Gold nanoparticle arrays directly grown on nanostructured indium tin oxide electrodes: Characterization and electroanalytical application

This work describes an improved seed-mediated growth approach for the direct attachment and growth of mono-dispersed gold nanoparticles on nanostructured indium tin oxide (ITO) surfaces. It was demonstrated that, when the seeding procedure of our previously reported seed-mediated growth process on an ITO surface was modified, the density of gold nanospheres directly grown on the surface could be highly improved, while the emergence of nanorods was restrained. By field emission scanning electron microscopy (FE-SEM) and cyclic voltammetry, the growth of gold nanoparticles with increasing growth time on the defect sites of nanostructured ITO surface was monitored. Using a [Fe(CN)₆]³⁻/[Fe(CN)₆]⁴⁻ redox probe, the increasingly facile heterogeneous electron transfer kinetics resulting from the deposition and growth of gold nanoparticle arrays was observed. The as-prepared gold nanoparticle arrays exhibited high catalytic activity toward the electrooxidation of nitric oxide, which could provide electroanalytical application for nitric oxide sensing.     

In situ chemical reductive growth of platinum nanoparticles on indium tin oxide surfaces and their electrochemical applications

Platinum nanoparticles directly attached to indium tin oxide (PtNP/ITO) were successfully fabricated by using an in situ chemical reductive growth method. In this method, PtNPs could be grown on the ITO surface via the one-step immersion into the growth solution containing PtCl4(2-) and ascorbic acid. The attached and grown PtNPs were spherical having an agglomerated nanostructure composed of small nanoclusters. From the morphological changes depending on the growth time, which were observed with an FE-SEM, PtNPs were found to be grown via the progressive nucleation mechanism. As the characteristics of the PtNP/ITO were those of a working electrode, it was found that the charge transfer resisivity was significantly lowered due to the grown PtNPs. Hence, for a typical redox system of [Fe(CN)6]3-/[Fe(CN)6]4-, the PtNP/ITO electrode exhibited the electrochemical responses similar to those of the bulk Pt electrode. Furthermore, it was clarified that the PtNP/ITO electrode had significant electrocatalytic properties for the oxygen reduction and methanol oxidation. The present PtNPs that had the agglomerated nanostructure may be promising for a new type of electrode material.     

Seed-mediated growth of palladium nanocrystals on indium tin oxide surfaces and their applicability as modified electrodes

Palladium nanoparticles (PdNPs) were successfully attached and grown on an indium tin oxide (ITO) surface using a seed-mediated growth method, i.e., via a simple two-step immersion of the ITO substrate into the seed and growth solutions. After the growth treatment for 24 h, PdNPs grew up to 60-80 nm, exhibiting crystal-like appearances and accompanying the formation of short rodlike nanocrystals as a minor product. Thus prepared PdNPs tend to stick each other, so that the dense gathering of PdNPs was observed on the ITO surfaces. Due to the dense attachment, the PdNPs directly attached to the ITO (PdNP/ITO) electrode had a significantly lowered charge-transfer resistivity compared with that of a bare ITO, and the redox reaction of [Fe(CN)6]3-/[Fe(CN)6]4- was observed as reversible in 0.1 M phosphate buffer solution. The electrocatalytic property of PdNPs was confirmed for the reduction of oxygen. In addition, some typical responses were observed in 0.5 M H2SO4 with the PdNP/ITO electrode, reflecting both the characteristics of NPs and the thin layer in nanoscale. The present preparation method of PdNP-attached surfaces would be promising for catalytic applications as well as electrochemical uses.     

Potential-assisted assembly of functionalised platinum nanoparticles on electrode surfaces

A method for assembling Pt nanoparticles (5 nm diameter) on indium tin oxide (ITO) and highly oriented pyrolytic graphite (HOPG) electrodes, via the potential-assisted deposition of pre-formed perthiolated-β-cyclodextrin-capped Pt nanoparticles is described. Cyclic voltammetry allowed control over the surface coverage of monodisperse Pt nanoparticles in a simple fashion, as evidenced by the voltammetric response and atomic force microscopy of the resulting electrode surface. The Pt nanoparticle arrays formed in this way were electrocatalytically active towards proton reduction-hydrogen evolution. The methodology described thus opens up a new approach for the deposition of metal nanoparticles with controlled surface density for the investigation of electrocatalytic processes.     

纳米银粒子在氨基注入氧化铟锡玻璃基体表面的高密度吸附

研究了纳米银（AgNPs）在氨基注入氧化铟锡（ITO）薄膜表面的吸附.通过氨基注入的疗法得到了氨基功能化的ITO表面（NH₂/ITO）,并将纳米银直接吸附在NH₂/ITO上得到纳米银修饰NH₂/ITO基体（AgNPs/NH₂/ITO）.使用傅里叶红外光谱、X射线光电子能谱、原子力显微镜、扫描电镜、紫外可见光谱和电化学方法对AgNPs/NH₂/ITO制备过程进行了表征.结果显示纳米银可在NH₂/ITO表面高密度地吸附,并且纳米银有良好的电化学活性.这种不借助于有机连接分子吸附纳米银的方法为制备纳米银修饰材料提供了新的选择.     

Direct electrodeposition of gold nanoparticles onto indium/tin oxide film coated glass and its application for electrochemical biosensor

A novel electrochemical deposition method for growth of gold nanoparticles (GNPs) on indium tin oxide (ITO) thin film coated glass was investigated. The resulting electrode surface was characterized by SEM, UV–Vis spectroscopy and electrochemical methods. The GNPs directly attached on the electrode surface with a quasi-spherical shape and their sizes of diameters were in the range of 20–35 nm with a quite symmetric distribution. With increasing electrodeposition cycles of cyclic voltammetry, the density of GNPs on ITO electrode surface was increased. The potential utility of the GNPs modified ITO electrode was investigated. Superoxide dismutase (SOD) was successfully immobilized on GNPs modified ITO electrode and the direct electron transfer between enzyme and electrode surface realized. The enzyme electrode exhibited a rapid and high response to superoxide anion.     

Fabrication and characterization of copper nanoparticle thin-films and the electrocatalytic behavior

Copper nanoparticles, stabilized by cysteine, have been formed thin-films on indium tin oxide (ITO) electrodes with (3-mercaptopropyl) trimethoxysilane (MPTMS). Scanning electron micrograph (SEM) demonstrates that the films are uniform and the copper nanoparticles are homogeneously distributed on the ITO electrode surface. Electrochemical experiments reveal that the obtained copper nanoparticles modified electrodes show improved electron-transfer characteristics and exhibit high electrocatalytic activity to the reduction of nitrite and nitric oxide, which can be utilized as an efficient electrochemical sensor.     

Silver-nanoparticle-attached indium tin oxide surfaces fabricated by a seed-mediated growth approach

By applying a seed-mediated growth method that had been reported for the chemical synthesis of Ag nanorods and nanowires in aqueous solution, we successfully attached Ag nanosphere and nanorod particles to indium tin oxide (ITO) surfaces. In this method, it is characteristic that the attachment can be performed without using bridging reagents, such as 3-mercaptopropyltrimethoxysilane, but rather through a two-step immersion into the seed solution first and then into the growth solution containing AgNO(3), cetyltrimethylammonium bromide, and ascorbic acid. It was found that the formed nanostructures were very sensitive to the amount of ascorbic acid in the growth solution. Whereas Ag nanoparticles grew on the ITO surface with a moderate dispersion when the concentration of ascorbic acid in the growth solution was 0.64 mM, the formation of nanorods and nanowires was observed when the ascorbic acid concentration was increased to 0.86 mM. The attachment of Ag nanoparticles onto the ITO surfaces was strong enough for further use, e.g., as a working electrode. From electrochemical measurements, it was confirmed that the outer spheres of the Ag nanoparticles involved in the redox reaction show the typical oxidation and reduction waves of Ag. In addition, the redox behavior of [Fe(CN)(6)](3-)/[Fe(CN)(6)](4-) was improved on the Ag-nanoparticle-attached ITO (AgNP/ITO) electrode, reflecting the low electron-transfer resistivity, which is a remarkable advantage of the present fabrication without using bridging reagents. This result indicated that the Ag nanoparticles promote the electron-transfer reactions by being present on the conducting ITO surface. The AgNP/ITO electrode was examined for the reduction of the methyl viologen dication in order to discuss some features of the present fabrication.     

Lack of nano size effect on electrochemistry of dopamine at a gold nanoparticle modified indium tin oxide electrode

Nanometer sized materials have been shown to possess excellent chemical and electrochemical catalytic properties. In this work, a gold nanoparticle (AuNP) modified indium tin oxide (ITO) electrode was employed for investigating its electro-catalytic property. AuNP was deposited on the 3-aminopropyltriethoxysilane (APTES) modified ITO electrode by self-assembly, and was characterized by scanning electron microscopy and cyclic voltammetry. Although the electrochemical reaction of dopamine was very sluggish on the ITO/APTES electrode, it was significantly enhanced after AuNP deposition. The cyclic voltammogram exhibited apparent dependence on the surface coverage of 11 nm AuNPs, which could be rationalized by different modes of mass diffusion. Among the different sizes of AuNP investigated, the lowest anodic peak potential was observed on 11 nm AuNP. However, the potential was still about 50 mV more positive than that obtained on a bulk gold electrode of similar geometry. It is therefore concluded that there is no nanometer size effect of AuNP modified ITO on the electrochemistry of dopamine.     

Functionalized surface as template for in situ generation of two-dimensional metal nanoparticle assembly

Two-dimensional gold nanoparticle assemblies with an average nanoparticle size of 6 nm are generated on silicon and indium tin oxide (ITO)-coated glass surfaces, functionalized with polyethylenimine (PEI) silane monolayer. Contact angle measurements show increased hydrophilic character of the surface due to nanoparticle formation. X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM) are used to monitor the chemical and structural development of these nanostructures, while UV–vis spectroscopy is used to follow the formation of the nanoparticle assemblies. This paper elucidates a simple route to in situ synthesis of surface immobilized gold nanoparticles under ambient conditions and also extends to the synthesis of other surface bound nanoparticles, like silver and platinum. Gold nanoparticle assemblies generated in this study are also catalytically active towards methanol oxidation reaction (MOR), which is relevant for direct methanol fuel cells (DMFCs).     

Amperometric sensing of hydrogen peroxide via an ITO electrode modified with gold nanoparticles electrodeposited on a CoMn-layered double hydroxide

Microchimica Acta - An electrochemical sensor for hydrogen peroxide (H2O2) has been fabricated by electrodepositing gold nanoparticles (AuNPs) on an indium tin oxide (ITO) electrode modified with...     

Electrochemical characterization of polyelectrolyte/gold nanoparticle multilayers self-assembled on gold electrodes

Polyelectrolyte/gold nanoparticle multilayers composed of poly(l-lysine) (pLys) and mercaptosuccinic acid (MSA) stabilized gold nanoparticles (Au NPs) were built up using the electrostatic layer-by-layer self-assembly technique upon a gold electrode modified with a first layer of MSA. The assemblies were characterized using UV-vis absorption spectroscopy, cyclic and square-wave voltammetry, electrochemical impedance spectroscopy, and atomic force microscopy. Charge transport through the multilayer was studied experimentally as well as theoretically by using two different redox pairs [Fe(CN)(6)](3-/4-) and [Ru(NH(3))(6)](3+/2+). This paper reports a large sensitivity to the charge of the outermost layer for the permeability of these assemblies to the probe ions. With the former redox pair, dramatic changes in the impedance response were obtained for thin multilayers each time a new layer was deposited. In the latter case, the multilayer behaves as a conductor exhibiting a strikingly lower impedance response, the electric current being enhanced as more layers are added for Au NP terminated multilayers. These results are interpreted quite satisfactorily by means of a capillary membrane model that encompasses the wide variety of behaviors observed. It is concluded that nonlinear slow diffusion through defects (pinholes) in the multilayer is the governing mechanism for the [Fe(CN)(6)](3-/4-) species, whereas electron transfer through the Au NPs is the dominant mechanism in the case of the [Ru(NH(3))(6)](3+/2+) pair.     

Laser-induced temperature jump electrochemistry on gold nanoparticle-coated electrodes

Laser-induced temperature jumps (LITJs) at gold nanoparticle-coated indium tin oxide (ITO) electrodes in contact with electrolyte solutions have been measured using temperature-sensitive redox probes and an infrared charge-coupled device. Upon irradiation with 532 nm light, interfacial temperature changes of ca. 20 degrees C were recorded for particle coverages of ca. 1 x 1010 cm-2. In the presence of a redox molecule, LITJ yields open-circuit photovoltages and photocurrents that are proportional to the number of particles on the surface. When ssDNA was used to chemisorb nanoparticles to the ITO surface, solution concentrations as low as 100 fM of target ssDNA-modified nanoparticles could be detected at the electrode surface.     

Redox properties of undoped 5 nm diamond nanoparticles

This paper demonstrates the promoting effects of 5 nm undoped detonation diamond nanoparticles on redox reactions in solution. An enhancement in faradaic current for the redox couples Ru(NH(3))(6)(3+/2+) and Fe(CN)(6)(4-/3-) was observed for a gold electrode modified with a drop-coated layer of nanodiamond (ND), in comparison to the bare gold electrode. The ND layer was also found to promote oxygen reduction. Surface modification of the ND powders by heating in air or in a hydrogen flow resulted in oxygenated and hydrogenated forms of the ND, respectively. Oxygenated ND was found to exhibit the greatest electrochemical activity and hydrogenated ND the least. Differential pulse voltammetry of electrode-immobilised ND layers in the absence of solution redox species revealed oxidation and reduction peaks that could be attributed to direct electron transfer (ET) reactions of the ND particles themselves. It is hypothesised that ND consists of an insulating sp(3) diamond core with a surface that has significant delocalised pi character due to unsatisfied surface atoms and C[double bond, length as m-dash]O bond formation. At the nanoscale surface properties of the particles dominate over those of the bulk, allowing ET to occur between these essentially insulating particles and a redox species in solution or an underlying electrode. We speculate that reversible reduction of the ND may occur via electron injection into available surface states at well-defined reduction potentials and allow the ND particles to act as a source and sink of electrons for the promotion of solution redox reactions.     

薄层循环伏安法研究硝基苯/水界面上离子诱导的电子转移反应

应用薄层循环伏安法研究了硝基苯/水两相界面间,且有共同离子四丁基铵TBA+存在于两相中,在有机相中的四氰化二甲基苯醌(TCNQ)与水相中的K4Fe(CN)6之间发生的反向电子转移反应。在直径为0.64cm的裂解石墨电极上用2μL硝基苯溶液使之自然扩散在电极表面形成薄层的有机相,并以此作为工作电极。对电极为铂丝(0.5mm),参比电极为Ag/AgCl电极,均置于总体积为2mL的水相中。由于共同离子TBA+的诱导,在硝基苯/水界面间,在已氧化的TCNQ+阳离子(在有机相中)与[Fe(CN)6]4-阴离子(在水相中)之间发生了反向电子转移反应。试验证明:在一定条件下,通过改变两相中共同离子的浓度,可使一些不能发生的两相界面的电子转移反应得以发生;这类电子转移反应系受界面电位差所控制。此外,还测得了在恒定的共同离子浓度比值的条件下,此两相界面电子转移反应的表观速率常数(k)为0.135cm.s-1.mol-1。     

Simplifying the evaluation of graphene modified electrode performance using rotating disk electrode voltammetry

Graphene modified electrodes have been fabricated by electrodeposition from an aqueous graphene oxide solution onto conducting Pt, Au, glassy carbon, and indium tin dioxide substrates. Detailed investigations of the electrochemistry of the [Ru(NH(3))(6)](3+/2+) and [Fe(CN)(6)](3-/4-) and hydroquinone and uric acid oxidation processes have been undertaken at glassy carbon and graphene modified glassy carbon electrodes using transient cyclic voltammetry at a stationary electrode and near steady-state voltammetry at a rotating disk electrode. Comparisons of the data with simulation suggest that the transient voltammetric characteristics at graphene modified electrodes contain a significant contribution from thin layer and surface confined processes. Consequently, interpretations based solely on mass transport by semi-infinite linear diffusion may result in incorrect conclusions on the activity of the graphene modified electrode. In contrast, steady-state voltammetry at a rotating disk electrode affords a much simpler method for the evaluation of the performance of graphene modified electrode since the relative importance of the thin layer and surface confined processes are substantially diminished and mass transport is dominated by convection. Application of the rotated electrode approach with carbon nanotube modified electrodes also should lead to simplification of data analysis in this environment.     

Electrochemical Behavior and Application of Pirarubicin at Gold Nanoparticles–Modified Indium Tin Oxide Electrode

Abstract

A new type of gold nanoparticles–attached indium tin oxide electrode was made. By SEM and EDS, the as‐prepared gold nanoparticles–modified ITO electrode was characterized. This modified electrode has been used for the determination of pirarubicin (THP) in urine by cyclic voltammetry. Compared to a bare ITO electrode, the modified electrode exhibited a marked enhancement in the current response. Liner calibration curves are obtained in the range 5×10^?9mol/L～1.5×10^?6 mol/L with a detection limit of 1×10^?9 mol/L. The percentage of the recoveries ranged from 99.3% to 106.3%. The practical analytic utility of the method is illustrated by quantitative determination of THP in urine.     

Interfacial electrochemistry of cytochrome c at tin oxide,indium oxide,gold, and platinum electrodes

Cyclic voltammetry has been used to study the heterogeneous electron transfer kinetics of horse heart cytochrome c in pH 7 tris/cacodylate media at several electrode surfaces. Reversible voltammetric responses (formal heterogeneous electron transfer rate constant>10^?2 cm/s) were observed at bare gold electrodes and at tin-doped indium oxide semiconductor electrodes for certain experimental conditions. Quasireversible voltammetric responses were more typically observed at fluorine-doped tin oxide semiconductor electrodes, bare platinum electrodes, and at the indium oxide electrodes. Reaction rates at bare metal electrodes were strongly dependent on pretreatment procedures and experimental protocol. Reaction rates at metal oxide electrodes were strongly dependent on solution conditions, pretreatment procedures, and on the hydration state of the electrode surface. A general mechanistic scheme involving both interfacial electrostatic and chemical interactions is proposed for cytochrome c electrode reactions. The asymmetric distribution of surface charges on cytochrome c appears to play a dominant role in controlling electron transfer rates by its interaction with the electric field at the electrode surface. Electron transfer distances are also considered, and it is concluded that electron transfer between an electrode surface and the exposed heme edge of properly oriented cytochrome c molecules involves maximum distances of ca. 0.6–0.9 nm.     

Gold–carbon three dimensional film electrode prepared from oppositely charged conductive nanoparticles by layer-by-layer approach

Gold–carbon three dimensional film electrode was prepared from oppositely charged conductive particles by layer-by-layer approach. This was done by alternative immersion of indium tin oxide plate into suspension of positive (gold) and negative (carbon) particles. The film formation is confirmed by scanning electron microscopy. The nanoparticulate film is stable and the obtained electrode exhibits catalytic current of dioxygen reduction connected with the presence of gold nanoparticles. After adsorption of bilirubin oxidase similar effect is observed with substantial decrease of overpotential – typical for bioelectrocatalytic reaction. Both catalytic currents are proportional to the number of immersion and withdrawal steps.     

Pd纳米粒子敏化的纳米单层TiO_2-Ru(Ⅱ)螯合物修饰电极对单磷酸鸟苷的电催化氧化行为

利用LB膜技术可控制备了纳米单层的二氧化钛-有机钌螯合物杂化膜,并研究了上述无机-有机杂化膜修饰电极在Pd纳米粒子敏化后对单磷酸鸟苷(GMP)的电催化氧化行为.实验结果表明:(1)纳米单层TiO2/[Ru(phen)2(dC18bpy)]2+(简称为TiO2-Ru)杂化膜的平均厚度为(3.2±0.5)nm;(2)在光照条件下TiO2-Ru杂化膜能有效催化还原[Pd(NH3)4]2+形成粒径位于20～200nm之间的Pd纳米粒子;(3)纳米单层TiO2-Ru/Pd杂化膜能高效催化氧化具有供电子能力的单磷酸鸟苷(GMP),与纳米单层TiO2-Ru杂化膜修饰的ITO电极(ITO/TiO2-Ru)相比,当工作电压为1200mV时,ITO/TiO2-Ru/Pd电极在含有1×10-3molL-1GMP的磷酸盐缓冲液中,单位面积的催化氧化电流提高了约36倍;(4)Pd纳米粒子的引入消除了金属钌螯合物中配体对电子传递的阻碍作用,改变了电子传递途径,从而有效减少了电子空穴对的复合,提高了杂化膜修饰电极(ITO/TiO2-Ru/Pd)的电子传递效率.