Sweeping and new on-line sample preconcentration techniques in capillary electrophoresis

Sweeping is a powerful on-line sample preconcentration technique that improves the concentration sensitivity of capillary electrophoresis (CE). This approach is designed to focus the analyte into narrow bands within the capillary, thereby increasing the sample volume that can be injected, without any loss of CE efficiency. It utilizes the interactions between an additive [i.e., a pseudostationary phase (PS) or complexing agent] in the separation buffer and the sample in a matrix that is devoid of the additive used. The accumulation occurs due to chromatographic partitioning, complexation or any interaction between analytes and the additive through electrophoresis. The extent of the preconcentration is dependent on the strength of interaction involved. Both charged and neutral analytes can be preconcentrated. Remarkable improvements—up to several thousandfold—in detection sensitivity have been achieved. This suggests that sweeping is a superior and general approach to on-line sample preconcentration in CE. The focusing mechanism of sweeping under different experimental conditions and its combination with other on-line preconcentration techniques are discussed in this review. The recently introduced techniques of transient trapping (tr-trapping) and analyte focusing by micelle collapse (AFMC) as well as other novel approaches to on-line sample preconcentration are also described.

Micelle to solvent stacking of organic cations in micellar electrokinetic chromatography with sodium dodecyl sulfate

The on-line sample concentration technique, micelle to solvent stacking (MSS), was studied for small organic cations (quaternary ammonium herbicides, β-blocker drugs, and tricyclic antidepressant drugs) in reversed migration micellar electrokinetic chromatography. Electrokinetic chromatography was carried out in fused silica capillaries with a background solution of sodium dodecyl sulfate (SDS) in a low pH phosphate buffer. MSS was performed using anionic SDS micelles in the sample solution for analyte transport and methanol or acetonitrile as organic solvent in the background solution for analyte effective electrophoretic mobility reversal. The solvent also allowed for the separation of the analyte test mixtures. A model for focusing and separation was developed and the mobility reversal that involved micelle collapse was experimentally verified. The effect of analyte retention factor was observed by changing the % organic solvent in the background solution or the concentration of SDS in the sample matrix. With an injection length of 31.9 cm (77% of effective capillary length) for the 7 test drugs, the LODs (S/N=3) of 5-14 ng/mL were 101-346-fold better when compared to typical injection. The linearity (R(2), range=0.025-0.8 μg/mL), intraday and interday repeatability (%RSD, n=10) were ≥0.988, <6.0% and <8.5%, respectively. In addition, analysis of spiked urine samples after 10-fold dilution with the sample matrix yielded LODs=0.02-0.10 μg/mL. These LODs are comparable to published electrophoretic methods that required off-line sample concentration. However, the practicality of the technique for more complex samples will rely on dedicated sample preparation schemes.     

Analysis of ecdysteroids by micellar electrokinetic chromatography with on-line preconcentration

In order to enhance the UV detection sensitivity, an application study of an on-line preconcentration technique for micellar electrokinetic chromatographic (MEKC) was carried out. The simultaneous determination of four test ecdysteroids, 20-hydroxyecdysone, ajugasterone C, polypodine B and ponasterone A has been investigated by using the normal stacking mode in MEKC with UV detection. The effects of anionic surfactant composition and concentration, the applied voltage, the pH buffer, the kind and the amount of organic solvent and the injection time on the analyte resolution were evaluated. The optimised conditions for the separation involved the use of a 50 mM borate as the running buffer containing 50 mM of a mixture of sodium dodecyl sulphate (SDS) and sodium cholate (SC) in the ratio of 1:1 together with a concentration of 10% (v/v) of 2-PrOH at pH 9.0. Hydrodynamic injection of 12 s at 50 mbar and separation voltage of 20 kV at temperature of 20 degrees C were employed. These conditions allowed a repeatability separation within 21 min. Concentration detection limit for the neutral analytes studied improve about an order of magnitude. The method was also applied to the determination of ecdysteroids in a real sample.     

Graphene nanoparticles as pseudostationary phase for the electrokinetic separation of nonsteroidal anti‐inflammatory drugs

The exceptional properties of graphene (G) were exploited here to facilitate capillary electrokinetic separations. Two types of commercially available G consisting of nanoparticles containing—one to three and—four to six G sheets, respectively, were compared for this purpose. Both proved effective in separating the arylpropyl derivatives of nonsteroidal anti‐inflammatory drugs. The highest resolution and shortest migration times were obtained with G containing high amount of single and double G nanosheets. G affords higher resolution than other types of nanoparticles; stable suspensions can be easily prepared and used as BGE without the need of adding an additional surfactant. This results in a high reproducibility in migration times and stability in background noise. The LOD and LOQ obtained by using G nanoparticles as pseudostationary phases spanned the range 0.29–1.18 mg/L and 0.95–3.95 mg/L, respectively, and the RSD was less than 4.7% in all instances.     

胶束在线扫集毛细管电泳法测定三聚氰胺

研究胶束在线扫集毛细管电泳法测定三聚氰胺的可行性,结果表明,与区带毛细管电泳相比,胶束在线扫集毛细管电泳法富集倍数提高约60倍。缓冲体系为140 mmol/L SDS+20 mmol/L NaH2PO4(pH 2.20)+10%(体积分数)甲醇,分离电压-18 kV,进样时间30 s,测量波长214 nm。考察了SDS浓度、pH、进样时间、运行电压等因素对分离测定的影响情况。在优化条件下,三聚氰胺在9 min时出峰,峰面积RSD≤3.7%。方法检出限、线性范围、相关系数分别为:0.13μg/mL、0.50~32.0μg/mL、0.9997。方法可用于奶粉中三聚氰胺的分离测定。     

Use of high‐conductivity sample solution with sweeping‐micellar electrokinetic capillary chromatography for trace‐level quantification of paliperidone in human plasma

Paliperidone is a new antipsychotic drug with a relatively low therapeutic concentration of 20–60 ng/mL. We established an accurate and sensitive CE method for the determination of paliperidone concentrations in human plasma in this study. To minimize matrix effect caused by quantification errors, paliperidone was extracted from human plasma using Oasis HLB SPE cartridges with three‐step washing procedure. To achieve sensitive quantification of paliperidone in human plasma, a high‐conductivity sample solution with sweeping‐MEKC method was applied for analysis. The separation is performed in a BGE composed of 75 mM phosphoric acid, 100 mM SDS, 12% acetonitrile, and 15% tetrahydrofuran. Sample solution consisted of 10% methanol in 250 mM phosphoric acid and the conductivity ratio between sample matrix and BGE was 2.0 (γ, sample/BGE). The results showed it able to detect paliperidone in plasma samples at concentration as low as 10 ng/mL (S/N = 3) with a linear range between 20 and 200 ng/mL. Compared to the conventional MEKC method, the sensitivity enhancement factor of the developed sweeping‐MEKC method was 100. Intra‐ and interday precision of peak area ratios were less than 6.03%; the method accuracy was between 93.4 and 97.9%. This method was successfully applied to the analysis of plasma samples of patients undergoing paliperidone treatment.     

Simultaneous electrokinetic and hydrodynamic injection with on-line sample concentration via micelle to solvent stacking in micellar electrokinetic chromatography

Simultaneous electrokinetic and hydrodynamic injection (SEHI) of organic cations (tricyclic antidepressant and beta blocker drugs) with on-line sample concentration using micelle to solvent stacking (MSS) was studied in micellar electrokinetic chromatography. Compared to conventional injection, >300-fold improvements in signals were obtained by hydrodynamic injection. However, with SEHI the amount of sample ions introduced into the capillary was increased which afforded a higher gain of up to 4000-fold without compromise to separation efficiency. The electrokinetic injection at negative polarity (anode at the detector end) introduced the micelle bound analytes. The hydrodynamic injection also maintained the MSS boundary inside the capillary. The stability of the MSS boundary affected SEHI where mild conditions that were low voltage as well as pressure injection were desired. The limits of detection were in the range from 0.6–4.2 ng mL⁻¹. A strategy for optimization was described and the method was applied to the ng mL⁻¹ analysis of spiked wastewater after simple dilution and centrifugation.     

Analyte focusing by micelle collapse for liquid extraction surface analysis coupled with capillary electrophoresis of neutral analytes on a solid surface

Liquid extraction surface analysis (LESA) has an advantage of directly sampling analytes on a surface, thus avoiding unnecessary dilution by homogenization of the bulk sample commonly practiced in solid sample analysis. By combining LESA with CE, the additional advantage of separating analytes before detection can be accomplished. For neutral molecules, MEKC needs to be used. Since the detection sensitivity of CE in general suffers from the small capillary dimension, analyte focusing by micelle collapse was employed for enhanced extraction in LESA and sample preconcentration for MEKC. In addition, using a commercial CE instrument, the LESA process was performed much faster and more reliably compared to our first demonstration of LESA‐CE using a homemade CE setup. Three neutral water‐insoluble pesticides sprayed on an apple skin were directly extracted, preconcentrated, and analyzed by the automated LESA‐analyte focusing by micelle collapse‐MEKC with high sensitivity in 10 min. The relative standard deviations of the migration times and peak heights were 0.8–2.1 and 1.2–3.0%, respectively when ametryn was used as an internal standard. The limits of detection obtained with UV absorbance at 200 nm were 1.8–6.4 ppb.     

胶束扫集毛细管电泳快速测定止咳露中的麻黄碱和可待因

采用胶束扫集毛细管电泳, 建立了快速测定止咳露中麻黄碱和可待因含量的方法, 并通过日间实验、柱间实验等对方法的稳定性进行了考察研究.胶束扫集电动色谱缓冲体系含60 mmol/L 十二烷基磺酸钠, 10 mmol/L NaH2PO4 (pH 2.20), 18%乙腈(V/V), 分离电压-14 kV, 测量波长200 nm. 讨论了pH、 SDS浓度、样品溶剂等对分离效果的影响. 在优化条件下, 麻黄碱和可待因均在5 min内出峰, 方法检出限(μg/mL)、线性范围(μg/mL)、相关系数分别为: 麻黄碱 0.433、 1.73～27.7、 0.9997, 可待因0.833、 3.33～50.3、 0.9996, 回收率在96.7%～103.5%之间. 峰面积日内RSD≤4.2% (n=5), 日间RSD≤8.0% (n=5), 柱间实验RSD≤2.3% (n=3).     

Determination of melatonin in commercial preparations by micellar electrokinetic chromatography and spectrofluorimetry

Melatonin was determined in pharmaceutical preparations by means of two simple and reliable analytical methods based on micellar electrokinetic chromatography (MEKC) and spectrofluorimetry. The fluorescence emission values were measured at λ=350 nm when exciting at λ=275 nm. The MEKC analysis was achieved using a system consisting of 40 mM SDS in phosphate buffer (20 mM, pH 7.5). The extraction of melatonin from the tablets was achieved by means of a simple one-step dissolution with methanol/water. Both methods were applied for the determination of melatonin in commercial formulations and galenic preparations. The MEKC procedure allows the quantitative determination of melatonin in all pharmaceutical preparations tested. On the contrary, the spectrofluorimetric method is not suitable for tablets which also contain tryptophan; this interference can be eliminated by a suitable liquid-liquid extraction procedure. The results obtained with the two methods are in good agreement and satisfactory in terms of precision and accuracy.     

Application of a multivariate approach for analyte focusing by micelle collapse‐micellar electrokinetic chromatography for analyzing sunscreen agents in cosmetics

The operating parameters that affect the performance of the online preconcentration technique “analyte focusing by micelle collapse‐MEKC (AFMC‐MEKC)” were examined using a multivariate approach involving experimental design to determine the sunscreen agents in cosmetics. Compared to the single‐variable approach, the advantage of the multivariate approach was that many factors could be investigated simultaneously to obtain the best separation condition. A fractional factorial design was used to identify the fewest significant factors in the central composite design (cCD). The cCD was adopted for evaluating the location of the minimum or maximum response in this study. The influences of the experimental variables on the response were investigated by applying a chromatographic exponential function. The optimized condition and the relationship between the experimental variables were acquired using the JMP software. The ANOVA analysis indicated that the Tris pH value, SDS concentration, and ethanol percentage influenced the separation quality and significantly contributed to the model. The optimized condition of the running buffer was 10 mM Tris buffer (pH 9.5) containing 60 mM SDS, 7 mM γ‐CD, and 20% v/v ethanol. The sample was prepared in 100 mM Tris buffer (pH 9.0) containing 7.5 mM SDS and 20% v/v ethanol. The SDS concentration in the sample matrix was slightly greater than the CMC value that makes the micelle be easily collapsed and the analytes be accumulated in the capillary. In addition, sunscreen agents in cosmetics after 1000‐fold dilution were successfully determined by AFMC‐MEKC.     

On-line two-step stacking in capillary zone electrophoresis for the preconcentration of strychnine and brucine

An on-line sample preconcentration method by two-step stacking i.e., sweeping and micelle to solvent stacking, in capillary zone electrophoresis (CZE) has been developed for the determination of strychnine and brucine in traditional Chinese herbal medicines. After experimental optimizations, the best separation was achieved by using 75 mM phosphate buffer (pH 2.5) with 30% methanol (v/v). Compared with normal CZE injection, 51- and 38-fold improvement in concentration sensitivity was achieved for strychnine and brucine, respectively. The calibration curve was linear in the range of 0.1–5.0 μg mL⁻¹ for both strychnine and brucine, with the correlation coefficients of 0.9998 and 0.9997, respectively. The limits of detection (S/N = 3) for both alkaloids were 0.01 μg mL⁻¹. The inter-day (n = 8) and intra-day (n = 5) reproducibilities expressed as the relative standard deviations for corrected peak area were less than 9.5%. The method was applied to determine strychnine and brucine in two Chinese herbal medicines, with recoveries ranging from 94.2% to 105.4%. The results indicated that the method is simple, rapid, reliable, and can be applied to determine strychnos alkaloids in traditional Chinese herbal medicines.     

Separation and determination of closely related lantibiotics by micellar electrokinetic chromatography

A sensitive micellar electrokinetic chromatography (MEKC) method was developed for the separation and determination of four closely related lantibiotics: gallidermin, cinnamycin, duramycin and nisin. Factors affecting the separation of the lantibiotics such as pH, phosphate buffer concentration, SDS concentration and wavelength for UV detection were investigated. By optimizing these experimental conditions, successful separation was achieved between class 1A lantibiotics (nisin and gallidermin) and class 1B lantibiotics (duramycin and cinnamycin). The four lantibiotics were separated within 12 min in 50 mM phosphate buffer at pH 3.95 ± 0.1 containing 80 mM SDS with UV detection of 214 nm. The LOD (S/N = 3) were 61 ng/mL for gallidermin, 57 ng/mL for cinnamycin, 55 ng/mL for duramycin and 58 ng/mL for nisin. The method was successfully applied to real samples such as fermentation broth, bovine colostrum and predrop beer. This method yielded satisfactory results, with quantitative recoveries of spiked lantibiotics in the three samples ranging from 86.1 to 99.6%.     

Separation and determination of acrylamide in potato chips by micellar electrokinetic capillary chromatography

A simple and rapid method using micellar electrokinetic capillary chromatography (MEKC) was developed for the separation and determination of acrylamide in potato chips at low levels for the first time. The experimental conditions for the separation and quantification of acrylamide were optimized at first. The optimized conditions were: 50 mmol/L Na₂B₄O₇ and 40 mmol/L SDS at pH 10.0, 12 kV applied voltage, 76 cm total length (67 cm effective length) and 75 μm i.d. capillary, 198 nm wavelength, 15 cm high 25 s hydrodynamics sample injection, 20 °C air-cooling. The linear response of acrylamide concentration ranges from 0.5 to 100 μg/mL with high correlation coefficient (r = 0.9986, n = 9). The LOD and LOQ were estimated to be 0.1 and 0.33 μg/mL based on S/N = 3 and 10. The precision values (expressed as R.S.D.) of intra- and inter-day were 0.86-4.35% and 2.61-9.65%, respectively. Recoveries spiked at levels 2, 20, 60 μg/mL ranged between 90.86% and 99.6% with R.S.D. less than 6.5%. Finally, the developed method has been applied to the analysis of real samples and has achieved satisfactory results. All of these indicated that it was a reliable method for the quantification of acrylamide in potato chips.     

胶束扫集毛细管电动色谱法测定药物中3种邻苯二甲酸酯

采用胶束扫集毛细管电动色谱技术,建立了测定药物中邻苯二甲酸二甲酯(DMP)、邻苯二甲酸二乙酯(DZP)和邻苯二甲酸二丁酯(DBP)的方法。电泳缓冲体系含80 mmol/L SDS,20 mmol/L NaH2PO4(pH 2.20),5%甲醇(V/V),分离电压-18 kV,重力进样80s×15.0cm,检测波长225 nm,使用Φ50μm×62.0 cm石英毛细管,有效长度50.0 cm。讨论了磷酸盐浓度、有机改善剂、SDS浓度、分离电压、进样时间等因素的影响,并考察了胶束扫集法对DMP、DEP和DBP的富集能力。在优化条件下,线性关系良好,相关系数大于0.9986,DMP、DEP和DBP的线性范围分别为1.25～240,1.04～200和1.56～200 mg/L,检出限分别为0.26,0.26和0.39 mg/L。方法应用于肠溶片中DMP、DEP和DBP的测定,回收率在93.3%～108%之间,RSD≤5.2%。每次样品测定可在10 min内完成。     

Simple micellar electrokinetic chromatography method for the determination of hydrogen sulfide in hen tissues

A new method for the determination of hydrogen sulfide in hen tissues has been developed and validated. For estimation of hydrogen sulfide content, a sample (0.1 g) of hen tissue was treated according to the procedure consisted of some essential steps: simultaneous homogenization of a tissue and derivatization of hydrogen sulfide to its S‐quinolinium derivative with 2‐chloro‐1‐methylquinolinium tetrafluoroborate, separation of so‐formed derivative by micellar electrokinetic chromatography with sweeping, and detection and quantitation with the use of UV detector set to measure analytical signals at 375 nm. Effective electrophoretic separation was achieved using fused silica capillary (effective length 41.5 cm, 75 μm id) and 0.05 mol/L, pH 8 phosphate buffer with the addition of 0.04 mol/L SDS and 26% ACN. The lower limit of quantification was 0.12 μmol hydrogen sulfide in 1 g of tissue. The calibration curve prepared in tissue homogenate for hydrogen sulfide showed linearity in the range from 0.15 to 2.0 μmol/g, with the coefficient of correlation 0.9978. The relative standard deviation of the points of the calibration curve varied from 8.3 to 3.2% RSD.     

Two-step stacking in capillary zone electrophoresis featuring sweeping and micelle to solvent stacking: II. Organic anions

Two-step stacking of organic anions by sweeping and micelle to solvent stacking (MSS) using cationic cetyltrimethylammonium micelles in co-electroosmotic flow (co-EOF) capillary zone electrophoresis (CZE) is described. The co-EOF condition where the direction of the EOF is the same as the test anions was satisfied by positive dynamic coating of a fused silica capillary with hexadimethrine bromide. The strategy was as follows. After conditioning the capillary with the background solution (BGS), a micellar solution (MS) was injected before the sample solution (S). The BGS, MS and S have similar conductivities. Voltage was applied at negative polarity. The analytes in the micelle-free S zone were swept by micelles from the MS. The swept analytes were brought by the micelles to the MSS boundary where the second stacking step was induced by the presence of organic solvent in the BGS. Finally was the separation of concentrated analytes by CZE. The effect of electrolyte concentration in the S, injection time of the MS and the S and surfactant concentration in the MS were studied. A 20-29, 17-33 and 18-21 times increase in peak height sensitivity was obtained for the test hypolipidaemic drugs (gemfibrozil, fluvastatin and atorvastatin), non-steroidal anti-inflammatory drugs (diflunisal, naproxen, ketoprofen, indoprofen and indomethacin), and herbicides (mecoprop and fenoprop), respectively. The LODs (S/N=3) were from 0.05 to 0.55 μg/mL. The intraday and interday repeatabilities (%RSD, n=12) in terms of retention time, corrected peak area, and peak heights was less than 3.6, 8.9, and 10.8%, respectively. The application of sweeping and MSS in co-EOF CZE together with a simple extraction procedure to a waste water sample spiked with the test herbicides was also demonstrated.     

Cationic vesicles as chiral selector for enantioseparations of nonsteroidal antiinflammatory drugs by micellar electrokinetic chromatography

A vesicle-forming chiral cationic surfactant (1R,2S)-(-)-N-dodecyl-N-methyl-ephedrinium bromide was evaluated as a pseudo-stationary phase in micellar electrokinetic chromatography (MEKC) for enantioseparation of eight non-steroidal anti-inflammatory drugs e.g., carprofen, flurbiprofen, fenoprofen, ibuprofen, indoprofen, ketoprofen, naproxen and suprofen by capillary electrophoresis. The effects of varying experimental conditions such as pH and concentration of surfactant in the running buffer on the enantiomer separation of the drugs are reported. A mixture of five of the above drugs was separated and each enantiomeric pair was also separated simultaneously in a single run by use of the surfactant. The strong electrostatic interactions between the analytes and the vesicles seemed to have a major role in the enantiomeric separation of the profens.