Quantitative analysis of crystallization kinetics by light depolarization technique. Possibilities and limitations

The kinetics of isothermal crystallization of various polymers was investigated by light depolarization technique (LDT) using the new setup with direct registration of depolarization ratio. Experimental data were analyzed using new method proposed by Ziabicki who shown that degree of crystallinity is a non-linear function of degree of depolarization, crystal thickness, and its birefringence. Other experimental methods were involved providing supplementary information on crystal thickness (SAXS) and allowing comparison of crystallization kinetics (WAXS, DSC). The advantage of LDT relies on high sampling rate allowing on-line measurements and lack of inertia effects that exist in other methods like calorimetry. The limitations of the applicability of the method are discussed. The method needs supplementary information not only on crystal thickness but also on variable optical birefringence of real crystals. Our results show that LDT can be used in a simple way for investigation of crystallization kinetics at relatively high temperatures, providing large and perfect crystals. In such a case it is sufficient to use crystal intrinsic birefringence and final crystal thickness typical at particular temperature of crystallization. On the other hand, depolarization ratio combined with measurements by other methods (crystallinity and crystal thickness) can be used for estimation of crystal birefringence.     

Zur Methodik der Elementspezies-Analytik in Lebensmitteln

Summary Potentiometry with an ion-selective electrode as well as a cation-chelate-exchange procedure (combined with AAS) are presented as useful methods for the determination of stabilities of element species, for example of calcium in milk. The cation-exchange procedure is also applicable to other metals (e.g., magnesium) and other foodstuffs (e.g., meat extracts). New results of Ca- and Mg-extractabilities by the use of different aqueous extraction solutions (including enzymic solutions) are reported. Ultrafiltration, dialysis and gel-chromatography are further methods especially for the separation and analysis of protein-containing element species. Unoccupied binding fields can be detected after addition of Cu(II) ions by combination of gel chromatography and UV/VIS spectroscopy, as shown by example of rape-flour. The experiences gained in the analysis of element species in foodstuffs are combined to a strategy of analysis.     

Modelling uncertainty in a concentration range

Combined uncertainty modelling in a concentration range is an important task for laboratories. Despite several models and regression methods reported, unsolved problems remain, including variability and type of distribution of combined uncertainty estimations and the influence of these on modelling. Intralaboratory data of eight trace elements in natural waters by flame atomic absorption spectrometry and interlaboratory data from some ISO standards were used as an experimental basis. Starting from these and applying the bootstrap technique, high relative variability of combined uncertainty estimations (second-order uncertainty) was found, but normal distributions or distributions with small deviations from normality were encountered. Linear and/or variance models are appropriate for modelling the analyzed data when ordinary weighted least-squares or repeat median robust regression methods are applied. The influences of combined uncertainty variability on modelling and the effect of points that do not follow the general trend of the remaining points are discussed. Some other guidelines are offered.     

Monitoring the effect of chemicals on biological communities. The biofilm as an interface

Biofilms can be regarded as early warning systems for detection of the effects of toxicants on aquatic systems, because they have been successfully used for detection of other environmental stressors (e.g. pH, salinity, organic pollution). A variety of methods is used for detection of the effects of toxicants by use of biofilms. The methods range from structurally-based to functionally-based, and from in vitro-based to systemic approaches. Physiological approaches may be appropriate for detection of acute effects. Among these methods, photosynthesis is more related to the effect of toxicants affecting algal communities, directly or indirectly, and extracellular enzyme activity is less specific. Selecting one or the other may depend on the suspected direct effect of the toxicant. Integrated studies have revealed the relevance of toxicants to top-down or bottom-up regulation of the biofilm community. Persistent or chronic effects should affect other biofilm indicators, for example growth or biomass-related factors (e.g. chlorophyll), or community composition. Among these, community composition might better reflect the effects of the toxicant(s), because this may cause a shift from a sensitive to a progressively tolerant community. Community composition-based approaches do not usually adequately reflect cause–effect relationships and require complementary analysis of properties affected in the short-term, for example physiological properties. The current array of methods available must be wisely combined to disentangle the effects of chemicals on biofilms, and whether these effects are transient or persistent, to successfully translate the chemical action of toxicants into the effect they might have on the river ecosystem.     

Sorption preconcentration in combined methods for the determination of noble metals

Combined methods for the determination of noble metals with the use of sorption preconcentration with complexing, anion-exchange, and other sorbents are reviewed. Characteristics of sorbents, techniques of sorption preconcentration, and techniques for the preparation of a concentrate for determination are considered. Features of instrumental methods for the determination of noble metals in the analysis of different materials are discussed. Examples of the use of sorption preconcentration in combined methods for the determination of noble metals are given from publications between 1996–2005.     

Determining the geometry of hydrogen bonds in solids with picometer accuracy by quantum-chemical calculations and NMR spectroscopy.

The structure of multiply hydrogen-bonded systems is determined with picometer accuracy by a combined solid-state NMR and quantum-chemical approach. On the experimental side, advanced 1H-15N dipolar recoupling NMR techniques are capable of providing proton-nitrogen distances of up to about 250 pm with an accuracy level of +/-1 pm for short distances (i.e., around 100 pm) and +/-5 pm for longer ones (i.e., 180 to 250 pm). The experiments were performed under fast magic-angle spinning, which ensures sufficient dipolar decoupling and spectral resolution of the 1H resonance lines. On the quantum-chemical side, the structures of the hydrogen-bonded systems were computationally optimised, yielding complete sets of nitrogen-proton and proton-proton distances, which are essential for correctly interpreting the experimental NMR data. In this way, nitrogen-proton distances were determined with picometer accuracy, so that vibrational averaging effects on dipole-dipole couplings need to be considered. The obtained structures were finally confirmed by the complete agreement of computed and experimental 'H and '5N chemical shifts. This demonstrates that solid-state NMR and quantum-chemical methods ideally complement each other and, in a combined manner, represent a powerful approach for reliable, high-precision structure determination whenever scattering techniques are inapplicable.     

Multiple grid methods for classical molecular dynamics

Presented in the context of classical molecular mechanics and dynamics are multilevel summation methods for the fast calculation of energies/forces for pairwise interactions, which are based on the hierarchical interpolation of interaction potentials on multiple grids. The concepts and details underlying multigrid interpolation are described. For integration of molecular dynamics the use of different time steps for different interactions allows longer time steps for many of the interactions, and this can be combined with multiple grids in space. Comparison is made to the fast multipole method, and evidence is presented suggesting that for molecular simulations multigrid methods may be superior to the fast multipole method and other tree methods.     

Miniaturized sample preparation combined with liquid phase separations

Miniaturized sample preparation methods designed as the sample pretreatment for liquid phase separations, such as liquid chromatography, capillary electrophoresis and capillary electrochromatography, have been reviewed especially for the on-line coupling of the sample preparation process and the separation process. The development of the desorption interfaces for the effective combining of the sample preparation and subsequent liquid phase separations is briefly described along with the applications of the combined analytical systems to the analysis of complex sample mixtures such as biological and environmental matrices. Novel use of fine polymeric filaments as the extraction medium for microscale liquid phase separation methods are investigated and a comparison is made with other sample preparation techniques. Polymer coating onto the fibrous material is also introduced to further develop microscale sample preparation methods with improved extraction performance. Several other microscale sample preparation methods having a potential compatibility to the liquid phase separations are also described for future applications of these techniques.     

芳香环状低聚体的结构表征

综述了芳香环状低聚体结构表征的发展过程及最新进展,以高效液相色谱、快原子（离子）轰击质谱、激光质谱、电喷雾质谱为主结合其他辅助方法分别做以介绍并比较了各种表征方法的特点及应用范围。     

Glycosides ofPatrinia sibirica. II

Chemistry of Natural Compounds - It has been established that two trisaccharide chains are present in sibiroside C, one combined with the 3-hydroxyl and the other with the 28-carboxyl of...     

生物,环境样品和食品中铅的痕量分析

主要根据近七年来发表的有关论文，综述了我国生物、环境样品和食品中铅和痕量分析技术进展，内容包括分子光谱、原子光谱、电化学和其他分析方法，以及联用技术和前处理等方面，收集文献３９３篇。     

A new and efficient variable selection algorithm based on ant colony optimization. Applications to near infrared spectroscopy/partial least-squares analysis

A new variable selection algorithm is described, based on ant colony optimization (ACO). The algorithm aim is to choose, from a large number of available spectral wavelengths, those relevant to the estimation of analyte concentrations or sample properties when spectroscopic analysis is combined with multivariate calibration techniques such as partial least-squares (PLS) regression. The new algorithm employs the concept of cooperative pheromone accumulation, which is typical of ACO selection methods, and optimizes PLS models using a pre-defined number of variables, employing a Monte Carlo approach to discard irrelevant sensors. The performance has been tested on a simulated system, where it shows a significant superiority over other commonly employed selection methods, such as genetic algorithms. Several near infrared spectroscopic experimental data sets have been subjected to the present ACO algorithm, with PLS leading to improved analytical figures of merit upon wavelength selection. The method could be helpful in other chemometric activities such as classification or quantitative structure-activity relationship (QSAR) problems.     

A computer program for a general case evaluation of the expanded uncertainty

The ISO Guide to the Expression of Uncertainty in Measurement provides a uniform method for the evaluation of combined standard uncertainty of a measurand whose expectation and standard deviation are stable over the measurement period. However, the method provided for the evaluation of the expanded uncertainty is not complete. Particularly, it does not include the case where the contributing components are correlated. Also, the probability distribution of the combined uncertainty must be close to a Normal distribution otherwise other methods must be used. The method presented here, which is implemented in a computer program, is based on a combination of the ISO guide method and Monte-Carlo simulation.The Monte-Carlo Simulation can obtain the data needed for the evaluation of the expanded and standard uncertainties directly from the measurement equation (that defines the measurand in terms of the contributing components) or from a spreadsheet-like format. Some sample results obtained by the computer program using both methods are compared and discussed.     

Rapid methods for detection and enumeration of Campylobacter spp. in foods

Campylobacter spp. are the most commonly reported bacterial cause of acute diarrheal disease in humans throughout the world. Traditional cultural methods for the detection and quantitation of Campylobacterspp. are slow and tedious; therefore, specific, sensitive, and rapid methods for campylobacters are needed to collect sufficient data for risk assessment and food safety policy development. We developed several rapid methods based on polymerase chain reaction (PCR), DNA hybridization, hydrophobic grid membrane filters (HGMFs), and enzyme immunoassays (EIAs). A PCR assay targeting C. jejuni, combined with a simple sample preparation procedure, detects as few as 0.3 most probable number (MPN)/mL C. jejuni in naturally contaminated chicken rinses after 20-24 h enrichment. An HGMF-EIA method using a commercial polyclonal antibody for Campylobacter detects and enumerates thermophilic Campylobacter spp. from spiked chicken rinse and milk, and naturally contaminated chicken rinses. A C. jejuni-specific probe in an HGMF-DNA hybridization protocol specifically detects and quantitates C. jejuni in food samples. A dot-blot EIA combined with an MPN procedure quantitates thermophilic campylobacters from samples that might be difficult to filter through HGMFs.     

Application of graphical methods of spin algebras to limited CI approaches. I. Closed shell case

The time independent diagrammatic technique based on the mathematical methods of quantum electrodynamics (second quantization, Wick's theorem, Feynman-like diagrams) is combined with graphical techniques of spin algebras to derive general expressions for the matrix elements of spin independent one- and two-particle operators between spin symmetry adapted ground, mono- and bi-excited configurations of a closed shell system. Two coupling schemes are considered for bi-excited states and their relative merits are discussed. Finally, the results are used to derive compact expressions for the coupling coefficients of the direct configuration interaction from molecular integrals (CIMI ) method.     

Analysis of fumigants and fumigant residues.

The terms fumigant and fumigant residue are defined. Interrelationships between physically and chemically bound residues, storage environments, nature of the substrate and other influencing factors are outlined. Analytical methods include polarography by DME and RPE, titrimetry, spectrophotometry, and GC with microthermal conductivity, hydrogen flame ionization, electron capture, microcoulometric, thermionic, and flame photometric detector systems, with backup by enzymatic, radiometric, NAA and X-ray flourescence methods. Various aspects are illustrated with different fumigants used commercially. Supplementary methods to extend the power and usefulness of analytical methods in fumigant research are indicated.     

Thermal degradation of poly(alkyl acrylates). I. Preliminary investigations

A qualitative survey of the thermal degradation reactions which occur in poly(ethyl acrylate), poly(n-propyl acrylate), poly(isopropyl acrylate), poly(n-butyl acrylate) and poly(2-ethylhexyl acrylate) has been made by using three thermal analytical methods: thermogravimetric analysis (TGA), thermal volatilization analysis (TVA), and the dynamic molecular still (DMS), all combined with infrared and mass spectrometry. Degradation in poly(isopropyl acrylate), which is a secondary ester, becomes discernible at 260°C and proceeds in two stages. The other four polymers, which are all primary esters, are more stable. They degrade in a single-stage process starting at 300°C. The principal volatile products from the primary esters are carbon dioxide and the olefin and alcohol corresponding to the alkyl group. A roughly equivalent quantity of short-chain fragments is also formed. From poly(isopropyl acrylate), carbon dioxide and propylene are the only volatile products in the first phase of the reaction.     

Numerical solution of the nonlinear Poisson–Boltzmann equation: Developing more robust and efficient methods

We present a robust and efficient numerical method for solution of the nonlinear Poisson-Boltzmann equation arising in molecular biophysics. The equation is discretized with the box method, and solution of the discrete equations is accomplished with a global inexact-Newton method, combined with linear multilevel techniques we have described in an article appearing previously in this journal. A detailed analysis of the resulting method is presented, with comparisons to other methods that have been proposed in the literature, including the classical nonlinear multigrid method, the nonlinear conjugate gradient method, and nonlinear relaxation methods such as successive overrelaxation. Both theoretical and numerical evidence suggests that this method will converge in the case of molecules for which many of the existing methods will not. In addition, for problems which the other methods are able to solve, numerical experiments show that the new method is substantially more efficient, and the superiority of this method grows with the problem size. The method is easy to implement once a linear multilevel solver is available and can also easily be used in conjunction with linear methods other than multigrid. © 1995 by John Wiley & Sons, Inc.     

光电流谱、光致发光光谱和紫外可见吸收光谱在纳米半导体光电器件研究中的联用

在纳米半导体中由于纳米效应(如量子尺寸效应),其电子结构与块体半导体有所不同。进一步地,当纳米半导体与基底和其他组分结合制成器件后,其性质又受到基底或其他组分的影响,这两点导致了基于纳米半导体的光电器件的性能以及相应表征方法也大不相同。将光电流谱、光致发光光谱和紫外可见吸收光谱三种技术有机地结合起来,可以更好地表征纳米半导体的电子性质和光电性能。本文根据纳米半导体材料与电极的电子性质特点及其测量,结合本课题组前期工作,举例介绍三种谱学方法相结合应用于探究光伏电池和电致发光器件的纳米半导体材料的性能,以及纳米半导体材料表面态的表征。     

Higher-order spatial discretisations in electrochemical digital simulations. Part 4. Discretisation on an arbitrarily spaced grid

A systematic approach to the construction of finite difference formulae for the approximation to first and second derivatives with respect to space on an arbitrarily spaced grid is presented. The finite difference formulae, combined with backward implicit (BI) and extrapolation methods, are used for electrochemical simulations and tested for efficiency. Excellent results are obtained with second and third order discretisations even for very small space intervals in the vicinity of the electrode and strongly expanding grid spacings. This ensures efficient simulation of kinetic-diffusion systems where, due to a fast homogeneous reaction, a thin reaction layer is formed adjacent to the electrode.