Influences of Hard Donor on Cation Selectivities Closing to Soft Selenium Donor in Tweezer-like Calix[4]arene Receptors

Three novel 25,27-dihydroxy-26,28-bis(3-benzylselenopropoxy)-5,11,17,23-tetra-tert-butylcalix[4]-arene (2),25,27-dihydroxy-26,28-bis[3-(2-hydroxyethylseleno)propoxy]-5,11,17,23-tetra-tert-butyl-calix[4]arene (3) and 25,27-dihydroxy-26,28-bis(3-propylselenoproppxy)-5,11,17,23-tetra-tert-butyl-calix[4]arene (4) were synthesized for the comparison of their ion-selectivity in ion-selective electrodes (ISE). X-ray structure of the CH/π complex of 4.CH2Cl2 was elucidated. ISEs based on 2-4 as neutral ionophores were prepared, and their selectivity coefficients for Ag (logKAg,M^pot) were investigated against some main group metal ions and transition metal ones using the fixed interference method (FIM). These ISEs showed excellent Ag^ selectivity over most of the interfering cations examined. It is evident that the stronger Hg^2 interference may not be produced while hard donors (hydroxy) are close to the soft selenium donors.     

一对含有苯甲醛基修饰的杯芳烃异构体的晶体结构以及它们与铽离子配位的光物理性质

Two calix[4]arene isomers with benzaldehyde moieties, i.e., 5,11,17,23-tetra-tert-butyl-25,27-bis[2-(o-formyl-phenoxy)ethoxy]-26,28-dihydroxycalix[4]arene (3) and 5,11,17,23-tetra-tert-butyl-25,27-bis[2-(p-formylphenoxy)-ethoxy]-26,28-dihydroxycalix[4]arene (4), were synthesized according to a newly designed route in high yields, and their crystal structures have been determined by X-ray crystallographic study. The photophysical behavior on complexation of calix[4]arene derivatives 3 and 4 with terbium(Ⅲ) nitrate was investigated in anhydrous acetonitrile at 25℃ by UV-Vis and fluorescence spectroscopies. The crystallographic structure of 3 indicated that the eight oxygen atoms formed a preorganized ionophoric cavity due to intramolecular π-π stacking, which could encapsulate lanthanide ions tightly. In sharp contrast, the compound 4 formed a linear array by intermolecular π-π stacking, hence the oxygen atoms of pendant arms could not coordinate with metal ions, giving a poor binding ability to Tb^3 . The absorption spectra of 3 with Tb^3 showed clearly a new broad intense absorption at 385nm. Interestingly, the narrow emission line spectrum has also been observed for compound 3 with Tb^3 , and the results obtained were discussed from the viewpoint of energy transfer mechanism between host structures and the properties of lanthanide ions.     

Synthesis of a Tweezer—like Bis（Phenylthiapropoxy）calix[4]—arene as a Cation／π Enhanced Sensor for Ion—Selective Electrodes

Two novel 25,27-dihydroxy-26,28-bis(3-phenylthiapropxy)-calix[4]arene(3) and 25,27-dihydroxy-26,28-bis(3-phenylthiapropoxy)-5,11,17,23-tetra-tert-butylcalix[4] arene (4) were synthesized for the evaluation of their ion-selectivity in ion-selective electrodes(ISEs).ISEs based on 3 and 4 as neutral ionophores were prepared,and their selectivity coefficients for Ag^ (lg KAg,M^pot)were investigated against other alkali metal,alkaline-earth metal,aluminum,thallium(Ⅰ）,Lead and some transition metal ions using the separate solution method (SSM).These ISEs showed excellent Ag^ seletivity over most of the interfering cations examined,except for Hg^2 and Fe^2 having relative smaller interference(lg KAg,M^pot≤-2.1).     

含氮手性杯[4]芳烃对羧酸的手性识别

Chiral nitrogen-containing calix[4]arene was easily synthesized by the reaction of 25,27-di（2-bromoethoxy）- 26,28-dihydroxy-5,11,17,23-tetrakis（t-butyl）calix[4]arene with S-（-）-1-phenylethylamine in excellent yield, and showed good ability to recognize the enantiomers of mandelic acid and 2,3-dibenzoyltartaric acid. This finding has potential application to assay and separation of enantiomers of the carboxylic acids.     

硫、硒杯[4]芳烃萃取银

以5,11,17,23-四（1,1-二甲基乙基）-25,27-二羟基-26,28-二[（2-乙基硫）乙氧基]杯[4]芳烃（1）和5,11,17,23-四（1,1-二甲基乙基）-25,27-二羟-26,28-二[（2-乙基硒）]乙氧基杯[4]芳烃（2）为萃取剂,研究了在弱酸性条件下杯芳烃衍生物与银的络合行为。杯芳烃衍生物与银形成1：1萃取络合物,在大量碱金属、碱土金属、常见过渡金属离子存在下,对银离子有很高的萃取率和选择性。     

Interaction and Interfacial Molecular Recognition of Calix[4] arene Derivatives Bearing Nucleobases for Complementary Nucleoside

The p-tert-butyl calix[4] arene derivatives la with uracils and 1b with adenines at the lower rim were synthesized.The Interaction between 1a and 1b in CDCl3 solution was demonstrated by ^1H NMR spectra.The interfacial molecular recognitions of la and 1b for the complementary nucleosides in aqueous subphases were investigated by Langmuir-Blodgett technique.     

Synthesis of Pyridylazo-substituted Chromogenic Calix[4]arenes

Calixarenes are a versatile class of macrocyclic compounds which have attracted extensive interest due to their ability to form host-guest complexes and act as enzyme mimic, especially when appropriately functionalized1. Introduction of azo group to calixarenes can make the later to be easily detected in the process of molecular recognition, azo groups have been introduced into calixarenes by the diazo-coupling reaction of calix[4]arene with BF4- or chloride salt of substituted benzene diazon…     

Syntheses of Chiral Calix [4] arene Derivatives Bearing Amino Acid Residue

The syntheses of chirai calix[4]arene derivatives bearing amino acid residue at the lower rim or upper rim by three different methods were reported.     

Hybrid vesicles of pillar[5]arene/silica: Host-guest complexation and application in pH-triggered release

Integrating silica with organic nanoparticles can generate unique properties.Here pillar[5]arene/silica hybrid vesicles were constructed based on the amphiphilic and rigid properties of pillararenes,as well as the catalytic hydrolysis of tetraethoxysilane.Such vesicles exhibited the high strength of silica and unique molecular recognition of pillararenes,both of which could tune the pH-trigge red release behavior.Furthermore,a rhodamine B derivative with hexyl group(RhB-C6) was synthesized,which can form a complex with the pillar[5]arene.Based on the host-guest interaction and high strength of silica,the hybrid vesicles could load more RhB-C6 and the rhodamine B was released more slowly compared with the organic vesicles.     

Studies on Properties of p—Nitrophenylazo Calix[4]arene Derivatives

The p-nitrophenylazo calix[4] arene derivatives la-ld with nonlinear optical(NLO)properties were prepared by the diazo-coupling reaction of calix[4]arene with p-nitrophenyl diazonium.The diazotization reaction of p-nltroaniline was caried out with isoamyl nitrite as a source of nitrous acid in EtONa/EtOH under refluxing conditon.X-Ray crystallographic analysis and ^1H NMR sptectra reveal that they exist as cone conformation in crystal state or in soution.HRS measurements at 1064 nm in THF indicate that p-nitrophenylazo calix[4]arenes have higher hyperpolarizability βz values than the corresponding reference compound 4-(4-nitrophenylazo)-2,6-dimethyl-phenol,without red shift of the charge transfer band.The tetrakis p-nitropheylazo calix[4]arene(2)with longer alkyl chains can form monolayer aht the air/water interface.     

Synthesis of Flavin–Calix[4]arene Conjugate Derivatives

The synthesis of two new flavin substituted calix[4]arene derivatives, 9 and 10 , is described. The first flavin substituted calix[4]arene derivative 9 was synthesized by the reaction of 3‐methylalloxazine ( 5 ) with 25,27‐bis(3‐bromopropoxy)‐26,28‐dihydroxy‐5,11,17,23‐tetra(tert‐butyl)calix[4]arene ( 4 ) in high yield (92%). The other derivative 10 was prepared from 3‐methylalloxazine‐1‐acetic acid ( 7 ) and 25,27‐bis(3‐cyanopropoxy)calix[4]arene ( 3 ). All new compounds were characterized by a combination of FT‐IR and ¹H‐NMR spectroscopy, and elemental‐analysis techniques.     

Electrochemical Properties of Electrode Modified with Langmuir‐Blodgett Film of p‐tert‐Butylcalix[4]arene Derivatives and Its Application in Determining of Silver

A new type of voltammetric sensor, Langmuir‐Blodgett (LB) film of 5,11,17,23‐tetra‐tert‐butyl‐25,27‐di(3‐thiadiazole‐propanoxy)‐26,28‐dihydroxycalix[4]arene modified glassy carbon electrode (LB_TZCA–GCE), was prepared. The electrochemical properties of LB_TZCA–GCE were researched in detail and its recognizing mechanism for silver ion in aqueous solution was discussed. Using this voltammetric sensor, a new stripping voltammetric method for determining of Ag⁺ was erected with good sensitivity, selectivity, reproducibility and recovery. The detection limit was 8×10^?9 M at accumulation time of 180 s. By this method, real samples (lake water, tap water and synthesis sample) were analyzed and the results obtained were well satisfactory.     

Synthesis and Rh(I)‐catalyzed polymerization of 1,3‐diphenylyne–calix[4]arene compounds: Novel conjugated,calixarene‐based polymers

The synthesis of two 1,3‐bis(4‐ethynylbenzyloxy)calix[4]arenes, 5,11,17,23‐tetrakis(1,1‐dimethylethyl)‐25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene ( 1 ) and 25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene ( 2 ), was accomplished through Sonogashira coupling of appropriate calixarene derivatives. Methods for the polymerization of these bifunctional building blocks with Rh(I) as a catalyst, leading ultimately to conjugated polymers having calix[4]arene units incorporated into the main chain, were explored. Calixarenes 1 and 2 were efficiently polymerized with rhodium‐based initiators and afforded the conjugated polymers poly{5,11,17,23‐tetrakis(1,1‐dimethylethyl)‐25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene} ( poly 1 ) and poly{25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene}. Depending on the conditions, high conversions and good yields were obtained. The effects of adding cocatalysts (NHEt₂ and/or PPh₃) were studied in connection with the number‐average molecular weight and the molecular weight distribution of the resultant polymer ( poly 1 ) and tentatively correlated with the formation of low‐molecular‐weight materials. A catalytic system containing triphenylphosphine as the sole additive ([Rh(nbd)Cl]₂; [Rh]/[PPh₃] = 0.5) proved to be the best for the polymerization of p‐tert‐butylcalixarene compound 1 . Linear polymers having high number‐average molecular weights (up to 1.1 × 10⁵ g mol^?1) with low polydispersities were produced under these conditions. For debutylated homologue 2 , its polymerization was best carried out in the absence of any added cocatalyst. A cyclopolymerization route, comprising the intramolecular ring closing of the calix[4]arene pendant ethynyl groups followed by an intermolecular propagation step, is advanced to explain the results. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 7054–7070, 2006     

Alkali Metal Complexation. Binding Properties of cone and partial-cone Calix[4]arenes Bearing a Mixed (O 2 , O 2 ') Donor Set (O = Phosphine Oxide; O ' = Amide or Ester)

The stability constants of alkali metal complexes obtained from the followingO-substituted calix[4]arenes were determined by UV/Vis spectroscopy inmethanol at 20°C: 5,11,17,23-tetra-tert-butyl-25,27-bis(diethylcarbamoylmethoxy)-26,28-bis(diphenylphosphinoylmethoxy)calix[4]arene(cone-1), 25,27-syn-26,28-anti-5,11,17,23-tetra-tert-butyl-25,27-bis(diethylcarbamoylmethoxy)-26,28-bis(diphenylphosphinoylmethoxy)calix[4]arene (paco-1),5,11,17,23-tetra-tert-butyl-25,27-diethoxycarbonylmethoxy-26,28-bis(diphenylphosphinoylmethoxy)calix[4]arene(cone-2) and25,27-syn-26,28-anti-5,11,17,23-tetra-tert-butyl-25,27-diethoxycarbonylmethoxy-26,28-bis(diphenylphosphinoylmethoxy)calix[4]arene(paco-2). All ligands form 1:1 complexes with alkali metal cations. The amide-containing calixarenes were found to be more efficient for alkali metalcomplexation than those bearing ester substituents. While sodium ions are selectivelycomplexed by the two mixed amide-(phosphine oxide) calixarenes, the twoester-containing isomers cone-2 and paco-2 turned out to be selective towards potassium and rubidium ions, respectively. With allfour ligands the lowest stability constants were found for the lithium andcesium ions.     

Liquid chromatographic behavior of two alanine‐substituted calix[4]arene‐bonded silica gel stationary phases

Two new kinds of alanine‐substituted calix[4]arene stationary phases of 5,11,17,23‐p‐tert‐butyl‐25,27‐bis(l ‐alanine‐methylester‐N‐carbonyl‐methoxy)‐26,28‐dihyroxycalix[4]arene‐bonded silica gel stationary phase (BABS4) and 5, 11, 17, 23‐p‐tert‐butyl‐25,26,27,28‐tetra(l ‐alanine‐methylester‐N‐carbonyl‐methoxy)‐calix[4]arene‐bonded silica gel stationary phase (TABS4) were prepared and characterized in the present study. They were compared with each other and investigated in terms of their chromatographic performance by using polycyclic aromatic hydrocarbons, disubstituted benzene isomers, and mono‐substituted benzenes as solute probes. The results indicated that both BABS4 and TABS4 exhibited multiple interactions with analytes. In addition, the commonly used Tanaka characterization protocol for the evaluation of commercially available stationary phases was applied to evaluate the properties of these two new functionalized calixarene stationary phases. The Tanaka test results were compared with Zorbax Eclipse XDB C₁₈ and Kromasil phenyl columns, respectively. BABS4 has stronger hydrogen‐bonding capacity and ion‐exchange capacity than TABS4, and features weaker hydrophobicity and hydrophobic selectivity. Both of them behave similarly in stereoselectivity. Both BABS4 and TABS4 are weaker than C₁₈ and phenyl stationary phases in hydrophobicity and hydrophobic selectivity.     

Oligomeric calix[4]arene‐thiacrown ether for toxic heavy metals

A new oligomeric calix[4]arene‐thiacrown‐4 ( 5 ) was synthesized via a condensation reaction of 5,11,17,23‐tetra‐tert‐butyl‐25,27‐bis‐(4‐aminobenzyloxy)‐calix[4]arene‐thiacrown‐4 ( 4 ) with adipoyl dichloride. In this oligomerization reaction only five/six calix[4]arene‐thiacrown‐4 units were linked in the oligomeric chain. The complexation studies of 5 were made with liquid–liquid‐ extraction and solid–liquid‐sorption procedures. For comparison, the extraction efficiencies of monomers 1 , 3 , and 4 to selected transition metals are reported. The selectivity of monomers 3 and 4 toward Cu²⁺, Hg²⁺, and Pb²⁺ was lost after oligomerization in the two‐phase extraction systems. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 186–193, 2004     

Two related lithium calixarene complexes, [p‐tert‐butylcalix[4]arene(OMe)(OH)2(OLi)]2·4MeCN and {p‐tert‐butylcalix[4]arene(OH)2(OLi)[OLi(NCMe)2]}2·8MeCN,determined using synchrotron radiation

The crystal structures of acetonitrile solvates of two related lithium calixarene complexes have been determined by low‐temperature single‐crystal X‐ray diffraction using synchrotron radiation. Bis(μ‐5,11,17,23‐tetra‐tert‐butyl‐26,28‐dihydroxy‐25‐methoxy‐27‐oxidocalix[4]arene)dilithium(I) acetonitrile tetrasolvate, [Li₂(C₄₅H₅₇O₄)₂]·4C₂H₃N or [p‐tert‐butylcalix[4]arene(OMe)(OH)₂(OLi)]₂·4MeCN, (I), crystallizes with the complex across a centre of symmetry and with four molecules of unbound acetonitrile of crystallization per complex. Tetraacetonitrilebis(μ‐5,11,17,23‐tetra‐tert‐butyl‐26,28‐dihydroxy‐25,27‐dioxidocalix[4]arene)tetralithium(I) acetonitrile octasolvate, [Li₄(C₄₄H₅₄O₄)₂(C₂H₃N)₄]·8C₂H₃N or {p‐tert‐butylcalix[4]arene(OH)₂(OLi)[OLi(NCMe)₂]}₂·8MeCN, (II), also crystallizes with the complex lying across a centre of symmetry and contains eight molecules of unbound acetonitrile per complex plus four more directly bound to two of the lithium ions, two on each ion. The cores of both complexes are partially supported by O—H...O hydrogen bonds. The methoxy methyl groups in (I) prevent the binding of any more than two Li⁺ ions, while the corresponding two O‐atom sites in (II) bind an extra Li⁺ ion each, making four in total. The calixarene cone adopts an undistorted cone conformation in (I), but an elliptical one in (II).