A physicochemical characterization of the interaction between DC-Chol/DOPE cationic liposomes and DNA

A 1:1 mixture of the cationic lipid 3beta-[ N-( N', N'-dimethylaminoethane)-carbamoyl]cholesterol hydrochloride (DC-Chol) and the zwitterionic lipid, 1,2-dioleoyl- sn-glycero-3-phosphoetanolamine (DOPE), has been used to compact calf-thymus DNA (CT-DNA) in aqueous buffered solution at 298.15 K. The formation process of this lipoplex has been analyzed by means of electrophoretic mobility, cryo-TEM, dynamic light scattering, and fluorescence spectroscopy techniques. The experimental results indicate that DC-Chol/DOPE liposomes are mostly spherical and unilamellar, with a mean diameter of around 99 +/- 10 nm and a bilayer with a thickness of 4.5 +/- 0.5 nm. In the presence of CT-DNA, DC-Chol/DOPE/CT-DNA lipoplexes are formed by means of a strong entropically driven surface electrostatic interaction, as confirmed by zeta potential and fluorescence results, as a consequence of which DNA is compacted and condensed at the surface of the cationic liposomes. The negative charges of DNA phosphate groups are neutralized by the positive charges of cationic liposomes at the isoneutrality L/ D ratio, ( L/ D) varphi around 4, obtained from electrophoretic, fluorescence, and DLS measurements. The decrease in the fluorescence emission intensity of ethidium bromide, EtBr, initially intercalated between DNA base pairs, as long as the association between the biopolymer and the cationic liposomes takes place has permitted one to confirm its electrostatic character as well as to evaluate the different microenvironments of varying polarity of DNA-double helix, liposomes, and/or lipoplexes. Electronic microscopy reveals a rich scenario of possible nanostructures and morphologies for the lipoplexes, from unilamellar DNA-coated liposomes to multilamellar lipoplexes passing through cluster-like structures and several intermediate morphologies.     

Time evolution of the formation of different size cationic liposome-polyelectrolyte complexes

We report on the time evolution of the aggregation behaviour of cationic liposome-polyelectrolyte complexes studied by means of dynamic light scattering technique. Pure dioleoyltrimethilammoniumpropane (DOTAP) and mixed DOTAP-dipalmitoylphosphatidylcholine (DPPC) liposomes in polyacrylate sodium salt aqueous solutions in a wide concentration range have been investigated and the size and size distributions of the resulting aggregates evaluated from the intensity autocorrelation function of the scattered light. Under appropriate conditions, we found two discrete aggregation regimes, resulting in two different structural arrangements, whose time evolution depends on the charge ratio and the polyelectrolyte molecular weight. A first small component of average size in the 100-500 range nm coexists with a larger component, whose typical size increases with time, up to some micrometers. The cluster growth from a single liposome, 70 nm in diameter, to the formation of polymer-coated liposome aggregates has been briefly discussed in the light of steric stabilization of colloids. Moreover, it has been found that the kinetics of aggregation of the larger, time-dependent, component follows a dynamical scaling within the diffusion-limited cluster aggregation (DLCA) regime. The understanding of structures resulting from interactions between polyelectrolytes with oppositely charged liposomes may help towards formulation of "lipoplexes" (cationic lipid-DNA complexes) to use as non-viral gene carriers.     

Modulation of the physicochemical state of interior agents to prepare controlled release liposomes

To prepare controlled release liposomes, freeze-drying of double emulsions (FDE) was employed to entrap a model drug, topotecan, which has been reported to tend to leak rapidly from vesicles. In addition, hydrogenated soy phosphatidylcholine (HSPC), N-(carbonyl-methoxypolyethyleneglycol2000)-1,2-distearoyl-sn-glycero-3-phosphoethanolamine (PEG-PE), and cholesterol (3:1:1, mass ratio) were used as the vesicle lipid. Different inner aqueous phases (W1) containing topotecan together with a variety of chemicals, such as citrate, sulfate, and divalent copper ions, were used to prepare W1/O/W2 double emulsions, which were then freeze-dried to obtain dry products. Upon rehydration, the dry products formed topotecan-entrapping unilamelar liposomes with an encapsulation efficiency of 80% and a mean diameter of less than 200 nm. The in vitro release experiments demonstrated that the drug release of topotecan-entrapping FDE liposomes could be successfully controlled through altering the state of the incorporated drug by means of protonation, precipitation, or forming a transition metal-complex. Specifically, the formulation of 300 mM CuSO₄ had a drug release half-life of 36 h. This novel method is a promising way to prepare controlled release liposomes that are more suitable for therapeutic application. In addition, the liposome formation mechanism was discussed based on micrographs and the size of the double emulsions and vesicles, as well as the small angle X-ray scattering pattern and transmission electron microscopy images.     

Effect of freezing rate on physical stability of lyophilized cationic liposomes

Factors affecting the storage stability of lyophilized cationic liposomes were investigated using liposomes prepared with various excipients and by different freezing rates, either quick freezing (freezing by immersion into liquid nitrogen) or slow freezing (cooling to -50 degrees C at a rate of -10 degrees C/h). Increases in the particle size of cationic liposomes observed during freeze-drying were inhibited by the addition of sucrose, trehalose and sucrose-dextran mixtures (1 : 1 and 2 : 1 by weight). The storage instability of the formulations, as indicated by changes in particle size, was affected by their glass transition temperature (T(g)). Addition of high-T(g) excipients resulted in smaller increases in the particle size, indicating improvement of storage stability. The storage stability of cationic liposome formulations was also affected by freezing rate. Formulations prepared by slow freezing exhibited better stability. Longer shear relaxation times were observed for formulations prepared by slow freezing compared with those prepared by quick freezing. This indicates that formulations prepared by slow freezing have a lower matrix mobility, which may result in better storage stability. T(g) or (1)H-NMR relaxation measurements could not detect differences in matrix mobility between formulations prepared by different freezing rates. Shear relaxation measurements seem to be a useful method for evaluating the storage stability of cationic liposome formulations.     

Polyelectrolyte-coated liposomes: stabilization of the interfacial complexes

Anionic liposomes, composed of egg lecithin (EL) or dipalmitoylphosphatidylcholine (DPPC) with 20 mol% of cardiolipin (CL(2-)), were mixed with cationic polymers, poly(4-vinylpyridine) fully quaternized with ethyl bromide (P2) or poly-l-lysine (PL). Polymer/liposome binding studies were carried out using electrophoretic mobility (EPM), fluorescence, and conductometry as the main analytical tools. Binding was also examined in the presence of added salt and polyacrylic acid (PAA). The following generalizations arose from the experiments: (a) Binding of P2 and PL to small EL/CL(2-) liposomes (60-80 nm in diameter) is electrostatic in nature and completely reversed by addition of salt or PAA. (b) Binding can be enhanced by hydrophobization of the polymer with cetyl groups. (c) Binding can also be enhanced by changing the phase state of the lipid bilayer from liquid to solid (i.e. going from EL to DPPC) or by increasing the size of the liposomes (i.e. going from 60-80 to 300 nm). By far the most promising systems, from the point of view of constructing polyelectrolyte multilayers on liposome cores without disruption of liposome integrity, involve small, liquid, anionic liposomes coated initially with polycations carrying pendant alkyl groups.     

Preparation and characterization of a new lipid nano-emulsion containing two cosurfactants, sodium palmitate for droplet size reduction and sucrose palmitate for stability enhancement

A new lipid nano-emulsion (LNE) was prepared from soybean oil and phosphatidylcholine (PC) employing two cosurfactants, sodium palmitate (PA) for reduced droplet size and sucrose palmitate (SP) for stability enhancement. The mean droplet size of LNEs prepared at a PA/PC (w/w) ratio of larger than 1/10 was found to be ca. 50 nm by dynamic light scattering and atomic force microscopy. However, during the 12-month storage, the PA/PC (1/10)-LNE showed an increase in mean droplet size and broadening of the droplet size distribution due to coalescence of the LNE particles. In a saline solution, the coalescence proceeded very rapidly, i.e., the mean droplet size increased to more than 150 nm within 0.5 h. To suppress the coalescence of LNE particles, four sucrose fatty acid esters of different chain lengths were examined as candidate cosurfactants. The results showed that PA/SP/PC (1/4/10)-LNE could maintain a mean droplet size around 50 nm for 12 months. In a saline solution, the mean droplet size could be maintained within 100 nm even after 24 h. Slight formation of flocculation in the LNEs depending on the storage period was suggested by measurement of the 31P nuclear magnetic resonance line width of the LNEs.     

Stealth Liposomes (PEGylated) Containing an Anticancer Drug Camptothecin: In Vitro Characterization and In Vivo Pharmacokinetic and Tissue Distribution Study

Numerous attempts to overcome the poor water solubility of cam ptothecin (CPT) by various nano drug delivery systems are described in various sources in the literature. However, the results of these approaches may be hampered by the incomplete separation of free CPT from the formulations, and this issue has not been investigated in detail. This study aimed to promote the solubility and continuous delivery of CPT by developing long-lasting liposomes using various weights (M.W. 2000 and 5000 Daltons) of the hydrophilic polymer polyethylene glycol (PEG). Conventional and PEGylated liposomes containing CPT were formulated via the lipid film hydration method (solvent evaporation) using a rotary flash evaporator after optimising various formulation parameters. The following physicochemical characteristics were investigated: surface morphology, particle size, encapsulation efficiency, in vitro release, and formulation stability. Different molecular weights of PEG were used to improve the encapsulation efficiency and particle size. The stealth liposomes prepared with PEG₅₀₀₀ were discrete in shape and with a higher encapsulation efficiency (83 ± 0.4%) and a prolonged rate of drug release (32.2% in 9 h) compared with conventional liposomes (64.8 ± 0.8% and 52.4%, respectively) and stealth liposomes containing PEG₂₀₀₀ (79.00 ± 0.4% and 45.3%, respectively). Furthermore, the stealth liposomes prepared with PEG₅₀₀₀ were highly stable at refrigeration temperature. Significant changes were observed using various pharmacokinetic parameters (mean residence time (MRT), half-life, elimination rate, volume of distribution, clearance, and area under the curve) of stealth liposomes containing PEG₂₀₀₀ and PEG₅₀₀₀ compared with conventional liposomes. The stealth liposomes prepared with PEG₅₀₀₀ showed promising results with a slow rate of release over a long period compared with conventional liposomes and liposomes prepared with PEG₂₀₀₀, with altered tissue distribution and pharmacokinetic parameters.     

Membrane interactions of ternary phospholipid/cholesterol bilayers and encapsulation efficiencies of a RIP II protein

Membrane interactions of liposomes of ternary phospholipid/cholesterol bilayers are investigated. These interactions lead to discoidal deformations and regular aggregations and are strongly enhanced by the presence of mistletoe lectin (ML), a RIP II type protein. The encapsulation of ML into liposomal nanocapsules is studied with a systematic variation of the lipid composition to monitor its effect on the physical properties: entrapment, mean size, morphology, and stability. Extrusion of multilamellar vesicles through filters 80 nm pore size was used for the generation of liposomes. The mean sizes of liposomes ranged between 120 and 200 nm in diameter with narrow size distributions. The increase in flow rate with pressure for three dioleoylphosphatidylcholine (DOPC)/cholesterol (Chol)/dipalmitoylphosphatidylcholine (DPPC) lipid mixtures was linear and allowed to extrapolate to the minimum burst pressure of the liposomal bilayers. From the minimum pressures P(min), the bilayer lysis tensions gamma(l) were determined. The increase in P(min) and gamma(l) with an increasing content of a saturated phosopholipid (DPPC) indicates that DPPC increases the mechanical strength of lipid bilayers. Apparently, DPPC, like cholesterol, leads to a less compressible surface and a more cohesive membrane. After preparation, vesicle solutions were purified by gel permeation chromatography to separate encapsulated ML from free ML in the extravesicular solution. Purified liposomes were then characterized. The content of entrapped and adsorbed ML was measured using ELISA. Repetitive freezing/thawing cycles prior to extrusion significantly increased ML uptake. On the contrary, adsorption was not affected neither by lipid composition, nor concentration and preparation. Differences in experimental encapsulation efficiency only reflect the differences in the mean vesicle sizes of the different samples as is revealed by a comparison to a theoretical estimate. Cryo-transmission electron microscopy (Cryo-TEM) images show that beside spherical, single-walled liposomes, there is a considerable fraction of discoidally deformed vesicles. Based on our results and those found in the literature, we speculate that the flattening of the vesicles is a consequence of lipid phase separation and the formation of condensed complexes and areas of different bending elasticities. This phenomenon eventually leads to agglomeration of deformed liposomal structures, becoming more pronounced with the increase in the relative amount of saturated fatty acids, presumably caused by hydrophobic interaction. For the same lipid mixture aggregation correlated linearly with the ML content. Finally, tested liposomal samples were kept at 4 degrees C to examine their stability. Only slight fluctuations in diameter and the increase in polydispersity after 3 weeks of storage occurred, with no statistically significant evidence of drug leakage during a time period of 12 days, illustrating physical stability of liposomes.     

Self-assembled liposomes from electrosprayed polymer-based microparticles

Composite poly(N-isopropylacrylamide) (PNIPAAm)/phosphatidylcholine (PC) microparticles were prepared by electrospraying. PC-based liposomes were subsequently generated upon the addition of water. The microparticles have an average diameter of ca. 1 μm, while the liposomes produced were found to have much smaller diameters of ca. 225–280 nm. The liposomes had zeta potentials of ?44 to ?50 mV, consistent with the formation of a stable suspension. Upon heat treatment, the liposomes exhibit phase transitions due to the influence of PNIPAAm. The liposomes containing 33 % PC have a phase transition temperature of approximately 36 °C, close to physiological conditions. The model drug ketoprofen could be loaded into electrosprayed microparticles and subsequently incorporated into self-assembled liposomes, with an entrapment efficiency for the latter process of ca. 75 %. Sustained drug release regulated by temperature was observed from these drug-loaded materials. At 25 °C, only 45 % of the total drug loading was released after 110 hours, while at 37 °C drug release approached 90 % over the same time period. The self-assembled liposomes reported here, therefore, have great potential as drug delivery devices.     

Singlet-Oxygen Generation from Liposomes: A Comparison of 6β-Cholesterol Hydroperoxide Formation with Predictions from a One-Dimensional Model of Singlet-Oxygen Diffusion and Quenching

Abstract— We measured 6β-cholesterol hydroperoxide (6β-CHP), a specific singlet-oxygen (O₂(δg)) product, during irradiation of unilamellar dimyristoyl 1-α-phosphatidylcholine liposomes containing cholesterol and zinc phthalocyanine (ZnPC). The effects of liposome size, the hydrophobic (O₂(¹δ_g)) quencher, β-carotene, and hydrophilic O₂(¹δ_g) quenchers upon the amount of 6β-CHP formed were determined and interpreted in terms of a one dimensional model of ₂(¹δ_g) quenching and diffusion. The model correctly predicted (1) that the amount of 6β-CHP was increased with increasing liposome size, (2) that P-carotene was more effective at reducing 6β-CHP formation in 400 nm diameter liposomes than 100 nm diameter liposomes and (3) that the hydrophilic quencher, water, was also more effective in large liposomes than in small liposomes.
The hydrophobic quencher, β-carotene, was more effective at reducing the formation of 6β-CHP than at reducing the 1270 nm O₂(¹δ_g) emission. This difference was found to be due to the size distribution present in the liposome preparations because the difference between the 6β-CHP data and the 1270 nm emission data was much smaller in liposome preparations with a narrow size distribution. When a significant size distribution was present, the 6β-CHP data were weighted more heavily with large-diameter liposomes, while the 1270 nm emission data were weighted more heavily with small-diameter liposomes.     

Biodegradable Electrostatic Complexes of Chitosan Cationic Microparticles and Anionic Liposomes

Using the electrostatic adsorption of anionic liposomes on the surface of cationic microparticles of ion-crosslinked chitosan, complexes in which each microparticle can bind up to 110 intact (undestroyed) liposomes are prepared. The saturated complex 350–400 nm in diameter does not dissociate to initial components in aqueous solutions with pH 7 and a NaCl concentration of 0.15 mol/L, but decomposes to 10-nm particles in the presence of proteolytic enzymes. The chitosan–liposome complex and its biodegradation products are characterized by a low cytotoxicity. The described technique may be used to obtain biodegradable multiliposomal containers for the encapsulation and delivery of drugs.     

Structure of small actin-containing liposomes probed by atomic force microscopy: effect of actin concentration & liposome size

Actin-containing liposomes were prepared via extrusion through 400 and 600 nm pore diameter membranes at different monomeric actin concentrations in low ionic strength buffer (G-buffer). After subjecting the liposome dispersions to high ionic strength polymerization buffer (F-buffer), topological changes in liposome structure were studied using atomic force microscopy (AFM). Paired dumbbell, horseshoelike, and disklike assemblies were observed for actin-containing liposomes extruded through 400 and 600 nm pore diameter membranes. The topology of actin-containing liposomes was found to be highly dependent on both liposome size and actin concentration. At 1 mg/mL actin, the actin-containing liposomes transformed into a disklike shape, whereas, at 5 mg/mL actin, the actin-containing liposomes retained a spherical shape. On the basis of these observations, we hypothesize that actin could either polymerize on the surface of the inner leaflet of the liposome membrane or polymerize in the aqueous core of the liposome. We explain the associated shape changes induced in actin-containing liposomes on the basis of the hypothesized mechanism of actin polymerization inside the liposomes. At higher actin concentrations (5 mg/mL), we observed membrane-induced actin self-assembly in G-buffer, which implies that G-actin is able to interact directly with lipid bilayers at sufficiently high concentrations.     

Compaction process of calf thymus DNA by mixed cationic-zwitterionic liposomes: a physicochemical study

The compaction of calf thymus DNA (CT-DNA) by cationic liposomes constituted by a 1:1 mixture of a cationic lipid, 1,2-distearoyl-3-(trimethylammonio)propane chloride (DSTAP), and a zwitterionic lipid, 1,2-dioleoyl-sn-glycero-3-phosphatidylethanolamine (DOPE, null net charge at pH = 7.4), has been evaluated in aqueous buffered solution at 298.15 K by means of conductometry, electrophoretic mobility, cryo-TEM, and fluorescence spectroscopy techniques. The results reveal that DSTAP/DOPE liposomes are mostly spherical and unilamelar, with a mean diameter of around 77 +/- 20 nm and a positively charged surface with a charge density of sigmazeta = (21 +/- 1) x 10(-3) C m(-2). When CT-DNA is present, the genosomes DSTAP/DOPE/CT-DNA, formed by means of a surface electrostatic interaction, are generally smaller than the liposomes. Furthermore, they show a tendency to fuse forming cluster-type structures when approaching isoneutrality, which has been determined by the electrochemical methods at around (L/D)phi = 5.6. The analysis of the decrease on the fluorescence emission of the fluorophore ethidium bromide, EtBr, initially intercalated between DNA base pairs, as long as the genosomes are formed has permitted us to confirm the electrostatic character of the DNA-liposome interaction.     

Cationic liposomes in mixed didodecyldimethylammonium bromide and dioctadecyldimethylammonium bromide aqueous dispersions studied by differential scanning calorimetry, Nile Red fluorescence, and turbidity

The thermotropic phase behavior of cationic liposomes in mixtures of two of the most investigated liposome-forming double-chain lipids, dioctadecyldimethylammonium bromide (DODAB) and didodecyldimethylammonium bromide (DDAB), was investigated by differential scanning calorimetry (DSC), turbidity, and Nile Red fluorescence. The dispersions were investigated at 1.0 mM total surfactant concentration and varying DODAB and DDAB concentrations. The gel to liquid-crystalline phase transition temperatures (Tm) of neat DDAB and DODAB in aqueous dispersions are around 16 and 43 degrees C, respectively, and we aim to investigate the Tm behavior for mixtures of these cationic lipids. Overall, DDAB reduces the Tm of DODAB, the transition temperature depending on the DDAB content, but the Tm of DDAB is roughly independent of the DODAB concentration. Both DSC and fluorescence measurements show that, within the mixture, at room temperature (ca. 22 degrees C), the DDAB-rich liposomes are in the liquid-crystalline state, whereas the DODAB-rich liposomes are in the gel state. DSC results point to a higher affinity of DDAB for DODAB liposomes than the reverse, resulting in two populations of mixed DDAB/DODAB liposomes with distinctive phase behavior. Fluorescence measurements also show that the presence of a small amount of DODAB in DDAB-rich liposomes causes a pronounced effect in Nile Red emission, due to the increase in liposome size, as inferred from turbidity results.     

Influence of Amines on Formation and Texture of Uniform Hematite Particles

The structure and properties of hematite particles obtained by hydrolysis of ferric chloride solution doped with various kinds of amines were examined by TEM, XRD, TG-DTA, N₂and H₂O adsorption, and zeta potential measurements. The shape of precipitates was concentration dependent; they changed from large spheres (diameter: ca. 820 nm) to cubes (edge length: ca. 400 nm) via double-spheres (long axis length: ca. 600 nm) with increasing monoamine concentrations. This effect was enhanced by increasing their pK_avalues. Much pronounced effects of di- and triamines on the particle formation were observed; cubic and double-spherical particles were obtained at a much lower concentration of di- and triamines and small spherical (diameter: ca. 100 nm) and diamond-like (long axis length: ca. 100 nm) particles were further produced at higher concentration. It was suggested that the acceleration of the rate of phase transformation from β-FeOOH to hematite induced by amines plays an important role for producing fairly uniform hematite particles with different shape and size. The hematite particles produced with amines contained small amounts of OH⁻ions in the lattice but were confirmed to be nearly single crystal.     

The enhancement of immunosuppressive effects of cyclosporine A on human T-cells using fusogenic liposomes

The aim of this study was to prepare and characterize neutral, positively charged, negatively charged and fusogenic liposomes of different sizes that contain cyclosporine A (CyA) and to evaluate their immunosuppressive activity on human T-cells. Neutral liposomes containing CyA were prepared from dipalmitoylphosphatidylcholine (DPPC) and cholesterol using the solvent evaporation method. To prepare positively charged, negatively charged and fusogenic liposomes containing CyA; stearylamine (SA), dicetylphosphate (DCP) and dioleoylphosphatidylethanolamine (DOPE) were added to the neutral liposome formulation, respectively. To reduce the size of liposomes containing CyA, extrusion through polycarbonate filters (1000, 400 and 100 nm) was used. The liposomes were characterized by their size, zeta potential and encapsulation efficiency. The in vitro immunosuppressive effects of an aqueous solution of CyA and different liposomes containing CyA were determined on human T-cells by the MTT [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide] assay. The mean diameter of the various multilamellar vesicle (MLV) liposomes containing CyA was between 1.76 and 2.49 μm. The encapsulation efficiency for the different MLV and extruded liposomes containing CyA ranged from 73% to 90%. In vitro immunosuppressive evaluation by T-cell culture showed that fusogenic liposomes have the best inhibitory effects on T-cell proliferation compared to the other liposomes. Reducing the size of the liposomes did not affect the in vitro immunosuppressive activity. The average IC₅₀ for the aqueous solution of CyA and the neutral, positively charged, negatively charged and fusogenic liposomes containing CyA was 4.98 × 10⁻², 7.38, 1.43, 3.84 × 10⁻³ and 7.93 × 10⁻⁵ mM, respectively. The results of this study indicate that fusogenic liposomes have the strongest immunosuppressive activity and could be considered as a suitable delivery system for CyA.     

Bioinspired,Size‐Tunable Self‐Assembly of Polymer–Lipid Bilayer Nanodiscs

Polymer‐based nanodiscs are valuable tools in biomedical research that can offer a detergent‐free solubilization of membrane proteins maintaining their native lipid environment. Herein, we introduce a novel ca. 1.6 kDa SMA‐based polymer with styrene:maleic acid moieties that can form nanodiscs containing a planar lipid bilayer which are useful to reconstitute membrane proteins for structural and functional studies. The physicochemical properties and the mechanism of formation of polymer‐based nanodiscs are characterized by light scattering, NMR, FT‐IR, and TEM. A remarkable feature is that nanodiscs of different sizes, from nanometer to sub‐micrometer diameter, can be produced by varying the lipid‐to‐polymer ratio. The small‐size nanodiscs (up to ca. 30 nm diameter) can be used for solution NMR spectroscopy studies whereas the magnetic‐alignment of macro‐nanodiscs (diameter of > ca. 40 nm) can be exploited for solid‐state NMR studies on membrane proteins.     

Bioinspired,Size‐Tunable Self‐Assembly of Polymer–Lipid Bilayer Nanodiscs

Polymer‐based nanodiscs are valuable tools in biomedical research that can offer a detergent‐free solubilization of membrane proteins maintaining their native lipid environment. Herein, we introduce a novel ca. 1.6 kDa SMA‐based polymer with styrene:maleic acid moieties that can form nanodiscs containing a planar lipid bilayer which are useful to reconstitute membrane proteins for structural and functional studies. The physicochemical properties and the mechanism of formation of polymer‐based nanodiscs are characterized by light scattering, NMR, FT‐IR, and TEM. A remarkable feature is that nanodiscs of different sizes, from nanometer to sub‐micrometer diameter, can be produced by varying the lipid‐to‐polymer ratio. The small‐size nanodiscs (up to ca. 30 nm diameter) can be used for solution NMR spectroscopy studies whereas the magnetic‐alignment of macro‐nanodiscs (diameter of > ca. 40 nm) can be exploited for solid‐state NMR studies on membrane proteins.     

Production of Contact-Free Nanoparticles by Aerosol Process: Dependence of Particle Size on Gas Pressure

Experiments were made to determine the dependence of the size of contact-free nanoparticles produced by aerosol process on gas pressure. The particles were collected as contact-free dispesoids in hexane with a cationic surfactant, and the geometric mean sizes were below 10 nm in diameter. It was found that the size increased linearly as the pressure was raised from 0.04 to 1.43 kPa for Ag, Bi, Cu, and Te. Similar slopes were obtained for the linear function between size and gas pressure except for Te.     

载药磁性阳离子高聚物脂质体的制备及表征

通过羧甲基壳聚糖接枝二甲基十八烷基环氧丙基氯化铵, 合成了水油两溶性的羧甲基壳聚糖十八烷基季铵盐(QACMC), 并用其代替合成磷脂与胆固醇反应, 制备阳离子高聚物脂质体(CPL). 利用阳离子高聚物脂质体包覆水溶性Fe3O4磁流体, 构建磁性阳离子高聚物(MCPL)体系. 用TEM, DLS, VSM, FTIR及Zeta电位仪等对所制样品进行表征. 结果表明, 磁性阳离子高聚物脂质体在水相中可稳定存在, 粒径可达到15.3 nm, 分散性较好, Zeta电位可达到+38.22 mV, 比饱和磁化强度为27.9 A·m2/kg, 具有超顺磁性; MCPL对药物长春新碱的包封率可达到93.1%, 在Tris-HCl(pH=7.4)缓冲溶液中具有良好的缓控释功能.