Corrosion processes of iron in acidic solutions associated with potential oscillations induced by chlorates and perchlorates

Potential oscillations appear under current-controlled conditions of the chlorate- and perchlorate-perturbed electrochemical Fe|H₂SO₄ system. The potential oscillates between the active and passive states of Fe. It is shown that this oscillatory phenomenon is associated with localized corrosion of Fe due to the generation of chlorides via the reduction of chlorates and perchlorates by ferrous ions. Ferrous ions are generated either during the active dissolution of bare Fe (low-potential state) or during the passivation of Fe (high-potential state) due to a H⁺-catalyzed chemical dissolution of the oxide. Potential oscillations can be utilized to detect and characterize pitting corrosion of Fe in acidic solutions because, under current-controlled conditions, the halide-free Fe|H₂SO₄ system does not exhibit any kind of oscillatory phenomena. Characterization of pitting corrosion becomes possible through the analysis of galvanodynamic and galvanostatic curves obtained at various concentrations of chlorates and perchlorates. The variation of the anion concentration and applied current influence the onset and features of the potential oscillations.     

Theoretical investigation of the sulphur K-LL auger energies and chemical shifts in a series of sulphur compounds

Two series of investigations are reported on LL double-hole states of molecules containing sulphur. First the results on the LL double ionization potentials and K-LL Auger energies of H₂S and SO₂ show that the use of a frozen-orbital approximation is preferable to SCF methods for calculation of chemical shifts in K-LL Auger energies and LL ionization potentials. Secondly chemical shifts of K-LL Auger energies of a series of model molecules H₂S, H₂SO₄, H₄SO₂ and H₂SO₂ are correlated with the formal oxidation state of sulphur. This correlation gives a shift of 12 eV in Auger energy per formal charge on sulphur.     

A nuclear quadrupole resonance study of the chlorate ion

The quadrupole frequencies of the chlorine nuclei in two isomorphous chlorates, RbClO₃ and CsClO₃, were used for the estimation of the corresponding electric field gradients at the chlorine nucleus site in the free chlorate ion. The application of the Townes and Dailey theory led to the calculation of the effective charges on the chlorine and oxygen atoms and the double-bond character of the Cl-O bonds. The results obtained are consistent with all the available theoretical and experimental evidence.     

Mechanism for the radiolytic conversion of sulphur dioxide to sulphuric acid

The present paper describes the radiolytic oxidation of 10^-4M K₄[Fe(CN)₆] aqueous aerated solution in the presence of different concentrations of SO₂. In the absence of SO₂, ferrocyanide is oxidized to ferricyanide with a G value of 7.2. In this solution two O₂^- react to form H₂O₂. Ferrocyanide is oxidized by OH and H₂O₂ both. At low concentration of SO₂, O₂^- reacts with SO₂ forming first SO₄^._, which leads to chain oxidation of SO₂. The G [Fe(CN)₆^3-) decrease from 7.2 to 4.5. At higher concentrations of SO₂, H₂O₂ also reacts with SO₂ and the G(Fe(CN)₆^3-] further reduces to 2.7. In the presence of chloride ions, SO₄^._ converts them to chloride atoms which react with H₂O₂ and ferrocyanide and the G[Fe(CN)₆^3-] is again increased to 4.3. The reaction of OH with SO₂ was observed only at high concentrations of SO₂ since the reaction of OH with ferrocyanide is very fast. The importance of water and ammonia in the conversion of sulphur dioxide to sulphuric acid probably lies in their reaction with SO₄^2- to form H₂SO₄ or (NH₄)₂SO₄.     

Oxidization of SO2 by Reactive Oxygen Species for Flue Gas Desulfurization and H2SO4 Production

A strong ionization dielectric barrier discharge was used to produce a high concentration of reactive oxygen species that were then injected into a simulated flue gas in a duct to remove SO₂ by oxidation. Sulfuric acid (H₂SO₄) was produced through the following two reactions: (1) O₃ oxidation of SO₂–SO₃, which then reacted with H₂O to produce H₂SO₄; and (2) reaction of O₂ ⁺ with H₂O to produce ·OH radicals, which then rapidly and non-selectively oxidized SO₂–H₂SO₄. When the molar ratio of reactive oxygen species to SO₂ was 4:1, the SO₂ removal efficiency was 94.6%, the energy consumption per cubic meter of flue gas was 13.3 Wh/m³, the concentration of recovered H₂SO₄ was 4.53 g/l, and the H₂SO₄ recovery efficiency was 28.8%. The H₂O volume fraction in the simulated flue gas affected the SO₂ removal efficiency, whereas the O₂ and CO₂ volume fractions did not. These results prove that oxidation by reactive oxygen species is a feasible method for flue gas desulfurization.     

氧化环境和比例对改性Hummers法制备GO的影响

以鳞片石墨(GR)为原料,采用改性Hummers法液相氧化方法制备氧化石墨,通过超声剥离的方法剥离出片状的氧化石墨烯(GO),探讨了H₂SO₄环境与H₂SO₄+H₃PO₄混酸环境和KMnO₄与GR的比例对GO制备的影响。采用FTIR、UV、TG、XRD、SEM和XPS等分析手段对制备的GO进行分析。结果表明：GO外貌是呈褶皱片状,在片层上主要有C=O、C-OH、-COOH和C-O-C等官能团,以共价键形式存在石墨层间;通过TG与XPS数据分析表明在H₂SO₄ H₃PO₄混酸环境下制备的GO含氧官能团较多,并且(KMnO₄)与鳞片石墨的最佳比例是1:4。     

Bis{bis­[5‐tert‐butyl‐2‐oxido‐3‐(1‐pyridinio­methyl)­phenyl]­methane}­dioxouranium bis­(tri­fluoro­methane­sulfonate) pyridine disolvate: a uranyl bis­(diphenoxide) complex resulting from homooxacalixarene cleavage

The title compound, [UO₂(C₃₃H₃₈N₂O₂)₂](CF₃SO₃)₂·2C₅H₅N, has been obtained by reaction of U^IV tri­fluoro­methane­sulfonate with p‐tert‐butyl­tetrahomodioxacalix­[4]­arene in pyridine. The uranyl ion lies on an inversion centre and is bound to two O atoms from each diphenoxide ligand, which gives the usual square‐planar equatorial environment. The zwitterionic diphenoxide species results from nucleophilic attack by pyridine on the benzylic ether C atoms of the homooxacalixarene, assisted by initial U coordination to the ether groups, with subsequent metal oxidation giving the uranyl moiety.     

On the decay of H and D atoms in aqueous sulphuric acid glasses. Isotope effects

Glassy samples of a mixture of 9.16 M H₂SO₄ in H₂O and 9.16 M D₂SO₄ in D₂O were X-irradiated at 77 K. ESR-measurements showed that the decay of D atoms was considerably faster than the decay of atoms at 118 K. This isotope effect was even more pronounced when the decay of H atoms in 9.16 M H₂SO₄ and D atoms in 9.16 M D₂SO₄ were measured separately. At 77 K no isotope effects were found, neither with, nor without 1 M 2-propanol as an H-atom scavenger.     

A kinetic study of electron transfer from L-Ascorbic acid to sodium perborate and potassium peroxy disulphate in aqueous acid and micellar media

Kinetics of oxidation of L-ascorbic acid (H₂A) by sodium perborate (SPB) and peroxy disulphate (PDS) have been investigated in aqueous acid and micellar media. Reaction kinetics indicated first-order dependence on both |oxidant| and |H₂A|. Increase in ionic strength (μ) increased reaction rate only in H₂SO₄ media. Rate of SPB oxidation of H₂A has been accelerated by acidity in HNO₃ and HCl media while a decreasing trend is observed in HClO₄ and H₂SO₄ media. The results are interpreted by various theories of acidity functions. Reaction rate is enhanced by the addition of added |H₂O₂| indicating a H₂O₂ coordinated boron species to be active in the present system. In the absence of micelle, increase in |acid| altered the PDS(SINGLEBOND)H₂A reaction rate marginally (a very small positive effect with HClO₄ and negative effect with H₂SO₄). Most plausible mechanisms have been proposed on the basis of experimental results. Activation parameters evaluated for specific kinetic constants are in accord with outer sphere electron transfer mechanism. In SPB(SINGLEBOND)H₂A system, addition of anionic micelle (Sodium lauryl sulfate) increased the rate, stabilizing the cationic species in the transition state in all the acid media. Although rate of PDS oxidation of H₂A was catalyzed by TX and inhibited by SDS at critical micellar concentration (CMC) increase in |acid| (both HClO₄ and H₂SO₄) beyond 9.6 × 10⁻⁴ M decreased the rate of oxidation. This trend was explained due to the repulsive interaction of coanion, HA⁻, and negatively charged micellar species. © 1996 John Wiley & Sons, Inc.     

XPS study of the electronic structure of heterometallic complexes [Fe2MO(O2CCH3)6(H2O)3] · 3H2O (M = Co,Ni)

Heterometallic compounds of general formula [Fe ₂ ^III M^IIO(O₂CR)₆(H₂O)₃] · 3H₂O (R = CH₃, M = Co, Ni; R = CCl₃, M = Co, Ni) have been studied by XPS. The compounds have been identified as high-spin complexes with metal atoms in oxidation states M(II) and M(III). Analysis of the XPS data revealed the tendency of the XPS pattern and magnetic parameters of molecules to change with a change in the electronic nature of metal atoms. The assignment is based on the degree of covalence of the M-O bond. In chloro-substituted heterocomplexes, electron density delocalization on the metal atoms with metal-to-ligand charge transfer through three bonds (M-O-C-C) is observed. The substitution in terminal groups leads to the change in the electron density distribution between the carboxylate and terminal groups.     

Enhanced activity and SO2 resistance of Co-modified CeO2-TiO2 catalyst prepared by facile co-precipitation for elemental mercury removal in flue gas

The Co-modified CeO₂-TiO₂ catalyst prepared by facile co-precipitation was used for efficient elemental mercury oxidation in flue gas. Results indicated that Co doping greatly enhanced the activity and SO₂ resistance of the CeO₂-TiO₂ catalyst. In the presence of 5% O₂, 500 ppm NO, 800 ppm SO₂ and 3% H₂O at 200 °C, the Hg⁰ removal efficiency of CeCo₃/Ti could maintain at about 87% for a relatively long time. Characterizations of catalysts (BET, XRD, Raman spectroscopy, TEM, H₂-TPR, O₂-TPD, XPS, TG-MS and SO₂-DRIFTS) were carried out to reveal the mechanism of Co modification on the redox ability, SO₂ resistance and resultant mercury oxidation removal performance of catalyst. It was found that an interaction of Ce with Co promoted the dispersion of CeO₂, increased chemisorbed oxygen concentration, and improved the oxygen storage capacity and the reducibility of catalyst, which was beneficial to the improvement of Hg⁰ oxidation removal. Hg⁰ would adsorb onto the catalyst and react with surface active oxygen species replenished by gas-phase O₂ to be oxidized via Mars-Maessen mechanism. SO₂ consumed the surface active oxygen species and resulted in the reduction of Ce⁴⁺ to Ce³⁺, which induced the deactivation of catalyst. The introduced Co in CeO₂-TiO₂ catalyst exerted the function of protecting Ce⁴⁺ from being poisoned by SO₂ and thus promoted the sulfur resistance and Hg⁰ removal performance of the catalyst in the presence of SO₂.     

Kinetics of the Oxidation of Monosaccharides with Acidic Bromate and N-Bromosuccinimide

Abstract

In earlier studies on the oxidation of monosaccharides, we measured the rates of the oxidation of three aldohexoses, two ketohexoses and three aldopentoses with V(V),¹ Ce(IV)²Cr(VI)³ and MII(VII).⁴We now report on the corresponding oxidations with bromate ion and N-bromosuccinimide (NBS) as oxidants. To our knowledge, only kinetic studies of oxidations of ribose with BrO₃-in aqueous H₂O₄ ⁵ and aldoses with NBS in 10% AcOH - H₂SO₄ ⁶ have been reported. Because oxidation of carbohydrates is subject to HSO₄- ion catalysis, HClO₄ was used, as in our earlier studies, in the present investigation to minimize the number of different catalyzing species.     

Development of SO2–O2 system as an oxidant at uranium leaching processes

The oxidation of Fe²⁺ in uranium leaching solutions with gaseous mixture of SO₂ and air has been studied. The variables studied include H₂SO₄ concentration, temperature, SO₂ concentration and time. The oxidation rate was founded to increase greatly with an increase in the solution temperature. The almost total oxidation of Fe²⁺ is readily achieved at 95 °C. By appropriately adjusting the temperature of solution and SO₂/O₂ in the gas, oxidation of ferrous ion and generation of sulphuric acid can be carried out. It was founded that solutions produced by such oxidation processing are very suitable for the uranium ore leaching.     

Oxidation of chloride to chlorine in aqueous solution via redox catalysis

This study reports evidence for the generation of chlorine from NaCl as starting material when aqueous-solution oxidizing materials such as Ce(SO₄)₂·4H₂O, Suprox (perisophthalic acid), MPPA (monoperoxyphthalic acid) and NaBO₃·4H₂O are brought in contact with catalytic amounts of powdered RuO₂. Cl₂ evolution takes place, showing that very low energy losses occur when a suitable redox catalyst mediates the oxidation step.     

Double sulphates of plutonium(III) and lanthanides with sodium

Sodium plutonium double sulphate monohydrate, NaPu(SO₄)₂ · H₂O and its lanthanide isomorphs NaLn(SO₄)₂ · H₂O (Ln ≡ Y, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm and Yb) were synthesized and characterised by chemical and X-ray diffraction methods. All these compounds belonged to the same structural family where the Pu³⁺ or Ln³⁺ ion is coordinated to nine oxygen atoms. The structure of NaPu(SO₄)₂ · H₂O was found in the present work to be isomorphous with NaCe(SO₄)₂ · H₂O reported in the literature. The unit cells of all the lanthanide compounds showed regular contraction with atomic number.     

Ionization-recombination equilibrium in cold cluster plasma under conditions of retardation by high energy barrier

The kinetics of charge separation in a cold plasma was studied with the degradation reaction in molecular clusters HCl(H₂O) _n + m(H₂O) ? H₃O⁺(H₂O) _{n + m ?1}Cl^?, taken as an example, which precedes chlorine adsorption on the ice surface in the stratosphere. The formation of a vast population of H⁺, Cl^? ion pairs stabilized in water clusters ensures the intense binding of chlorine in ice microcrystals that occur in stratospheric clouds. The accumulation of chlorine in the stratosphere is recognized as the main cause of the destruction of the protective ozone layer. The ion buildup effect is a result of the balance between opposite ionization and recombination processes in the presence of a high energy barrier that retards ion recombination in water clusters. A kinetic equation for the process was obtained and its solution was analyzed. The parameters of the barrier were calculated by computer simulation.     

Pd-Cu-Clx/Al2O3催化剂对CO氧化的稳定性

CO催化氧化广泛应用于空气净化、机动车尾气治理和CO气体传感器中.在CO氧化催化剂设计与制备过程中,催化剂与使用环境密切相关.例如工业和机动车尾气净化需要在高温(200–600°C)下进行,而对于半密闭空间(隧道或者地下停车场)空气净化需要在室温和高相对湿度下进行.频繁冷启动导致半密闭空间CO浓度累积而超过排放控制标准,因此制备室温、高相对湿度下CO氧化催化剂是面临的重要问题之一.负载型Wacker催化剂对于CO低温催化氧化的研究一直受到广泛关注.环境中少量水的存在会促进负载型Wacker催化剂对CO的低温氧化性能,但随着水沉积量的增加,活性位点将被覆盖,并且Pd和Cu活性组分之间的紧密结构被破坏,从而导致催化剂的失活,即催化剂的稳定性变差.因此,为了提高催化剂在高相对湿度下的稳定性,利用二乙氧基二甲基硅烷对Al2O3载体进行硅烷化处理,以增加载体的疏水性,考察载体疏水改性对CO低温氧化过程中催化剂稳定性的影响.催化剂的稳定性测试结果表明,在0°C,100%相对湿度条件下,未改性催化剂在约20 h内CO转化率由81%下降到50%;载体硅烷化后制备的催化剂在反应进行150 h后,CO转化率仍保持在78%,即反应活性未见降低.由此表明催化剂载体经有机硅烷改性后,可显著增强催化剂在低温、高相对湿度下的稳定性.N2吸附/脱附和水吸附实验结果表明,载体硅烷化改性并未对催化剂的比表面积产生影响,但显著降低了催化剂上水沉积速度和沉积量,未改性催化剂的初始吸水速度是改性后催化剂的4倍,但改性后催化剂的饱和吸水率仅占未改性催化剂的1/3.X射线衍射结果表明,载体预处理后活性物种Cu2(OH)3Cl晶粒尺寸有所增加.氢气程序升温还原、X射线光电子能谱结果表明,载体硅烷化预处理改善了催化剂中Cu和Pd物种的化学分布及接触状态,增加了与Pd物种紧密接触的Cu物种的量,从而促进了Cu物种的还原.与此同时,载体硅烷化显著降低了催化剂表面Cl离子的浓度,从而影响到对CO吸附.为了进一步研究水与催化剂稳定性之间的关系,采用原位红外漫反射(In situ DRIFT)对催化剂进行表征.负载型Wacker催化剂对CO氧化反应机理为:Pd是CO氧化反应的活性中心,通过Pd和Cu物种之间的氧化还原循环来实现CO氧化,且Pd+比Pd2+具有更高的CO氧化性能.反应气氛中水的存在,有利于CO在Pd+上氧化、以及金属态Pd被Cu2+物种再氧化的过程,同时水也显著促进了催化剂表面碳酸盐的生成以及抑制了活性物种Pd+生成.与表面碳酸盐累积相比,水对于活性物种Pd+生成的抑制作用是导致催化剂活性降低的主要原因.     

Protonation of homotroponeiron tricarbonyl and cyclooctatrienoneiron tricarbonyl complexes

2,3-Homotroponeiron tricarbonyl, 8-methyl- and 8,8-dimethyl-2,3-homotroponeiron tricarbonyl complexes have been shown to undergo O-protonation in trifluoroacetic (TFA) and 96% sulfuric acids. In the latter acid the O-protonated cations rearrange to give the thermodynamically more stable C-protonated isomers. Cyclooctatrienoneiron tricarbonyl undergoes protonation H₂SO₄ to give the same cation as was obtained from the protonation of the homotroponeiron tricarbonyl complex in H₂SO₄. On the basis of reaction in D₂SO₄, it is suggested that the kinetically preferred site of protonation of the cyclooctatrienone complex is at C(2) one of the coordinated carbon atoms.     

New Structure Type among Octahydrated Rare‐Earth Sulfates, β‐Ce2(SO4)3·8H2O,and a new Ce2(SO4)3·4H2O Polymorph

Syntheses, crystal structures and thermal behavior of two new hydrated cerium(III) sulfates are reported, Ce₂(SO₄)₃·4H₂O ( I ) and β‐Ce₂(SO₄)₃·8H₂O ( II ), both forming three‐dimensional networks. Compound I crystallizes in the space group P2₁/n. There are two non‐equivalent cerium atoms in the structure of I , one nine‐ and one ten‐fold coordinated to oxygen atoms. The cerium polyhedra are edge sharing, forming helically propagating chains, held together by sulfate groups. The structure is compact, all the sulfate groups are edge‐sharing with cerium polyhedra and one third of the oxygen atoms, belonging to sulfate groups, are in the S–Oμ₃–Ce₂ bonding mode. Compound II constitutes a new structure type among the octahydrated rare‐earth sulfates which belongs to the space group Pn. Each cerium atom is in contact with nine oxygen atoms, these belong to four water molecules, three corner sharing and one edge sharing sulfate groups. The crystal structure is built up by layers of [Ce(H₂O)₄(SO₄)]_nⁿ⁺ held together by doubly edge sharing sulfate groups. The dehydration of II is a three step process, forming Ce₂(SO₄)₃·5H₂O, Ce₂(SO₄)₃·4H₂O and Ce₂(SO₄)₃, respectively. During the oxidative decomposition of the anhydrous form, Ce₂(SO₄)₃, into the final product CeO₂, small amount of CeO(SO₄) as an intermediate species was detected.     

OXIDATIVE ADDITION REACTIONS OF d8 COMPLEXES. I. CHLORINE OXIDATION OF TETRACHOLOROPALLADATE (II)

Abstract

The reaction of Na₂PdCl₄ with chlorine in aqueous acid solution proceeds in two stages: oxidation of the complex to a Pd(IV) species followed by a slower substitution reaction. The oxidation reaction is first order in complex and first order in chlorine. At high chloride concentration, a six-coordinate palladium(II) intermediate is formed, which is oxidised via an outer-sphere type mechanism. Oxidation of the chloroaquopalladium(II) species present at low chloride concentration occurs via a different mechanism, probably involving coordination of the oxidant in a ‘quasiinner-sphere’ mechanism.