Characterization of laser-generated silicon plasma

A study of visible laser ablation of silicon, in vacuum, by using 3 ns Nd:YAG laser radiation is reported. Nanosecond pulsed ablation, at an intensity of the order of 10¹⁰ W/cm², produces high non-isotropic emission of neutrals and ionic species. Mass quadrupole spectrometry, coupled to electrostatic ion deflection, allows estimation of the energy distributions of the emitted species from plasma. Neutrals show typical Boltzmann-like distributions while ions show Coulomb-Boltzmann-shifted distributions depending on their charge state. Time-of-flight measurements were also performed by using an ion collector consisting of a collimated Faraday cup placed along the normal to the target surface. Surface profiles of the craters, created by the laser radiation absorption, permitted to study the ablation threshold and ablation yields of silicon in vacuum. The plasma fractional ionization, temperature and density were evaluated by the experimental data. A special regard is given to the ion acceleration process occurring inside the plasma due to the high electrical field generated at the non-equilibrium plasma conditions. The angular distribution of the neutral and ion species is discussed.     

Ion acceleration from aluminium plasma generated by a femtosecond laser in different conditions

Non-equilibrium plasma was obtained by irradiating Al foils in vacuum with a femtosecond (fs) laser at intensities of the order of 10¹⁸ W/cm². Protons and other light ions were accelerated in the forward direction by using the target-normal-sheath acceleration regime. Time-of-flight technique was employed to measure the ions' kinetic energy using SiC detectors placed at known distances and angles. The ion acceleration was monitored under different conditions of laser focal position, laser pulse energy, and laser contrast. The target was irradiated using different thicknesses and anti-reflecting graphene films. By optimizing the laser parameters, irradiation conditions, and target properties, it was possible to accelerate up to 2.3 MeV per charge state, as will be presented and discussed.     

Laser-generated ns plasma pulses characterized using SiC Schottky diode

The nonequilibrium plasma generated by nanosecond laser pulse is characterized using a SiC detector connected in time-of-flight configuration to measure the radiations emitted from the plasma. Different metallic targets were irradiated by the pulsed laser at an intensity of 10¹⁰ W/cm² and 200 mJ pulse energy. The SiC allows detecting ultraviolet radiations and soft X-rays, electrons, and ions. The obtained plasma has a temperature of the order of tens to hundreds eV depending on the atomic number of the irradiated target and ion accelerations of the order of 100 eV per charge state.     

Particle-in-cell simulation for experimental ion acceleration by fs laser-generated plasma

ABSTRACT

Particle in cell simulation was applied to fit the measurements of protons and ions acceleration obtained using an fs laser pulse irradiating a thin foil in target-normal-sheath-acceleration regime. The simulation code calculates the maximum electrical field generated in the rear side of the target driving the forward ions acceleration. The electron density versus time and space, and the plasma temperatures are evaluated using a medium contrast laser at an intensity of about 10¹⁹?Wcm^?2. Proton acceleration above 10?MeV was experimentally measured using SiC detectors connected in time-of-flight configuration. A comparison between theoretical aspects and experimental data is reported and discussed.     

Non-equilibrium plasma production by pulsed laser ablation of gold

A gold target has been irradiated with a Q-switched Nd:Yag laser having 1064?nm wavelength, 9?ns pulse width, 900?mJ maximum pulse energy and a maximum power density of the order of 10¹⁰?W/cm². The laser–target interaction produces a strong gold etching with production of a plasma in front of the target. The plasma contains neutrals and ions having a high charge state. Time-of-flight (TOF) measurements are presented for the analysis of the ion production and ion velocity. A cylindrical electrostatic deflection ion analyzer permits measurement of the yield of the emitted ions, their charge state and their ion energy distribution. Measurements indicate that the ion charge state reaches 6⁺ and 10⁺ at a laser fluence of 100?J/cm² and 160?J/cm², respectively. The maximum ion energy reaches about 2?keV and 8?keV at these low and high laser fluences, respectively. Experimental ion energy distributions are given as a function of the ion charge state. Obtained results indicate that electrical fields, produced in the plume, along the normal to the plane of the target surface, exist in the unstable plasma. The electrical fields induce ion acceleration away from the target with a final velocity dependent on the ion charge state. The ion velocity distributions follow a “shifted Maxwellian distribution”, which the authors have corrected for the Coulomb interactions occurring inside the plasma.     

Near‐3‐MeV protons from target‐normal‐sheath‐acceleration femtosecond laser irradiating advanced targets

Advanced targets based on graphene oxide and gold thin film were irradiated at high laser intensity (10¹⁸–10¹⁹ W/cm²) with 50‐fs laser pulses and high contrast (10⁸) to investigate ion acceleration in the target‐normal‐sheath‐acceleration regime. Time‐of‐flight technique was employed with SiC semiconductor detectors and ion collectors in order to measure the ion kinetic energy and to control the properties of the generated plasma. It was found that, at the optimized laser focus position with respect to the target, maximum proton acceleration up to about 3 MeV energy and low angular divergence could be generated. The high proton energy is explained as due to the high electrical and thermal conductivity of the reduced graphene oxide structure. Dependence of the maximum proton energy on the target focal position and thickness is presented and discussed.     

Tungsten ions produced by infrared pulsed laser irradiation

Energetic ions have been obtained irradiating a tungsten target with a Q-switched Nd:Yag laser, 1064?nm wavelength, 9?ns pulse width, 900?mJ maximum pulse energy and power density of the order of 10¹⁰?W/cm². The laser-target interaction induces a strong metal etching with production of plasma in front of the target. The plasma contains neutrals and ions with high charge state. Time-of-flight measurements are presented for qualitative analysis of the ion production. A cylindrical electrostatic ion analyzer permits measuring of the yield of emitted ions, the charge state of detected ions and the ion energy distribution. Measurements indicate that, at a laser fluence of the order of 100?J/cm², the charge state may reach 9+ and the ion energy reaches about 5?keV. The ion energy distribution is given as a function of the charge state. Experimental results indicate that an electrical field is developed along the normal to the plane of the target surface, which accelerates the ions up to high velocity. The ion velocity distributions follow a “shifted Maxwellian distribution”, which the author has corrected for the Coulomb interactions occurring inside the plasma.     

Optical detection system for laser cooling and precision laser spectroscopy of relativistic highly charged ions at the CSRe

Laser cooling and precision laser spectroscopy experiments of relativistic highly charged ions are being prepared at the heavy-ion experimental cooler storage ring (CSRe). Optical detection of fluorescence photons, emitted from the laser-excited ions, is extremely important for both powerful methods. In this paper, we briefly report on the current status of the existing optical detectors and also on their performance during laser cooling of relativistic Li-like ¹⁶O⁵⁺ ion beams at the CSRe. In addition, we introduce the designs for our new optical detection systems, which have much higher photon detection efficiencies and can cover a much broader wavelength range. These detector systems will be used for the upcoming laser spectroscopy experiment of Li-like ¹⁶O⁵⁺ ions, as well as for future laser spectroscopy experiments with other highly charged ions.     

Comparison of the efficiency of 63Ni beta-radiation detectors made from silicon and wide-gap semiconductors

The current induced by the radiation from a ⁶³Ni film of variable thickness is simulated taking into account the real spectrum of emitted electrons and their angular distribution for GaN. The efficiency of β-radiation detectors made from Si and SiC is estimated based on the results obtained in this paper and previously. Using a scanning electron microscope the efficiency of β-radiation detectors made from Si and SiC under conditions corresponding to β radiation from a Ni film with a thickness of 3 μm and activity of 10 mCi/cm² is analyzed. It is shown that the efficiency of real Si-based structures is virtually as good as the efficiency of SiC-based structures.     

Energy analysis of protons emitted from Nd:YAg laser-generated plasmas

Hydrogenated targets have been irradiated in vacuum with the pulsed Nd:YAg laser at intensities of the order of 10¹⁰ W/cm². The laser-generated plasma, produced by the interaction with the solid, emits protons and other ions along the normal to the target surface. Ion collectors and ion energy analyzer were used to measure the current, the angular emission and the energy distributions of the emitted protons. Time-of-flight measurements, Coulomb–Boltzmann-distributions and the fits of experimental data were also used in order to evaluate the equivalent ion plasma temperature and the ion acceleration developed in the non-equilibrium-pulsed plasma.     

Six MeV proton acceleration from plasma generated by high-intensity laser using advanced thin polyethylene targets

Proton acceleration can be induced by non-equilibrium plasma developed by high-intensity laser pulses, at 10¹⁶ W/cm², irradiating different types of thin polyethylene targets. The process of proton acceleration and directive yield emission was investigated, optimizing the laser parameters, the irradiation conditions, and the target properties. The use of 600 J pulse energy, a laser focalization inducing self-focusing effects and advanced targets with embedded nanoparticles and optimal thicknesses, has permitted to accelerate forward protons up to the energies of about 6 MeV and amount of the order of 10¹⁵ H⁺/pulse. High proton energy is obtained using thin foils enriched with gold nanoparticles, whereas high proton yield is obtained using targets with a thickness of about 10 μm. The plasma diagnostics using SiC semiconductor detectors in time-of-flight configuration was fundamental to monitor the optimal conditions to improve the plasma processes concerning the ion acceleration and the X-ray and relativistic electron emission.     

Ferrihydrite modification by boron doping

Application of the electrostatic ion storage ring ELISA to studies of clusters and biomolecules is discussed. Ions injected from a plasma source or a sputter source are hot, and at short times the yield of neutrals is usually dominated by decay of metastable ions. We have demonstrated that the decay function is close to a 1/t dependence when the internal energy of the ions is conserved, i.e., when photon emission can be ignored. Deviations from a 1/t distribution therefore gives information about the radiative lifetime or, for larger systems, about the intensity of the emitted radiation. Systematic measurements have been carried out for fullerene anions C _N ^?, for even values of N from 36 to 96, to test a classical dielectric model. Recently we have installed an electrospray ion source with a Paul trap for bunching, which can be used to inject biomolecular ions from solution, and the first experiments on laser spectroscopy of biomolecules have been carried out. Also lifetimes of excited states have been measured for stored biomolecular ions excited by a laser pulse.

     

Self-focusing and nonlinear acceleration process in laser produced plasma

Ruby laser intensities exceedingI ^* - 10¹⁴ W/cm² create a predominant acceleration of dense plasma due to nonlinear collisionless interaction resulting mainly from collective effects. Recoil causes confinement of the plasma interior in the form of a superlinearly increased radiation pressure. Similar nonlinear forces produce self-focusing in plasmas at a threshold laser power of only 10⁵ to 10⁶ W. The resulting filaments have intensitiesI ^*, from which their diameter can be determined in agreement with measurements of Korobkin and Alcock. These high intensities should allow some observed properties of laser produced plasmas (keV ions, linear increase of the ion charge) to be interpreted on the basis of the nonlinear acceleration described.     

Correlation of highly charged ion and X-ray emissions from the laser-produced plasma in the presence of non-linear phenomena

Flux of X-ray radiation emitted from the Ta plasma, produced by the fundamental (1ω) and the third harmonic (3ω) frequencies of the high-power iodine laser PALS, was studied in dependence on the laser focus position. One or two (three) maxima, corresponding to the hard or soft component of the emitted spectrum, can appear, according to the experimental conditions. These dependencies are compared with those published by other authors, and also with our results concerning the highly charged ion generation. At laser intensities above I _L～ 10¹⁴ W/cm², the participation of non-linear processes in the pre-formed plasma was confirmed.     

Emission characteristics of debris from CO<Subscript>2</Subscript> and Nd:YAG laser-produced tin plasmas for extreme ultraviolet lithography light source

We describe a comparative study of the emission characteristics of debris from CO₂ and Nd:YAG laser-produced tin plasmas for developing an extreme-ultraviolet (EUV) lithography light source. Tin (Sn) ions and droplets emitted from a Sn plasma produced by a CO₂ laser or an Nd:YAG laser were detected using Faraday cups and quartz crystal microbalance (QCM) detectors, respectively. The droplets were also monitored by using silicon substrates as witness plates. The results showed higher ion kinetic energy and lower particle emission for the CO₂ laser than the Nd:YAG laser for the same laser energy (50 mJ). The average ion energy was 2.2 keV for the CO₂ laser-produced plasma (LPP), and 0.6 keV for the Nd:YAG LPP. The debris accumulation of the CO₂ LPP detected by the QCM detectors, however, was less than one fourth of that of the Nd:YAG LPP for the same laser energy. Using ion energy data, the mirror lifetime is estimated for the CO₂ and Nd:YAG lasers. In both cases, the upper limit of the number of shots was of the order of 10⁶. PACS  52.38.DX; 52.38.Ph; 52.38.Mf     

Carbon-plasma produced in vacuum by 532 nm-3 ns laser pulses ablation

A study of VIS laser ablation of graphite, in vacuum, by using 3 ns Nd:YAG laser radiation is reported. Nanosecond pulsed ablation gives an emission mass spectrum attributable to C_n neutral and charged particles. Mass quadrupole spectroscopy, associated to electrostatic ion deflection, allows estimation of the velocity distributions of several of these emitting species within the plume as a function of the incident laser fluence. Time gated plume imaging and microscopy measurements have been used to study the plasma composition and the deposition of thin carbon films. The multi-component structure of the plume emission is rationalized in terms of charge state, ions temperature and neutrals temperature. A special regard is given to the ion acceleration process occurring inside the plasma due to the high electrical field generated in the non-equilibrium plasma conditions. The use of nanosecond laser pulses, at fluences below 10 J/cm², produces interesting C-atomic emission effects, as a high ablation yield, a high fractional ionization of the plasma and presence of nanostructures deposited on near substrates.     

Observation of negative alkali ions from alkali halides during 248-nm laser irradiation

Below laser fluences where a plasma is formed (the so-called plasma or plume formation threshold) a number of fundamental phenomena can occur where particles such as atomic and molecular ions, atoms and molecular neutrals, and electrons can be emitted. An understanding of such processes is necessary to develop predictive models for material removal from laser irradiated surfaces—at the foundation of laser etching, machining, and pulsed laser deposition. We have reported on a number of the mechanisms for such emission processes. Here, due to space limitations, we present a summary of our studies on the formation of negative alkali ions from single crystal KCl during exposure to pulsed 248-nm radiation at fluences well below the threshold for plasma formation. Despite the high electron affinities of the corresponding halogen atoms, negative halogen ions were not detected. Significantly, the positive and negative alkali ion distributions overlap strongly in time and space, consistent with K formation by the sequential attachment of two electrons to K⁺. Negative alkali ions are also observed under comparable conditions from LiF, NaCl, and KBr. In each material, the strong overlap between the positive and negative alkali ion distributions, and the lack of detected negative halogen ions, suggest that negative ion formation involves a similar mechanism.     

Ablation process of silica glass induced by laser plasma soft X-ray irradiation

Silica glass can be machined by irradiation with laser plasma soft X-rays on nano- and micrometer scale. We have investigated the ablation process of silica glass induced by laser plasma soft X-ray irradiation. We observed ionic and neutral species emitted from silica surfaces after irradiation. Dominant ions and neutrals are O⁺ and Si⁺ ions and Si, O, SiO and Si₂ neutrals, respectively. The ions have kinetic energies of 13 and 25 eV, which are much higher than those of particles emitted by evaporation. The energy of laser plasma soft X-rays absorbed to silica glass at a fluence of 1.4 J/cm² is estimated to be 380 kJ/cm³, which is higher than the binding energy of SiO₂ of 76 kJ/cm³. These results suggest that the most of the bonds in silica glass are broken by absorption of laser plasma soft X-rays, that several percent of the atoms are ionized, and that neutral atoms are emitted together with repulsive ions. The process possibly enables us to fabricate nano structures.     

Short wavelength X-ray emission generated by highly excited cluster beams

X-ray radiation is studied for large clusters consisting of 10⁷–10¹⁰ atoms and irradiated by an intense laser pulse with an intensity ranged from (10¹⁴ up to 10¹⁸ W/cm²). The model is developed for such a laser plasma that includes the radiative transitions and the processes of excitation and quenching of multicharged ions of this plasma by electron impact. Due to interaction of a radiating multicharged ion with a surrounding plasma, spectral lines of emission are broaden and neighboring spectral lines are overlapped. As a result, the spectrum of radiation of multicharged ions is transformed into a continuous spectral band. The model under consideration includes important plasma processes including dielectronic recombination, spontaneous radiation, excitation, quenching and ionization of multicharged ions by electron impact. On the basis of the model developed the X-ray spectrum and spectral power are evaluated. In the range of laser intensities under consideration a laser plasma formed contains multicharged ions with charges Z = 26?36 that corresponds to the 3d-electron shell in the xenon case.     

Scattered ionizing radiations from low-energy focus plasma and radiation dosimetery assessment

Scattered ionizing radiation emissions from a low-energy plasma focus (0.1 kJ Mather-type) device operating with different gases were studied. The plasma focus device was powered by a capacitor bank of 1 μF at 18 kV maximum charging voltage. The radiation emissions were investigated using time-integrated thermoluminescence TLD-500. These detectors were calibrated against standard X-ray machine as well as standard γ sources (⁶⁰Co and ¹³⁷Ca). Calibration of detectors showed linear relation over all the region of measurements. It was found that radiation levels would be minimum for different gases, when the gas pressure was between 0.5 and 0.8 Torr. Only helium deviated from this phenomenon as it gave maximum radiation level at 0.8 Torr pressure. It was also found that, for all the gases used, the radiation levels were maximum when the applied voltage was 15 keV.