Functionalization of carbon nanotubes with biodegradable supramolecular polypseudorotaxanes from grafted-poly(ε-caprolactone) and α-cyclodextrins

Functionalization of multiwalled carbon nanotubes (MWNTs) with biodegradable supramolecular polypseudorotaxanes has been successfully performed by utilizing surface-initiated ring-opening polymerization of ε-caprolactone (CL) to yield poly(ε-caprolactone)-grafted MWNTs (MWNT-g-PCL), followed by forming inclusion complexes between grafted-PCL chains and α-cyclodextrins (α-CDs) to give α-CD-NTPCL hybrids. There are significant differences in the morphology and solubility of MWNTs before and after introduction of α-CD. Some protuberances are clearly observed for α-CD-NTPCL as compared with MWNT-g-PCL. Furthermore, the host-guest stoichiometry (monomeric unit of CL/α-CD molar ratio) for α-CD-NTPCL is much higher than that of polypseudorotaxanes consisted of linear PCL and α-CDs. This observation can be explained by a combination of several reasons including the steric hindrance of grafted-PCL, the competitive exclusion between adjacent PCL chains toward α-CD, and the addition order of α-CD as well as the host-guest feed ratio. The present methodology may open up a new opportunity toward the application of supramolecular chemistry for the chemical manipulation and processing of CNTs. Moreover, such novel supramolecular hybrids provide an entry to extend the applications of CNTs to medicine and biology fields through embedding the functional polymers and heterogeneous components.     

Bismaleimide/carbon nanotube hybrids for potential aerospace application: I. Static and dynamic mechanical properties

Two kinds of hybrids based on diallyl bisphenol A modified bismaleimide (BMI‐BA) and carbon nanotubes (CNTs) or aminated carbon nanotubes (A‐CNTs) were prepared, their static and dynamic mechanical properties were investigated in detail by using impact and flexural measurements as well as dynamic mechanical analysis (DMA). Results show that these mechanical properties of hybrids greatly depended on the nature (or the functional groups on CNTs) and loading in BMI‐BA matrix of hybrids. For example, the BMI‐BA/A‐CNT hybrid with a desirable amount of A‐CNTs has a higher impact strength than the original BMI‐BA resin, while all BMI‐BA/CNT hybrids have lower impact strength than the original BMI‐BA resin. DMA test shows that all hybrids have somewhat lower storage modulus and glass transition temperature than a pure polymer, which maybe attributed to the fact that both CNTs and A‐CNTs shift the curing peak to a higher temperature range and thus decrease the crosslinking density of networks. Copyright © 2007 John Wiley & Sons, Ltd.     

Characterization of chromium-carbene complexes by high-performance liquid chromatography-mass spectrometry with particle beam interface

High-performance liquid chromatography (HPLC) coupled with mass spectrometric (MS) detection was used to separate and characterize a series of chromium -aminocarbene and alkoxycarbene complexes of the Fischer type, some of which were synthesized as new compounds. Chromium-carbene complexes are known to have interesting photochemical properties. The separation of all the compounds examined was performed under normal-phase conditions and a particle beam LC-MS interface was used. The acquisition of positive-ion and negative-ion chemical ionization mass spectra of the eluates was performed. The use of the LC-PB-MS system demonstrated the potential role of this technique in the elucidation of the structure of polar organometallic compounds, such as the carbene complexes of chromium examined.     

Transition-metal complexes of boron-new insights and novel coordination modes

Since the publication of the last review in 1998, the transition-metal chemistry of boron has continued to raise unceasing interest. Boryl complexes, representing the most extensive subclass, have remained a focus of intense research, particularly for their implication in the metal-mediated functionalization of organic substrates. Absolute novelties such as borane complexes and terminal borylene complexes have been structurally authenticated. Upon further elaboration of these compounds, the known coordination modes of boron-based ligands have grown considerably. Combined structural and theoretical investigations have contributed to elucidate the fundamental electronic characteristics of the transition-metal-boron bond and are leading to applications of these compounds. The most useful synthetic strategies for the generation of transition-metal-boron bonds are highlighted here, and the most recent and intriguing compounds that have been reported are outlined and discussed.     

Processable hybrids of ferrocene-containing poly(phenylacetylene)s and carbon nanotubes: fabrication and properties

A group of ferrocene-containing poly(phenylacetylene)s (PPAs) with different alkyl spacers were synthesized by using organorhodium complexes [Rh(diene)Cl](2) and Rh (+)(nbd)[C(6)H(5)B (-)(C(6)H(5))(3)] as catalysts. With the aid of pi-pi interactions between the walls of carbon nanotubes (CNTs) and the PPA skeleton together with the ferrocene pendants, the polymer (P 1, P2(5) and P2(10)) chains effectively wrapped round the shells of both single-walled carbon nanotubes (SWNTs) and multiwalled carbon nanotubes (MWNTs). The "additive effect" of the PPA skeleton and the ferrocene pendants in dispersing the SWNTs and MWNTs resulted in the generation of highly soluble hybrids. The solubilities of P 1-functionalized SWNTs and MWNTs in tetrahydrofuran (THF) are up to 633 mg/L and 967 mg/L, respectively. They are much higher than the solubilities of M 1-modified SWNTs and MWNTs, which are only 167 mg/L and 133 mg/L in THF. The results indicate the existence of a powerful polymer effect on dispersing CNTs. The high solubilities of the hybrids in organic solvents allowed us to fabricate high-quality and large-area films. Meanwhile, the desirable loading of ferrocene-containing PPAs onto the CNTs offered polymer/CNTs hybrids with multiple redox centers and ferrocene-featured electrochemical properties. The P 1/MWNT hybrid exhibits evident optical-limiting properties. At high incident laser fluence, the optical-limiting power of P 1/MWNT is higher than that of C(60), a well-known optical limiter. Thermal analyses indicate that the decomposition temperatures ( T(d), the temperature at which a sample loses its 5% weight) for P1 and P1/MWNT are 342 and 346 degrees C, respectively, much higher than that for PPA (225 degrees C). Thus the attachment of a ferrocene pendant to a PPA backbone, followed by hybridization with CNTs, improved the thermal stability. Upon pyrolysis, both the polymer and the polymer/CNTs hybrid gave rise to superparamagnetic ceramics; the saturation magnetizations ( M(s)) of the ceramics derived from P1 and P1/MWNT are 29.9 and 26.9 emu/g, respectively. The latter datum is in the list of the best results reported for the magnetic nanocomposites obtained by the attachment of magnetic nanoparticles onto CNTs.     

Improving Thermal and Flame Retardant Properties of Epoxy Resin with Organic NiFe‐Layered Double Hydroxide‐Carbon Nanotubes Hybrids

To improve the dispersion of carbon nanotubes (CNTs) and flame retardancy of layered double hydroxide (LDH) in epoxy resin (EP), organic nickel‐iron layered double hydroxide (ONiFe‐LDH‐CNTs) hybrids were assembled through co‐precipitation. These hybrids were further used as reinforcing filler in EP. EP/ONiFe‐LDH‐CNTs nanocomposites containing 4 wt% of ONiFe‐LDH‐CNTs with different ratios of ONiFe‐LDH and CNTs were prepared by ultrasonic dispersion and program temperature curing. The structure and morphology of the obtained hybrids were characterized by different techniques. The dispersion of nanofillers in the EP matrix was observed by transmission electron microscopy (TEM). The results revealed a coexistence of exfoliated and intercalated ONiFe‐LDH‐ CNTs in polymer matrix. Strong combination of the above nanofillers with the EP matrix provided an efficient thermal and flame retardant improvement for the nanocomposites. It showed that EP/ONiFe‐LDH‐CNTs nanocomposites exhibited superior flame retardant and thermal properties compared with EP. Such improved thermal properties could be attributed to the better homogeneous dispersion, stronger interfacial interaction, excellent charring performance of ONiFe‐LDH and synergistic effect between ONiFe‐LDH and CNTs.     

Lipase active-site-directed anchoring of organometallics: metallopincer/protein hybrids

The work described herein presents a strategy for the regioselective introduction of organometallic complexes into the active site of the lipase cutinase. Nitrophenol phosphonate esters, well known for their lipase inhibitory activity, are used as anchor functionalities and were found to be ideal tools to develop a single-site-directed immobilization method. A small series of phosphonate esters, covalently attached to ECE "pincer"-type d8-metal complexes through a propyl tether (ECE=[C6H3(CH2E)(2)-2,6]-; E=NR2 or SR), were designed and synthesized. Cutinase was treated with these organometallic phosphonate esters and the new metal-complex/protein hybrids were identified as containing exactly one organometallic unit per protein. The organometallic proteins were purified by membrane dialysis and analyzed by ESI-mass spectrometry. The major advantages of this strategy are: 1) one transition metal can be introduced regioselectively and, hence, the metal environment can potentially be fine-tuned; 2) purification procedures are facile due to the use of pre-synthesized metal complexes; and, most importantly, 3) the covalent attachment of robust organometallic pincer complexes to an enzyme is achieved, which will prevent metal leaching from these hybrids. The approach presented herein can be regarded as a tool in the development of regio- and enantioselective catalyst as well as analytical probes for studying enzyme properties (e.g., structure) and, hence, is a "proof-of-principle design" study in enzyme chemistry.     

The first metal complexes of bis(diisopropylamino)carbene: synthesis, structure and ligand properties

The synthesis of rhodium(I) and iridium(I) complexes of the bis(diisopropylamino)carbene is described for the first time. The formamidinium chloride and the free bis(diisopropylamino)carbene (L) were used as consecutive precursor compounds to form the metal complexes. Spectroscopic and, for LRh(cod)Cl, crystallographic data are presented for the complexes LRh(cod)Cl and LIr(cod)Cl (L=bis(diisopropylamino)carbene). The ligand properties of the acyclic bis(diisopropylamino)carbene are compared with imidazolin-2-ylidenes and imidazolidin-2-ylidenes as ligands in related rhodium(I) carbonyl complexes. Bis(diisopropylamino)carbene is the most basic known carbene ligand to date.     

双核大环配合物及其仿生特性

双核大环配合物在模拟金属蛋白活化中心，键合与活化小分子及作为双功能催化剂方面具有广阔应用前景。本文就西夫碱型、串连型、具有“软”、“硬”空腔的单大环、双大环及大多环双核配体及其配合物的性质和它们在仿生方面的研究进展进行综述报道。     

N-heterocyclic carbene complexes of palladium and rhodium: cis/trans-isomers

Stable carbene complexes of palladium or rhodium are readily accessible by (i) reaction of imidazolium or triazolium salts with palladium complexes bearing basic ligands or rhodium alkoxide complexes, (ii) adduct formation of the free carbene, e.g. 1,3-dimethylimidazoline-2-ylidene, with metal compounds. In the case of palladium(II) and rhodium(I), the resulting complexes show cis/trans-isomerization and can be compared to analogous phosphine complexes.     

Fluorophilic properties of (perfluorooctyl)ethyldimethylsilyl substituted and tetramethyl(perfluoroalkyl) substituted cyclopentadienes and their Ti(IV), Rh(III), and Rh(I) complexes

Fluorous partition coefficients in perfluorohexane/toluene system for 37 fluorinated silylcyclopentadienes, titanium(IV) complexes derived from them, perfluoroalkyl substituted tetramethylcyclopentadienes, and their Rh(III) and Rh(I) complexes were determined. Specific fluorophilicity and fluorousness according to Kiss and Rábai were calculated for each compound with the help of molecular volume computed with the Gaussian program. The results show relative unimportance of fluorine content parameter for fluorophilicity as shown by a rhodium(I) complex being fluorophilic at fluorine content as low as 46.3%. As expected, fluorophilicity increased with the fluorous ponytail length and ponytail number in series of similar compounds, whereas polar M-Cl bonds were decreasing it. Fluorophilicities of tetramethyl(perfluoroalkyl)cyclopentadiene tautomers varied considerably despite only small differences in molecular volume being found. Most of the compounds were prepared previously, several new silylcyclopentadienes and titanium(IV) silylcyclopentadienyl complexes are reported here for completion.     

NEMATICIDAL,INSECTICIDAL, ANTIFERTILITY,ANTIFUNGAL AND ANTIBACTERIAL ACTIVITIES OF SALICYLANILIDE SULPHATHIAZOLE AND ITS MANGANESE,SILICON AND TIN COMPLEXES

A facile synthesis and studies on the stereochemistry and biochemical aspects of some organosilicon(IV), organotin(IV), and manganese(II) complexes derived from imine having N^∪N^∪O donor system is reported. The imine was prepared by the condensation of salicylanilide with sulphathiazole. This imine reacts with organosilicon(IV)chloride, organotin(IV)chloride, and hydrated manganese(II) chloride to yield compounds having M─O and M←N bonds. The structures of the compounds have been elucidated by physicochemical and spectral (IR, ¹H NMR, ¹³C NMR, ²⁹Si NMR, ¹¹⁹Sn NMR, and ESR) studies, which clearly point to a trigonal bipyramidal geometry around silicon(IV) and tin(IV), and tetrahedral geometry around manganese(II), as the active lone pair of the nitrogen is also included in the coordination sphere. In the search for better fungicides and bactericides, studies were conducted to assess the growth-inhibiting potential of the synthesized complexes against various pathogenic fungal and bacterial strains. These complexes are highly active against nematode (Meloidogyneincognita) and insect (Trogodermagranarium). The activity will be increased with increasing concentration. These studies demonstrate that the concentrations reached levels that are sufficient to inhibit and kill the pathogens. All compounds have also been found to act as sterilizing agents by reducing the production of sperm in male mice.     

Carbon nanotubes decorated with terpyridine‐ruthenium complexes

Surface functionalization of CNTs (SWCNTs or MWCNTs) with dendronized alkoxy terpyridine‐Ru(II)‐terpyridine complexes has been accomplished using either the “grafting to” or the “grafting from” approaches. Different sets of easily processable hybrid metallo‐CNTs composites have been efficiently synthesized bearing either monomeric or polymeric side chain tpy‐Ru(II)‐tpy dicomplexes. Their characterization through TGA, UV‐Vis, and Raman techniques revealed various modification degrees depending on the methodology employed. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2551–2559, 2009     

Deprotonative metalation using ate compounds: synergy, synthesis, and structure building

Historically, single-metal organometallic species such as organolithium compounds have been the reagents of choice in synthetic organic chemistry for performing deprotonation reactions. Over the past few years, a complementary new class of metalating agents has started to emerge. Owing to a variable central metal (magnesium, zinc, or aluminum), variable ligands (both in their nature and number), and a variable second metallic center (an alkali metal such as lithium or sodium), "ate" complexes are highly versatile bases that exhibit a synergic chemistry which cannot be replicated by the homometallic magnesium, zinc, or aluminum compounds on their own. Deprotonation accomplished by using these organometallic ate complexes has opened up new perspectives in organic chemistry with unprecedented reactivities and sometimes unusual and unpredictable regioselectivities.     

Review: Graphene-supported coordination complexes and organometallics: properties and applications

Recent advances in the functionalization of graphene (G) and graphene oxide (GO) using classical coordination complexes, as well as σ- and π-organometallic compounds as precursors, are discussed. Graphene can form hybrids via covalent or non-covalent interactions with metal complexes of carboxylates, amines, polypyridine compounds, a host of N,O-containing ligands, porphyrins, phthalocyanines, carbonyls, cyclopentadienyls, pyrene-containing moieties, and other aromatic structures. The hybrid constructs are interesting for applications in catalysis, energy storage, and corrosion inhibition and present interesting possibilities of modulating the electronic structure of graphene.     

Catalytic hydrogenation of aromatic nitro compounds by non-noble metal complexes of chitosan

Silica-supported mono-metal (such as Ni, Cu) complexes and mixed metal (such as Cu/Zn, Cu/Cr) complexes of chitosan have been prepared. It is found that these non-noble metal complexes could be used as efficient catalysts for the hydrogenation of aromatic nitro compounds. The effects of type of metal, reaction temperature and pressure, solvent, nitrogen/metal molar ratio in the complex catalysts on the yields from nitrobenzene to aniline have been examined. It was also found that catalysts are active for the catalytic hydrogenation of other aromatic nitro compounds such as 2-nitroanisole, 2-nitroaniline, 2-nitrotoluene and 1-chloro-4-nitrobenzene.     

Electrospray ionization mass spectrometric study of 1,3,4-oxadiazole–copper complexes

The complexes of 2,5-disubstituted-1,3,4-oxadiazoles, namely 2,5-diphenyl-1,3,4-oxadiazole (1), 2,5-bis(2-pyridyl)-1,3,4-oxadiazole (2) and 2,5-bis(4-pyridyl)-1,3,4-oxadiazole (3), with copper cation were studied by electrospray ionization mass spectrometry (ESI-MS). The ability of the compounds studied to form complexes with copper (under the ESI conditions) can be ordered as 2 > 1 > 3. The compounds studied tend to form both 1 : 1 and 2 : 1 chelate complexes with both copper(II) and copper(I). The complexes with copper(I) are formed in the ESI process. The influence of solvent polarity, solution flow-rate, counter ions (Cl⁻, NO₃⁻, CH₃COO⁻, SO₄²⁻, acetylacetonates) on the type of the ions observed was studied. Copyright © 2004 John Wiley & Sons, Ltd.     

Electron-Rich Half-Sandwich Complexes—Metal Bases par excellence

Electron-rich, half-sandwich complexes of the type C_nR_nML₂ or C_nR_nMLL′ are built up of an aromatic five- or six-membered ring, a d⁸-metal, and either a pair of two-electron donors or an equivalent chelating ligand. Such complexes behave like Lewis bases and react with a wide variety of electrophiles, El or ElX, to form products with a new metal-element bond. According to their reactivity they are comparable to the Vaska-type compounds. Certain of the products obtained after addition of the electrophile undergo interesting subsequent reactions in which, for example, metal complexes containing molecules that are unstable in the free state, such as CS, CSe, CH₂S, CH₂Se, CH₂Te, CH₃CHS, CH₃CHSe, CH₂?C?S, CH₂?C?Se, and CH₂?C?Te are formed. Moreover, cycloadditions as well as reactions with coordinatively unsaturated transition-metal compounds which result in formation of heterometal binuclear complexes demonstrate that the metal bases C_nR_nML₂ and C_nR_nMLL′ are valuable synthetic building blocks. Furthermore, very recent investigations have indicated links between metal basicity and the problem of C? H activation.     

Analytical Application of the Binary and Ternary Complexes of 2,10-Disubstituted Phenothiazines

Abstract

Phenothiazines (PT) are an important family of compound from a medical point of view. They are widely used among the tricyclic antidepressants. Their application in therapy requires methods for their determination in pharmaceuticals and body fluids. The extractive-spectrophotometric methods are very useful for these determinations. They are based on the formation of the binary and ternary complexes. Phenothiazines react with some organic substances (e.g., picric acid, alizarin S, bromocresol green, and triphenylmethane dyes) as well as with thiocyanate or halide complexes of metals [e.g., Co(II), Pd(II), Fe(III), Cr(III), Au(III), Ti(IV), Pt(IV), Mo(V), W(V), U(VI)] forming well-defined ion-association compounds. The compounds are sparingly soluble in water but quantitatively extracted from the aqueous phase into organic solvents. The extracts are intensely colored and stable for a few days. These properties are the basis for utilizing the binary and ternary complexes of phenothiazines in chemical and pharmaceutical analysis. This review described the analytical application of these complexes.     

Darstellung und NMR-spektroskopische Charakterisierung von konfigurationsstabilen Diorganozinn(IV)-Komplexen RPhSnL mit Zinn als chiralem Zentrum

Synthesis and Characterization of Configurationally Stable Diorganotin(IV) Complexes with Tin as a Chiral Centre Contrary to the high optical stability of tetraorganotin compounds most heteroleptic organic tin compounds are configurationally instable. We report the synthesis and the characterization of some new enantiomeric and diastereomeric diorganotin(IV) complexes of stable configuration with tin as a chiral centre. The stabilization of the chiral tin atom was realized by complexation with tridentate diacidic esterhydrazone ligands H₂L, which prevent an interconversion at the stereogenic centre. Multinuclear NMR-studies in solution demonstrate, that the configuration of the chiral tin center is configurationally stable up to 160°C. The molecular structure of the complexes Neophyl-phenyl-tin-2[(2-methyl-mercaptothiocarbonyl)-hydrazono]propionate II b and (2-Methyl-butyl-1-yl)-phenyl-tin-[S-methyl-β-N-(2-salicylmethylidene)thiocarbazat] III g have been determined by single crystal X-ray diffraction analysis.