Characterization of pore size distribution in porous silicon by NMR cryoporosimetry and adsorption methods

The results of studying the pore size distribution of mesoporous silicon by NMR cryoporosimetry are described. These data are compared with the results obtained by adsorption methods.     

PEGylation of porous silicon using click chemistry

Porous silicon has received considerable interest in recent years in a range of biomedical applications, with its performance determined by surface chemistry. In this work, we investigate the PEGylation of porous silicon wafers using click chemistry. The porous silicon wafer surface chemistry was monitored at each stage of the reaction via photoacoustic Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy, whereas sessile drop contact angle and model protein adsorption measurements were used to characterize the final PEGylated surface. This work highlights the simplicity of click-chemistry-based functionalization in tailoring the porous silicon surface chemistry and controlling protein-porous silicon interactions.     

Surface chemistry of porous magnesium fluoride

Porous preparations of magnesium fluoride were obtained from magnesium sulphate and magnesium carbonate and their surface properties have been studied. It has been shown that pure magnesium fluoride has a weak surface acidity of the Lewis type and no protonic sites stronger than H_R?0.82. Base properties of MgF₂ surfaces are more pronounced than acid ones, but the base strength is low. Surfaces of MgF₂ also bear oxidizing and reducing centres capable of forming ion radicals with adsorbed perylene and tetracyanoethylene. The low catalytic activity of magnesium fluoride for acid catalysed reactions suggests the application of MgF₂ as a catalyst support rather than as a catalyst.     

Surface chemistry of luminescent colloidal silicon nanoparticles

Luminescent colloidal silicon particles are obtained by burning silane and slowly etching the product with hydrogen fluoride. Depending on their size, the particles emit red-orange or blue-green light with decay times between 28 micros and <0.1 micros, respectively. The quantum yield of the red luminescence is found to be 35%, i.e., much higher than the 7% previously reported, and the yield of the blue-green luminescence is 18%. The luminescence of the colloidal particles is quenched upon the attack of their surface by free radicals, oxygen-centered radicals being more efficient than carbon-centered ones. It is concluded from the dependence of the luminescence wavelength on the etching time and the dependence of the luminescence lifetime on the wavelength that the mechanism of the photoluminescence undergoes a change with decreasing particle size. The red luminescent particles exhibit amphiphilic properties, such as unusual wetting phenomena. This effect is understood in terms of the existence of few polar groups on the otherwise nonpolar surface of the particles, possibly Si-OH groups, which also act as centers of the red luminescence.     

o-Dithiolene and o-aminothiolate chemistry of iron: Synthesis,structure and reactivity

Homoleptic complexes with an iron center bound by two o-dithiolene or o-aminothiolate ligands, or one tetradentate aminothiolate ligand will be discussed in the context of their molecular and electronic structures. These compounds are predominantly dimeric and exhibit rich redox chemistry due to the multiple redox active iron and ligand components. Their reaction with small molecules, namely, pyridines, amines, phosphines, phosphites, arsines, stibines, cyanide, halogens, and nitric oxide, has produced extensive libraries of compounds that are also reviewed. These five- and six-coordinate mononuclear and dinuclear adduct complexes access an incredibly broad range of iron and ligand spin and oxidation states that generates a multitude of electronic structures.     

Surface chemistry of polymer-supported nano-hydrated ferric oxide for arsenic removal: effect of host pore structure

Immobilization of hydrous ferric oxide(HFO) particles inside solid hosts of porous structure is an important approach to improve their applicability in advanced water treatment such as arsenic and heavy metal removal. Here, we fabricated three polystyrene(PS)-based nano-HFOs and explored the effect of host pore structure on the surface chemistry of the immobilized HFOs. Potentiometric titration of the hybrids and surface complexation modeling of their adsorption towards arsenite and arsenate were performed to evaluate the surface chemistry variation of the loaded HFOs. Polymer hosts of higher surface area and narrower pore size would result in smaller particle size of HFOs and lower the value of the point of zero charge. Also, the site density(normalized by Fe mass) and the deprotonation constants of the loaded HFOs increased with the decreasing host pore size. Arsenite adsorption did not change the surface charge of the loaded HFOs, whereas arsenate adsorption accompanied more of the negative surface charges. Adsorption affinity of both arsenic species with three HFO hybrids were compared in terms of the intrinsic surface complexation constants optimized based on the adsorption edges. HFO loaded in polystyrene host of smaller pore size exhibits stronger affinity with arsenic species.     

Formation, structure, and reactivity of amino-terminated organic films on silicon substrates

Amino-functionalized organic films were prepared by self-assembling 3-aminopropyltriethoxysilane (APTES) on silicon wafers in either anhydrous toluene or phosphate-buffered saline (PBS) for varied deposition times. Fourier transform infrared spectroscopy (FTIR) and ellipsometry have shown that the structure and thickness of APTES films are governed by the deposition time and reaction solution. Deposition from an anhydrous toluene solution produces APTES films ranging from 10 to 144 A in thickness, depending on the reaction time. FTIR spectra indicate that film growth initially proceeds by adsorption of APTES to the silicon surface followed by siloxane condensation, and after an extended period of time APTES molecules accumulate on the underlying APTES film by either covalent or noncovalent interactions. In contrast, spectroscopically indistinguishable APTES films in thickness ranging from 8 to 13 A were formed when deposition was conducted in aqueous solutions. Measured water contact angles indicate that APTES films deposited in aqueous solutions are more hydrophilic compared to those prepared in toluene solutions. Fluorescence measurements revealed that APTES films prepared in toluene solutions contain more reactive surface amino groups by ca. 3 to 10 times than those prepared in aqueous solutions for the identical reaction time.     

Nanoscale surface chemistry over faceted substrates: structure, reactivity and nanotemplates

Faceting is a form of self-assembly at the nanometre-scale on adsorbate-covered single-crystal surfaces, occurring when an initially planar surface converts to a "hill and valley" structure, exposing new crystal faces of nanometre-scale dimensions. Planar metal surfaces that are rough on the atomic scale, such as bcc W(111), fcc Ir(210) and hcp Re(1231), are morphologically unstable when covered by monolayer films of oxygen, or by certain other gases or metals, becoming "nanotextured" when heated to temperatures above approximately 700 K. Faceting is driven by surface thermodynamics (anisotropy of surface free energy) but controlled by kinetics (diffusion, nucleation). Surfaces can spontaneously rearrange to minimize their total surface energy (by developing facets), even if this involves an increase in surface area. In this critical review, we discuss the structural and electronic properties of such surfaces, and first principles calculations are compared with experimental observations. The utility of faceted surfaces in studies of structure sensitive reactions (e.g., CO oxidation, ammonia decomposition) and as templates for growth of metallic nanostructures is explored (122 references).     

Surface modification of silicon nanowires via copper-free click chemistry

A two-step process based on copper-free click chemistry is described, by which the surface of silicon nanowires can be functionalized with specific organic substituents. A hydrogen-terminated nanowire surface is first primed with a monolayer of an α,ω-diyne and thereby turned into an alkyne-terminated, clickable platform, which is subsequently coupled with an overlayer of an organic azide carrying the desired terminal functionality. The reactive, electron-deficient character of the employed diyne enabled a quantitative coupling reaction at 50 °C without metal catalysis, which opens up a simple and versatile route for surface functionalization under mild conditions without any potentially harmful additives.     

Surface self-diffusion of organic molecules adsorbed in porous silicon

The pulsed field gradient nuclear magnetic resonance method has been employed to probe self-diffusion of organic guest molecules adsorbed in porous silicon with a 3.6 nm pore size. The molecular self-diffusion coefficient and intrapore adsorption were simultaneously measured as a function of the external vapor pressure. The latter was varied in a broad range to provide pore loading from less than monolayer surface coverage to full pore saturation. The measured diffusivities are found to be well-correlated with the adsorption isotherms. At low molecular concentrations in the pores, corresponding to surface coverages of less than one monolayer, the self-diffusion coefficient strongly increases with increasing concentration. This observation is attributed to the occurrence of activated diffusion on a heterogeneous surface. Additional experiments in a broad temperature range and using binary mixtures confirm this hypothesis.     

Surface characterization of stepwise oxidized spruce thermomechanical pulp samples by different analytical methods

An investigation of the fiber samples with various amounts of lignin, hemicelluloses and cellulose was conducted by means of dye adsorption, spectrometric and chemical analyses. Five fiber samples were prepared by the oxidation of unbleached Norway spruce thermo-mechanical pulp with acidic potassium permanganate solution. Each sample was oxidized with defined amount of KMnO₄ and the degree of oxidation was determined as kappa number. Fibers were additionally characterized by conductometric titration, the determination of hemicelluloses and infrared spectrometry. Sorption of various types of dye, namely Methylene Blue (MB), Crystal Violet (CV) and Astra Blue (AB) on the fiber surface was studied and compared to the kappa number and other fiber characteristics. The adsorption of MB and CV is found to follow the amount of anionic (carboxylic) groups, which at first increase and later decrease toward the final stages of oxidation. The behavior of AB is nearly the opposite, its adsorption increases with the depletion of lignin and carboxylate groups, pointing to a different mechanism of AB binding on fibers.     

Synthesis, molecular structure, and reactivity of the isolable silylenoid with a tricoordinate silicon

The first tricoordinate fluorosilylenoid, (t-Bu2MeSi)2SiFLi.3THF (1), was synthesized, and its X-ray molecular structure was determined. 1 was synthesized in 40% yield by a bromine-lithium exchange reaction in THF of the corresponding fluorobromosilane with t-Bu2MeSiLi. 1 is best described as an R2SiF- anion attracted to a (Li.3THF)+ cation with a small contribution of resonance structure that consists of a silylene fragment and FLi.3THF. 1 reacts as a nucleophile with MeCl, PhH2SiCl, H2O, and MeOH, as an electrophile with MeLi, and as a silylene with Li (or t-BuLi) and Na, yielding alpha-lithium and alpha-sodium silyl radicals, respectively. Either photolysis or thermolysis of 1 yields the corresponding disilene R2Si=SiR2 (R = t-Bu2MeSi), probably via dimerization of R2Si:.     

Surface chemistry of aerosolized nanoparticles:thermal oxidation of silicon

The kinetics of reaction between silicon nanoparticles and molecular oxygen were studied by tandem differential mobility analysis. Aerosolized silicon nanoparticles were extracted from a low-pressure silane plasma into an atmospheric pressure aerosol flow tube reactor. Particles were initially passed through a differential mobility analyzer that was set to transmit only those particles having mobility diameters of approximately 10 nm. The monodisperse particle streams were mixed with oxygen/nitrogen mixtures of different oxygen volume fractions and allowed to react over a broad temperature range (600-1100 degrees C) for approximately one second. Particles were size-classified after reaction with a second differential mobility analyzer. The particle mobility diameters increased upon oxidation by up to 1.3 nm, depending on the oxygen volume fraction and the reaction temperature. Oxidation is described by a kinetic model that considers both oxygen diffusion and surface reaction, with diffusion becoming important after formation of a 0.5 nm thick oxide monolayer.     

Effect of ozonolysis on the pore structure, surface chemistry, and bundling of single-walled carbon nanotubes

An ozonolysis protocol has recently been developed that cannot only purify nanotubes but also achieve rational spatial and molecular control over chemical derivatization in single-walled carbon nanotubes (SWCNTs). Ozonolysis likely opens end caps and introduces holes into the sidewalls of tubes, which may occur through an oxidation of carbon atoms located on the nanotube surface, resulting in the formation of oxygen-containing functional groups. Overall, it was demonstrated by analysis of nitrogen adsorption and TGA/DTG that the total surface area, micropore volume, and mesopore volume of SWCNTs depend on several, intertwined factors including the degree of purity, surface functionality, density of surface groups, as well as the state of aggregation of the carbon tubes. Hydrogen bonding in these systems plays a role too. Data suggest that complete removal of surface functionalities would lead to a greater total surface area and higher micropore volume.     

Surface heterogeneity of passively oxidized silicon carbide particles: vapor adsorption isotherms

The surfaces of silicon carbide particles subjected to two different passive oxidation treatments have been characterized by immersion calorimetry and vapor adsorption techniques. Surface enthalpies and surface free energies have been computed using semiempirical models and are compared to theoretical estimations. The surface entropy term appears higher than in the case of other solids studied with the same analysis. The definition of the surface entropy term is discussed in order to explain the discrepancy between calculation and experiment. An explanation of results is proposed, which is related to the constitution of silicon oxide layers at the surface of silicon carbide, a fact demonstrated by previous XPS measurements.     

Surface structure and reactivity study of phosphotungstic acid-nitrogenated ormosils

Supramolecular interactions between nitrogenated groups in hybrid ormosils bearing phosphotungstate nanocatalyst were used to tune the photocatalytical activity of these class-II hybrid materials obtained through sol–gel chemistry. Surface chemistry and morphology of the materials was studied by scanning electron microscopy, atomic force microscopy, X-ray photoelectron spectroscopy and water contact angle measurements. The photocatalytic efficiency of these hybrid films, measured by the degradation of crystal violet over-layer deposited on ormosils films, is higher for ormosils bearing neutral, more polar and less H-bonding nitrile groups than those bearing alkylamine/alkylammonium functionalities, despite the lower W/Si atomic ratio on the surface and lower tungsten percentage of the pure nitrile bearing ormosils. Such higher surface reactivity of the nitrile bearing ormosils is due to weaker interaction with the phosphotungstate and the lower activity of amine bearing ormosils is attributed to the competition among reversible photochromism and photocatalysis pathways in these materials.     

具有三维贯通多级孔道结构大孔氧化铝的制备与表征

采用铝溶胶晶种引入、结合相分离的方法制备了具有三维贯通多级孔道结构的大孔氧化铝材料。采用扫描电镜（SEM）、X射线衍射（XRD）、N₂吸附-脱附、压汞、核磁共振波谱（NMR）等测试方法对所得材料进行了表征。结果表明,该氧化铝材料具有200-600 nm的均匀分布且贯通的连续大孔孔道,经550℃焙烧即可得到结晶态γ-氧化铝。大孔氧化铝比表面积达到366 m²/g,具有以5 nm及400 nm为中心的较为集中的介孔-大孔多级孔道分布。焙烧后的样品中,铝具有四、六两种配位状态。制备过程中,聚环氧乙烷（PEO）作为诱导剂引发固-液两相分离,形成具有三维贯通多级孔道结构大孔氧化铝,而凝胶中引入铝溶胶时,AlOOH晶粒与铝交联水合物均相伴生,在凝胶过程诱导铝交联水合物转变为AlOOH,最终使大孔氧化铝在较低的焙烧温度即可转化为γ-氧化铝。     

Click chemistry in mesoporous materials: functionalization of porous silicon rugate filters

In this paper we report the use of the optical properties of porous silicon photonic crystals, combined with the chemical versatility of acetylene-terminated SAMs, to demonstrate the applicability of "click" chemistry to mesoporous materials. Cu(I)-catalyzed alkyne-azide cycloaddition reactions were employed to modify the internal pore surfaces through a two-step hydrosilylation/cycloaddition procedure. A positive outcome of this catalytic process, here performed in a spatially confined environment, was only observed in the presence of a ligand-stabilized Cu(I) species. Detailed characterization using Fourier transform infrared spectroscopy and optical reflectivity measurements demonstrated that the surface acetylenes had reacted in moderate to high yield to afford surfaces exposing chemical functionalities of interest. The porous silicon photonic crystals modified by the two-step strategy, and exposing oligoether moieties, displayed improved resistance toward the nonspecific adsorption of proteins as determined with fluorescently labeled bovine serum albumin. These results demonstrate that "click" immobilization offers a versatile, experimentally simple, and modular approach to produce functionalized porous silicon surfaces for applications as diverse as porous silicon-based sensing devices and implantable biomaterials.     

Atomic and electronic structure of the surface of porous silicon layers

Atomic and electronic structure of the surface layers of porous silicon was studied by the methods of the near fine structure spectroscopy at the edge of X-ray absorption and ultrasoft X-ray emission spectroscopy. The thickness of the oxide layer and the degree of distortion of silicon-oxygen tetrahedra in this layer were estimated. The thickness of the surface oxide layer on the amorphous layer covering the nanocrystals of porous silicon that was kept during one year is several times greater than the thickness of the natural oxide in the single crystal silicon wafers. Distortion of the silicon-oxygen tetrahedron, the basic structural units of the silicon oxide, is accompanied by elongation of Si-O bonds and an increase in the Si-O-Si bond angles.