Designing of Optical Fiber Sensing Probe

Evanescent wave configuration has been extensively used in the development of fiber-optic sensor for different biomedical applications. In the present investigation we have theoretically proposed the designing of single-mode and multimode optical fiber sensing probes, which can be prepared by removing a few centimeters of cladding near the distal end of the step index optical fiber. In this theoretical study, we found that the removal of cladding causes V-number mismatching and this has led to the loss of signal acquisition from the sensing region. Therefore, to minimize these losses we have proposed to reduce the radius by step etch and tapering technique. It was found that step etching and tapering enhances the strength and penetration depth of the evanescent wave significantly.     

分立式与分布式光纤传感关键技术研究进展

光纤传感技术已广泛应用于航空航天、石油化工、电子电力、土木工程、生物医药等领域,其技术形式主要体现为分立式和分布式.分立式光纤传感技术利用光纤敏感器件作为传感器来感知被测参量的变化,光纤作为光信号的传输通道连接光纤传感器及后端的解调装置;分布式光纤传感系统基于光纤瑞利散射、拉曼散射或布里渊散射等光学效应,利用光纤本身作为传感器,可对沿途的光信号进行大范围、长距离传感.本文介绍了分立式与分布式光纤传感中主要关键技术的研究进展,并对未来的研究和发展方向进行了探讨.     

Optical Fiber Sensor Technology in Portugal

Abstract

A general overview of the R&D activity in fiber optic sensing developed over the last fifteen years in Portugal is given. Different topics are addressed, including interferometric, intensity and Bragg grating based fiber optic sensors, signal processing and multiplexing techniques, optical current sensors, together with some references to field trials and applications. Possible guidelines for present and future national R&D activity on this subject are outlined.     

Intermodal interference of LP0j modes in optical fiber with liquid core

We present intermodal interference of modes LP_0j in silica optical fiber with liquid core. An appropriate detection method is proposed for observation of intermodal interference of LP_0j modes. Measured spectral dependencies reveal a clear local minimum, where position is a function of optical fiber parameters. We focused on investigation of dependence of that minimum position on length of optical fiber with liquid core. From measured spectral dependencies the evident blue shift of local minimum is observed as length of optical fiber increases. Character of spectral characteristics correspond with intermodal interference of modes LP_0j and is demonstrated by numerical calculations. Presented intermodal interference in combination with liquid-filled core of optical fiber can be attractive for sensing applications.     

Bidirectional Wavelength Reconfigurable Module Based on Tunable Fiber Bragg Grating and Remote Pump Amplifier

Abstract

This article presents a novel bidirectional wavelength reconfigurable optical network utilizing a remotely pumped erbium-doped fiber amplifier and tunable fiber Bragg gratings. The system is experimentally demonstrated at a 10-Gb/s per channel over 20-km fiber span that verifies the metro-network range system performance. The achieved power penalty is less than 1 dB when compared to the back-to-back transmission link. An example of practical application where the proposed module is used as an add/drop multiplexer and a remote node in the bidirectional wavelength division multiplexing passive optical network system is described.     

Full-Duplex Link Providing Alternative Wired and Wireless Broadband Access for the Wavelength-Division Multiplexing Passive Optical Network with a Uniform Converged Signal Format

Abstract

A full-duplex link implementing alternative wired and wireless access for wavelength-division multiplexing passive optical network is proposed with the uniformed three-tone converged optical signal, which provides a wired or wireless downlink access signal alternatively and an uplink optical carrier. The uplink optical carrier reversed by the converged optical signal makes the hybrid optical node unit free from the optical source. The simulation results show that the full-duplex link with a 10-Gb/s 16-quadrature amplitude modulation (16-QAM) downstream and 5 Gb/s binary upstream can provide both wired access with a bit-error rate below 10^?9 and radio-over-fiber-based wireless access with a bit-error rate below 10^?7 over 40 km of fiber without an optical source and optical amplifier in the hybrid optical node unit.     

Luminescence-Based Optical Fiber Chemical Sensors

Abstract

A scheme for the simultaneous determination of temperature and analyte concentration for application in luminescence-based chemical sensors is proposed. This scheme is applied to an optical oxygen sensor, which is based on the quenching of the fluorescence of a ruthenium complex. Temperature measurement is performed using the excitation radiation and an absorption long-pass filter. Preliminary results are presented that show the viability of an oxygen measurement that is independent of temperature and optical power level. The possibility of self-referenced temperature measurements with semiconductor nanoparticles is also investigated. In order to optimize the sensor design, several different optical fiber probe geometries for oxygen sensing are tested and compared, including different methods of coupling radiation into the optical fiber system. Polyvinyl alcohol (PVA) and polyacrylamide membranes are tested as supports for sensor immobilization in fiber-optical pH sensing devices in aqueous solution. Some results are presented that show the feasibility of using fiber-optical pH indicators for remote monitoring.     

Efficient Technique to Control the Zero-Dispersion Wavelength of a Microstructured Optical Fiber

Abstract

An efficient technique to control the zero-dispersion wavelength of a microstructured optical fiber is proposed and numerically demonstrated in this article. This technique is based on the variation of the linear refractive index and the thickness of a thin film covering the microstructured optical fiber holes' inner surfaces. A powerful and accurate code based on a full-vector finite-element method formulation in conjunction with perfectly matched layers was used. A maximum of 570-nm zero-dispersion wavelength displacement is demonstrated. This thin film can be included after the microstructured optical fiber has been fabricated, as that means the zero dispersion of such fiber can be tailored as needed.     

A Single-Star Multi-Ring Structure of Self-Healing Wavelength Division Multiplexing Optical Access Network

Abstract

A simple single-star multi-ring structure of multi-wavelength optical access network for enlarging network scale and protecting distribution fiber is presented. In this scheme, the ring structure enables optical network units to switch automatically to a protection link when the distribution fiber fails, and a star structure is adopted to weaken the sphere of the distribution fiber failure's influence. The simple combination of these two structures greatly increases the number of subscribers and minimizes costs of network. The network's survivability can also be better than that of a star network or ring network. In addition, it can easily be upgraded from an existing star network, so this article also proposes a method to update the existing star network. The simulation result shows the structure is of good performance.     

A Surface Mounting Embedded Optical Transceiver with Bi-Directional Data Rate of Eight Channels × 10 Gbps

Abstract

The bi-directional data rate is investigated of an eight-channel × 10-Gbps optical transceiver with a size of 15 mm × 15 mm × 6 mm and ball grid array package form that was designed and fabricated. A passive optical coupling method is designed based on a coupling lens array, which is transformed to substrate through a carrier. This electrical performance is characterized through a 3D full wave simulation and shows great advantages compared with traditional pluggable optical transceivers. Experimental eye diagram measurement in loop-back mode via a 2-m-long multi-mode fiber array shows an eye width of 51.984 ps at a bit-error rate order of 10^?12, which proves the transceiver's ability for 10.3125-Gbps data transmission.     

An Extrinsic Fabry–Perot Optical Fiber Sensor Based on Nano-Magnetic Fluid

Abstract

An extrinsic Fabry–Perot optical fiber sensor based on nano-magnetic fluid and a Fabry–Perot interference is presented for magnetic field measurement. The sensing fiber end is coated with a thin film of SU-8 photoresist; immersing it into a nano-magnetic fluid forms a magnetic-field-dependent extrinsic Fabry–Perot interference. The relationship between the fringe contrast and magnetic field is analyzed in different concentrations of the magnetic fluid, and the concentration of 25% is most suitable for the measurement of the magnetic field intensity. The stability of the sensor is also addressed.     

Ultra-High-Capacity Passive Optical Network Systems with Free-Space Optical Communications

Abstract

This article experimentally demonstrates a hybrid fiber–free-space passive optical network that enables high spectral density, aggregated capacity, and total throughput through ultra-dense wavelength-division multiplexing baseband and radio-over-fiber channels. Ultra-dense wavelength-division multiplexing 10-Gb/s Nyquist-shaped 16-ary quadrature amplitude modulation, 10-Gb/s radio-over-fiber orthogonal frequency-division multiplexing, and 8.75-Gb/s baseband orthogonal frequency-division multiplexing signals per user were transmitted through a maximum 40-km passive optical network, which includes a 6-m free-space optics link with acceptable performance.     

Beyond 90-km Reach of a 16 × 2.5 Gb/s C/L-band Dense Wavelength-Division Multiplexing Metropolitan Network Based on Self-Seeded Reflective Semiconductor Optical Amplifiers

Abstract

This article reports the operation of a cost-effective, colorless, dense wavelength-division multiplexing metropolitan network based on self-seeded reflective semiconductor optical amplifiers. All reflective semiconductor optical amplifiers used in the experiments are packaged in commercial small form-factor pluggable modules. The proposal architecture is simple and symmetric thanks to utilization of two cyclic array waveguide gratings. Downstream link functions in the C-band wavelength range and the upstream link functions in the L-band wavelength range. By using erbium-doped fiber amplifiers to extend the reach, an error-free transmission over 90 km for 16 channels at 2.5 Gb/s was experimentally demonstrated for both directions, and an optical budget over 35 dB was obtained.     

Single laser beam fiber optic trap

Optical forces acting on a sphere were experimentally analyzed to investigate the single-beam fiber optic trap using a cleaved optical fiber or a lensed optical fiber. A stable optical trap could be created at the point where the x-directed (horizontal) optical forces were precisely balanced, and the vector sum of axial and transverse forces acting on a sphere gave a restoring force directed back to the stable point. As compared with other embodiments, such as a single-beam gradient trap (optical tweezers) and dual-beam fiber optical traps, this single-beam fiber optic trapping was most economical, much simpler to operate, and required relatively low optical power to capture an object. Furthermore, a lensed optical fiber could easily trap and manipulate a micro object in comparison with a cleaved optical fiber because of the strong transverse optical confinement.     

Relative Intensity Noise in Optical Single Side Band Systems with Multiple In-Line Amplifiers: Analysis and Validation

Abstract

This article analyzes and validates through simulation the influence of fiber nonlinearity, dispersion, and loss on the Relative Noise Intensity (RIN) spectrum at fiber output in externally modulated optical single side band (OSSB) systems. The analysis includes the RIN generated by the laser source, the effect of the OSSB modulator, and noise generated by the in-line optical amplifiers. The analysis takes into account conversion between phase noise and intensity noise introduced by fiber transmission. It is shown that, depending on the operating conditions, the system performance may be predominantly affected either by the laser RIN or by the noise generated by the in-line optical amplifiers. The impact of the OSSB modulator can be relevant when the RIN of the system is dominated by the laser noise and should therefore be considered.     

基于TTDF和CNS算法的多路BOTDR散射谱信息高精度分析研究

传统的BOTDR光纤传感系统采用单路传感光纤实现对信息特征的测量,交叉敏感等不可控因素会使散射谱拟合精度较低,信息分析偏差较大。设计了一种同时对多路传感信息进行检测的BOTDR系统。针对基于布里渊光时域反射(BOTDR) 的多路传感散射谱高精度特征提取的要求,提出了一种三次数据融合(TTDF)与布谷鸟牛顿搜索(CNS)相结合的散射谱信息分析方法。该方法利用TTDF对信息数据的融合能力,根据狄克逊准则和格拉布斯准则,剔除了异常值的影响,减小了传感信号的误差;采用布谷鸟牛顿搜索算法进行频谱拟合,不仅通过布谷鸟的智能搜索能力得到全局最优解,而且以该最优解作为牛顿算法的初值进行局部寻优,保证了频谱拟合的精度,提高了布里渊散射谱信息分析的准确度。在温度信息散射谱线性权重比为1∶9的情况下,分析了不同线宽散射谱信息的提取。采用该方法进行多路数据融合的方差约为0.003 0,散射谱的中心频率约为11.213 GHz,温度误差小于0.15 K。理论分析和仿真结果表明,将此方法用于基于布里渊光时域反射的多路分布式光纤传感系统,可有效提高多路传感信号的准确度和布里渊散射谱信息分析的精确度。     

基于光纤反射腔的高灵敏电流传感器方案

提出了一种基于平面Y分支波导与法拉第旋镜的高灵敏度光纤电流传感器结构方案。利用两个法拉第旋镜与平面Y分支波导构成一个光纤反射腔,通过光在腔中的多次反射来增加待测电流导致的传感光纤中的法拉第相移,从而实现对微弱电流的测量。该结构方案中首次采用了平面Y分支光波导,从而可降低光路系统损耗,增加灵敏度,为微弱电流测量的工程化提供了一种可行的方法。     

采用密集波分复用技术的光纤水听器阵列研究

利用密集波分复用和时分多路复用技术相结合的大规模阵列结构,以Mach-Zehnder干涉型光纤水听器为例,分析了采用相位产生载波技术的频分多路复用,提出了密集波分复用技术在干涉型光纤水听器阵列应用的新方法,给出了复用体系结构,并分析了其在工程上可行性.     

O-Band 10-Gb/s Operation of a Reflective Semiconductor Optical Amplifier Based Self-Seeded Transmitter for Optical Access Applications

Abstract

New applications are emerging in the optical access for wavelength-division multiplexed passive optical network colorless transmitters based on a reflective semiconductor optical amplifier. Previous works have shown that 10-Gb/s operation can be reached in the C-band with such transmitters, yet trade-offs are necessary for chromatic dispersion and, consequently, link length enters the equation. Such impairments are discussed using both experimental data and simulation results. New experimental data with interesting performance in the O-band are also presented.