Benzothiadiazoyl-triazoyl cyclodextrin: a selective fluoroionophore for Ni(II)

A new multichromophoric cyclodextrin substituted with benzothiadiazoyl-triazole moiety has been synthesized by a one-pot click reaction between azido-cyclodextrin and TMS-ethynyl benzothiadiazole in the presence of TBAF. This fluorescent chemosensor exhibits a high selectivity to Ni²⁺ among a series of cations in CH₃CN solution. The association constant for the 1:1 complex was determined to be 2.88×10⁷ M⁻¹.     

2, 2′-Dihydroxyazobenzene-based fluorescent system for the colorimetric ‘turn-on’ sensing of cyanide

2, 2′-Dihydroxyazobenzene (DHAB) demonstrated high sensitivity and low selectivity toward three anions: CN⁻, CO₃²⁻, and HCO₃⁻. In the presence of Cu(II), complex DHAB-Cu(II) could give rise to enhanced fluorescence intensity by about 45-fold at 590 nm and visible red-to-reddish orange color change upon the addition of cyanide by utilizing an indirect method, while no changes were observed in the presence of other anions, including F⁻, Cl⁻, Br⁻, I⁻, H₂PO₄⁻, CH₃COO⁻, NO₃⁻, CO₃²⁻ and HCO₃⁻, and SO₄²⁻, making the DHAB-Cu(II) complex a selective and sensitive cyanide chemosensor.     

A colormetric and fluorescent chemosensor for adenosine-5′-triphosphate based on rhodamine derivative

A rhodamine spirolactam derivative (1) was developed as a colormetric and fluorescent chemosensor for adenosine-5′-triphosphate (ATP) via hydrogen bonds interaction. As far as we know, this is the first case to explore ATP-induced ring-opening of spirolactam in rhodamine derivatives. It exhibited a highly sensitive “turn-on” fluorescent response toward ATP with a 47-fold fluorescence intensity enhancement under 20 equiv. of ATP added. The chemosensor can be applied to the quantification of ATP with a linear range covering from 1.0 × 10⁻⁷ to 2.0 × 10⁻⁴ M and a detection limit of 2.5 × 10⁻⁸ M. The experiment results show that the response behavior of 1 toward ATP is pH independent in medium condition (pH 6.0–8.0). Most importantly, the novel chemosensor has well solved the problem of serious interferences from other nucleoside polyphosphates such as ADP and AMP generally met by previously reported typical fluorescent chemosensors for ATP. Moreover, the response of the chemosensor toward ATP is fast (response time less than 3 min). In addition, the chemosensor can be used for the fluorescence assay for protein kinase activity with satisfactory results. The chemosensor for ATP based on hydrogen bonds interaction provided a novel strategy for the design of colormetric and ratiometric fluorescent probes for other target anions with high sensitivity and selectivity.     

Simple indole-based colorimetric sensors with electron-withdrawing chromophores: Tuning selectivity in anion sensing

Three simple colorimetric anion sensors (1, 2, and 3) containing anthrone, 1,3-indanedione, and malononitrile as signaling chromophores and an indole binding site have been designed and synthesized. The introduction of electron-withdrawing groups can not only provide chromogenic signal output, but also tune the sensitivity and selectivity of indole-based anion sensors by electron push–pull features. Their anion binding and sensing properties were investigated in detail by dramatic color changes, UV–vis absorption, and ¹H NMR. As results revealed, sensor 1 showed high selectivity for F⁻ over AcO⁻ and H₂PO₄⁻ with a distinct change in color due to the deprotonation of indole NH group. The excellent selectivity of 1 for F⁻ can be attributed to the fitness in the acidity of its NH-group, which is tuned to be able to distinguish the subtle difference in the affinity of F⁻, AcO⁻, and H₂PO₄⁻ to NH proton.     

Ultra-sensitive determination of cyanide in surface water by gas chromatography–tandem mass spectrometry after derivatization with 2-(dimethylamino)ethanethiol

A gas chromatography–tandem mass spectrometric (GC–MS/MS) method has been established for the determination of cyanide in surface water. This method is based on the derivatization of cyanide with 2-(dimethylamino)ethanethiol in surface water. The following optimum reaction conditions were established: reagent dosage, 0.7 g L⁻¹ of 2-(dimethylamino)ethanethiol; pH 6; reaction carried out for 20 min at 60 °C. The organic derivative was extracted with 3 mL of ethyl acetate, and then measured by using GC–MS/MS. Under the established conditions, the detection and quantification limits were 0.02 μg L⁻¹ and 0.07 μg L⁻¹ in 10-mL of surface water, respectively. The calibration curve had a linear relationship relationship with y = 0.7140x + 0.1997 and r² = 0.9963 (for a working range of 0.07–10 μg L⁻¹) and the accuracy was in a range of 98–102%; the precision of the assay was less than 7% in surface water. The common ions Cl⁻, F⁻, Br⁻, NO₃⁻, SO₄²⁻, PO₄³⁻, K⁺, Na⁺, NH₄⁺, Ca²⁺, Mg²⁺, Ba²⁺, Mn⁴⁺, Mn²⁺, Fe³⁺, Fe²⁺ and sea water did not interfere in cyanide detection, even when present in 1000-fold excess over the species. Cyanide was detected in a concentration range of 0.07–0.11 μg L⁻¹ in 6 of 10 surface water samples.     

Synthesis of highly soluble fluorescent π-extended 2-(2-thienyl)benzothiazole derivatives via oxidative cyclization of 2-thienylthioanilide as the key step

In this Letter, we synthesize highly soluble push–pull type fluorescent 2-(2-thienyl)benzothiazole dyes and evaluate their photophysical properties. The key step is the synthesis of 2-(5′-bromothien-2′-yl)-6-alkoxybenzothiazole (2) via oxidative cyclization of 2-thienylthioanilide using PhI(OAc)₂ as the oxidant. The target dyes could be easily synthesized by the Suzuki–Miyaura cross-coupling reaction of 2 and an appropriate π-donor. The photophysical properties of the 2-thienylbenzothiazole chromophore were controlled by the π-donor moiety. It was found that 2 exhibited large Stokes shifts (5345 cm⁻¹) and a high quantum efficiency for fluorescence (Φ_F = 0.94 in CH₂Cl₂). Therefore, it can be expected to be a useful photofunctional material in liquid crystal laser dyes and nonlinear optical materials.     

Color response of tri-armed azo host colorimetric sensors and test kit for fluoride

Five new chromogenic tripodal receptors (2a-e) containing electron withdrawing and donating groups appended to the azophenol moiety were synthesized, characterized, and their chromogenic behaviors toward various anions were investigated. These tripodal receptors showed a distinct color change only when treated with fluoride ions in CH₃CN solution. Yet, other anions such as Cl⁻, Br⁻, I⁻, NO₃⁻, ClO₄⁻, AcO⁻, HSO₄⁻, and H₂PO₄⁻ could not cause any color change. Thus, the receptors 2a-e can be used as a colorimetric chemosensor for the determination of fluoride ion. In addition, ¹H NMR experiments were carried out to explore the nature of interaction between tripodal receptors and fluoride. Finally, analytical application and the use of test strip of the receptor 2b to detect fluoride was also reported.     

Thiourea linked peracetylated glucopyranosyl–anthraquinone conjugate as reversible ON–OFF receptor for fluoride in acetonitrile

A new thiourea linked peracetylated glucopyranosyl–anthraquinone conjugate (L) has been synthesized and characterized. The binding properties of L have been studied with nineteen different anions. The L exhibited selective chromogenic as well as fluorescent chemosensor property toward F⁻ by a ∼13-fold increase in the emission intensity upon binding with F⁻. The minimal detection limit for F⁻ is 185 ± 5 ppb in acetonitrile. Interaction of F⁻ led to a bathochromic shift of 80 nm in the absorption band. An INHIBIT logic gate has been proposed using the output obtained from the fluorescence studies. The structure of the species formed upon the interaction of F⁻ with L has been established by DFT computations.     

The reactions of cyclotriphosphazene with 2-(2-hydroxyethylamino)ethanol. Spectroscopic studies of the derived products

Abstract

The reactions of cyclotriphosphazene (1) with 2-(2-hydroxyethylamino)-ethanol (2) were investigated. 2-(2-hydroxyethylamino)-ethanol (2) is a tri-functional reagent consisting of both aliphatic hydroxyl and the secondary amino groups and its nucleophilic substitution reactions with cylotriphosphazene can lead to different product types; open chain, spiro, ansa, bridged and their mixtures. The reactions with one, two and three equimolar ratios of 2-(2-hydroxyethylamino)-ethanol, in the presence of NaH at 0–10?°C and at room temperature gave the following cyclotriphosphazene derivatives: one mono-spiro, N₃P₃Cl₄[O–(CH₂)₂–NH–(CH₂)₂–O] (3, 1:1, r.t.); its isomer mono-ansa (5, 1:1, r.t.); one dispiro, N₃P₃Cl₂[O–(CH₂)₂–NH–(CH₂)₂–O]₂ (4, 1:1, r.t.); its isomer spiro-ansa (6, 1:2, r.t.); and one single-bridged compound with spiro substituted units, N₃P₃Cl₃[O–(CH₂)₂–NH–(CH₂)₂–O]₃N₃P₃Cl₃ (7, 1:3, at 0–10?°C); as well as single-, N₃P₃Cl₅[O–(CH₂)₂–NH–(CH₂)₂–O]N₃P₃Cl₅ (8, 1:2, r.t.), double-, N₃P₃Cl₄[O–(CH₂)₂–NH–(CH₂)₂–O]₂N₃P₃Cl₄ (9, 1:2, r.t.), and tri-bridged, N₃P₃Cl₃[O–(CH₂)₂–NH–(CH₂)₂–O]₃N₃P₃Cl₃ (10, 1:3, at 0–10?°C) derivatives. Triple-bridged derivative is the major product in this system. The structures of the novel-derived compounds were characterized by TLC-MS, FT-IR, elemental analysis, ¹H, and ³¹P NMR spectral.     

Novel highly selective anion chemosensors based on 2,5-bis(2-hydroxyphenyl)-1,3,4-oxadiazole

2-(2-Hydroxyphenyl)-5-phenyl-1,3,4-oxadiazole 1 and 2,5-bis(2-hydroxyphenyl)-1,3,4-oxadiazole 2 were used as anion fluorescent and colorimetric chemosensors with high selectivity for H₂PO₄⁻ and F⁻ over Cl⁻, while 2 can even distinguish H₂PO₄⁻ from F⁻.     

The supramolecular chemistry of metal complexes with heavily substituted imidazoles as ligands: Cobalt(II) and zinc(II) complexes of 1-methyl-4,5-diphenylimidazole

An investigation of the M^II/X⁻/L [M^II = Co, Ni, Cu, Zn; X⁻ = Cl⁻, Br⁻, I⁻, NCS⁻, NO₃⁻, N₃⁻, CH₃COO⁻; L = 1-methyl-4,5-diphenylimidazole] general reaction system towards the detailed study of the intermolecular interactions utilized for controlling the supramolecular organization and the structural consequences on the structures produced has been initiated. Three representative complexes with the formulae [Co(NO₃)₂(L)₂] (1), [Zn(NO₃)₂(L)₂] (2) and [Co(NCS)₂(L)₂]·EtOH (3·EtOH) have been synthesized and characterized by spectroscopic methods and single-crystal X-ray analysis. Compounds 1 and 2 are isomorphous (tetragonal, I4₁cd) with their metal ions in a severely distorted octahedral Co/ZnN₂O₄ environment, while 3·EtOH crystallizes in P2₁/c with a tetrahedral CoN₄ coordination. The structural analysis of 1, 2 and 3·EtOH reveals a common mode of packing among neighbouring ligands (expressed through intramolecular π–π interactions between the 4,5-diphenylimidazole moieties), enhancing thus the rigidity and stability of the complexes. The bent coordination of the two isothiocyanates in 3 [Co–NCS angles of 173.8(2) and 160.8(2)°] seems to be caused by intermolecular hydrogen bonding and crystal packing effects.     

Bis(triphenylphosphine)4-fluorobenzaldehyde thiosemicarbazone copper(I): Forcing chelation through oxoanions

This paper reports the synthesis and characterization of six compounds of copper(I), stabilized in its reduced state by two triphenylphosphines, in which 4-fluorobenzaldehyde thiosemicarbazone and N-methylthiosemicarbazone act as chelating through their sulfur and imino nitrogen. The three oxoanions that have been chosen, NO₃⁻, SO₄²⁻ and CH₃COO⁻, play an important role: their oxygens are bad competitors with the imino nitrogen of the thiosemicarbazone moiety and moreover they form strong charge assisted hydrogen bondings that stabilize the neutral form of the ligand. The overall packing is determined by intermolecular phenyl–phenyl van der Waals interactions.     

Synthesis and characterization of new organotin(IV) complexes with polyfunctional ligands

New mono-, di- and tri-organotin(IV) derivatives containing the neutral bis(2-pyridylthio)methane ligand, [(pyS)₂CH₂] and tris(2-pyridylthio)methane ligand, [(pyS)₃CH] have been synthesized from reaction with SnR_nCl_4−n (R = Me, ⁿBu, Ph and Cy, n = 1-3) acceptors. Mono-nuclear adducts of the type {[(pyS)₂CH₂]R_nSnCl_4−n} and {[(pyS)₃CH]R_nSnCl_4−n} have been obtained and characterized by elemental analyses, FT-IR, ESI-MS, multinuclear (¹H and ¹¹⁹Sn) NMR spectral data. The ¹H and ¹¹⁹Sn NMR and ESI-MS data suggest for the triorganotin(IV) derivatives a complete dissociation of the compounds in solution. The mono- and di-organotin(IV) derivatives show a greater stability in solution, and their spectroscopic data are in accordance with the existence of six-coordinated RSnCl₃N₂ or R₂SnCl₂N₂ species.     

Colorimetric and fluorescent chemosensor for citrate based on a rhodamine and Pb complex in aqueous solution

In this paper we unveil a novel rhodamine compound based fluorescent chemosensor (1-Pb²⁺) for colormetric and fluorescent detection of citrate in aqueous solution. This is the first fluorescent chemosensor for citrate based on rhodamine compound. The comparison of this method with some other fluorescence methods for citrate indicates that the method can detect citrate in aqueous solution by both color changes and fluorescent changes with long emission wavelength. In the new developed sensing system, 1-Pb²⁺ is fluorescent due to Pb²⁺-induced fluorescence enhancement of 1. However, the addition of citrate may release 1 into the solution with quenching of fluorescence. The chemosensor can be applied to the quantification of citrate with a linear range covering from 1.0 × 10⁻⁷ to 5.0 × 10⁻⁵ M and a detection limit of 2.5 × 10⁻⁸ M. The experiment results show that the response behavior of 1-Pb²⁺ towards citrate is pH independent in medium condition (pH 6.0–8.0). Most importantly, the fluorescence changes of the chemosensor are remarkably specific for citrate in the presence of other anions (even those that exist in high concentration), which meet the selective requirements for practical application. Moreover, the response of the chemosensor toward citrate is fast (response time less than 1 min). In addition, the chemosensor has been used for determination of citrate in urine samples with satisfactory results.     

A new fluorescent chemosensor for F based on inhibition of excited-state intramolecular proton transfer

New fluorescent chemosensor 1 with two amidoanthraquinone groups (1-AAQs) at the lower rim of p-tert-butylcalix[4]arene has been synthesized. The significant changes of absorption and fluorescence bands show that chemosensor 1 is selective toward fluoride ion (F⁻) over other anions such as Cl⁻, Br⁻, I⁻, CH₃COO⁻, , , and OH⁻. The ESIPT process of 1 is inhibited by the fluoride-induced H-bonding followed by deprotonation of NH of the 1-AAQ.     

REACTIONS OF A PHOSPHORANIMINE ANION WITH SOME ORGANIC ELECTROPHILES

Abstract

The reactions of a variety of electrophiles with the N-silyl-P-trifluoroethoxyphosphoranimine anion Me₃Sin°P(Me)(OCH₂CF₃)CH^? ₂ (1a), prepared by the deprotonation of the dimethyl precursor Me₃SiN[dbnd]P(OCH₂CF₃)Me₂ (1) with n-BuLi in Et₂O at-78°C, were studied. Thus, treatment of 1a with alkyl halides, ethyl chloroformate, or bromine afforded the new N-silylphosphoranimine derivatives Me₃SiN[dbnd]P(Me)(OCH₂CF₃)CH₂R [2: R = Me, 3: R = CH₂Ph, 4: R = CH[sbnd]CH₂, 5: R = C(O)OEt, and 6: R = Br]. In another series, when 1a was allowed to react with various carbonyl compounds, 1,2-addition of the anion to the carbonyl group was observed. Quenching with Me₃SiCl gave the O-silylated products Me₃SiN[dbnd]P(Me)(OCH₂CF₃)CH₂°C(OSiMe₃)R¹R² [7: R ¹ = R ² = Me; 8: R ¹ = Me, R ² = Ph; 9: R¹ = Me, R ² = CH[sbnd]CH₂; and 10: R ¹ = H, R ² = Ph]. Compounds 2–10 were obtained as distillable, thermally stable liquids and were characterized by NMR spectroscopy (¹H, ¹³C, and ³¹P) and elemental analysis.     

Preparation of a fluorescent sensor based on BODIPY-functionalized hydroxyapatite nanoparticles and spectroscopic study of the Cd2+ and Zn2+ complex formation

A new fluorescent chemosensor 1, which based on hydroxyapatite (HA) nanoparticles covalently functionalized with a difluoroboron dipyrromethene, has been prepared by nucleophilic substitution of the fluorescent dye 3-chloro-4,4-difluoro-8-(4-tolyl)-5-[bis(pyridine2-ylmethyl)amino]-4-bora-3a,4a-diaza-s-indacene (2) with surface-modified HA nanoparticles. The HA particles were prepared by using SiO₂ as templates (THA) with 3-(aminopropyl)triethoxysilane (THA-APTES). Substitution of the electron-withdrawing chlorine in 2 by an electron-donating amino group of HA changes the properties of the nanoparticles 1 and the corresponding fluorescent dye 2. Absorption and emission maxima of 1 in ethanol are red-shifted by 75 and 30?nm, respectively, in comparison with those of 2. In contrast to no selectivity of dye 2 for Cd²⁺ or Zn²⁺ in EtOH/H₂O (95/5?V/V) solutions, the nanofluorescent probe 1 forms 1?:?1 complexes with Cd²⁺ or Zn²⁺, producing an instant color change along with large hypsochromic shifts in the absorption and fluorescence spectra by 70 and 35?nm, respectively, and large cation-induced fluorescence amplifications.     

Synthesis,spectroscopic characterization,X-ray structure and DFT calculations of copper(II) complex with 2-(2-pyridyl)benzimidazole

The reaction of copper(II) nitrate trihydrate and 2-(2-pyridyl)benzimidazole (pybzim) leads to [Cu(pybzim)₂(NO₃)](NO₃). The compound has been studied by IR, UV–Vis spectroscopy and X-ray crystallography. The electronic structure of the [Cu(pybzim)₂(NO₃)]⁺ cation has been calculated with the density functional theory (DFT) method. The spin-allowed doublet–doublet electronic transitions of [Cu(pybzim)₂(NO₃)]⁺ have been calculated with the time-dependent DFT method, and the UV–Vis spectrum of the title compound has been discussed on this basis.     

Unmodified fluorescein as a fluorescent chemosensor for fluoride ion detection

Unmodified fluorescein (1) behaves as a fluorescent chemosensor for F⁻ detection, where the F⁻-induced fluorescence enhancement is driven by a transfer of the phenolic OH protons to F⁻.