Theoretical study of ethynylbenzene adsorption on Au(111) and implications for a new class of self-assembled monolayer

Density functional calculations of the adsorption of ethynylbenzene on the Au(111) surface show that, after cleavage of the C-H bond, the terminal carbon makes a strong covalent bond to the surface. The bond energy is shown to be about 70 kcal.mol(-1) with the fcc hollow site being most stable and the molecule oriented perpendicular to the surface. Adsorption without elimination of hydrogen is also possible via a hydrogen 1,2 shift to form a vinylidene surface-bound species, or opening of the C-C triple bond and adsorption through the two carbon atoms in a flat conformation. The reaction energy for formation of the surface-bound vinylidene is estimated to be 5 kcal.mol(-1) exothermic relative to the isolated ethynylbenzene and gold substrate.     

Electrochemical and STM studies of 1-thio-β-D-glucose self-assembled on a Au(111) electrode surface

In this study, a Au(111) electrode is functionalized with a monolayer of 1-thio-β-D-glucose (β-Tg), producing a hydrophilic surface. A monolayer of β-Tg was formed on a Au(111) surface by either (1) potential-assisted deposition with the thiol in a supporting electrolyte or (2) passive incubation of a gold substrate in a thiol-containing solution. For each method, the properties of the β-Tg monolayer were investigated using cyclic voltammetry (CV), differential capacitance (DC), and chronocoulometry. In addition, electrochemical scanning tunneling microscopy (EC-STM) was used to obtain images of the self-assembled monolayer with molecular resolution. Potential-assisted assembly of β-Tg onto a Au(111) electrode surface was found to be complicated by oxidation of β-Tg molecules. The EC-STM images revealed formation of a passive layer containing honeycomb-like domains characteristic of a formation of S(8) rings, indicating the S-C bond may have been cleaved. In contrast, passive self-assembly of thioglucose from a methanol solution was found to produce a stable, disordered monolayer of β-Tg. Since the passive assembly method was not complicated by the presence of a faradaic process, it is the method of choice for modifying the gold surface with a hydrophilic monolayer.     

Experimental and DFT studies of gold nanoparticles supported on MgO(111) nano-sheets and their catalytic activity

A wet chemical preparation of MgO with the (111) facet as the primary surface has recently been reported and with alternating layers of oxygen anions and magnesium cations, this material shows unique chemical and physical properties. The potential to utilize the MgO(111) surface for the immobilization of metal particles is intriguing because the surface itself offers a very different environment for the metal particle with an all oxygen interface, as opposed to the typical (100) facet that possesses alternating oxygen anion and magnesium cation sites on the surface. Gold nanoparticles have demonstrated a broad range of interesting catalytic properties, but are often susceptible to aggregation at high temperatures and are very sensitive to substrate effects. Here, we investigate gold-supported on MgO(111) nanosheets as a catalyst system for the aerobic oxidation of benzyl alcohol. Gold nanoparticles deposited on MgO(111) show an increased level of activity in the solvent-free benzyl alcohol aerobic oxidation as compared to gold nanoparticles deposited on a typical MgO aerogel. TEM studies reveal that the gold nanoparticles have a hemispherical shape while sitting on the main surface of MgO(111) nanosheets, with a large Au-MgO interface. Given that the gold nanoparticles deposited on the two types of MgO have similar size, and that the two types of unmodified MgO show almost the same activities in the blank reaction, we infer that the high activity of Au/MgO(111) is due to the properties of the (111) support and/or those of the gold-support interface. To understand the binding of Au on low-index MgO surfaces and the charge distribution at the surface of the support, we have performed density functional theory (DFT) calculations on all low-index MgO substrates (with and without gold), using a model Au(10) cluster. Due to similar lattice constants of Au(111) and MgO(111) planes, the Au cluster retains its structural integrity and binds strongly on MgO(111) with either oxygen or magnesium termination. Furthermore, we have found that for the (001) and (110) substrates the charges of the ions in the top surface layer have similar values as in bulk MgO, but that on (111) surfaces these charges are significantly different. This difference in surface charge determines the direction of the electronic transfer upon adsorption of gold, such transfer occurring so as to restore the bulk MgO charge values. Using the results from theoretical calculations, we provide an explanation of our observations of increased catalytic activity in the case of the Au/MgO(111) system.     

In-situ infrared study of the adsorption and oxidation of oxalic acid at single-crystal and thin-film gold electrodes: a combined external reflection infrared and ATR-SEIRAS approach

The adsorption and oxidation of oxalic acid at gold electrodes were studied by in-situ infrared spectroscopy. External reflection experiments carried out with gold single-crystal electrodes were combined with internal reflection (ATR-SEIRAS) experiments with gold thin-film electrodes. These gold thin films, with a typical thickness of ca. 35 nm, were deposited on silicon substrates by argon sputtering. As previously reported for evaporated gold films, the voltammetric curves obtained in sulfuric acid solutions after electrochemical annealing show typical features related to the presence of wide bidimensional (111) domains with long-range order. The in-situ infrared data collected for solutions of pH 1 confirmed the potential-dependent adsorption of either oxalate (Au(100)) or a mixture of bioxalate and oxalate (Au(111), Au(110), and gold thin films) anions in a bidentate configuration. The better signal-to-noise ratio associated with the SEIRA effect in the case of the gold thin-film electrodes allows the observation of the carbonyl band for adsorbed bioxalate that was not detected in the external reflection experiments. Besides, additional bands are observed between 2000 and 3000 cm(-)(1) that can be tentatively related to the formation of hydrogen bonds between neighboring bioxalate anions. The intensities of these bands decrease with increasing solution pH values, disappearing for pH 3 solutions in which adsorbed oxalate anions are the predominant species. The analysis of the intensities of the nu(s)(O-C-O) and nu(C-OH) + delta(C-O-H) bands for adsorbed oxalate and bioxalate, respectively, suggests that the pK(a) for the surface equilibrium between these species is significantly lower than that for the solution equilibrium.     

Preparation of highly active silica-supported Au catalysts for CO oxidation by a solution-based technique

Although Au catalysts can be readily prepared on titania via the deposition-precipitation (DP) method, the direct application of the method similar to the preparation of silica-supported Au catalysts only results in diminished success. This paper reports a novel, efficient method to synthesize highly active Au catalysts supported on mesoporous silica (SBA-15) through a gold cationic complex precursor [Au(en)2]3+ (en = ethylenediamine) via a wet chemical process. The gold cationic precursor was immobilized on negatively charged surfaces of silica by a unique DP method that makes use of the deprotonation reaction of ethylenediamine ligands. The resulting mesoporous catalyst has been demonstrated to be highly active for CO oxidation at room temperature and even below 273 K, the activity of which is much superior to that of silica-supported Au catalysts previously prepared by various solution techniques. The pH value of the gold precursor solution plays a key role in determining the catalytic activity through the regulation of [Au(en)2]3+ deprotonation reaction and the surface interaction of silica with the gold precursor. This mesoporous gold silica catalyst has also been shown to be highly resistant to sintering because of the stabilization of Au nanoparticles inside mesopores.     

Silver residues as a possible key to a remarkable oxidative catalytic activity of nanoporous gold

Recently, several forms of unsupported gold were shown to display a remarkable activity to catalyze oxidation reactions. Experimental evidence points to the crucial role of residual silver present in very small concentrations in these novel catalysts. We focus on the catalytic properties of nanoporous gold (np-Au) foams probed via CO and oxygen adsorption/co-adsorption. Experimental results are analyzed using theoretical models represented by the flat Au(111) and the kinked Au(321) slabs with Ag impurities. We show that Ag atoms incorporated into gold surfaces can facilitate the adsorption and dissociation of molecular oxygen on them. CO adsorbed on top of 6-fold coordinated Au atoms can in turn be stabilized by co-adsorbed atomic oxygen by up to 0.2 eV with respect to the clean unsubstituted gold surface. Our experiments suggest a linking of that most strongly bound CO adsorption state to the catalytic activity of np-Au. Thus, our results shed light on the role of silver admixtures in the striking catalytic activity of unsupported gold nanostructures.     

Multipoint anchoring of the [2.2.2.2]metacyclophane motif to a gold surface via self-assembly: coordination chemistry of a cyclic tetraisocyanide revisited

A one-pot transformation of bis(2-isocyano-3-methylphenyl)ethane affords gram quantities of 8,16,24,32-tetraisocyano[2.2.2.2]metacyclophane ( 3). The solid state structure of 3 is remarkably close to the lowest energy conformation found on the potential energy landscape for 3 by DFT. In solution, the structure of metacyclophane 3 is mobile but can be locked in a rectangular gauche- anti- gauche- anti conformation by coordination of the isocyanide substituents to the [W(CO) 5] units to give [M] 4(mu 4-eta (1):eta (1):eta (1):eta (1)- 3) ( 5). The tetranuclear [M] 4(mu 4-eta (1):eta (1):eta (1):eta (1)- 3) motif featured in crystallographically characterized 5 may be present in several insoluble complexes of 3 previously described as mononuclear eta (4) species. A self-assembled monolayer of metacyclophane 3 is formed upon exposing a solution of 3 to the gold(111) surface with no precautions to exclude air or light. The monolayer nature of the film was confirmed by optical ellipsometry. The isocyanide stretching band for 3 shifts from 2119 cm (-1) in solution to 2175 cm (-1) upon chemisorption to metallic gold. The FTIR spectrum of the film indicates interaction of 3 with the gold surface via all four of its isocyanide anchors. No gold-facilitated oxidation of the -NC junctions was detected under ambient conditions. The energy cost associated with accessing the conformations of 3 suitable for mu 4-eta (1):eta (1):eta (1):eta (1) interaction of the molecule with the Au(111) surface is under 8 kcal/mol, a value that can be easily offset by formation of a gold-isocyanide bond. Two different mu 4-eta (1):eta (1):eta (1):eta (1) coordination arrangements of 3 with respect to gold atoms on the (111) face of the fcc Au lattice are suggested.     

In Situ dynamic monitoring of electrochemical oxidative adsorption and reductive desorption processes of a self-assembled monolayer of hexanethiol on a Au(111) surface in KOH ethanol solution by scanning tunneling microscopy

Electrochemical oxidative formation and reductive desorption processes of a self-assembled monolayer (SAM) of hexanethiol on a Au(111) surface in KOH ethanol solutions containing various concentrations of hexanethiol were investigated by in situ scanning tunneling microscopy in real time. The generation and disappearance of vacancy islands (VIs), corresponding to the formation and desorption of the SAM, respectively, were observed as anodic and cathodic current, respectively, flowed when the thiol concentration was higher than ca. 1 microM. When the VIs disappeared after the reductive desorption of the SAMs, the herringbone structure corresponding to the (radical3 x 23) structure of Au(111), was observed on the surface, indicating that a clean reconstructed surface was exposed even in the hexanethiol ethanol solution. During both oxidative adsorption and reductive desorption of the SAMs, the shape of the steps of the gold substrate changed drastically and the step lines became parallel to the 121 direction of the Au(111) surface, suggesting that gold atoms on the surface were extremely mobile during these processes. The coalescence of adjacent vacancy islands and growth of larger islands triangular in shape accompanied with the disappearance of nearby smaller islands were observed, confirming that the VIs grew according to the Ostward ripening model.     

电极/反相微乳液体系电沉积制备纳米金镀层

将含有氯化金的强酸性水溶液作为水相与Triton X-100、正己醇、正己烷组成反相微乳液体系, 并以该微乳液构成电极/反相微乳液电极系统, 利用电沉积方法成功地制备出纳米Au镀层. 循环伏安和交流阻抗对反相微乳液体系电沉积过程的研究发现, 微乳液中Au(III)的还原为完全不可逆过程, 其电化学反应的阻抗值约为具有相同表观浓度氯化金水溶液体系的5.5倍. SEM研究结果表明, 利用微乳液体系电沉积获得的金镀层由纳米Au颗粒组成, 直径为50 nm左右. 所制备的纳米Au修饰电极由于具有较大的比表面积, 其电化学性能优于纯Au电极, 该电极在酸性条件下有较好的析氢性能, 在碱性条件对丙三醇有较好的电催化氧化性能.     

Oxidation of an organic adlayer: a bird's eye view

The reaction of O(2) with an adlayer of the oligopyridine 2-phenyl-4,6-bis(6-(pyridine-2-yl)-4-(pyridine-4-yl)-pyridine-2-yl)pyrimidine (2,4'-BTP), adsorbed on the (111) surfaces of silver and gold and on HOPG--which can be considered as a model system for inorganic|organic contacts--was investigated by fast scanning tunneling microscopy (video STM) and dispersion corrected density functional theory (DFT-D) calculations. Only on Ag(111), oxidation of the 2,4'-BTP adlayer was observed, which is related to the fact that under the experimental conditions O(2) adsorbs dissociatively on this surface leading to reactive O adatoms, but not on Au(111) or HOPG . There is a distinct regiospecifity of the oxidation reaction caused by intermolecular interactions. In addition, the oxidation leads to a chiral ordering. The relevance of these findings for reactions involving organic monolayers is discussed.     

Dispersion of metallofullerene Y@C82 on bare, C60-modified, and iodine-modified Au(111) surfaces investigated with ECSTM

Two-dimensional (2D) assembling behaviors of the endohedral metallofullerene Y@C(82) on bare, C(60)-modified, and iodine-modified Au(111) surfaces have been investigated in 0.1 M HClO(4) solution employing electrochemical scanning tunneling microscopy (ECSTM). The results show that Y@C(82) molecules are mobile and aggregate to the terrace edges on bare and C(60)-modified Au(111) surfaces, but monodispersion of the Y@C(82) molecules is achieved on the iodine-modified Au(111) surface. The improvement of Y@C(82) dispersion on an iodine-modified gold surface is due to the strong Y@C(82)-substrate interactions. The modified-substrate method provides an effective strategy to disperse endohedral metallofullerenes.     

X-ray-induced production of gold nanoparticles on a SiO(2)/Si system and in a poly(methyl methacrylate) matrix

Prolonged exposure to X-rays of HAuCl(4) deposited from an aqueous solution onto a SiO(2)/Si substrate or into a poly(methyl methacrylate) (PMMA) matrix induces reduction of the Au(3+) ions to Au(0) and subsequent nucleation to gold nanoclusters as recorded by X-ray photoelectron spectroscopy. The corresponding major oxidation product is determined as chlorine {HAuCl(4)(ads) + X-rays --> Au(ads) + (3/2)Cl(2)(ads) + HCl(ads)}, which is initially adsorbed onto the surface but eventually diffuses out of the system into the vacuum. The reduced gold atoms aggregate (three-dimensionally) into gold nanoclusters as evidenced by the variation in the binding energy during X-ray exposure, which starts as 1.3 eV but approaches a value that is 0.5 eV higher than that of the bulk gold. The disappearance of the oxidation product (Cl2p signal) and the growth of the nanoclusters (related to the measured binding energy difference between the Si2p of the oxide and Au4f of the reduced gold) exhibit first-order kinetics which is approximately 3 times slower than the reduction of Au(3+), indicating that both of the former processes are diffusion controlled. Similarly, gold ions incorporated into PMMA can also be reduced and aggregated to gold nanoclusters using 254 nm deep UV irradiation in air evidenced by UV-vis-NIR absorption spectrocopy.     

Formation of ordered self-assembled monolayers by adsorption of octylthiocyanates on Au(111)

Self-assembled monolayers (SAMs) were formed by the spontaneous adsorption of octythiocyanate (OTC) on Au(111) using both solution and ambient-pressure vapor deposition methods at room temperature and 50 degrees C. The surface structures and adsorption characteristics of the OTC SAMs on Au(111) were characterized by scanning tunneling microscopy (STM) and X-ray photoelectron spectroscopy (XPS). The STM observation showed that OTC SAMs formed in solution at room temperature have unique surface structures including the formation of ordered and disordered domains, vacancy islands, and structural defects. Moreover, we revealed for the first time that the adsorption of OTC on Au(111) in solution at 50 degrees C led to the formation of SAMs containing small ordered domains, whereas the SAMs formed by vapor deposition at 50 degrees C had long-range ordered domains, which can be described as (radical3 x 2 radical19)R5 degrees structures. XPS measurements of the peaks in the S 2p and N 1s regions for the OTC SAMs showed that vapor deposition is the more effective method as compared to solution deposition for obtaining high-quality SAMs by adsorption of OTC on gold. The results obtained will be very useful in understanding the SAM formation of organic thiocyanates on gold surfaces.     

Surface electrochemistry of CO on reconstructed gold single crystal surfaces studied by infrared reflection absorption spectroscopy and rotating disk electrode

The electrooxidation of CO has been studied on reconstructed gold single-crystal surfaces by a combination of electrochemical (EC) and infrared reflection absorption spectroscopy (IRAS) measurements. Emphasis is placed on relating the vibrational properties of the CO adlayer to the voltammetric and other macroscopic electrochemical responses, including rotating disk electrode measurements of the catalytic activity. The IRAS data show that the C-O stretching frequencies are strongly dependent on the surface orientation and can be observed in the range 1940-1990 cm(-1) for the 3-fold bridging, 2005-2070 cm(-1) for the 2-fold bridging, and 2115-2140 for the terminal position. The most complex CO spectra are found for the Au(110)-(1 x 2) surface, i.e., a band near 1965 cm(-1), with the second, weaker band shifted positively by about 45 cm(-1) and, finally, a weak band near 2115 cm(-1). While the C-O stretching frequencies for a CO adlayer adsorbed on Au(111)-(1 x 23) show nu(CO) bands at 2029-2069 cm(-1) and at 1944-1986 cm(-1), on the Au(100)-"hex" surface a single CO band is observed at 2004-2029 cm(-1). In the "argon-purged" solution, the terminal nu(CO) band on Au(110)-(1 x 2) and the 3-fold bridging band on the Au(111)-(1 x 23) disappear entirely. The IRAS/EC data show that the kinetics of CO oxidation are structure sensitive; i.e., the onset of CO oxidation increases in the order Au(110)-(1 x 2) > or = Au(100)-"hex" > Au(111)-(1 x 23). Possible explanations for the structure sensitivity are discussed.     

Oxygen electroreduction through a superoxide intermediate on bi-modified Au surfaces

The mechanism of the electroreduction of oxygen on bare and Bi-submonolayer-modified Au(111) surfaces is examined using surface enhanced Raman scattering (SERS) measurements along with detailed density functional theory (DFT) calculations. The spectroscopy reveals the presence of superoxide-level species at potentials where oxygen is reduced. These species are not present in solutions absent either oxygen or Bi at these potentials. The spectroscopy also reveals the presence of Bi-OH species which are associated with peroxide reduction. Detailed calculations show oxygen associates much more strongly with Bi in the (2 x 2) configuration on Au(111) relative to the bare Au surface. Additionally, the O-O bond is elongated following O2 association, which follows as a consequence of Bi-O bond formation and partial oxidation of the Bi adatom. These results show for the first time that the four-electron electroreduction of oxygen electroreduction occurs via a series pathway on the Bi-modified surface in acid solution.     

Electrochemical metal deposition on top of an organic monolayer

Electrochemical deposition of metals (platinum or gold) only on top of an organothiolate, 1,4-benzenedimethanethiol (BDMT) or hexanedithiol (HDT), self-assembled monolayer (SAM) on a Au(111) substrate was achieved by electrochemical reduction of PtCl(4)(2-) or AuCl(4)(-) ion, which was preadsorbed on one free thiol end group of the dithiol SAM formed on a Au surface, in a metal-ion-free sulfuric acid solution at potentials more negative than the reduction potential of the metal ion. Angle-resolved X-ray photoelectron spectroscopy (AR-XPS) measurement after the reduction of preadsorbed PtCl(4)(2-) ion on BDMT/Au(111) electrode showed the presence of Pt not underneath but on top of the BDMT SAM. After a negative potential scan of the Pt/BDMT/Au(111) electrode to -1.30 V in 0.1 M KOH solution, a typical cyclic voltammogram of a clean Au(111) electrode was obtained, showing that the BDMT SAM with a Pt layer was reductively desorbed. These results proved that a Pt-BDMT SAM-Au substrate sandwich structure without a short circuit between the two metals was successfully constructed by this technique. Furthermore, a decanethiol (DT) monolayer was constructed on a Au layer, which was formed by the reduction of preadsorbed AuCl(4)(-) ion on HDT/Au(111) electrode. The formation of DT/Au/HDT/Au(111) structure was confirmed as two cathodic peaks corresponding to reductive desorption of DT from Au on top of the HDT/Au(111) at -0.97 V and that of Au/ HDT from Au(111) at -1.12 V were observed when potential was scanned negatively to -1.35 V.     

Electrocatalytic oxidation of formic acid and methanol on Pt deposits on Au(111)

This work presents characteristics of Pt deposits on Au(111) obtained by the use of spontaneous deposition and investigated by electrochemical scanning tunneling microscopy (EC-STM). On such prepared and STM characterized Au(111)/Pt surfaces, we studied electrocatalytic oxidation of formic acid and methanol. We show that the first monatomic layer of Pt displays a (square root 3 x square root 3)R30 degrees surface structure, while the second layer is (1 x 1). After prolonged deposition, multilayer Pt deposits are formed selectively on Au(111) surface steps and are 1-20 nm wide and one to five layers thick. On the optimized Au(111)/Pt surface, formic acid oxidation rates are enhanced by a factor of 20 compared to those of pure Pt(111). The (square root 3 x square root 3)R30 degrees-Pt yields very low methanol oxidation rates, but the rates increase significantly with further Pt growth.     

Theoretical study of NO adsorption on gold surfaces

The activities of neutral,anionic,and cationic Au(111),Au(100),and Au(310) surfaces,as well as an Au adatom on Au(111) surface towards NO adsorption have been studied by performing density functional theory calculations.It was found that the activity of gold increases as the coordination number of the gold atoms decreases,and that the cationic surfaces are generally more active than the neutral and anionic surfaces.The activity of Au surfaces towards NO adsorption is attributable to the presence of low coor...     

Surface‐Confined Electropolymerization of Methylene Blue on Gold Electrodes

We report on the electrochemical behaviour and electropolymerization of self‐assembled monolayers (SAMs) of methylene blue (MB) on gold electrodes. The SAMs of MB on gold electrodes were prepared by immersing the substrates into a solution of 1.0 mM MB in absolute ethanol for different times at room temperature. Cyclic voltammetry experiments exhibited that reductive desorption of MB monolayer takes place at three different potentials on polycrystalline gold electrodes, while reductive desorption of MB monolayer consists of only one peak on single crystal Au(111) substrates. Calculated charge densities for different immersion times indicated that optimal immersion time for self‐assembly of MB is 96 h. Electropolymerization of SAMs of MB on gold electrode was achieved by applying 0.95 V for 1 s in 0.1 M borate buffer solution (pH: 9.0). It was observed that poly(MB) monolayers are highly stable in acidic media. ATR‐FTIR and UV‐vis spectra exhibited differences between monomer and polymer monolayers, which are attributed to surface‐confined electropolymerization. STM image of poly(MB) monolayer on Au(111) substrate revealed a surface that is covered by well‐ordered, collateral nanowires with an average size of 3 nm.     

Au单晶表面氟表面活性剂FSN自组装膜的电化学行为

研究Au(111)和Au(100)表面非离子型氟表面活性剂FSN自组装膜的电化学行为.电化学扫描隧道显微术和循环伏安法测试表明,在0～0.8 V电位区间,FSN自组装膜未发生氧化还原,均一性好,可稳定地存在于电极表面,并显著抑制硫酸根离子在电极表面的吸附和Au单晶表面的重构.在FSN自组装膜Au单晶电极的初始氧化阶段,Au(111)表面有少量突起,而Au(100)表面呈现台阶剧烈变化,但FSN自组装膜的吸附结构没有改变.与Au(100)表面相比,Au(111)表面形成的FSN自组装膜可更有效地抑制Au表面的氧化.