“一锅法”合成离子液体1-乙基-3-甲基咪唑醋酸盐

以1-甲基咪唑,溴乙烷和乙酸铅为原料,采用"一锅法"合成了离子液体1-乙基-3-甲基咪唑醋酸盐,产率87%,其结构经UV,IR和元素分析确证。优化反应条件为:1-甲基咪唑100 mmol,n(溴乙烷):n(1-甲基咪唑):n(乙酸铅)=3.6:2.0:1.0,于60℃反应20 h。     

1-乙基-3-甲基咪唑四氟硼酸盐离子液体的量子化学研究

The results of the quantum chemistry study of the ionic liquid 1-ethyl-3-methylimidazolium tetrafluoroborate (EMIM+BF4-) were reported. The ab initio method and density functional theory (B3LYP method) was used to optimize the stable structure of the gas phase ion pair at the level of 6-311++G** basis set, respectively. An IR spectra for EMIM+BF4- were obtained through the vibrational analysis. The changes of atomic charge assignments have been investigated using the Natural Bond Orbital method. The computational results show that there exist hydrogen bonds and other weak interactions between the cation and the anion. Using counterpoise correction method to estimate the basis set superposition error, the interaction energy between the cation and anion is 346.78 kJ/mol.     

氯化1-乙基-3-甲基咪唑离子液体表面印迹聚合物的合成及其特异吸附和固相萃取性能研究

以氯化1-乙基-3-甲基咪唑(C₂mimCl)离子液体为模板分子, 甲基丙烯酸和乙二醇二甲基丙烯酸酯为双功能单体, 聚苯乙烯-二乙烯苯为载体, 制备了C₂mimCl表面印迹聚合物(C₂mimClMIP/PS-DVB). 采用红外、扫描电镜和Brunauer-Emmett-Teller分析技术对C₂mimClMIP/PS-DVB进行了表征. 通过静态吸附实验研究了C₂mimClMIP/PS-DVB对模板分子及其结构类似物的吸附行为和选择性识别特性. 结果表明, 聚合物对C₂mimCl和氯化1-丁基-3-甲基咪唑(C₄mimCl)两种离子液体有高度的选择性识别作用. 将C₂mimClMIP/PS-DVB作为固相萃取(SPE)剂制备成SPE柱, 并与高效液相色谱联用, 考察了C₂mimClMIP/PS-DVB的动态吸附性能. 结果表明, 在选定的参数条件下, SPE柱能够从结构类似物中选择性分离富集C₂mimCl和C₄mimCl, 且具备很好的稳定性和可再生性能. 将SPE柱用于地下水中C₂mimCl的分离富集, 显示出良好的实用性能.     

Ab Initio Calculation of Room Temperature Ionic Liquid 1-Ethyl-3-Methyl-Imidazolium Chlorocuprate (Ⅰ)

The Hartree-Fock method has been employed to investigate the electronic structures of EMIM (1-ethyl-3-methyl-imidazolium ), CuCl2-, Cu2Cl3-, CuCl32-, EMIM -CuCl2-, EMIM -Cu2Cl3-,and EMIM -CuCl32- pairs. Full optimization and frequency analyses of EMIM , CuCl2-, Cu2Cl3-, CuCl32-,eight initial EMIM -CuCl2-, six EMIM -Cu2Cl3-, and four EMIM -CuCl32- geometries have been carried out using Gaussian-94 soft-package at 6-31 G(d,p) basis set level for hydrogen, carbon, nitrogen, chlorine atoms and Hay-Wadt effective core potential for copper atom. The electronic structures of lowest energy of EMIM -CuCl2-, EMIM -Cu2Cl3-, EMIM -CuCl32-, single EMIM , CuCl2-, Cu2Cl3-, and CuCl32- have been comparatively studied. The calculated results showed that EMIM -CuCl2- pair conformer of lowest energy was five ring parallel to Cl-Cu-Cl with 3.2 (A) distance, EMIM -CuCl32- pair conformer of lowest energy was five ring parallel to CuCl32-plane with 3.4 (A) distance, and the optimized EMIM -Cu2Cl3- pair conformer of lowest energy was five ring perpendicular to Cl-Cu-Cl-Cu-Cl plane with 3.0 (A) distance between the terminal Cl atoms and the 5-ring of EMIM . The cohesion between cations and anions analyses suggested that all stationary points are minimum because of no appearing of imaginary frequency.The assigned frequencies were in agreement with the experimental report. The low energy of interaction because of the bulky asymmetry of EMIM and the charge dispersion of cation and anion leads to the low melting point of the ionic liquids, EMIM -CuCl2-, EMIM -Cu2Cl3-, and EMIM -CuCl32-. The interaction energy of EMIM -CuCl2-, EMIM -Cu2Cl3-, and EMIM -CuCl32- is 309.0 k J/mol, 316.8 k J/mol, and 320.2 k J/mol, respectively. The relationship of interaction energy via distance between cations and anions was also investigated by single point energy scan.     

壳聚糖在1-乙基-3-甲基咪唑醋酸盐溶液中的流变行为

离子液体1-乙基-3-甲基咪唑醋酸盐（[EMIM]Ac）对壳聚糖具有良好的溶解能力。利用新一代旋转流变仪哈克MARS-Ⅲ考察了壳聚糖-[EMIM]Ac溶液的稳态流变和动态流变性能。稳态流变结果表明：当低黏均分子量壳聚糖离子液体溶液的质量分数在3%以下时,溶液呈牛顿性流体特征,高于此质量分数时溶液呈假塑性流体特征;壳聚糖离子液体溶液的黏度、结构黏度指数随着温度升高而降低;在同一质量分数下,溶液黏度随壳聚糖黏均分子量的增大而增加,溶液的恒剪切活化能黏流活化能随着剪切速率的增大而降低。动态流变结果表明：溶液的储能模量和损耗模量随着温度的升高而下降,储能模量与损耗模量存在一个交叉点,该交叉点随着温度升高向高频区移动。     

1-正丁基-3-甲基咪唑溴化物离子液体TGA-FTIR研究

利用TGA-FTIR技术,研究了空气及氮气气氛下1-正丁基-3-甲基咪唑溴化物的热性能.结果表明,在不同的气氛下,在离子液体的沸点附近,存在一定的蒸汽压,随着温度的升高,1-正丁基-3-甲基咪唑溴化物主要以蒸气的形式汽化.在离子液体汽化过程中,未观察到离子液体发生明显的分解现象.在受热过程中,离子液体可能发生碳化作用,在空气气氛中,离子液体可能发生氧化作用,并且,离子液体的碳化速率与氧化速率基本接近.随着温度的升高,离子液体的氧化及碳化产物被进一步深度氧化.     

添加剂对离子液体凝胶聚合物电解质电化学性能的影响

本文采用1-乙基-3-甲基咪唑六氟磷酸盐(EMIPF₆)、六氟磷酸锂(LiPF₆)和偏氟乙烯-六氟丙烯共聚物(P(VdF-HFP))为原料制得P(VdF-HFP)-EMIPF₆-LiPF₆体系离子液体凝胶聚合物电解质,选取碳酸甲乙酯(EMC)、碳酸二甲酯(DMC)、碳酸二乙酯(DEC)以及碳酸乙烯酯(EC)和碳酸丙烯酯(PC)混合物(EC-PC)作为离子液体凝胶聚合物电解质的添加剂,分别研究了它们对聚合物电解质膜电化学性能的影响。结果表明：加入EC-PC的P(VdF-HFP)-EMIPF₆-LiPF₆电解质膜的电化学窗口达到4.6 V,锂离子迁移数为0.44,30 ℃时离子电导率为1.65 mS·cm^-1;而DEC、DMC、EMC对电解质膜的电化学稳定性、锂离子迁移数存在不良的影响,对离子电导率的提高不明显。研究了正极材料LiCoO₂在P(VdF-HFP)-EMIPF₆-LiPF₆+EC-PC电解质中的充放电循环性能,其首次放电比容量达到116.5 mAh·g^-1,充放电20次后,电池容量没有明显衰减。     

Ab Initio Calculation of Room Temperature Ionic Liquid 1-Ethyl-3-Methyl-Imidazolium Chlorocuprate （I）

The Hartree-Fock method has been employed to investigate the electronic structures of EMIM^＋（1-ethyl-3-methyl-imidazolium^＋）, CuCl2^-, Cu2Cl3^-, CuCl3^2-, EMIM＋^-CuCl2^-, EMIM^＋-Cu2Cl3^-, and EMIM^＋-CuCl3^2- pairs. Full optimization and frequency analyses of EMIM^＋, CuCl2^-, Cu2Cl3^-, CuC13^-, eight initial EMIM^＋-CuCl2^-, six EMIM^＋-Cu2Cl3^-, and four EMIM^＋-CuCl3^2- geometries have been carried out using Gaussian-94 soft-package at 6-31＋G（d,p） basis set level for hydrogen, carbon, nitrogen, chlorine atoms and Hay-Wadt effective core potential for copper atom. The electronic structures of lowest energy of EMIM^＋-CuCl2^-, EMIM＋-Cu2Cl3^-, EMIM^＋-CuCl3^2-, single EMIM^＋, CuCl2^-, Cu2Cl3^-, and CuCl3^2- have been comparatively studied. The calculated results showed that EMIM^＋-CuCl2^- pair conformer of lowest energy was five ring parallel to Cl-Cu-Cl with 3.2A distance, EMIM^＋-CuCl3^2- pair conformer of lowest energy was five ring parallel to CuCl3^2-plane with 3.4A distance, and the optimized EMIM^＋-Cu2Cl3^- pair conformer of lowest energy was five ring perpendicular to Cl-Cu-Cl-Cu-Cl plane with 3.0A distance between the terminal Cl atoms and the 5-ring of EMIM^＋. The cohesion between cations and anions is brought about by C-H. C1 hydrogen bonds that are reinforced by charge assistance. The frequency analyses suggested that all stationary points are minimum because of no appearing of imaginary frequency. The assigned frequencies were in agreement with the experimental report. The low energy of interaction because of the bulkyasymmetry of EMIM＋ and the charge dispersion of cation and anion leads to the low melting point of the ionic liquids, EMIM^＋-CuCl2^-, EMIM^＋-Cu2Cl3^-, and EMIM^＋-CuCl3^2-. The interaction energy of EMIM^＋-CuCl2^-, EMIM^＋-Cu2Cl3^-, and EMIM^＋-CuCl3^2- is 309.0 kJ/mol, 316.8 kJ/mol, and 320.2 kJ/mol, respectively. The relationship of interaction energy via distance between cations and anions was also investigated by single point energy scan.     

反相高效液相色谱检测法测定溴化1-乙基-3-甲基咪唑-水体系中青蒿素

建立了反相高效液相色谱(RP-HPLC)定量检测离子液体溴化1-乙基-3-甲基咪唑-水体系中青蒿素含量的方法.检测条件为:室温(25±1)℃,C18反向柱(250 mm×4.6 mm, 5 μm),以V(甲醇): V(0.01 mol/L HAc-NaAc溶液,pH=5.9)=60: 40混合溶液为流动相,流速0.5 mL/min,检测波长为260 nm.青蒿素浓度在5～30 mg/L之间线性回归方程为y=2.20326×107x-30928.7,相关系数r=0.9990.本方法回收率为100 2%;相对标准偏差(RSD)为0.42%.     

Theoretical Study on Ionic Liquid Based on 1-Ethyl-3-Methyl- Imidazolium Cation and Hexafluorophosphate or Tetrafluoroborate

The Hartree-Fock and DFT/B3LYP methods have been employed to investigate the electronic structures of 1-ethy1-3-methyl-imidazolium cation(EMIM~ ),BF_4~-,PF_6~-,EMIM~ -BF_4~-,and EMIM~ -PF_6~- using the Gaussian-94 soft-package at 6-31 G(d,p)basis set level for hydrogen,carbon,nitrogen,boron, phosphorus,and fluorine atoms.Comparison of the electronic structures of the lowest energy of EMIM~ - BF_4~- and EMIM~ -PF_6~- pairs,and single EMIM~ ,BF_4~- and PF_6~- showed that the optimized EMIM~ -BF_4~- and EMIM~ -PF_6~- pair conformers were BF_4~- and PF_6~- outside the 5-ring plane between the ethyl group and the methyl group.The cohesion of C—H…F hydrogen bond between cation and anion is reinforced by charge assistance.The interaction energy between EMIM~ and PF_6~- is 328.8 kJ/mol at the B3LYP level and 326.6 kJ/mol at the Hartree-Fock level,whereas that between EMIM~ and BF_4~- is 353.5 kJ/mol at the B3LYP level and 350.5 kJ/mol at the Hartree-Fock level.The low energy interactions caused by bulky asymmetric EMIM~ ,and charge dispersion of cation and anion give rise to the low melting point of ionic liquid EMIM~ -BF_4~- and EMIM~ -PF_6~-.The two hydrogen bonding models of single hydrogen bond formation,and the hydrogen transfer between C_2 in EMIM~ and F in BF_4~- or PF_6~- were principally depicted.     

甲醇对1-丁基-3-甲基咪唑四氟硼酸离子液体结构与性质影响的模拟研究

采用分子动力学模拟方法研究了298.15 K、0.1 MPa下摩尔分数为0.1-0.9 的甲醇对1-丁基-3-甲基咪唑四氟硼酸盐([BMIM][BF₄])结构与性质的影响. 获得了体系的密度、径向分布函数、配位数、自扩散系数、粘度和电导率, 模拟得到的密度值与实验值符合较好. 结果显示: 体系各组分之间的径向分布函数随甲醇摩尔分数的增加呈规律性变化; 体系内阴阳离子的自扩散系数随着甲醇摩尔分数的增加不断增大; 甲醇的加入削弱了阴阳离子之间的相互作用, 体系粘度随着甲醇摩尔分数的增加逐渐减小, 电导率不断增大. 分析空间分布函数得到体系中各组分的三维空间分布情况.     

Experimental Research on NO2 Viscosity and Absorption for (1-Ethyl-3-methylimidazolium Trifluoroacetate + Triethanolamine) Binary Mixtures

The viscosity (9.34–405.92 mPa·s) and absorption capacity (0.4394–1.0562 g·g⁻¹) of (1-ethyl-3-methylidazolium trifluoroacetate + triethanolamine) binary blends atmospheric pressure in the temperature range of 303.15–343.15 K and at different mole fractions of [EMIM] [TFA] have been carried out. The molar fraction of [EMIM] [TFA] dependence of the viscosity and absorption capacity was demonstrated. The addition of a small amount of [EMIM] [TFA] into TEA led to rapidly decreased rates of binary blends’ viscosity and absorption capacity. However, the viscosity and absorption of binary blends did not decrease significantly when [EMIM] [TFA] was increased to a specific value. Compared with the molar fraction of the solution, the temperature had no obvious effect on viscosity and absorption capacity. By modeling and optimizing the ratio of viscosity and absorption capacity of ([EMIM] [TFA] + TEA), it is proven that when the mole fraction of [EMIM] [TFA] is 0.58, ([EMIM] [TFA] + TEA) has the best viscosity and absorption capacity at the same time. In addition, at 303.15 K, ([EMIM] [TFA] + TEA) was absorbed and desorbed six times, the absorption slightly decreased, and the desorption increased.     

氯化钽在离子液体1-丁基-3-甲基咪唑六氟磷酸盐中电化学行为

采用循环伏安法,研究了0.25 mol/L TaCl₅在离子液体1-丁基-3-甲基咪唑六氟磷酸盐([Bmim]PF₆)中的电化学行为。 实验结果表明,电沉积钽是受扩散控制、两步骤的不可逆电极反应过程,首先是Ta(Ⅴ)还原为Ta(Ⅲ),其次是Ta(Ⅲ)还原为金属钽和形成其它低价钽氯化物。 Ta(Ⅴ)/Ta(Ⅲ)和Ta(Ⅲ)/Ta在离子液体[Bmim]PF₆中的阴极传递系数分别为0.155和0.406。 Ta(Ⅴ)在离子液体[Bmim]PF₆中的扩散系数为1.629×10^-9 cm²/s。 在100 ℃和-1.25 V条件下,采用恒电势法在铂片上电沉积钽,扫描电子显微镜照片和EDS分析表明,沉积物为钽和钽的低价氯化物。     

Electrochemical and Spectroscopic Study of EuIII and EuII Coordination in the 1-Ethyl-3-methylimidazolium Bis(trifluoromethylsulfonyl)imide Ionic Liquid

Separation processes based on room temperature ionic liquids (RTIL) and electrochemical refining are promising strategies for the recovery of lanthanides from primary ores and electronic waste. However, they require the speciation of dissolved elements to be known with accuracy. In the present study, Eu coordination and Eu^III/Eu^II electrochemical behavior as a function of water content in 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIm][NTf₂]) was investigated using UV–visible spectrophotometry, time-resolved laser fluorescence spectroscopy, electrochemistry, and X-ray absorption spectroscopy. In situ measurements were performed in spectroelectrochemical cells. Under anhydrous conditions, Eu^III and Eu^II were complexed by NTf₂, forming Eu−O and Eu−(N,O) bonds with the anion sulfoxide function and N atoms, respectively. This complexation resulted in a greater stability of Eu^II, and in quasi-reversible oxidation–reduction with an E₀’ potential of 0.18 V versus the ferrocenium/ferrocene (Fc⁺/Fc) couple. Upon increasing water content, progressive incorporation of water in the Eu^III coordination sphere occurred. This led to reversible oxidation–reduction reactions, but also to a decrease in stability of the +II oxidation state (E₀’=−0.45 V vs. Fc⁺/Fc in RTIL containing 1300 mm water).     

添加剂对离子液体中电沉积金属钴的影响

在含有氯化钴的室温离子液体氯化1-甲基-3-乙基咪唑(EMIC)和乙二醇(EG)体系中,采用扫描电子显微镜(FE-SEM）、阴极极化曲线、循环伏安及X射线衍射等方法研究了添加剂对电沉积金属钴的影响。结果表明,在EMIC-EG-CoCl₂熔盐中加入丁炔二醇能够有效地改善钴镀层的外观质量,丁炔二醇的加入量在0.3～0.7 g·L^-1范围内,能够得到银灰色、具有金属光泽的良好镀层。从FE-SEM照片可以看出,在EMIC-EG-CoCl₂熔盐中加入丁炔二醇后,使金属钴的结晶变得更加细致;阴极极化曲线表明,丁炔二醇的加入不仅增大了阴极极化,而且还消除了钴的欠电势沉积;循环伏安测试证明,添加剂的加入对阴极沉积过程有阻化作用;XRD分析证实,丁炔二醇的加入使金属钴的衍射峰变宽,晶粒尺寸为纳米级。     

Viscosity of ionic liquid mixtures of 1-alkyl-3-methylimidazolium hexafluorophosphate + CO2

The viscosities of the mixtures 1-hexyl-3-methylimidazolium hexafluorophosphate ([HMIM][PF₆]) + CO₂ and 1-octyl-3-methylimidazolium hexafluorophosphate ([OMIM][PF₆]) + CO₂ were measured with a rolling ball viscometer. The CO₂ mole fraction for one mixture ranged up to 0.434 and the other up to 0.447. The viscosities were measured at 293.15-353.15 K and 10-20.0 MPa. The experimental uncertainty in viscosity was estimated to be within ±3.0%. The experimental data were compared with McAllister's three-body model, which correlated with the experimental data within average absolute deviations of 5.9%.     

Confinement Effects on the Magnetic Ionic Liquid 1-Ethyl-3-methylimidazolium Tetrachloroferrate(III)

Confinement effects for the magnetoresponsive ionic liquid 1-ethyl-3-methylimidazolium tetrachloroferrate(III), [C₂mim]FeCl₄, are explored from thermal, spectroscopic, and magnetic points of view. Placing the ionic liquid inside SBA-15 mesoporous silica produces a significant impact on the material’s response to temperature, pressure, and magnetic fields. Isobaric thermal experiments show melting point reductions that depend on the pore diameter of the mesopores. The confinement-induced reductions in phase transition temperature follow the Gibbs–Thomson equation if a 1.60 nm non-freezable interfacial layer is postulated to exist along the pore wall. Isothermal pressure-dependent infrared spectroscopy reveals a similar modification to phase transition pressures, with the confined ionic liquid requiring higher pressures to trigger phase transformation than the unconfined system. Confinement also impedes ion transport as activation energies are elevated when the ionic liquid is placed inside the mesopores. Finally, the antiferromagnetic ordering that characterizes unconfined [C₂mim]FeCl₄ is suppressed when the ionic liquid is confined in 5.39-nm pores. Thus, confinement provides another avenue for manipulating the magnetic properties of this compound.     

1-乙基-3-甲基咪唑丙氨酸离子液体热力学性质的研究

用中和法合成了氨基酸离子液体1-乙基-3-甲基咪唑丙氨酸([C₂mim][Ala]),并利用恒温环境的溶解反应热量计,在(288.15±0.01) K-(308.15±0.01) K温度范围内每隔5 K,测定不同质量摩尔浓度离子液体在水中的溶解焓(Δ_solH_m^θ).根据Archer的方法,通过线性拟合得到了该离子液体的标准摩尔溶解焓(Δ_sol),并计算了其相对表观摩尔溶解焓(^ΦL).在298.15 K下,根据Glasser经验方法得到了格子能U_POT = 566 kJ·mol^-1,并计算了其阴阳离子水化焓值(ΔH⁺ + ΔH^-) = -620 kJ·mol^-1及阴离子水化焓ΔH^-([Ala]^-) = -387 kJ·mol^-1.此外,估算了[C₂mim][Ala]水溶液的热容(C_p(sol))和表观摩尔热容(^ΦC_p).     

基于离子液体的硫酸根离子选择电极的研究

将离子液体BMIMPF6应用于传感膜中制备硫酸根选择性电极,研究发现离子液体在电极中不仅能够提高传感膜的介电常数和传导速率,还与硫酸根离子发生相互作用,起到载体的功能。利用离子液体和硫脲的协同作用制备的电位传感器,对硫酸根离子在10-5～10-2 mol/L范围内有能斯特响应,同时具有pH干扰小,重复性好,响应时间快等特点,能够用于环境和生物医疗检测。     

离子液体1-烷基-3-甲基咪唑四氟硼酸盐在水溶液中的聚集行为

采用等温滴定量热法、静态荧光猝灭法和电导法系统研究了典型离子液体1-烷基-3-甲基咪唑四氟硼酸盐([Cnmim][BF₄])在水溶液中的聚集行为, 获得了胶束形成的临界胶束浓度(cmc), 摩尔焓变(ΔH_mic), 摩尔吉布斯自由能变(ΔG_mic), 摩尔熵变(ΔS_mic)以及不同浓度时[Cnmim][BF₄]胶束的平均聚集数等基本参数. 发现这类离子液体的聚集为熵驱动, 阳离子的烷基链越长, ΔG_mic越负, 聚集更容易发生. 此外, 结合[C_nmim]X (X=Cl^-, Br^-)的相关研究发现, 阳离子相同时, 体积越大和疏水性越强的阴离子与头基的结合能力越强, 能有效地降低头基之间的静电排斥, 降低cmc, 利于胶束的形成. 对于[C₁₂mim][BF₄], 添加剂β-环糊精(β-CD)的加入可使cmc增大, ΔH_mic和ΔS_mic减小, 而KBF₄则可使cmc和ΔH_mic减小, ΔS_mic增大.