Surface modification of polymers. II. Grafting with glycidyl acrylates and the reactions of the grafted surfaces with amines

The surface of low density polyethylene has been grafted with glycidyl acrylate and glycidyl methacrylate by photoinitiation. ESCA measurements on the grafted surface showed a 72% coverage for glycidyl acrylate and 52% for glycidyl methacrylate after 10 min of grafting with UV irradiation. ATR–IR showed a 10 times more extensive grafting for glycidyl acrylate than for glycidyl methacrylate after 10 min of grafting, indicating reaction to deeper layers. Acetone and ethanol were used as solvents: acetone yielded slightly more grafting at the surface. The grafted surfaces were reacted with 2M solutions of aniline and propylamine in ethanol. After 4 h reaction at 60°C, with aniline 52% of the epoxy groups while for propylamine 96% of the groups were consumed, as measured with ATR–IR.     

Surface modification of polymers. III. Grafting of stabilizers onto polymer films

Polypropylene, polystyrene, and polyethylene have been grafted with glycidyl acrylate and glycidyl methacrylate. After 5 min of grafting with UV irradiation, polystyrene was extensively grafted to 91% coverage of glycidyl acrylate according to ESCA, while polypropylene was grafted to only 50% coverage. With glycidyl acrylate the grafting depth is estimated to be 0.1 μm for PP and 0.23 μm for PS. Glycidyl methacrylate is grafted in a thinner layer than glycidyl acrylate. The stabilizers 2,4-dihydroxybenzophenone, phenyl 4-aminosalicylate, and 4-amino-2,2,6,6-tetramethylpiperidine were attached to LDPE surfaces containing grafted glycidyl acrylate by opening of the epoxide bond. The reaction between epoxide and stabilizer is diffusion controlled at high concentrations of stabilizer. UV spectroscopy on an LDPE film grafted and reacted with 2,4-dihydroxybenzophenone showed that 227 nmol stabilizer/cm² was bound to the surface.     

Mechanism of cationic polymerization of glycidic esters

The kinetics of cationic polymerization of glycidyl esters (glycidyl acetate, glycidyl benzoate, glycidyl naphthoate) were studied. The kinetic parameters of this process were determined. It was shown that the rate of polymerization is anomalously dependent on the polarity of the medium. The existence of an internal complexation and an equilibrium between two types of active centers, determining the rate of the process, has been suggested.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 21, No. 6, pp. 722–726, November–December, 1985.     

Cleavage of different ether bonds in butyl glycidyl ether and allyl glycidyl ether by K, K(15-crown-5)2

The kind of substituent in alkyl glycidyl ethers affects the course of their reaction with K⁻, K⁺(15-crown-5)₂. The cyclic oxirane ring is exclusively cleaved in the case of butyl glycidyl ether whereas the presence of the unsaturated allyl group in the glycidyl ether molecule unexpectedly prefers the scission of the linear ether bond. In both the systems organometallic intermediates are formed. They react with crown ether causing its ring opening. Allylpotassium formed from allyl glycidyl ether reacts also with another glycidyl ether molecule; the oxirane ring is opened in this case.     

Surface molecularly imprinted magnetic microspheres for the recognition of albumin

A new approach, combining metal coordination with the molecular imprinting technique, was developed to prepare affinity materials. Magnetic poly(glycidyl methacrylate) microspheres in monosize form were used for specific recognition toward the target protein. The magnetic poly(glycidyl methacrylate) microspheres were prepared by dispersion polymerization in the presence of magnetite nanopowder. Surface imprinted magnetic poly(glycidyl methacrylate) microspheres based on metal coordination were prepared and used for the selective recognition of human serum albumin. Iminodiacetic acid was used as the metal coordinating agent and human serum albumin was anchored by Cu²⁺ ions on the surface of magnetic poly(glycidyl methacrylate) microspheres by metal coordination. The magnetic poly(glycidyl methacrylate) microspheres were coated with a polymer formed by condensation of tetraethyl orthosilicate and 3‐aminopropyltrimethoxysilane. The human serum albumin imprinted magnetic poly(glycidyl methacrylate) microspheres were characterized by scanning electron microscopy, attenuated total reflectance Fourier transform infrared spectroscopy and particle size analysis. The maximum adsorption capacity of human serum albumin imprinted magnetic poly(glycidyl methacrylate) microspheres was 37.7 mg/g polymer at pH 6.0. The selectivity experiments of human serum albumin imprinted magnetic poly(glycidyl methacrylate) microspheres prepared with different concentrations in the presence of lysozyme, bovine serum albumin and cytochrome C were performed in order to determine the relative selectivity coefficients.     

New methacrylate-containing derivatives of hydroxyethyl starch

Modification of hydroxyethyl starch with glycidyl methacrylate in dimethylsulfoxide medium has resulted in the formation of the derivatives containing double C=C bonds capable of producing biocompatible hydrogels via the free-radical cross-linking. Structure of the glycidyl methacrylate derivatives has been elucidated by means of IR, UV, and NMR spectroscopy. Branching of the hydroxyethyl starch chains in the course of the interaction with glycidyl methacrylate has been observed and interpreted; the branching density has been determined. The influence of the substitution degree of the glycidyl methacrylate derivatives of hydroxyethyl starch on its melting point has been demonstrated.     

Chemisorption of Glycidyl Spacer on Magnetic Nanoparticles and Immobilization of Albumin and Quinacrine

Chemisorption of a glycidyl spacer on the surface of magnetic nanoparticles from three solvents has been performed. It has been shown that the chemisorption from benzene is the most efficient. Human albumin and quinacrine as a model pharmaceutical have been immobilized via a glycidyl spacer. A mechanism of the interaction of albumin and quinacrine with glycidyl groups has been suggested.     

Effect of the Structure and Content of Carbazolyl-Containing Co-oligomers on the Diffraction Efficiency of Holographic Recording Media

Theoretical and Experimental Chemistry - We have established that as the content of glycidyl carbazolyl fragments increases in their copolymers with α-naphthyl glycidyl ether, the...     

Synthesis and Polymerization Studies of Cyano Epoxides

Abstract

The polar epoxides β-cyanoethyl glycidyl ether, cyanomethyl glycidyl ether, β-chloro-β-cyanoethyl glycidyl ether, and 3,4-epoxy valeronitrile were prepared, characterized, and their polymerization reactions studied. Novel cyanoethyla-tion of glycidol produced the β-cyanoethyl glycidyl ether in a quantitative yield. Reported is the first practicable synthesis of epicyanohydrin, which failed to polymerize. Homo-, co-, and terpolymerizations of the polar β-epoxy nitriles with various alkylene oxides were achieved by employing a complex catalyst obtained from an aluminum alkyl, acetyl acetone, and water. The polymers produced a series of vulcanizable elastomers which displayed an ex-cellent balance of solvent resistance and low temperature flexibility, as well as good ozone resistance. The presence of a third monomer such as allyl glycidyl ether was required to facilitate rubber vulcanization. However, it was possible to vulcanize homo- and copolymers of β-chloro-βyanoethyl glycidyl ether through the pendant chlorine atom. Catalyst efficiency in all cases was poor due to the complexing of the aluminum catalyst by the nitrile function.     

Selective cleavage of the linear ether bond in benzyl glycidyl ether and triphenylmethyl glycidyl ether by potassium alkalide as two-electron-transfer reagent

The linear ether bond was exclusively cleaved in benzyl glycidyl ether and triphenylmethyl glycidyl ether under the influence of K⁻, K⁺(15-crown-5)₂ (1), whereas the strongly strained three-membered oxacyclic ring remained undisturbed. Potassium glycidoxide and benzylpotassium were found as the primary reaction products of benzyl glycidyl ether with 1. Subsequently, benzylpotassium reacted with benzyl glycidyl ether giving the next potassium glycidoxide molecule and bibenzyl. Benzyl phenyl ether was used as a model compound to explain the mechanism of bibenzyl formation. The reaction of triphenylmethyl glycidyl ether with 1 resulted in potassium glycidoxide and stable triphenylmethylpotassium. After treating with a quenching agent a new glycidyl ether or glycidyl ester was obtained from potassium glycidoxide. These results were found when the reaction occurred at the excess of glycidyl ether. In another case, i.e. at the excess of 1 further reactions took place with the participation of potassium anions and various new compounds were observed in the reaction mixture after benzylation or methylation. Thus, the method of substrates delivery influences the course of studied processes in a decisive way.     

Synthesis and characterization of spherical and hemispherical polyepoxide micrometer‐sized particles of narrow size distribution by a single‐step swelling of uniform polystyrene template microspheres with glycidyl methacrylate

Polystyrene template microspheres of narrow size distribution were prepared by dispersion polymerization of styrene in a mixture of ethanol and 2‐methoxy ethanol. Spherical and hemispherical polystyrene/poly(glycidyl methacrylate) microspheres of narrow size distribution were prepared by a single‐step swelling of the polystyrene template microspheres with the swelling solvent monomer glycidyl methacylate, followed by polymerization of the monomer within the swollen template microspheres at 73 °C. Uniform polystyrene/poly(glycidyl methacylate‐ethylene glycol dimethacrylate) polyepoxide composite microspheres were synthesized similarly, substituting glycidyl methacylate for glycidyl methacylate and ethylene glycol dimethacrylate. Uniform crosslinked poly(glycidyl methacylate‐ethylene glycol dimethacrylate) polyepoxide microspheres have been prepared by dissolution of the PS template polymer of the former composite microspheres. Particles with different properties, for example size, size distribution, shape, surface morphology, surface area, and so forth, were prepared by changing various parameters belonging to the swelling and/or polymerization steps, for example, volume of the swelling monomer/s and/or the swelling solvent dibutyl phthalate. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4612–4622, 2007     

Hydrosilylation of allyl glycidyl ether with triethoxysilane

Hydrosilylation of allyl glycidyl ether with triethoxysilane in presence of Speier’s catalyst leads to triethoxy(3-glycidoxypropyl)silane and triethoxy(2-glycidoxy-1-methylethyl)silane and is accompanied by isomerization of allyl glycidyl ether and cleavage of the oxirane ring and the ether bond. An effect of admixtures in allyl glycidyl ether on the process is revealed. Some other hydrosilylation catalysts and additives to Speier’s catalyst are studied     

Improving Damping Properties and Thermal Stability of Epoxy/Polyurethane Grafted Copolymer by Adding Glycidyl POSS

Modified castor oil-based epoxy resin (EP)/polyurethane (PU) grafted copolymer by glycidyl polyhedral oligomeric silsesquioxane (glycidyl POSS) was synthesized. The damping properties, thermal stability, mechanical properties and morphology of the grafted copolymer modified by glycidyl POSS were studied systematically. The results revealed that the incorporation of glycidyl POSS improved the damping performance evidently and broadened damping temperature range, especially when the glycidyl POSS content was0.2%–1%. At the same time, there was a slight increase in thermal stability with the increase of POSS content. The tensile properties changed with the change of the copolymer's Tg, decreased at low POSS contents and increased at high POSS contents. This modified copolymer has the potential to be used as film damping material or constrained damping layer.     

Grafting of poly(glycidyl methacrylate) onto alginic acid

Grafting of poly(glycidyl methacrylate) (PGMA) onto alginic acid was carried out using ceric ammonium nitrate as initiator, using various concentrations of monomer and initiator, and various temperatures and times. Percentage grafting, grafting efficiency and rates of polymerization, graft copolymerization and homopolymerization were evaluated in all cases. Infrared spectra for pure alginic acid, poly(glycidyl methacrylate) and the alginic acid-poly(glycidyl methacrylate) were taken to establish the occurrence of grafting. Differential scanning calorimetry was carried out for alginic acid, poly(glycidyl methacrylate), the graft copolymer and the physical mixture to establish evidence for grafting.     

Kinetics of the Polymerization of Ethyl Glycidil Ether and Allyl Glycidil Ether with BF3OEt2

The kinetics of the polymerization of ethyl glycidyl ether and allyl glycidyl ether with BF₃OEt₂ as catalyst has been studied. Chain transfer to the monomer has been evidenced. It increased with the monomer concentration and decreased with the increase of the dielectric constant of the solvent used and decreased in the presence of a monomer more basic than glycidyl ethers, for example, 1,3-dioxepane.     

Anionic alternating copolymerization of 3,4‐dihydrocoumarin and glycidyl ethers: A new approach to polyester synthesis

Anionic copolymerizations of 3,4‐dihydrocoumarin (DHCM) and a series of glycidyl ethers (n‐butyl glycidyl ether, tert‐butyl glycidyl ether, and allyl glycidyl ether) with 2‐ethyl‐4‐methylimidazole as an initiator proceeded in a 1:1 alternating manner to give the corresponding polyesters, whose structures were confirmed by spectroscopic analyses and reductive scission of the ester bonds in the main chain with lithium aluminum hydride, followed by detailed analyses of the resulting fragments. The polyester obtained by the copolymerization of DHCM and allyl glycidyl ether inherited the allyl groups in the side chain, whose applicability to chemical modifications of the polyester was successfully demonstrated by a platinum‐catalyzed hydrosilylation reaction. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4092–4102, 2008     

聚(β-氯乙基缩水甘油醚)的合成及其酯化反应动力学

本文合成了β-氯乙基缩水甘油醚及其聚合物。结果表明, AlEt3-0.5H2O体系是β-氯乙基缩水甘油醚的一种有效的聚合引发剂。研究了聚(β-氯乙基缩水甘油醚)的酯化反应动力学, 并通过^1H NMR和IR光谱确立了酯化度的计算关系式。最后, 通过光交联的动力学研究发现, 酯化聚合物中的肉桂酰基含量为85%时, 材料的感光灵敏度最高。     

季铵化N,O-(2-羧乙基)壳聚糖的制备及其抑菌性能

以缩水甘油基三甲基氯化铵(GTMA)、缩水甘油基三乙基氯化铵(GTEA)、缩水甘油基三丙基氯化铵(GTPA)、缩水甘油基三丁基氯化铵(GTBA)和缩水甘油基二甲基苄基氯化铵(GDMBA)等活性季铵盐为季铵化试剂,对N,O-2-羧乙基壳聚糖(N,O-2-CEC)进行了化学改性,得到了系列季铵化N,O-2-CEC(QCEC...     

Microcalorimetry combined with chemometics for antibacterial evaluation of Sophora alopecuroides on Staphylococcus aureus

Journal of Thermal Analysis and Calorimetry - As a kind of energetic plasticizer, ester-terminated glycidyl azide polymer (GAPE) has a potential for being mixed with energetic binder glycidyl azide...     

Microwave‐assisted extraction for the simultaneous determination of Novolac glycidyl ethers,bisphenol A diglycidyl ether,and its derivatives in canned food using HPLC with fluorescence detection

A microwave‐assisted extraction (MAE) protocol and an efficient HPLC analysis method were first developed for the fast extraction and simultaneous determination of bisphenol F diglycidyl ether (Novolac glycidyl ether 2‐Ring), Novolac glycidyl ether 3‐Ring, Novolac glycidyl ether 4‐Ring, Novolac glycidyl ether 5‐Ring, Novolac glycidyl ether 6‐Ring, bisphenol A diglycidyl ether, bisphenol A (2,3‐dihydroxypropyl) glycidyl ether, bisphenol A (3‐chloro‐2‐hydroxypropyl) glycidyl ether, bisphenol A bis(3‐chloro‐2‐hydroxypropyl) ether, bisphenol A (3‐chloro‐2‐hydroxypropyl) (2,3‐dihydroxypropyl) ether in canned fish and meat. After being optimized in terms of solvents, microwave power and irradiation time, MAE was selected to carry out the extraction of ten target compounds. Analytes were purified by poly(styrene‐co‐divinylbenzene) SPE columns and determinated by HPLC‐fluorescence detection. LOD varied from 0.79 to 3.77 ng/g for different target compounds based on S/N=3; LOQ were from 2.75 to 10.92 ng/g; the RSD for repeatability were <8.64%. The analytical recoveries ranged from 70.46 to 103.44%. This proposed method was successfully applied to 16 canned fish and meat, and the results acquired were in good accordance with the studies reported. Compared with the conventional liquid–liquid extraction and ultrasonic extraction, the optimized MAE approach gained the higher extraction efficiency (20–50% improved).