Distinct electronic effects on reductive eliminations of symmetrical and unsymmetrical bis-aryl platinum complexes

Symmetrical bis-aryl platinum complexes (DPPF)Pt(C(6)H(4)-4-R)(2) (R = NMe(2), OMe, CH(3), H, Cl, CF(3)) and electronically unsymmetrical bis-aryl platinum complexes (DPPF)Pt(C(6)H(4)-4-R)(C(6)H(4)-4-X) (R = CH(3), X = NMe(2), OMe, H, Cl, F, CF(3); R = OMe, X = NMe(2), H, Cl, F, CF(3); R = CF(3), X = H, Cl, NMe(2); and R = NMe(2), X = H, Cl) were prepared, and the rates of reductive elimination of these complexes in the presence of excess PPh(3) are reported. The platinum complexes reductively eliminated biaryl compounds in quantitative yields with first-order rate constants that were independent of the concentration of PPh(3). Plots of Log(k(obs)/k(obs(H))) vs Hammett substituent constants (sigma) of the para substituents R and X showed that the rates of reductive elimination reactions depended on two different electronic properties. The reductive elimination from symmetrical bis-aryl platinum complexes occurred faster from complexes with more electron-donating para substituents R. However, reductive elimination from a series of electronically unsymmetrical bis-aryl complexes was not faster from complexes with the more electron-donating substituents. Instead, reductive elimination was faster from complexes with a larger difference in the electronic properties of the substituents on the two platinum-bound aryl groups. The two electronic effects can complement or cancel each other. Thus, this combination of electronic effects gives rise to complex, but now more interpretable, free energy relationships for reductive elimination.     

Structural and catalytic studies of lithium complexes bearing pendant aminophenolate ligands

Lithium complexes bearing mono-anionic aminophenolate ligands are described. Reactions of ligand precursors HON(Me)Ph(OMe), HON(Me)Ph(SMe), HON(Me)C(OMe) or HON(Me)C(NMe2) [HON(Me)Ph(OMe) = (2-OMeC6H4CH2)N(Me)(CH2-2-HO-3,5-C6H2((t)Bu)2); HON(Me)Ph(SMe)= (2-SMe-C6H4CH2)N(Me)(CH2-2-HO-3,5-C6H2((t)Bu)2); HON(Me)C(OMe) = (MeOCH(2)CH2)N(Me)(CH2-2-HO-3,5-C6H2((t)Bu)2); HON(Me)C(NMe2) = (Me2NCH2CH2)N(Me)(CH2-2-HO-3,5-C6H2((t)Bu)2)] with 1.1-1.3 molar equivalents of (n)BuLi in diethyl ether solution afford (LiON(Me)Ph(OMe))(2) (3), (LiON(Me)Ph(SMe))2 (4), (LiON(Me)C(OMe))2 (5) and (LiON(Me)C(NMe2))2 (6) as dinuclear lithium complexes. The BnOH adduct of , (BnOH)(LiON(Me)C(OMe)) (7), was prepared from the reaction of and BnOH in diethyl ether solution. The molecular structures are reported for ligand precursor HON(Me)Ph(SMe) and compounds 3-5 and 7. These dinuclear lithium complexes show excellent catalytic activities toward the ring-opening polymerization of L-lactide in the presence of benzyl alcohol.     

Synthesis and spectroscopy of N3P3X5OCH=CH2 (X = Cl, F, OCH3, OCH2CF3, N(CH3)2) and N3P3X4(OCH=CH2)2 (X = Cl, N(CH3)2). Correlations of ultraviolet photoelectron spectroscopy and nuclear magnetic resonance data to electronic and geometrical structure

The syntheses of the vinyloxycyclotriphosphazene derivatives N3P3X5OCH=CH2 (X = OMe, OCH2CF3) and the N3P3(NMe2)4(OCH=CH2)2 isomeric mixture along with improved preparations of N3P3X5OCH=CH2 (X = F, NMe2) are reported. The interactions between the vinyloxy function and the cyclophosphazene in these and the previously reported N3P3Cl5 (OCH=CH2) and N3P3F6-n(OCH=CH2)n (n = 1-4) have been examined by ultraviolet photoelectron spectroscopy (UPS) and NMR spectroscopy. The UPS data for the chloro and fluoro derivatives show a strong electron-withdrawing effect of the phosphazene on the olefin that is mediated with decreasing halogen substitution. The 1H and 13C NMR data for N3P3X5OCH=CH2 (X = F, Cl, OMe, OCH2CF3, NMe2) show significant changes as a function of the phosphazene substituent. There is a linear correlation between the beta-carbon chemical shift on the vinyloxy unit and the phosphorus chemical shift at the vinyloxyphosphorus centers. The chemical shifts of the different phosphorus centers on each ring are also related in a linear fashion. These relationships may be understood in terms of the relative electron donor-acceptor abilities of the substituents on the phosphazene ring. The 1H NMR spectra of the N3P3(NMe2)4(OCH-CH2)2 isomeric mixture allow for assignment of the relative amounts of cis and trans isomers. A model for the observed cis preference in the formation of N3P3Cl4(OCH=CH)2 is presented.     

An examination of hyperconjugative and electrostatic effects in the hydride reductions of 2-substituted-4-tert-butylcyclohexanones

To better understand electronic effects on the diastereoselectivity of nucleophilic additions to the carbonyl group, a series of 2-X-4-tert-butylcyclohexanones (X = H, CH(3), OCH(3), F, Cl, Br) were reacted with LiAlH(4). Reduction of ketones with equatorial substituents yields increasing amounts of axial alcohol in the series for X [H < CH(3) < Br < Cl < F < OCH(3)]. These data cannot be explained by steric or chelation effects or by the theories of Felkin-Anh or Cieplak. Instead, an electrostatic argument is introduced: due to repulsion between the nucleophile and the X group, axial approach becomes energetically less favorable with an increase in the component of the dipole moment anti to the hydride approach trajectory. The ab initio calculated diastereoselectivities were close to the experimental values but did not reproduce the relative selectivity ordering among substituents. For reduction of ketones with axial substituents, increasing amounts of axial alcohol are seen in the series for X [Cl < Br < CH(3) < OCH(3) < H < F]. After some minor adjustments are made, this ordering is consistent with both the electrostatic model and Felkin-Anh theory. Cieplak theory cannot account for these data regardless of adjustments. Ab initio calculated diastereoselectivities were reasonably accurate for the nonpolar substituents but were poor for the polar substituents.     

Electronic and medium effects on the rate of arene C [bond] H activation by cationic Ir(III) complexes

A detailed mechanistic study of arene C [bond] H activation in CH(2)Cl(2) solution by Cp(L)IrMe(X) [L = PMe(3), P(OMe)(3); X = OTf, (CH(2)Cl(2))BAr(f); (BAr(f) = B[3,5-C(6)H(3)(CF(3))(2)](4))(-)] is presented. It was determined that triflate dissociation in Cp(L)IrMe(OTf), to generate tight and/or solvent-separated ion pairs containing a cationic iridium complex, precedes C [bond] H activation. Consistent with the ion-pair hypothesis, the rate of arene activation by Cp(L)IrMe(OTf) is unaffected by added external triflate salts, but the rate is strongly dependent upon the medium. Thus the reactivity of Cp(PMe(3))IrMe(OTf) can be increased by almost 3 orders of magnitude by addition of (n-Hex)(4)NBAr(f), presumably because the added BAr(f) anion exchanges with the OTf anion in the initially formed ion pair, transiently forming a cation/borate ion pair in solution (special salt effect). In contrast, addition of (n-Hex)(4)NBAr(f) to [CpPMe(3)Ir(Me)CH(2)Cl(2)][BAr(f)] does not affect the rate of benzene activation; here there is no initial covalent/ionic pre-equilibrium that can be perturbed with added (n-Hex)(4)NBAr(f). An analysis of the reaction between Cp(PMe(3))IrMe(OTf) and various substituted arenes demonstrated that electron-donating substituents on the arene increase the rate of the C [bond] H activation reaction. The rate of C(6)H(6) activation by [Cp(PMe(3))Ir(Me)CH(2)Cl(2)][BAr(f)] is substantially faster than [Cp(P(OMe)(3))Ir(Me)CH(2)Cl(2)][BAr(f)]. Density functional theory computations suggest that this is due to a less favorable pre-equilibrium for dissociation of the dichloromethane ligand in the trimethyl phosphite complex, rather than to a large electronic effect on the C [bond] H oxidative addition transition state. Because of these combined effects, the overall rate of arene activation is increased by electron-donating substituents on both the substrate and the iridium complex.     

Silyl,hydrido-silylene,or other bonding modes: some unusual structures of [(dhpe)Pt(SiHR2)]+ (dhpe = H2P-CH2-CH2-PH2; R = H,Me, SiH3, Cl,OMe, NMe2) and [(dhpe)Pt(SiR3)](+) (R = Me,Cl) from DFT calculations

DFT (B3LYP) calculations have been carried out in order to quantitatively evaluate the energies and stereochemistry of the accessible structures of [(dhpe)Pt(SiHR(2))](+) (dhpe = H(2)P-CH(2)-CH(2)-PH(2); R = H, CH(3), SiH(3), Cl, OMe, SMe, NMe(2)) and of [(dhpe)Pt(SiR(3))](+) (R = CH(3), Cl). A number of different isomers have been located. The expected terminal silyl or hydrido-silylene complexes are often not the most stable complexes. An isomer in which an H or an R group bridges a Pt=SiHR or Pt=SiR(2) bond is found to compete with the terminal silyl or hydrido-silylene isomers. In some cases, isomers derived from cleavage of a C-H bond and formation of a silene or disilene ligand are obtained. The structures of the platinum silyls differ from that of the equivalent alkyl complex, calculated for [(dhpe)Pt(CH(3))](+).     

What is the best bonding model of the (σ-H-BR) species bound to a transition metal? Bonding analysis in complexes [(H)2Cl(PMe3)2M(σ-H-BR)] (M = Fe, Ru, Os)

Density Functional Theory calculations have been performed for the σ-hydroboryl complexes of iron, ruthenium and osmium [(H)(2)Cl(PMe(3))(2)M(σ-H-BR)] (M = Fe, Ru, Os; R = OMe, NMe(2), Ph) at the BP86/TZ2P/ZORA level of theory in order to understand the interactions between metal and HBR ligands. The calculated geometries of the complexes [(H)(2)Cl(PMe(3))(2)Ru(HBNMe(2))], [(H)(2)Cl(PMe(3))(2)Os(HBR)] (R = OMe, NMe(2)) are in excellent agreement with structurally characterized complexes [(H)(2)Cl(P(i)Pr(3))(2)Os(σ-H-BNMe(2))], [(H)(2)Cl(P(i)Pr(3))(2)Os{σ-H-BOCH(2)CH(2)OB(O(2)CH(2)CH(2))}] and [(H)(2)Cl(P(i)Pr(3))(2)Os(σ-H-BNMe(2))]. The longer calculated M-B bond distance in complex [(H)(2)Cl(PMe(3))(2)M(σ-H-BNMe(2))] are due to greater B-N π bonding and as a result, a weaker M-B π-back-bonding. The B-H2 bond distances reveal that (i) iron complexes contain bis(σ-borane) ligand, (ii) ruthenium complexes contain (σ-H-BR) ligands with a stretched B-H2 bond, and (iii) osmium complexes contain hydride (H2) and (σ-H-BR) ligands. The H-BR ligands in osmium complexes are a better trans-directing ligand than the Cl ligand. Values of interaction energy, electrostatic interaction, orbital interaction, and bond dissociation energy for interactions between ionic fragments are very large and may not be consistent with M-(σ-H-BR) bonding. The EDA as well as NBO and AIM analysis suggest that the best bonding model for the M-σ-H-BR interactions in the complexes [(H)(2)Cl(PMe(3))(2)M(σ-H-BR)] is the interaction between neutral fragments [(H)(2)Cl(PMe(3))(2)M] and [σ-H-BR]. This becomes evident from the calculated values for the orbital interactions. The electron configuration of the fragments which is shown for C in Fig. 1 experiences the smallest change upon the M-σ-H-BR bond formation. Since model C also requires the least amount of electronic excitation and geometry changes of all models given by the ΔE(prep) values, it is clearly the most appropriate choice of interacting fragments. The π-bonding contribution is 14-22% of the total orbital contribution.     

Electronic control of the regiochemistry in palladium-phosphine catalyzed intermolecular Heck reactions

Density functional theory calculations of the transition-state structures and reaction barriers for the C-C coupling between monosubstituted eta(2)-olefins and eta(1)-vinyl for neutral [PdI(PH(3))(vinyl)(RCHCH(2))] and cationic [Pd(H(2)PCH(2)PH(2))(vinyl)(RCHCH(2))](+) (R = OMe, Me, and CN) depend mostly on the regiochemistry and not on the starting position of the olefin substituent. The regiochemistry is thus implicit in the electronic structure of the precursor complex. A selectivity index, Omega, based on electrostatic and frontier orbital interactions gives a good correlation with experiment for vinylations or arylations. The model correctly predicts that the regiochemistry for R = OMe, Me, and CN is the same for both neutral and cationic Pd complexes while for R = CH(2)OH the regiochemistry reverses. The latter is confirmed by explicit calculations of the transition-state energies. Selectivity indices are computed for 13 substituents: CO(2)Me, CN, CF(3), Ph, H, Me, CH(2)OH, CH(2)NMe(2), 2-pyrolidone, CH(2)SiMe(3), OAc, OMe, and F. Cationic conditions systematically give larger Omega values and thus tend to favor coupling at the alpha carbon on the olefin. The Omega values are approximately additive and can be used to predict the regiochemistry for disubstituted olefins.     

Synthetic and structural studies of donor-functionalized alkoxy derivatives of gallium

The synthesis of a range of alkyl/chloro-gallium alkoxide and amido/alkoxide compounds was achieved via a series of protonolysis and alcoholysis steps. The initial reaction involved the synthesis of [Me(Cl)Ga{N(SiMe(3))(2)}](2) (1) via methyl group transfer from the reaction of GaCl(3) with two equivalents of LiN(SiMe(3))(2). Reaction of 1 with varying amounts of ROH resulted in the formation of [Me(Cl)Ga(OR)](2) (2, R = CH(2)CH(2)OMe; 3, CH(CH(3))CH(2)NMe(2)), [Me(Cl)Ga{N(SiMe(3))(2)}(μ(2)-OR)Ga(Cl)Me] (4, R = CH(2)CH(2)NMe(2)), or [MeGa(OR)(2)] (5, R = CH(CH(3))CH(2)NMe(2)). Compound 4 represents an intermediate in the formation of dimeric complexes, of the type [Me(Cl)Ga(OR)](2), when formed from compound [Me(Cl)Ga{N(SiMe(3))(2)}](2). A methylgallium amido/alkoxide complex [MeGa{N(SiMe(3))(2)}(OCH(2)CH(2)OMe)](2) (6) was isolated when 2 was further reacted with LiN(SiMe(3))(2). In addition, reaction of 2 with HO(t)Bu resulted in a simple alcohol/alkoxide exchange and formation of [Me(Cl)Ga(O(t)Bu)](2) (7). In contrast to the formation of 1, the in situ reaction of GaCl(3) with one equivalent of LiN(SiMe(3))(2) yielded [Cl(2)Ga{N(SiMe(3))(2)}](2) in low yield, where no methyl group transfer has occurred. Reaction of alcohol with [Cl(2)Ga{N(SiMe(3))(2)}](2) was then found to yield [Cl(2)Ga(OR)](2) (8, R = CH(2)CH(2)NMe(2)), and further reaction of 8 with LiN(SiMe(3))(2) yielded the gallium amido alkoxide complex, [ClGa{N(SiMe(3))(2)}(OR)](2) (9, R = CH(2)CH(2)NMe(2)), similar to 6. The structures of compounds 4, 5, 7, and 8 have been determined by single-crystal X-ray diffraction.     

Copper-dioxygen adducts and the side-on peroxo dicopper(II)/bis(mu-oxo) dicopper(III) equilibrium: Significant ligand electronic effects

The variation of ligand para substituents on pyridyl donor groups of tridentate amine copper(I) complexes was carried out in order to probe electronic effects on the equilibrium between mu-eta2:eta2-(side-on)-peroxo [Cu(II)2(O2(2-))]2+ and bis(mu-oxo) [Cu(III)2(O(2-))2] species formed upon reaction with O2. [Cu(I)(R-PYAN)(MeCN)n]B(C6F5)4 (R-PYAN = N-[2-(4-R-pyridin-2-yl)-ethyl]-N,N',N'-trimethyl-propane-1,3-diamine, R = NMe2, OMe, H, and Cl) (1R) vary over a narrow range in their Cu(II)/Cu(I) redox potentials (E(1/2) vs Fe(cp)2(+/0) = -0.40 V for 1(NMe2), -0.38 V for 1(OMe), -0.33 V for 1H, and -0.32 V for 1Cl) and in C-O stretching frequencies of their carbonyl adducts, 1R-CO: nu(C-O) = 2080, 2086, 2088, and 2090 cm(-1) for R = NMe2, OMe, H, and Cl, respectively. However, within this range of electronic properties for 1R, dioxygen reactivity is significantly affected. The reaction of 1Cl or 1H with O2 at -78 degrees C in CH2Cl2 gives UV-vis and resonance Raman spectra indicative of a mu-eta2:eta2-(side-on)-peroxo dicopper(II) adduct (2R). Compound 1(OMe) reacts with O2, yielding equilibrium mixtures of side-on peroxo (2(OMe)) and bis(mu-oxo) (3(OMe)) species. Oxygenation of 1(NMe2) leads to the sole generation of the bis(mu-oxo) dicopper(III) complex (3(NMe2)). A solvent effect was also observed; in acetone or THF, increased ratios of bis(mu-oxo) relative to side-on peroxo complex are observed. Thus, the equilibrium between a dicopper side-on peroxo and bis(mu-oxo) species can be tuned by ligand design-specifically, more electron donating ligands favor the formation of the latter isomer, and the peroxo/bis(mu-oxo) equilibrium can be shifted from one extreme to the other within the same ligand system. Observations concerning the reactivity of the dioxygen adducts 2H and 3(NMe2) toward external substrates are also presented.     

Molecular precursors to gallium oxide thin films

The donor-functionalised alkoxides [Et(2)Ga(OR)](2)(R = CH(2)CH(2)NMe(2)(1), CH(CH(2)NMe(2))(2)(2), CH(2)CH(2)OMe (3), CH(CH(3))CH(2)NMe(2)(4), C(CH(3))(2)CH(2)OMe (5)) were synthesised by the 1:1 reaction of Et(3)Ga with ROH in hexane or dichloromethane at room temperature. Reaction of Et(3)Ga with excess ROH in refluxing toluene resulted in the isolation of a 1:1 mixture of [Et(2)Ga(OR)](2) and the ethylgallium bisalkoxide [EtGa(OR)(2)](R = CH(2)CH(2)NMe(2)(6) or CH(CH(3))CH(2)NMe(2)(7)). X-ray crystallography showed that compound 6 is monomeric and this complex represents the first structurally characterised monomeric gallium bisalkoxide. Homoleptic gallium trisalkoxides [Ga(OR)(3)](2) were prepared by the 1:6 reaction of [Ga(NMe(2))(3)](2) with ROH (R = CH(2)CH(2)NMe(2)(8), CH(CH(3))CH(2)NMe(2)(9), C(CH(3))(2)CH(2)OMe (10)). The decomposition of compounds 1, 4, 5 and 8 were studied by thermal gravimetric analysis. Low pressure CVD of 1 and 5 resulted in the formation of thin films of crystalline Ga(2)O(3).     

Hexaalkylguanidinium and 2-(dialkylamino)-1,3-dimethylimidazolinium trimethyldifluorosiliconates and perfluoroalkoxides. Accidental isolation and molecular structure of [C(NMe2)3]+F-*6CH2Cl2

Hexaalkylguanidinium and 2-(dialkylamino)-1,3-dimethylimidazolinium trimethyldifluorosiliconates, precursors for two stable hexaalkylguanidinium perfluoroalkoxides, were synthesized by treating commercially available bis(dialkylamino)difluoromethane derivatives with (dialkylamino)trimethylsilanes in aprotic media. With hexamethylguanidinium pentafluoroethoxide the introduction of the lipophilic and electronegative C2F5O group was straightforwardly achieved in the case of primary and secondary alkyl triflates to furnish the respective fluorinated ethers. The molecular structures of [(CH2NMe)2C(NEt2)]+[Me3SiF2]- and [C(NMe2)3]+F-*6CH2Cl2 were determined, showing in the latter case a fluoride anion octahedrally coordinated by six methylene chloride molecules via hydrogen bridges with a F...H distance of 205 pm (C...F distance 270.0(3) pm).     

Spontaneous formation of heteroligated PtII complexes with chelating hemilabile ligands

The spontaneous formation of the heteroligated complex [PtCl(kappa(2)-Ph(2)PCH(2)CH(2)SMe)(Ph(2)PCH(2)CH(2)SPh)]Cl (8 a) by a novel ligand rearrangement process has been observed. By using the weak-link approach, the relative arrangement of the alkyl and aryl groups can be controlled by abstraction of chloride from 8 a to form the closed complex [Pt(kappa(2)-Ph(2)PCH(2)CH(2)SMe)(kappa(2)-Ph(2)PCH(2)CH(2)SPh)][BF(4)](2) (5) and reopening using halide ions to form semi-open complexes [PtX(kappa(2)-Ph(2)PCH(2)CH(2)SMe)(Ph(2)PCH(2)CH(2)SPh)]BF(4) (8 b; X=Cl(-)) and (8 c; X=I(-)). Analogous procedures using Ph(2)PCH(2)CH(2)SMe and 1,4-(Ph(2)PCH(2)CH(2)S)(2)C(6)H(4) lead to heteroligated bimetallic complexes 7 and 9, illustrating that this ligand rearrangement process can be used as a tool for the assembly of complementary metallosupramolecular structures.     

Cyclodiphosphazanes with hemilabile ponytails: synthesis, transition metal chemistry (Ru(II), Rh(I), Pd(II), Pt(II)), and crystal and molecular structures of mononuclear (Pd(II), Rh(I)) and bi- and tetranuclear rhodium(I) complexes

Cyclodiphosphazanes having hemilabile ponytails such as cis-[(t)()BuNP(OC(6)H(4)OMe-o)](2) (2), cis-[(t)()BuNP(OCH(2)CH(2)OMe)](2) (3), cis-[(t)BuNP(OCH(2)CH(2)SMe)](2) (4), and cis-[(t)BuNP(OCH(2)CH(2)NMe(2))](2) (5) were synthesized by reacting cis-[(t)()BuNPCl](2) (1) with corresponding nucleophiles. The reaction of 2 with [M(COD)Cl(2)] afforded cis-[MCl(2)(2)(2)] derivatives (M = Pd (6), Pt (7)), whereas, with [Pd(NCPh)(2)Cl(2)], trans-[MCl(2)(2)(2)] (8) was obtained. The reaction of 2 with [Pd(PEt(3))Cl(2)](2), [{Ru(eta(6)-p-cymene)Cl(2)](2), and [M(COD)Cl](2) (M = Rh, Ir) afforded mononuclear complexes of Pd(II) (9), Ru(II) (11), Rh(I) (12), and Ir(I) (13) irrespective of the stoichiometry of the reactants and the reaction condition. In the above complexes the cyclodiphosphazane acts as a monodentate ligand. The reaction of 2 with [PdCl(eta(3)-C(3)H(5))](2) afforded binuclear complex [(PdCl(eta(3)-C(3)H(5)))(2){((t)BuNP(OC(6)H(4)OMe-o))(2)-kappaP}] (10). The reaction of ligand 3 with [Rh(CO)(2)Cl](2) in 1:1 ratio in CH(3)CN under reflux condition afforded tetranuclear rhodium(I) metallamacrocycle (14), whereas the ligands 4 and 5 afforded bischelated binuclear complexes 15 and 16, respectively. The crystal structures of 8, 9, 12, 14, and 16 are reported.     

Tripodal bis(imidazole) thioether copper(I) complexes: mimics of the Cu(M) site of copper hydroxylase enzymes

Tripodal bis(imidazole) thioether ligands, (N-methyl-4,5-diphenyl-2-imidazolyl)2C(OR)C(CH3)2SR' (BIT(OR,SR'); R = H, CH3; R' = CH3, C(CH3)3, C(C6H5)3), have been prepared, offering the same N2S donor atom set as the CuM binding site of the hydroxylase enzymes, dopamine beta hydroxylase and peptidylglycine hydroxylating monooxygenase. Isolable copper(I) complexes of the type [(BIT(OR,SMe))Cu(CO)]PF6 (3a and 3b) are produced in reactions of the respective tripodal ligands 1a (R = H) and 1b (R = Me) with [Cu(CH3CN)4]PF6 in CH2Cl2 under CO (1 atm); the pyramidal structure of 3a has been determined crystallographically. The infrared (IR) nu(CO)'s of 3a and 3b (L = CO) are comparable to those of the Cu(M)-carbonylated enzymes, indicating similar electronic character at the copper centers. The reaction of [(BIT(OH,SMe))Cu(CH3CN)]PF6 (2a) with dioxygen produces [(BIT(O,SOMe))2Cu2(DMF)2](PF6)2 (4), whose X-ray structure revealed the presence of bridging BIT-alkoxo ligands and terminal -SOMe groups. In contrast, oxygenation of 2b (R = Me) affords crystallographically defined [(BIT(OMe,SMe))2Cu2(mu-OH)2](OTf)2 (5), in which the copper centers are oxygenated without accompanying sulfur oxidation. Complex 5 in DMF is transformed into five-coordinate, mononuclear [CuII(BIT(OMe,SMe))(DMF)2](PF6)2 (6). The sterically hindered BIT(OR,SR') ligands 9 and 10 (R' = t-Bu; R = H, Me) and 11 and 12 (R' = CPh3; R = H, Me) were also prepared and examined for copper coordination/oxygenation. Oxygenation of copper(I) complex 13b derived from the BIT(OMe,SBu-t) ligand is slow, relative to 2b, producing a mixture of (BIT(OMe,SBu-t))2Cu2(mu-OH)2-type complexes 14b and 15b in which the -SBu-t group is uncoordinated; one of these complexes (15b) has been ortho-oxygenated on a neighboring aryl group according to the X-ray analysis and characterization of the free ligand. Oxygenation of the copper(I) complex derived from BIT(OMe,SCPh3) ligand 12 produces a novel dinuclear disulfide complex, [(BIT(OMe,S)2Cu2(mu-OH)2](PF6)2 (17), which is structurally characterized. Reactivity studies under anaerobic conditions in the presence of t-BuNC indicate that 17 is the result of copper(I)-induced detritylation followed by oxygenation of a highly reactive copper(I)-thiolate complex.     

1H NMR study of some substituted acyclic silaethanes, 2-silapropanes and 2-methyl-2-silapropanes and their rotameric populations around the Si?C bond

Three series of substituted silaalkanes, (i) SiH₃CH₂X, (ii) MeSiH₂CH₂X and (III) Me₂SiHCH₂X, have been prepared (X=Cl, Br, I, NMe₂, OMe, SMe), and the shifts and coupling constants extracted from their ¹H NMR spectra. Coefficients averaged over three rotameric states can be obtained from the first series which are used for the correction of coupling constants resulting from the presence of the electronegative substituents X. With the aid of the Karplus-Conroy angular dependence of the interproton coupling constants in silaethane? fragments, corrected for electronegative substitution, approximate rotameric populations in series ii and iii were obtained. Except for X=NMe₂, there is always a preference for a synclinal X/CH₃ relationship, even for sandwiched situations (series III).     

Ruthenium complexes of thiocinnamaldehydes: synthesis, structure, and [4+2]-cycloaddition reactions

Ruthenium hydrogensulfido complexes [CpRu(P-P)(SH)] ((P-P)=Ph(2)PCH(2)PPh(2) (dppm), Ph(2)PC(2)H(4)PPh(2) (dppe)) were obtained from the corresponding chloro complexes by Cl/SH exchange. Condensation with a range of cinnamaldehydes gave thiocinnamaldehyde complexes [CpRu(P-P)(S=CH-CR(2)=CHR(1))]PF(6) (R(1)=C(6)H(4)X, R(2)=H, Me, X=H, OMe, NMe(2), Cl, NO(2)) as highly-colored crystalline compounds. The thiocinnamaldehyde complexes undergo [4+2]-cycloaddition reactions with vinyl ethers CH(2)=CHOR(3) (R(3)=Et, Bu) and styrenes H(2)C=CHC(6)H(4)Y (Y=H, Me, OMe, Cl, Br, NO(2)) to give complexes of 2,4,5-trisubstituted 3,4-dihydro-2H-thiopyrans as mixtures of two diastereoisomers. The rate of addition of para-substituted styrenes H(2)C=CHC(6)H(4)Y to [CpRu(dppm)(S=CH-CH=CHPh)]PF(6) increases in the series Y=NO(2), Br, Cl, H, Me, OMe, indicating that the cycloaddition is dominated by the HOMO(dienophile)-LUMO(diene) interaction. The strained dienophiles norbornadiene and norbornene also add, giving ruthenium complexes of 3-thia-tricyclo[6.2.1.0(2,7)]undeca-4,9-dienes and 3-thia-tricyclo[6.2.1.0(2,7)]undec-4-enes, respectively. Addition reactions with acrolein, methacrolein, methyl vinyl ketone, acrylic ester, or ethyl propiolate finally yielded ruthenium complexes of 3,4-disubstituted 3,4-dihydro-2H-thiopyrans and 4H-thiopyrans, respectively.     

Asymmetric induction in methyl ketone aldol additions to alpha-alkoxy and alpha,beta-bisalkoxy aldehydes: a model for acyclic stereocontrol

A systematic study of methyl ketone aldol additions under nonchelating conditions with alpha-alkoxy and alpha,beta-bisalkoxy aldehydes is described. Additions to aldehydes containing a single alpha-alkoxy stereocenter generally provide the product diastereomers in accord with the Cornforth/polar Felkin-Anh models for carbonyl addition. Vicinal asymmetric induction is sensitive to the aldehyde alpha-alkyl substituent, but is relatively insensitive to the nature of the alkoxy protecting group. Aldehyde pi-facial selectivity in additions to substrates containing an additional beta-alkoxy-substituted stereocenter exhibits a striking dependence on the relative configuration of the alpha- and beta-stereocenters. Aldehydes with the alpha- and beta-alkoxy substituents in an anti relationship in most cases exhibit good diastereoselectivity, while aldehydes with the alpha- and beta-alkoxy substituents in a syn relationship unexpectedly give product mixtures. A stereochemical model based on Cornforth-like transition-state arrangements is proposed.     

Conformational analysis and assignments of relative stereocenter configurations in fluoroalkyl-iridium complexes using 19F[1H] HOESY experiments. Comparison with solid-state X-ray structural results

Solution conformations about the metal-carbon bond of the secondary fluoroalkyl ligands in iridium complexes [IrCp(PMe(3))(R(F))X] [Cp* = C(5)Me(5); R(F) = CF(CF(3))(2), X = I (1), CH(3) (2); R(F) = CF(CF(3))(CF(2)CF(3)), X = I (4), CH(3) (5)] have been determined using (19)F[(1)H] HOESY techniques. The molecules adopt the staggered conformation with the tertiary fluorine in the more hindered sector between the PMe(3) and X ligands, with CF(3) (and CF(2)CF(3)) substituents lying in the less hindered regions between PMe(3) and Cp or X and Cp. In molecules containing the CF(CF(3))(2) ligand, these conformations are identical to those adopted in the solid state. For compound 4, containing the CF(CF(3))(CF(2)CF(3)) ligand, two diastereomers are observed in solution. Solution conformations and relative stereocenter configuration assignments have been obtained using (19)F[(1)H] HOESY and correlated with the X-ray structure for the major diastereomer of 4, which has the (S(Ir), S(C)) or (R(Ir), R(C)) configuration. Relative stereocenter configurations of analogue 5, for which no suitable crystals could be obtained, were assigned using (19)F[(1)H] HOESY and proved to be different from 4, with 5 preferring the (S(Ir), R(C)) or (R(Ir), S(C)) configuration.     

Structural Aspects of Lithium Arenethiolate Complexes with Intramolecular Coordinating Amine Donors

Reaction of aryllithium reagents LiR (R = C(6)H(4)((R)-CH(Me)NMe(2))-2 (1a), C(6)H(3)(CH(2)NMe(2))(2)-2,6 (1b), C(6)H(4)(CH(2)N(Me)CH(2)CH(2)OMe)-2 (1c)) with 1 equiv of sulfur (1/8 S(8)) results in the quantitative formation of the corresponding lithium arenethiolates [Li{SC(6)H(4)((R)-CH(Me)NMe(2))-2}](6) (3), [Li{SC(6)H(3)(CH(2)NMe(2))(2)-2,6}](6) (4), and [Li{SC(6)H(4)(CH(2)N(Me)CH(2)CH(2)OMe)-2}](2) (5). Alternatively, 3 can be prepared by reacting the corresponding arenethiol HSC(6)H(4)((R)-CH(Me)NMe(2))-2 (2) with (n)BuLi. X-ray crystal structures of lithium arenethiolates 3 and 4, reported in abbreviated form, show them to have hexanuclear prismatic and hexanuclear planar structures, respectively, that are unprecedented in lithium thiolate chemistry. The lithium arenethiolate [Li{SC(6)H(4)(CH(2)N(Me)CH(2)CH(2)OMe)-2}](2) (5) is dimeric in the solid state and in solution, and crystals of 5 are monoclinic, space group P2(1)/c, with a = 17.7963(9) ?, b = 8.1281(7) ?, c = 17.1340(10) ?, beta = 108.288(5) degrees, Z = 4, and final R = 0.047 for 4051 reflections with F > 4sigma(F). Hexameric 4 reacts with 1 equiv of lithium iodide and 2 equiv of tetrahydrofuran to form the dinuclear adduct [Li(2)(SAr)(I)(THF)(2)] (6). Crystals of 6 are monoclinic, space group P2(1)/c, with a = 13.0346(10) ?, b = 11.523(3) ?, c = 16.127(3) ?, beta = 94.682(10) degrees, Z = 4, and final R = 0.059 for 3190 reflections with F > 4sigma(F).