Effects of heavy-ion irradiation on the electrical properties of rf-sputtered HfO2 thin films for advanced CMOS devices

HfO₂-based metal-oxide semiconductor (MOS) capacitors were irradiated with high-energy ion beam to study the irradiation effects in these films. HfO₂ thin films deposited by radio frequency (rf)-sputtering were irradiated with 80 MeV O⁶⁺ ions. The samples were irradiated and characterized at room temperature. Devices were characterized via 1 MHz capacitance–voltage (C?V) measurements using the midgap method. The irradiation induced dispersion in accumulation and depletion regions with increasing fluence is observed. After irradiation, the midgap voltage shift (Δ V _mg) of?0.61 to?1.92 V, flat band voltage shift (Δ V _fb) of?0.48 to?2.88 V and threshold voltage shift (Δ V _th) of?0.966 to?1.96 V were observed. The change in interface trap charge and oxide trap charge densities after 80 MeV O⁶⁺ ions irradiation with fluences were determined from the midgap to flat band stretch out of C?V curves. The results are reported and explained in terms of changes in microstructure and dielectric properties of the HfO₂ thin films after irradiation.     

Temperature-dependent current conduction mechanism and charge trapping in Ta2O5 RF-sputtered on GaN

A gallium nitride (GaN) based Metal-Oxide-Semiconductor (MOS) capacitor was fabricated using radio frequency (RF)-sputtered tantalum oxide (Ta₂O₅) as the high-k gate dielectric. Electrical characteristics of this capacitor were evaluated via capacitance–voltage (C–V), current–voltage (I–V), and interface trap density (D_it) measurements with emphasis on the substrate temperature dependence ranging from 25 °C to 200 °C. Charge trapping and conduction mechanism in Ta₂O₅ were investigated. The experimental results suggested that higher substrate temperature rendered higher oxide capacitance, reduced gate leakage current, and lowered mid-gap interface trap density at the expenses of high border traps and high fixed oxide charges. The gate leakage current through Ta₂O₅ was found to obey the Ohm's conduction at lower gate bias and the Poole–Frenkel conduction at higher gate bias.     

Fabrication and characterization of La-doped HfO2 gate dielectrics by metal-organic chemical vapor deposition

La-doped HfO₂ gate dielectric thin films have been deposited on Si substrates using La(acac)₃ and Hf(acac)₄ (acac = 2,4-pentanedionate) mixing sources by low-pressure metal-organic chemical vapor deposition (MOCVD). The structure, thermal stability, and electrical properties of La-doped HfO₂ films have been investigated. Inductive coupled plasma analyses confirm that the La content ranging from 1 to 5 mol% is involved in the films. The films show smaller roughness of ∼0.5 nm and improved thermal stability up to 750 °C. The La-doped HfO₂ films on Pt-coated Si and fused quartz substrates have an intrinsic dielectric constant of ∼28 at 1 MHz and a band gap of 5.6 eV, respectively. X-ray photoelectron spectroscopy analyses reveal that the interfacial layer is Hf-based silicate. The reliable value of equivalent oxide thickness (EOT) around 1.2 nm has been obtained, but with a large leakage current density of 3 A/cm² at V_g = 1V + V_fb. MOCVD-derived La-doped HfO₂ is demonstrated to be a potential high-k gate dielectric film for next generation metal oxide semiconductor field effect transistor applications.     

Al2O3介质层厚度对AlGaN/GaN金属氧化物半导体-高电子迁移率晶体管性能的影响

在蓝宝石衬底上采用原子层淀积法制作了三种不同Al₂O₃介质层厚度的绝缘栅高电子迁移率晶体管.通过对三种器件的栅电容、栅泄漏电流、输出和转移特性的测试表明：随着Al₂O₃介质层厚度的增加,器件的栅控能力逐渐减弱,但是其栅泄漏电流明显降低,击穿电压相应提高.通过分析认为薄的绝缘层能够提供大的栅电容,因此其阈值电压较小,但是绝缘性能较差,并不能很好地抑制栅电流的泄漏;其次随着介质厚度的增加,可以对栅极施加更高的正偏压,因此获 关键词： 2O₃')" href="#">Al₂O₃ 金属氧化物半导体-高电子迁移率晶体管 介质层厚度 钝化     

Implementation of nanoscale circuits using dual metal gate engineered nanowire MOSFET with high-k dielectrics for low power applications

This work covers the impact of dual metal gate engineered Junctionless MOSFET with various high-k dielectric in Nanoscale circuits for low power applications. Due to gate engineering in junctionless MOSFET, graded potential is obtained and results in higher electron velocity of about 31% for HfO₂ than SiO₂ in the channel region, which in turn improves the carrier transport efficiency. The simulation is done using sentaurus TCAD, ON current, OFF current, I_ON/I_OFF ratio, DIBL, gain, transconductance and transconductance generation factor parameters are analysed. When using HfO₂, DIBL shows a reduction of 61.5% over SiO₂. The transconductance and transconductance generation factor shows an improvement of 44% and 35% respectively. The gain and output resistance also shows considerable improvement with high-k dielectrics. Using this device, inverter circuit is implemented with different high-k dielectric material and delay have been decreased by 4% with HfO₂ when compared to SiO₂. In addition, a significant reduction in power dissipation of the inverter circuit is obtained with high-k dielectric Dual Metal Surround Gate Junctionless Transistor than SiO₂ based device. From the analysis, it is found that HfO₂ will be a better alternative for the future nanoscale device.     

Investigation of the interface trap density and series resistance of a high-k HfO2-based MOS capacitor: before and after 50 MeV Li3+ ion irradiation

This is the first investigation on the effects of 50 MeV Li³⁺ ions on interface trap density (D _it) and series resistance (R _s), which reveal the improvement of the dielectric properties of RF-sputtered HfO₂-metal oxide semiconductor (MOS) capacitors. The samples were irradiated and characterized at room temperature. The D _it and R _s were determined from the capacitance–voltage (C–V) and conduction–voltage (G–V) characteristics at 1 MHz. The measured capacitance and conductance were corrected for series resistance. It is found that the series resistance of Al/HfO₂/p? Si MOS capacitors increases with ion fluence, calculated at a strong accumulation region before and after irradiation. The interface state density of MOS devices before and after irradiation is found to decrease with increasing ion fluence.     

AlGaN/GaN MIS-HEMT using NbAlO dielectric layer grown by atomic layer deposition

We present an AlGaN/GaN metal-insulator-semiconductor high electron mobility transistor (MIS-HEMT) with an NbAlO high-k dielectric deposited by atomic layer deposition (ALD).Surface morphology of samples are observed by atomic force microscopy (AFM),indicating that the ALD NbAlO has an excellent-property surface.Moreover,the sharp transition from depletion to accumulation in capacitance-voltage (C-V)curse of MIS-HEMT demonstrates the high quality bulk and interface properties of NbAlO on AlGaN.The fabricated MIS-HEMT with a gate length of 0.5 μm exhibits a maximum drain current of 960 mA/mm,and the reverse gate leakage current is almost 3 orders of magnitude lower than that of reference HEMT.Based on the improved direct-current operation,the NbAlO can be considered to be a potential gate oxide comparable to other dielectric insulators.     

Preparation and characterization of semiconductor GNR-CNT nanocomposite and its application in FET

So far, little is known about the experimental potential of graphene nanoribbon-carbon nanotube (GNR-CNT) heterostructure as a semiconductor nanocomposite. The present work examined the structural features, topography and electronic properties of GNR-CNT nanocomposite by using Raman spectroscopy, transmission electron microscopy, scanning tunneling microscopy and spectroscopy (STS). The homogenous semiconductor GNR-CNT nanocomposites were produced under optimized synthesis conditions. The narrow band gap was exhibited by optimization of the reduction step. The STS of the micro-scale surface of the nanocomposite shows local density of state in selected areas that represent the 0.08 eV band gap of a homogenous nanocomposite. The potential of the semiconductor nanocomposite was considered for application in stacked graphene nanoribbon-field effect transistors (SGNR-FETs). A simple method of device fabrication is proposed based on a semiconductor stacked GNR nanocomposite. The high hole mobility and rectifying effect of the p–n junction of the SGNR nanocomposite on TiO₂ are demonstrated. The optimal thickness for the back gate TiO₂ dielectric for the tested devices was 40 nm. This thickness decreased leakage current at the p–n junction of the SGNR/TiO₂ interface, which is promising heterojunction for optoelectronics. The thickness of gate dielectric and quantum capacitance of the gate was investigated at the low 40 nm thickness by calculating the mobility. In the proposed SGNR-FET, holes dominate electrical transport with a high mobility of about 1030 cm²/V s.     

高k介质在新型半导体器件中的应用

当CMOS器件特征尺寸缩小到45 nm以下, SiO₂作为栅介质材料已经无法满足性能和功耗的需要, 用高 k材料替代SiO₂是必然选择. 然而, 由于高 k材料自身存在局限性, 且与器件其他部分的兼容性差, 产生了很多新的问题如界面特性差、 阈值电压增大、 迁移率降低等. 本文简要回顾了高 k栅介质在平面型硅基器件中应用存在的问题以及从材料、 结构和工艺等方面采取的解决措施, 重点介绍了高k材料在新型半导体器件中的应用, 并展望了未来的发展趋势.     

Effect of UV lamp irradiation during oxidation of Zr/Pt/Si structure on electrical properties of Pt/ZrO2/Pt/Si structure

Metal-insulator-metal (MIM) capacitors were fabricated using ZrO₂ films and the effects of structural and native defects of the ZrO₂ films on the electrical and dielectric properties were investigated. For preparing ZrO₂ films, Zr films were deposited on Pt/Si substrates by ion beam deposition (IBD) system with/without substrate bias voltages and oxidized at 200 °C for 60 min under 0.1 MPa O₂ atmosphere with/without UV light irradiation (λ = 193 nm, Deep UV lamp). The ZrO₂(∼12 nm) films on Pt(∼100 nm)/Si were characterized by X-ray diffraction pattern (XRD), field emission scanning electron microscopy (FE-SEM) and high-resolution transmission electron microscopy (HRTEM), capacitance-voltage (C-V) and current-voltage (I-V) measurements were carried out on MIM structures. ZrO₂ films, fabricated by oxidizing the Zr film deposited with substrate bias voltage under UV light irradiation, show the highest capacitance (784 pF) and the lowest leakage current density. The active oxygen species formed by UV irradiation are considered to play an important role in the reduction of the leakage current density, because they can reduce the density of oxygen vacancies.     

Optical and electrical properties of plasma-oxidation derived HfO2 gate dielectric films

High-k gate dielectric HfO₂ thin films have been deposited on Si(1 0 0) by using plasma oxidation of sputtered metallic Hf thin films. The optical and electrical properties in relation to postdeposition annealing temperatures are investigated by spectroscopic ellipsometry (SE) and capacitance-voltage (C-V) characteristics in detail. X-ray diffraction (XRD) measurement shows that the as-deposited HfO₂ films are basically amorphous. Based on a parameterized Tauc-Lorentz dispersion mode, excellent agreement has been found between the experimental and the simulated spectra, and the optical constants of the as-deposited and annealed films related to the annealing temperature are systematically extracted. Increases in the refractive index n and extinction coefficient k, with increasing annealing temperature are observed due to the formation of more closely packed thin films and the enhancement of scattering effect in the targeted HfO₂ film. Change of the complex dielectric function and reduction of optical band gap with an increase in annealing temperature are discussed. The extracted direct band gap related to the structure varies from 5.77, 5.65, and 5.56 eV for the as-deposited and annealed thin films at 700 and 800 °C, respectively. It has been found from the C-V measurement the decrease of accumulation capacitance values upon annealing, which can be contributed to the growth of the interfacial layer with lower dielectric constant upon postannealing. The flat-band voltage shifts negatively due to positive charge generated during postannealing.     

On the interface states and series resistance profiles of (Ni/Au)–Al0.22Ga0.78N/AlN/GaN heterostructures before and after 60Co (γ-ray) irradiation

The values of interface states (N _SS) and series resistance (R _S) of (Ni/Au)–Al_0.22Ga_0.78N/AlN/GaN heterostructures were obtained from admittance and current–voltage measurements before and after 250 kGy ⁶⁰Co irradiation. The analyses of these data indicate that the values of capacitance and conductance decrease, as the R _S increases with increasing dose rate due to the generation of N _SS. The increase in R _S with increasing dose rate was attributed to two main models. According to the first model, it has been attributed to a direct decrease in the donor concentration in semiconductor material as a result of the elimination of shallow donor states. According to the second model, it is a result of irradiation because of the formation of deep acceptor centers in the semiconductor bulk, and electrons from the shallow donor centers are captured by these acceptors.     

Al2O3绝缘层的AlGaN/GaN MOSHEMT器件研究

在研制AlGaN/GaN HEMT器件的基础上,采用ALD法制备了Al₂O₃ AlGaN/GaN MOSHEMT器件.通过X射线光电子能谱测试表明在AlGaN/GaN异质结材料上成功淀积了Al₂O₃薄膜.根据对HEMT和MOSHEMT器件肖特基电容、器件输出以及转移特性的测试进行分析发现：所制备的Al₂O₃薄膜与AlGaN外延层间界面态密度较小,因而MOSHEMT器件呈现出较 关键词： 2O₃')" href="#">Al₂O₃ ALD GaN MOSHEMT     

Dielectric constant and current transport for HfO2 thin films on ITO

The dielectric constant and leakage current mechanisms for HfO₂ thin films deposited on indium–tin–oxide using reactive rf sputtering deposition were examined. Indium–tin–oxide was selected as the bottom metal as it is of interest as an electrode in transparent field-effect transistor development. The dielectric constant of HfO₂ films was approximately 20 and did not vary significantly with deposition conditions. Temperature-dependent leakage current measurements indicate that Schottky emission is the dominant transport mechanism in films deposited at low temperature and/or low oxygen pressure. The HfO₂/indium–tin–oxide barrier height was extracted to be 1.1±0.2 eV. Films deposited at high temperature and/or oxygen pressure deviate from the Schottky emission model, presumably due to the formation of polycrystalline material with grain boundary conduction. PACS  73.61.Ng; 73.50.Lw; 77.55.+f     

Comparative study of pulsed laser deposited HfO2 and Hf–aluminate films for high-k gate dielectric applications

The thermal stability and the electrical properties of HfO₂ and Hf–aluminate films prepared by the pulsed laser deposition technique have been investigated by X-ray diffraction, differential thermal analysis, capacitance–voltage correlation, leakage-current measurements and high-resolution transmission electron microscopy observation, respectively. A crystallization transformation from HfO₂ amorphous phase to polycrystalline monoclinic structure occurs at about 500 °C. In contrast, the amorphous structure of Hf–aluminate films remains stable at higher temperatures up to 900 °C. Rapid thermal annealing at 1000 °C for 3 min leads to a phase separation in Hf–aluminate films. Tetragonal HfO₂(111) is predominant, and Al₂O₃ separates from Hf–aluminate and is still in the amorphous state. The dielectric constant of amorphous HfO₂ and Hf–aluminate films was determined to be about 26 and 16.6, respectively, by measuring a Pt/dielectric film/Pt capacitor structure. A very small equivalent oxide thickness (EOT) value of 0.74 nm for a 3-nm physical thickness Hf–aluminate film on a n-Si substrate with a leakage current of 0.17 A/cm² at 1-V gate voltage was obtained. The interface at Hf–aluminate/Si is atomically sharp, while a thick interface layer exists between the HfO₂ film and the Si substrate, which makes it difficult to obtain an EOT of less than 1 nm. PACS 77.55.+f; 81.15.Fg; 73.40.Qv     

Swift ion irradiation effect on high-k ZrO2- and Al2O3-based MOS devices

This paper describes the heavy ion-induced effects on the electrical characteristics of reactively sputtered ZrO₂ and Al₂O₃ high-k gate oxides deposited in argon plus nitrogen containing plasma. Radiation-induced degradation of sputtered high-k dielectric ZrO₂/Si and Al₂O₃/Si interface was studied using 45?MeV Li³⁺ ions. The devices were irradiated with Li³⁺ ions at various fluences ranging from 5?×?10⁹ to 5?×?10¹²?ions/cm². Capacitance–voltage and current–voltage characteristics were used for electrical characterization. Shift in flat band voltage towards negative value was observed in devices after exposure to ion radiation. Post-deposition annealing effect on the electrical behavior of high-k/Si interface was also investigated. The annealed devices showed better electrical and reliability characteristics. Different device parameters such as flat band voltage, leakage current, interface defect density and oxide-trapped charge have been extracted.The surface morphology and roughness values for films deposited in nitrogen containing plasma before and after ion radiation are extracted from Atomic Force Microscopy.     

Pulsed laser deposition of aluminate YAlO3 and LaAlO3 thin films for alternative gate dielectric applications

Amorphous aluminate YAlO₃ (YAO) thin films on n-type silicon wafers as gate dielectric layers of metal–oxide–semiconductor devices are prepared by pulsed laser deposition. As a comparison, amorphous aluminate LaAlO₃ (LAO) thin films are also prepared. The structural and electrical characterization shows that the as-prepared YAO films remain amorphous until 900 °C and the dielectric constant is ∼14. The measured leakage current of less than 10^-3 A/cm² at a bias of V_G=1.0 V for ∼40-nm-thick YAO and LAO films obeys the Fowler–Nordheim tunneling mechanism. It is revealed that the electrical property can be significantly affected by the oxygen pressure during deposition and post rapid thermal annealing, which may change the fixed negative charge density at the gate interface. PACS 77.55.+f; 81.15.Fg; 81.40.Ef     

Dielectric properties of ferroelectric/DMS heterointerface using YMnO3 and Ce doped Si

Bottom gate type Al/Si:8.2 at%Ce/YMnO₃/Pt capacitor was fabricated. Although it was polycrystalline, we successfully obtained Si:8.2 at%Ce film on ferroelectric YMnO₃. The dielectric properties of the capacitor were carefully investigated. Although the capacitance shows frequency dispersion, the capacitor exhibits a ferroelectric type C-V hysteresis loop. From the PUND and P-V measurements, ferroelectric polarization was distinguished from the another polarization, Based on these dielectric measurements, effect of polarization induced by the ferroelectric YMnO₃ on the carrier modulation in the diluted magnetic semiconductor, Ce doped Si film was discussed.     

Structural,Optical, and Electrical Characteristics of Zinc Oxide and Copper Oxide Films and Their Heterojunctions

In this paper, n-Zinc oxide/p-copper oxide heterojunctions were fabricated by RF-sputtering on indium tin oxide-covered glass substrates. The structural and optical properties of the copper oxide and zinc oxide films were analyzed by X-ray diffraction, Fourier transform infrared, scanning electronic microscopy and ultraviolet-visible spectroscopy. The electrical junction properties were investigated by current–voltage (I–V) characteristics. Additionally, both capacitance (C) and conductance (G) versus frequency (f) measurements were realized at room temperature. The junctions showed a rectifying behavior, and C and G varied with both voltage and frequency.     

Characteristics of sandwich-structured Al2O3/HfO2/Al2O3 gate dielectric films on ultra-thin silicon-on-insulator substrates

Sandwich-structure Al₂O₃/HfO₂/Al₂O₃ gate dielectric films were grown on ultra-thin silicon-on-insulator (SOI) substrates by vacuum electron beam evaporation (EB-PVD) method. AFM and TEM observations showed that the films remained amorphous even after post-annealing treatment at 950 °C with smooth surface and clean silicon interface. EDX- and XPS-analysis results revealed no silicate or silicide at the silicon interface. The equivalent oxide thickness was 3 nm and the dielectric constant was around 7.2, as determined by electrical measurements. A fixed charge density of 3 × 10¹⁰ cm⁻² and a leakage current of 5 × 10⁻⁷A/cm² at 2 V gate bias were achieved for Au/gate stack /Si/SiO₂/Si/Au MIS capacitors. Post-annealing treatment was found to effectively reduce trap density, but increase in annealing temperature did not made any significant difference in the electrical performance.