胶体晶体自组装常用方法的研究进展

胶体自组装是制造大面积胶体晶体的高效方法,对制备各种功能胶体晶体材料具有十分重要的意义,在微纳制造、新材料、能源、医学等领域有巨大的应用潜力.对胶体自组装过程中涉及的各种作用力进行了详细分析,归纳了胶体晶体自组装的基本方法.面向制造大面积胶体晶体,阐述了几类代表性的新型胶体晶体自组装方法,包括温度辅助、模板辅助、表面活性剂辅助、旋涂法与界面转移相结合等,分析了不同方法的影响因素、优缺点和未来的改良方向,并介绍了在完整单层膜基础上制造三维胶体晶体的工艺方法.为提高胶体晶体制造质量和效率、拓宽胶体自组装技术的应用提供必要参考.     

双尺寸胶体晶体的制备及其结构表征

采用垂直沉积法制备了双尺寸胶体晶体结构,并实现多种双尺寸SiO2胶体晶体结构的自组装.通过场发射扫描电子显微镜(FE-SEM)对胶体晶体的结构及排列方式进行测试分析.对双尺寸胶体晶体的生长过程进行探讨,研究大小胶体球的粒径比及体积比对结构的影响规律.研究结果表明大小球粒径比过小时,双尺寸胶体晶体排列结构有序性差.增大大胶体球的粒径时,合成相同双尺寸胶体晶体结构所对应的大小胶体球体积比增大.     

具有梯度结构的蛋白石光子晶体的制备

具有梯度结构的蛋白石光子晶体具有独特的光学性能。本文通过垂直沉积法和电场诱导沉积等方法共同作用将具有不同直径的聚苯乙烯(Polystyrene)胶体微球逐层组装在一起,制备出具有梯度周期尺寸变化的蛋白石结构。     

PS微球胶体晶体及其反相SiO2结构的制备和表征

采用水平沉积方法,制作了多种FCC结构的聚苯乙烯(PS)胶体晶体,并实现了直径在2-10 μm一类大球的自组装.以PS胶体晶体为模板,采用垂直沉积方法得到了二氧化硅(SiO2)胶体晶体的反相结构.文中还对两种沉积方法进行了比较.     

SiO2双尺寸光子晶体的自组装及稳定性探索

采用St?ber法制备不同尺寸SiO2胶体球,利用多次垂直沉积法制备SiO2双尺寸光子晶体.通过场发射扫描电子显微镜(FE-SEM)对所得双尺寸光子晶体的形貌和排列方式进行表征.对双尺寸光子晶体的生长过程进行探讨,研究界面作用力及胶体球间相互作用力对制备稳定结构的影响.研究结果表明,SiO2双尺寸光子晶体具有更加有序稳定的结构.胶体球间的相互作用力随胶体球粒径增大而增大,大粒径胶体球更有利于形成稳定的结构.     

不同膜厚对SiO2光子晶体形貌及光学性能的影响

利用改良的St6ber法制成了粒径均一的SiO2胶体颗粒,胶体微球颗粒平均粒径为200 nm.保持SiO2悬浮液体积分数相同,对双基片自组装垂直沉积进行改造,改变夹层厚度,沉积得到厚度不同的SiO2光子晶体薄膜.利用扫描电子显微镜观察了膜厚不同的SiO2光子晶体薄膜样品的表面以及断面微观形貌,测试了样品的光反射性能,此外还讨论了光子晶体薄膜厚度对样品表面的形貌以及样品光反射性能带来的影响.     

SiO2-BaTiO3异质双尺寸超材料结构的制备

采用垂直沉积法自组装制备了SiO2胶体晶体模板,并结合Pechini溶胶-凝胶法实现多种SiO2-BaTiO3异质双尺寸超材料结构的制备.通过X射线衍射分析仪(XRD)和场发射扫描电子显微镜(FE-SEM)对所得粉体和光子晶体的晶型、形貌及排列方式进行测试分析.对比钛酸钡粉体,对SiO2-BaTiO3异质超材料的结构进行探讨,研究不同pH值对钛酸钡粉体的形貌和粒径的影响,进而研究不同凝胶对异质超材料结构的影响.研究结果表明异质结构中胶体晶体模板的排列更加紧密有序,缺陷减少,纳米颗粒的粒径与原钛酸钡粉体的粒径基本一致,利用不同凝胶可获得LS2、LS4、LS6型结构及层-层复合结构.     

大面积垂直取向介孔二氧化硅薄膜的制备及性能研究

具有大尺度无缺陷垂直孔道的介孔二氧化硅薄膜在生物材料、电化学和光学传感器中具有重要应用价值.本文采用电化学辅助自组装(EASA)工艺制备大面积(5×5 cm2)孔道垂直定向的介孔二氧化硅薄膜,利用循环伏安曲线(CV),扫描电子显微镜(SEM)、原子力显微镜(AFM)、高分辨透射电子显微镜(HRTEM)、二维掠入射小角X射线散射(2D-GISAXS)等手段对薄膜渗透性、表面宏观形貌,及介孔孔道的结构等进行了表征,并通过同步辐射反射率计测试了该薄膜在极紫外波段的光学性能.结果 表明,采用EASA法在大面积基底上成功制备出了具有垂直取向孔道且渗透性良好的介孔二氧化硅薄膜,其孔径和晶胞参数大小分别为2.83 nm和4.1 nm,且其在极紫外波段(5～11nm)的反射率最高可达75;.     

非密堆积型PS胶体晶体及其TiO2反结构的制备

采用改进的垂直沉积法,以聚苯乙烯(polystyrene,PS)微球为组成基元,制作出两种非密堆积型的二元胶体晶体结构.扫描电镜观察和反射光谱测试证明该方法可以获得很好的有序结构;以单一组元的非密堆积型PS微球胶体晶体为模板,制备出了相对折射系数较大的二氧化钛(titania,TiO2)为组成的胶体晶体反结构.     

利用水平沉积法制作PS微球二元胶体薄膜及其它复杂结构

本文采用水平沉积方法,制作出各种胶体晶体薄膜.以聚苯乙烯微球为构建单元,制作了多种二元胶体晶体和非单一平面的胶体晶体.为实现太赫兹光子晶体波导,还采用这一方法将线缺陷植入胶体晶体.结果显示通过该方法可以获得很好的有序结构,说明水平沉积方法可以广泛于各种胶体晶体制作.     

CsI-LiCl共晶材料的坩埚下降法生长与闪烁性能研究

本文采用坩埚下降法,在真空密封的石英坩埚中成功生长出CsI-LiCl与CsI-LiCl:Na共晶闪烁体。通过扫描电子显微镜(SEM)观察晶体微结构表明该共晶中LiCl相与CsI相存在周期性的层状排列,CsI相的厚度在5 μm左右。共晶样品的X射线激发发射谱显示在CsI-LiCl和CsI-LiCl:Na共晶样品存在缺陷发光,在CsI-LiCl样品中还观察到了纯CsI的自陷激子(STE)发光。CsI-LiCl样品在α粒子激发下的多道能谱中观察到明显的全能峰,这一结果证明CsI-LiCl共晶可用于热中子探测的潜力。     

First-principles coexistence simulations of supercooled liquid silicon

We perform first-principles coexistence simulations of the low-density and the high-density phases of supercooled liquid silicon and find a negative slope for the coexisting line in the temperature-pressure plane. Electron density maps and electron-localization function plots of the two phases of silicon show marked differences. The calculated differences suggest more localized electrons in the low-density liquid compared to the high-density liquid, coming from an increased population of covalent bonds, which further explain the calculated negative slope in the two phase coexistence regime. This is consistent with the presence of a pseudo-gap in low-density liquid silicon, absent in the high-density liquid which shows a metallic behavior.     

静电纺丝法制备CeO2微纳米纤维及其除氟性能

以聚丙烯腈(PAN)为载体,六水合硝酸铈[Ce(NO₃)₃·6H₂O]为原料,采用静电纺丝法制备了Ce(NO₃)₃/PAN纤维,在空气中热处理得到CeO₂微纳米纤维,通过XRD、BET和SEM对CeO₂微纳米纤维进行表征。采用静态吸附实验探讨了CeO₂微纳米纤维去除水溶液中氟离子的性能,考察了溶液pH值、初始氟离子浓度及共存阴离子等对吸附性能的影响。结果表明,pH=3时,CeO₂微纳米纤维对F^-的吸附性能最佳,CeO₂吸附量随着F^-浓度的增大呈上升趋势。CeO₂微纳米纤维对F^-的吸附等温线遵循Langmuir模型,二级动力学模型能很好地描述CeO₂微纳米纤维对F^-的吸附过程。CeO₂微纳米纤维的除氟性能优良,可为其实际应用提供理论参考。     

Crystal structures of thecis andtrans isomers of dithiahexahydro[3.3]metacyclophane

Structures of both thecis andtrans isomers of dithiahexahydro[3.3]metacyclophane, ?C₆H₄?CH₂SCH₂?C₆H₁₀?CH₂SCH₂?, have been determined, wherecis andtrans refer to the attachments to the cyclohexane ring. Thecis form crystallizes in the monoclinic space groupP2₁/c witha=8.4299(11)Å,b=21.772(2)Å,c=8.9724(13)Å, β=116.574(11)^o, andZ=4. Thetrans isomer packs into the monoclinic space groupP2₁ witha=8.159(16)Å,b=10.185(5)Å,c=9.558(2)Å, β=112.435(18)^o, andZ=2. The cyclohexane ring of thecis isomer is in the chair conformation, while the cyclohexane of thetrans isomer is found in a twisted boat conformation.     

CTAB与SDBS对碳酸锶粒子生长形态调控及机理研究

以表面活性剂CTAB和SDBS为化学添加剂,采用化学共沉淀法对碳酸锶晶体的生长形态进行调控,成功地制备出了实心的树枝状和花瓣为空心的花状碳酸锶粉体,并用X射线衍射(XRD)、扫描电子显微镜(SEM)和傅里叶变换红外光谱(FT-IR)等分析手段对样品进行了表征;最后重点对化学添加剂可能产生的影响机理进行了初步的探讨.结果表明,CTAB和SDBS在晶体生长的过程中能起到显著的影响作用,两者对粒子分散性能的作用效果相反,而且后者对晶体(013)和(213)晶面表面能降低的贡献明显大于前者.     

Triethyl ammonium salt of O,O′-bis(p-tolyl)dithiophosphate, [Et3NH]+[(4-MeC6H4O)2PS2]−

Triethyl ammonium Salt of O,O′-bis(p-tolyl)dithiophosphate and O,O′-bis(m-tolyl)dithiophosphate have been obtained by reaction of p- and m-cresol, respectively with P₂S₅ in toluene and have been characterized by elemental analysis, IR, ¹H and ³¹P NMR spectroscopy. The molecular structure of O,O′-bis(p-tolyl)dithiophosphate has been determined. Crystal data: [Et₃NH]⁺[(4-MeC₆H₄O)₂PS₂]⁻: Monoclinic, P2₁/c, a=15.2441(9) ?, b=10.415(2) ?, c=3.9726(9) ?, β=91.709(7)°, V=2217.5(1) ?⁻³, Z=4.Supplementary materials Additional material available from the Cambridge Crystallographic Data Centre (CCDC no. 600927 for [Et₃NH]⁺[(4-MeC₆H₄O)₂PS₂]⁻ comprises the final atomic coordinates for all atoms, thermal parameters, and a complete listing of bond distances and angles. Copies of this information may be obtained free of charge on application to The Director, 12 Union Road, Cambridge CB2 2EZ, UK (fax: +44-1223-336033; email: deposit@ccdc.cam.ac.uk or www:http://www.ccdc.cam.ac.uk).     

Crystal structure of Zn4Na(OH)6SO4Cl·6H2O

The structure of Zn₄Na(OH)₆SO₄Cl·6H₂O, a secondary mineral from Hettstedt, Germany, was determined by single-crystal X-ray diffraction. The crystals are hexagonal,a=8.413(8),c=13.095(24) Å, space group $P\bar 3$ , Z=2. The structure was refined to R=0.0554 and R_w=0.0903 for 970 reflections with I≥3σ(I). The structure can be described as zinc hydroxide layers perpendicular toc, from which sulfates and chlorides extend. The layers are held together by a system of hydrogen bonds involving hexaaquo Na⁺ ions which occupy the interlayer space.     

Synthesis and Crystal Structure of 5-[2-(6-bromonaphthalenyloxymethyl)]-3-(4-morpholinomethyl)-1,3,4-oxadiazole-2(3<Emphasis Type="Italic">H</Emphasis>)-thione

Abstract  The title compound, C₁₈H₁₈BrN₃O₃S, a derivative of 1,3,4-oxadiazole, crystallizes in the triclinic space group P-1 with unit cell parameters a = 6.8731(3), b = 8.9994(4), c = 15.7099(6) ?, α = 92.779(3)°, β = 130.575(3)°, γ = 107.868(4)°, Z = 2. The dihedral angle between the mean planes of the planar naphthyl and morpholine (chair) rings with the planar oxadiazol ring is 50.1(8) and 76.8(6)°, respectively. The planar naphthyl ring is twisted 52.2(5)° with the mean plane of the morpholine ring. A group of four intermolecular close contacts are observed between a bromine atom and hydrogen atoms from the closely packed naphthyl, morpholine and oxy–methyl groups in the unit cell. These molecular interactions in concert with an additional series of π–π stacking interactions that occur between the center of gravity of the two 6-membered rings of the naphthalene group influence the twist angles of each of these three groups. A MOPAC AM1 calculation of the conformation energy of the crystal structure [226.0128(9) kcal] compared to that of the minimum energy structure after geometry optimization [29.9744(1) kcal] reveals a significantly reduced value. The twist angles of the three groups above also change after the AM1 calculation giving support to the influence of both intermolecular C–H···Br short-range interactions and Cg π–π stacking interactions on these angles which therefore play a role in stabilizing crystal packing. Graphical Abstract  Crystal structure of 5-{[(6-bromonaphthalen-2-yl)oxy]methyl}-3-(morpholin-4-ylmethyl)-1,3,4-oxadiazole-2(3H)-thione, C₁₈H₁₈BrN₃O₃S, is reported and its geometric and packing parameters described and compared to a MOPAC computational calculation. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Crystal structure of irisolidone from the flowers of Pueraia lobata

Irisolidone (5,7-dihydroxy-6,4′-dimethoxyisoflavone) was isolated from the flowers of Pueraia lobata and its crystal structure was examined by X-ray single crystal diffraction. The crystal structure of irisolidone is monoclinic, space group P2₁/c with a = 15.491(9) ?, b = 7.895(4) ?, c = 13.321(7) ?, β = 110.546(9)° and Z = 4. Hydrogen bonding and aromatic π–π stacking assemble the title compound into a three-dimensional networking structure.