudoephedrine.     

Graphene oxide coated capillary for chiral separation by CE

This article describes a new application of graphene oxide (GO) in CE based on the coating of fused silica capillary for chiral separation. The coated capillary was characterized by SEM, energy dispersive X‐ray spectroscopy, and Raman spectra. The results indicated that the capillary was coated with GO. Chiral separations were carried out in the GO‐coated capillary for the ephedrine–pseudoephedrine (E‐PE) isomers and β‐methylphenethylamine (β‐Me‐PEA) isomers at the optimal buffer conditions without any chiral selector by CE. The precision and reproducibility of GO‐coated capillary were investigated, and the RSDs of migration time (n = 6) for the E‐PE isomers were 1.35–1.41%, and 0.97–3.50% for β‐Me‐PEA isomers, respectively. The LOD for E‐PE isomers and β‐Me‐PEA isomers was 3 μM and 18 μM, respectively.     

New technique for capillary electrophoresis directly coupled with end-column electrochemiluminescence detection

A new end-column electrochemiluminescence (ECL) detection technique coupling to capillary electrophoresis (CE) is characterized. A 300 microm diameter Pt working electrode was used to directly couple with a 75 microm inner diameter separation capillary without an electric field decoupler. The hydrodynamic cyclic voltammogram (CV) of Ru(bpy) 3 2+ showed that electrophoretic current did not affect the ECL reaction. The presence of high-voltage (HV) field only resulted in the shift of the ECL detection potential. The distance of capillary to electrode was an important parameter for optimizing detection performance as it determined the characteristics of mass transport toward the electrode and the actual concentration of Ru(bpy) 3 2+ in the detection region. The optimum distance of capillary to electrode was decided by the inner diameter of the capillary, too. For a 75 microm capillary, the working electrode should be placed away from the capillary outlet at a distance within the range of 220-260 microm. The effects of pH value of ECL solution and molecular structure of analytes on peak height and theoretical plate numbers were discussed. Using the 75 microm capillary, under the optimum conditions, the method provided a linear range for tripropylamine (TPA) between 1 x 10(-10) and 1 x 10(-5) mol/L with correlation coefficient of 0.998. The detection limit (signal-to-noise ratio S/N = 3) was 5.0 x 10(-11) mol/L. The relative standard deviation in peak height for eight consecutive injections was 5.6%. By this new technique lidocaine spiked in a urine sample was determined. The method exhibited the linear range for lidocaine from 5.0 x 10(-8) to 1.0 x 10(-5) mol/L with correlation efficient of 0.998. The limit of detection (S/N = 3) was 2.0 x 10(-8) mol/L.     

Capillary electrophoresis–electrochemiluminescence detection method for the analysis of ibandronate in drug formulations and human urine

A simple, rapid and sensitive CE method coupled with electrochemiluminescence (ECL) detection for direct analysis of ibandronate (IBAN) has been developed. Using a buffer solution of 20 mM sodium phosphate (pH 9.0) and a voltage of 13.5 kV, separation of IBAN in a 30‐cm length capillary was achieved in 3 min. ECL detection was performed with an indium tin oxide working electrode bias at 1.6 V (versus a Pt wire reference) in a 200‐mM sodium phosphate buffer (pH 8.0) containing 3.5 mM Ru(bpy)₃²⁺ (where bpy=2,2′‐bipyridyl). Derivatization of IBAN prior to CE‐ECL analysis was not needed. Linear correlation (r=0.9992, n=7) between ECL intensity and analyte concentration was obtained in the range of 0.25–50 μM IBAN. The LOD of IBAN in water was 0.08 μM. The developed method was applied to the analysis of IBAN in a drug formulation and human urine sample. SPE using magnetic Fe₃O₄@Al₂O₃ nanoparticles as the extraction phase was employed to pretreat the urine sample before CE‐ECL analysis. The linear range was 0.2–12.0 μM IBAN in human urine (r=0.9974, n=6). The LOD of IBAN in urine was 0.06 μM. Total analysis time including sample preparation was <1 h.     

Electrokinetic injection of DNA from gel micropads: basis for coupling polony technology with CE separation

We propose a novel method for electrokinetic injection of DNA samples into capillaries from nanoliter gel micropads, deposited on glass slides, which are coated with electroconducting film. Theoretical and experimental proof is presented for the proposed method. The method allows efficient and highly precise injection without physical contact between the gel pad and the capillary. Read length of more than 700 bp at Q20 has been reproducibly demonstrated in fused-silica capillaries using the proposed injection technique. Based on the obtained results we discuss a novel DNA sequencing system which combines DNA amplification and cycle sequencing in arrays of subnanoliter gel micropads and high-throughput electrophoretic separation in monolith multicapillary arrays.     

Determination of nicotine and its metabolite cotinine in urine and cigarette samples by capillary electrophoresis coupled with electrochemiluminescence

In this paper, CE coupled with electrochemiluminesence (ECL) detection using a 76‐μm Pt disk as working electrode was developed for nicotine (NIC) determination. The major metabolite of NIC is cotinine (COT), which has a similar tertiary amine structure to NIC. However, there is a carbonyl group attached in the structure of COT, which leads to the great decrease in ECL response. In order to improve the ECL response of COT, NaBH₄ was used for carbonyl reduction. After reduction, NIC and COT were separated and detected by CE‐ECL. ECL response plotted with NIC concentration was linear between 5.0×10^?7 and 5.0×10^?5 mol/L (81–8100 μg/L), with LOD of 5.0×10^?8 mol/L (8.1 μg/L). The developed CE‐ECL method was applied for NIC determination in urine and cigarette samples.     

Capillary electrophoresis coupled with electrochemiluminescence detection for the separation and determination of thyreostatic drugs in animal feed

A rapid, simple, and practical method for the determination of four of the most used thyreostatic drugs (methimazole, 2‐thiouracil, 6‐methyl‐2‐thiouracil, and 6‐propyl‐2‐thiouracil) using CE coupled to electrochemiluminescence detection has been established, based on the electrochemiluminescence enhancement of tris(2,2‐bipyridyl)ruthenium(II) with these analytes. Parameters that affect separation and detection were optimized. Under the optimum experimental conditions, the four analytes could be well separated within 11 min at the separation voltage of 16 kV in a running solution containing 20 mM phosphate buffer (pH 9.0) and 1.0 × 10^?4 M Ru(bpy)₃²⁺, with a solution of 20 mM phosphate buffer (pH 12.0) containing 1.0 × 10^?4 M Ru(bpy)₃²⁺ in the electrochemiluminescence detection cell. The detection limits for methimazole, 6‐methyl‐2‐thiouracil, 6‐propyl‐2‐thiouracil, and 2‐thiouracil were 0.1, 0.05, 0.05, and 0.01 μM, respectively. The proposed method was applied to analyze these drugs in spiked animal feed samples. The recoveries were 88.2～99.0 and 86.4～98.7% for the intraday and interday analyses, respectively. The RSDs were 2.7～4.8 and 1.8～5.0% for the intraday and interday analyses, respectively. The results demonstrate that the proposed method has promising applications in the detection of thyreostatic drugs in animal feeds.     

On-column detection of multiphoton-excited fluorescence in CE using hyphenated cylindrical-square capillaries

Multiphoton-excited fluorescence (MPEF) is a complementary and useful mode of LIF detection in CE with advantages of ultra-low mass detectability and spectral excitability, but it is currently quite limited by its end-column configuration. In this article, we demonstrate a novel strategy of on-column schemes that can greatly facilitate MPEF detection in CE. FITC-labeled amine species were used as the model samples for the evaluation and comparison of those detection scenarios. By using the square capillary instead of the conventional cylindrical one, the on-column MPEF could be readily achieved, with detection sensitivity of 0.72 microM that was comparable with the end-column mode. However, this strategy unfavorably reduced separation efficiency. The theoretical plate number on averaging all the sample peaks was significantly decreased from 283,000 to 19,000/m. To minimize such an influence, a short square capillary acting as an on-column MPEF detection cell was then mounted to a long cylindrical capillary responsible for the CE separation. Results indicated that both high separation efficiency (240,000/m) and better detectability (0.42 microM) were realized simultaneously by using this binary-capillary configuration. Quantitative analysis was performed under the optimized detector configuration and revealed a linear dynamic range of 2 orders of magnitude, with mass detection limit down to the mid-yottomole level.     

Simultaneous analysis of six cardiovascular drugs by capillary electrophoresis coupled with electrochemical and electrochemiluminescence detection,using a chemometrical optimization approach

CE coupled with dual electrochemical (EC) and electrochemiluminescence (ECL) detection was optimized for simultaneous analysis of six cardiovascular drugs (alprenolol, propafenone, acebutolol, verapamil, atenolol and metoprolol) via central composite design. Following this study, three critical electrophoretic factors governing the CE separation were investigated: Tris‐H₃PO₄ buffer concentration, buffer pH value and separation voltage. A modified chromatographic response was adopted for evaluating CE separation quality. Optimum conditions were achieved using Tris‐H₃PO₄ buffer 35.6 mM (pH 2.3) separated at 13.9 kV, which was employed experimentally and led to the successful simultaneous separation of the above six drugs. The good agreement of the chromatographic response was observed between predicted data and actual experimental results using these optimized conditions (RSD=3.75%). The proposed method was validated for linearity, repeatability and sensitivity, and subsequently successfully applied to determine six basic drugs in urine samples.     

Determination of mefenacet by capillary electrophoresis with electrochemiluminescence detection

Electrochemiluminescence (ECL) detection with capillary electrophoresis (CE) separation system was used to the rapid analysis of mefenacet within 7 min. The linear response range of mefenacet was from 1.07 × 10⁻⁸ to 5.0 × 10⁻⁷ M with a detection limit of 4.0 × 10⁻⁹ M. This technique was also applied to analyze residues of mefenacet in seedling and soil.     

Simultaneous determination of methylephedrine and pseudoephedrine in human urine by CE with electrochemiluminescence detection and its application to pharmacokeinetics

A novel method for the determination of ephedra alkaloids (methylephedrine and pseudoephedrine) was developed by electrophoresis capillary (CE) separation and electrochemiluminesence detection (ECL). The use of ionic liquid (1‐butyl‐3‐methylimidazolium tetrafluoroborate, BMIMBF₄) improved the detection sensitivity markedly. The conditions for CE separation, ECL detection and effect of ionic liquid were investigated in detail. The two ephedra alkaloids with very similar structures were well separated and detected under the optimum conditions. The limits of detection (signal‐to‐noise ratio = 3) in standard solution were 1.8 × 10^–8 mol/L for methylephedrine (ME) and 9.2 × 10^–9 mol/L for pseudoephedrine (PSE). The limits of quantitation (signal‐to‐noise ratio = 10) in human urine samples were 2.6 × 10^?7 mol/L for ME and 3.6 × 10^–7 mol/L for PSE. The recoveries of two alkaloids at three different concentration levels in human urine samples were between 81.7 and 105.0%. The proposed method was successfully applied to the determination of ME and PSE in human urine and the monitoring of pharmacokinetics for PSE. The proposed method has potential in therapeutic drug monitoring and clinical analysis. Copyright © 2009 John Wiley & Sons, Ltd.     

Determination of dioxopromethazine hydrochloride by capillary electrophoresis with electrochemiluminescence detection

The paper presents a rapid method for the determination of dioxopromethazine hydrochloride (DPZ), an antihistamine drug, by the capillary electrophoresis with electrochemiluminescene detection (CE–ECL) using tris(2,2′-bipyridyl)ruthenium(II) (Ru(bpy)₃²⁺) reagent. This CE–ECL detection method has high sensitivity, good selectivity and reproducibility for DPZ analysis. Under the optimized conditions: separation capillary, 38 cm length (25 μm i.d.); sample injection, 10 s at 8 kV; separation voltage, 12.5 kV; running buffer, 20 mmol L⁻¹ sodium phosphate of pH 6.0; detection potential, 1.15 V; 50 mmol L⁻¹ of phosphate buffer (pH 7.14) containing 5 mmol L⁻¹ of Ru(bpy)₃²⁺ in ECL detection cell, the detection limit of DPZ was 0.05 μmol L⁻¹ (S/N = 3). The linear range extended from 5 to 100 μmol L⁻¹. The linear curve obtained was Y = 181.62 + 9.28X with a correlation coefficient of 0.9970. The relative standard deviations of the ECL intensity and the migration time for six continuous injections of 5 μmol L⁻¹ DPZ were 3.7% and 0.92%, respectively. The CE–ECL method was applied to analyze DPZ in real samples including tablets, rat serum and human urine, and satisfactory results were obtained without interference from samples matrix. The CE–ECL technique was proved to be a potential method for the detection of DPZ in clinic analysis.     

Determination of sinomenine in Sinomenium acutum by capillary electrophoresis with electrochemiluminescence detection

A Ru(bpy)₃²⁺-based electrochemiluminescence (ECL) detection coupled with capillary electrophoresis (CE) has been established for the determination of sinomenine for the first time. Optimum separation was achieved with a fused-silica capillary column (50 cm × 25 μm i.d.) and a background electrolyte of 50 mM sodium phosphate (pH 5.0) at a separation voltage of 15 kV. The content of sinomenine was detected by ECL at the detection voltage of 1.15 V (versus Ag/AgCl) with 5 mM Ru(bpy)₃²⁺ in 75 mM phosphate solution (pH 8.0) when a chemically modified platinum electrode by europium(III)-doped prussian blue analogue (Eu-PB) was used as a working electrode. Under the optimized conditions, the ECL intensity was in proportion to sinomenine concentration in the range from 0.01 to 1.0 μg mL⁻¹ with a detection limit of 2.0 ng mL⁻¹ (3σ). The relative standard derivations of migration time and ECL intensity were 0.93 and 1.11%, respectively. The level of sinomenine in Sinomenium acutum Rehd. et Wils was easily determined with recoveries between 98.6 and 102.7%.     

Ultrasensitive aptamer-based bio bar code immunomagnetic separation and electrochemiluminescence method for the detection of protein

An ultrasensitive aptamer-based bio bar code immunomagnetic separation and electrochemiluminescence (IM-ECL) method for the detection of protein is developed. The target protein is captured by biotin-labeled aptamer (biotin probe) and [Ru(bpy)₃]²⁺ (TBR)-Au bio bar code-labeled aptamer (ECL nanoprobe), to form a double aptamer–protein sandwich complex. The complex is then immobilized on the streptavidin microbeads through biotin–streptavidin linkage and detected by ECL assay. The ECL signal of the target protein is amplified by the TBR-bio bar code DNAs. As an example, platelet-derived growth factor B-chain homodimer (PDGF-BB) was detected by the method. Experimental results show that the detection limit of the assay is 1 pM of PDGF-BB. A calibration curve with a linearity range from 1 pM to 10 nM is established, thus, make quantitative analysis possible. The method has been used to detect PDGF-BB in fetal calf serum with minimum background interference. Due to the wide availability of aptamer for numerous proteins, this aptamer-based bio bar code IM-ECL method holds great promise in protein detection.