Voltammetric studies on the interaction of amikacin with methyl blue and its analytical application

A new method to determine the concentration of amikacin(AMK)using methyl blue(MB)as electrochemical probe was developed in this paper.In pH 4.5 Britton-Robinson(B-R)buffer solution,the MB reacted with AMK to form ion association complexes,which led to the reductive peak current of MB at-0.275 V(versus SCE)to decrease,and the decreases were linear with the concentration of AMK in the range of 1.0-60.0 mg/L,the regression of equation isΔIp(nA)=-8.48 102.36c(mg/L), correlation coefficientγis 0.997.The conditions for determining the concentration of AMK using linear sweep voltammetry(SLV) were optimized.The method was used to determine the content of amikacin commercially available with satisfactory results.     

Experiment of subcritical water (Fenton) oxidation treatment of methyl vanillin wastewater

In this paper the oxidative degradation process of methyl vanillin wastewater was studied by the subcritical water oxidation (HCWO) technology. A subcritical Fenton oxidation (HCFO) system formed while Fe²⁺ was added as a catalyst. The oxidation degradation kinetics of methyl vanillin wastewater was also studied. The results showed that the suitable process conditions for degradation of methyl vanillin wastewater by HCWO were as follows: temperature of 340 ​°C, pressure of 24 ​MPa, oxidant multiple of 1.5, residence time of 217.3 ​s (flow rate of 2.0 ​mL ​min^-1). For methyl vanillin wastewater, the HCFO system has no obvious advantages compared to the HCWO system. The activation energy (Ea) of HCWO oxidized methyl vanillin wastewater reaction was 32.6 ​kJ ​mol^-1, and the pre-exponential factor A was 5.64 s^-1.     

Counterion-dye staining for DNA in electrophoresed gels using indoine blue and methyl orange

In this study, we describe a sensitive staining method for DNA in agarose and polyacrylamide gels using organic visible dyes, indoine blue (IB) and methyl orange (MO). The counterion-dye staining method uses two oppositely charged dyes to form a hydrophobic ion pair complex in the staining solution. A decrease in the number of free forms of dyes in staining solution can enhance the selectivity of binding between the dye and DNA, and can reduce nonspecific background staining. As a result, the sensitivity of counterion-dye staining was significantly improved compared with other dye-based staining. This method uses a staining solution consisting of 0.008% IB, 0.002% MO, 10% ethanol and 0.2 M sodium acetate at pH 4.7, and can detect 5 ng of lambda DNA/HindIII within 60 min in agarose gels and 10 ng of PhiX174 DNA/HaeIII within 20 min in polyacrylamide gels.     

Synthesis of NiO coated chitosan-cenosphere buoyant composite for enhanced adsorptive removal of methylene blue

The objective of the present study is to utilize fly ash cenosphere to remove methylene blue (MB) from the water streams. Nickel oxide is a typical semiconductor used as proficient adsorbent material for degradation of dye with environment friendly applications due to its excellent chemical stability and high catalytic activity. The chitosan cenosphere buoyant composite coated with NiO was synthesized with hydrothermal grafting reaction using silane coupling agent and epichlorohydrin as a cross-linking reagent. The batch adsorption experiments were carried out with a cationic dye, methylene blue as a representative organic pollutant to investigate the adsorptive capabilities of the composite as adsorbent. The influence of pH (2-12), initial concentration of dye (50–200 mg/L), temperature (37–47 °C) and contact time (0–24 h) were taken as parameters in the study. On the relative elimination of MB, the effect of time and temperature were investigated. The adsorption kinetics for MB was correlated and found to observe the pseudo-second order kinetic model, whereas the equilibrium adsorption isotherm follows the Langmuir model (R² > 0.99). The results indicate that the floating fly ash cenosphere coated with NiO proved to be more responsive for enhanced degradation of methylene blue.     

Efficient Fe(III)/Fe(II) cycling triggered by MoO2 in Fenton reaction for the degradation of dye molecules and the reduction of Cr(VI)

There is a relatively low efficiency of Fe(III)/Fe(II) conversion cycle and H₂O₂ decomposition (<30%) in conventional Fenton process, which further results in a low production efficiency of OH and seriously restricts the application of Fenton. Herein, we report that the commercial MoO₂ can be used as the cocatalyst in Fenton process to dramatically accelerate the oxidation of Lissamine rhodamine B (L-RhB), where the efficiency of Fe(III)/Fe(II) cycling is greatly enhanced in the Fenton reaction meanwhile. And the L-RhB solution could be degraded nearly 100% in 1 min in the MoO₂ cocatalytic Fenton system under the optimal reaction condition, which is apparently better than that of the conventional Fenton system (～50%). Different from the conventional Fenton reaction where the OH plays an important role in the oxidation process, it shows that ¹O₂ contributes most in the MoO₂ cocatalytic Fenton reaction. However, it is found that the exposed Mo⁴⁺ active sites on the surface of MoO₂ powders can greatly promote the rate-limiting step of Fe³⁺/Fe²⁺ cycle conversion, thus minimizing the dosage of H₂O₂ (0.400 mmol/L) and Fe²⁺ (0.105 mmol/L). Interestingly, the MoO₂ cocatalytic Fenton system also exhibits a good ability for reducing Cr(VI) ions, where the reduction ability for Cr(VI) reaches almost 100% within 2 h. In short, this work shows a new discovery for MoO₂ cocatalytic advanced oxidation processes (AOPs), which devotes a lot to the practical water remediation application.     

Green synthesis of hematite/TUD-1 nanocomposite as efficient photocatalyst for bromophenol blue and methyl violet degradation

Hematite immobilized on TUD-1 nanocomposite was prepared via sol-gel composite formation of biosynthesized hematite nanoparticles with TUD-1 precursor. The nanocomposite was characterized by various techniques such as X-ray diffraction, scanning electron microscopes/energy-dispersive X-ray spectroscopy, transmission electron microscope, gas sorption analysis, and UV–Visible diffuse reflectance spectrophotometer. Photocatalytic activity of the nanocomposite was examined in bromophenol blue and methyl violet degradation. The results showed that hematite nanoparticles obtained by the biosynthesis has particle size ranging at 20–100 nm. The nanocomposite of hematite/TUD-1 exhibit the homogeneous dispersion of the hematite in the mesoporous structured TUD-1. The smaller dispersed hematite nanoparticles affects to the increasing band gap energy of hematite, and is responsible for the efficient photocatalytic degradation of bromophenol blue and methyl violet. It is found that degradation efficiencies of the reactions over hematite/TUD-1 nanocomposite are 94.6% for bromophenol blue, and 96.7% for methyl violet. The degradation efficiency and kinetics constant of the degradation reaction expressed the effectiveness of the nanocomposite since the values are comparable with the hematite nanoparticles and other reported photocatalysts.     

Ultrasonic assisted synthesis of ZnO nanoflakes and photocatalytic activity evaluation for the degradation of methyl orange

In the present investigation, ZnO nanoflakes was prepared via sonochemical synthesis route. Effect of ultrasonic treatment time was studied based on structural, morphological and optical properties. X-ray diffraction (XRD) reveals the formation of wurtzite hexagonal crystalline structure of ZnO nanoflakes. Ultrasonic treatments affected the crystallite size and the density of dislocation, which is due to increased nucleation and growth rates of nanoflakes. The samples synthesized at 40–50 min ultrasonic treatment showed a strong absorption band at 605 and 650 (cm^?1) versus other treatments, which is an indication of 2D nanostructure (nanoflakes). FE-SEM analysis further confirms the formation of 2D nanostructures of the ZnO. The composition and purity was confirmed by the energy dispersive X-ray (EDX) analysis, which displays the occurrence of Zn and O elements in the sample. Photocatalytic activity (PCA) of ZnO nanoflakes was studied for methyl orange (MO) dye degradation under UV light exposure and up to 93.13 % dye degradation is achieved within 90 min. Effect of various parameters (dye concentration, mass of photocatalytic material) and kinetic study was also performed. Results revealed that the ultrasonic treatment affected the optical and photocatalytic properties of the of ZnO nanoflakes, which could be employed for the remediation of dyes in textile effluents.     

聚甲基蓝修饰电极的制备及对多巴胺的测定

研究了聚甲基蓝修饰电极的制备及其多巴胺在聚甲基蓝修饰电极上的循环伏安特性,建立了循环伏安法测定多巴胺的新方法。在pH7.0磷酸盐缓冲溶液中,峰电流与多巴胺浓度在8.0×10-7～5.0×10-4mol L范围内呈良好的线性关系,检出限为5.0×10-8mol L。已用于药剂中多巴胺的测定。     

Unprecedented stable aqueous semiquinone methide radical formation interferes with adsorptive cathodic stripping voltammetry of cobalt methyl thymol blue

A putatively highly sensitive and selective method for the determination of cobalt in aqueous samples by catalytic adsorptive cathodic stripping voltammetry using methyl thymol blue (MTB) as the ligand has been documented [A. Safavi, E. Shams, Talanta 51 (2000) 1117] and its underlying mechanism has been briefly explored [A. Safavi, E. Shams, Electroanalysis 14 (2002) 708]. In an attempt to adapt the method for application in metalloprotein analysis we obtained erratic results, which were traced down to the redox non-innocence of the free ligand in the potential range prescribed for the metal analysis. On the hanging mercury drop electrode free methyl thymol blue is reversibly one-electron reduced to the semiquinone form with E_m,7.0 = −482 mV versus NHE at 22 °C, and the radical is subsequently quasi-reversibly one-electron reduced to the quinol form with E_m,7 ≈ −0.9 V. This observation invalidates the use of MTB in electrochemical analysis of metal ions. This is also the first observation ever of a stable quinone methide radical in aqueous solution.     

Hydrophilic Fe3O4 nanoparticles prepared by ferrocene as high‐efficiency heterogeneous Fenton catalyst for the degradation of methyl orange

Hydrophilic Fe₃O₄ nanoparticles were prepared with ferrocene as an iron source via the thermal decomposition method and their catalytic response towards methyl orange was investigated. The effects of the pH, temperature, H₂O₂ dosage, catalyst dosage and initial dye concentration on the degradation of methyl orange were researched in detail. Furthermore, the stability of the catalyst was evaluated by measuring the degradation rate in eight successive cycles. The study demonstrates that methyl orange can be completely degraded i.e., a 99% degratation rate was obtained within 3 min. This excellent catalytic activity is attributed to the small size and good dispersibility of the nanoparticles, which stimulate the rapid and massive generation of reactive oxygen species in the heterogeneous Fenton reaction. In addition, the magnetic separation of the catalyst offers great prospects for fast and economical decontamination of dye polluted water.     

Novel visible-light-driven photocatalyst of NiO/Cd/g-C3N4 for enhanced degradation of methylene blue

Novel NiO/Cd/g-C₃N₄ photocatalysts were synthesized using a green and straightforward microwave-assisted method and characterized by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), the Brunauer–Emmett–Teller (BET) method, transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and ultraviolet–visible spectroscopy (UV–Vis). The ternary NiO/Cd/g-C₃N₄ nanocomposites were evaluated for the degradation of methylene blue (MB) at room temperature under the visible light irradiation. Experimental results revealed that the weight percent of cadmium had a remarkable effect on the photodegradation efficiency. The NiO/Cd/g-C₃N₄ (0.1%) sample exhibited superior activity in the degradation reaction. The activity of this nanocomposite was about 4.5 and 3.25 fold higher than those of the pure g-C₃N₄ and NiO/g-C₃N₄ samples in the degradation of MB, respectively. The enhanced photocatalytic activity was attributed to the low energy gap, increased absorption capacity of the visible light, and efficient suppression of the recombination of photogenerated electron-hole pairs. A detailed photocatalytic mechanism over the nanocomposite of NiO/Cd/g-C₃N₄ (0.1%) was proposed with superoxide radical anion O₂^– as the main reactive species. The stability of the nanocomposite was confirmed after four consecutive runs as well.     

甲基蓝与血红蛋白相互作用的共振瑞利散射光谱研究及小分子的影响

在弱酸性条件下,甲基蓝(MB)可以通过静电和疏水作用聚集到血红蛋白(Hb)上并形成离子缔合物,不仅使得吸收光谱发生变化,而且使得共振瑞利散射增强。据此发展了一种测定Hb的RRS便捷方法,其线性范围和检出限分别为0.2~20μg/mL和0.012μg/mL。与RRS法相比,分光光度法的线性范围和检出限分别为8~60μg/mL和0.688μg/mL(344 nm),5~60μg/mL和0.398μg/mL(408 nm)。此RRS法可用于尿样中Hb的痕量检测。实验考察了体系的吸收、散射光谱性质和最佳聚合条件,并在最佳条件下研究了分析参数及作用机理。并初步讨论了有机小分子对体系的影响,结果表明分子间氢键是主要作用力不容忽视。     

Efficient Fe(III)/Fe(II) cycling triggered by MoO2 in Fenton reaction for the degradation of dye molecules and the reduction of Cr(VI)

In this work, we develop an inorganic cocatalyst of commercial MoO₂ application in Fenton reaction, which can significantly enhance the Fe(III)/Fe(II) cycling efficiency to improve the oxidation activity for the remediation of Lissamine rhodamine B (L-RhB).     

Aversatile β-cyclodextrin functionalized silver nanoparticle monolayer for capture of methyl orange from complex wastewater

The toxic organic dye contaminants in wastewater are extremely harmful to the ecosystem.Surface enhanced Raman scattering(SERS) is a technique with high sensitivity and chemical specificity which fulfills the requirements for monitoring dye contaminants in wastewater.However,as one of the common dye contaminants,methyl orange(MO) has very weak affinity to metallic surfaces and is difficult to be detected by SERS at low concentrations.Therefore,a new type of SERS substrate with Ag nanoparticle monolayer functionalized by mono-6-deoxy-6-thio-β-cyclodextrin(β-CD-SH) was prepared to efficiently capture and detect MO in wastewater with a limit of detection of 5×10^-7 mol/L.The hydrophobic cavity of β-CD is responsible for the efficient trap and enrichment of MO on the Ag NPs surface,achieving a strong SERS signal of MO at low concentrations and at different pH values.This study provides new insight into designing a well-performed adsorbent for the capture and detection of organic contaminants.     

Ferrocene compounds XXIII. Synthesis and reactions of the new type of methyl ferrocyloxyalkanoates

The new types of ferrocenyloxaaliphatic acid ester, FcCHROCHR′COOMe (R = H, Me, Ph; R′ = H, Me) (7) have been prepared by the action of alkoxides derived from methyl glycolate or methyl lactate on the corresponding ferrocenylcarbinyl acetates (2) or N,N,N-trimethylferrocylammonium iodides (4). The esters obtained were accompanied by a small quantity of oligomeric esters, FcCHR(OCHR′CO)_n OMe (9), and with more or less ferrocyl methyl ethers (8). As opposed to the alkaline hydrolysis of the analogous methyl benzoxyacetate (6) into benzoxyacetic acid (5) the acidification of sodium alkanoates 10 obtained by saponification of esters 7 gave unexpectedly the corresponding ferrocenylcarbinols 1. In a similar way the esters 7 were converted into mixtures of the mentioned carbinols and diferrocyl ethers 11 under action of aqueous hydrochloric acid. The mechanisms of the reactions 10 → 1 and 7 → 1, 11 are discussed.     

Magnetic properties of a molecule in non-uniform magnetic field

Summary The potentials of the electromagnetic field in the Bloch gauge are used to obtain definitions for the multipole moment operators and for the operators expressing the electric and magnetic field of electrons acting on the nuclei of a molecule. Perturbation theory is employed to determine induced electronic moments and total electromagnetic field at the nuclei. A series of response tensors is defined to describe the contributions arising in non-uniform magnetic field and their origin dependence is studied.This paper is dedicated to Professor Werner Kutzelnigg on the occasion of his 60th birthday     

Comparative study for the removal of methylene blue via adsorption and photocatalytic degradation

Physically and chemically activated carbons were prepared from date pits and olive stones. Titania and WO(x)-TiO(2)/MCM-41 were prepared as photoactive catalysts. Surface characterizations were investigated from ash content, pH, base neutralization capacities and FT-IR techniques. The textural characteristics, namely specific surface area (S(BET)) and pore texture, were determined from low temperature adsorption of N(2) at 77 K. The decolorization of aqueous solution of methylene blue was performed by means of two alternative methods. Steam-activated carbons own higher surface area compared with ZnCl(2)-activated carbons, and the micropore surface area represents the major contribution of the total area. Steam-activated carbons were the most efficient decolorizing adsorbents owing to its higher surface area, total pore volume and the basic nature of the surface. The calculated values of DeltaG(0), DeltaH(0) and DeltaS(0) indicate the spontaneous behavior of adsorption. The photocatalytic degradation is more convenient method in decolorizing of methylene blue compared with the adsorption process onto activated carbons.     

Preparation for Magnetic Nanoparticles Fe3O4 and Fe3O4@SiO2 and Heterogeneous Fenton Catalytic Degradation of Methylene Blue

Dyestuff textile wastewater treatment has become a research hotspot due to its high chroma, poor biodegradability, and low toxicity characteristics. In this paper, we have synthesized magnetic Fe₃O₄ and core‐shell Fe₃O₄@SiO₂ materials by hydrothermal methods. These materials were characterized by XRD, TEM, N₂ adsorption‐desorption and so on. These materials’ heterogeneous Fenton has been applied to dye wastewater treatment. Methylene blue was used as a typical target of dye wastewater. Decolorization ratios of methylene blue were determined by different nanostructure composites catalysts. A serious of results of study showed that decolorization ratios of magnetic nanoparticles and core‐shell composites arrived at above 90 % under the weakly acidic or neutral conditions and room temperature. When these catalysts were reused, the results show that Fe₃O₄@SiO₂ materials were possessed with good cycle performance.