核-壳结构的氯化银/聚丙烯酰胺复合纳米粒子的制备与表征

用反相微乳液作为模板制备了核-壳结构的氯化锯／聚丙烯酰胺(AgCI／PAM)复合纳米粒子。透射电镜(TEM)证实复合粒子为核-壳结构，平均直径约100nm。扫描电子显微镜(SEM)和X射线衍射分析显示，平均粒径约50nm的AgCl均匀分散在聚合物中。FTIR谱图表明：AgO与PAM之间存在较强的相互作用。用能级探洲光谱(Energy Detected Spectrum，EDS)和润湿分散实验比较了不同方法改性的复合粒子的表面结构与润湿性能。     

Fabrication of Monodisperse ＂Core-Satellite＂ Nanostructures by DNA-Programming： a Novel Class of Superstructured Building Blocks for Hierarchical Nanoassembly

Monodisperse nanoparticle assembly with tunable structure, composition and properties can be taken as a superstructured building block for the construction of hierarchical nanostruc tures from the bottom up, which also represents a great challenge in nanotechnology. Here we report on a facile and controllable method that enables a high yield fabricatioa of uniform gold nanoparticle （AuNP） coresatellites with definable number （in average） of the satellite particles and tunable coretosatellite distance. The formation of the coresatellite nanostruc tures is driven by programmable DNAbasepairing, with the resulting nanocomplexes being isolatable via gel electrophoresis. By rationally controlling the DNA coverages on the core and shell particles, high production yields are achieved for the assembly/isolation process. As well, benefiting from a minimum DNA coverage on the satellite AuNPs, a strong affinity is observed for the asprepared coresatellites to get adsorbed on proteincoated graphene ox ide, which allows for a twodimensional hierarchical assembly of the coresatellite structures. The resulting hierarchical nanoassemblies are expected to find applications in various areas, including plasmonics, biosensing, and nanocatalysis. The method should be generalizable to make even more complicated and higherorder structures by making use of the structural programmability of DNA molecules.     

复合聚合物修饰的粉末微电极及其对亚硝酸根还原的催化

本论文简述用Nafion_Os(bpy) 3 2 + /PVP复合膜修饰的乙炔黑粉末微电极 ,以亚硝酸根还原为模型反应 ,实现从复合修饰及扩大电极比表面两方面改善电极性能的思路 .结果表明 ,它同时显示Nafion_Os(bpy) 3 2 + /PVP修饰电极对NO2 -及NO+ 双重富集并再生活性粒子NO+ 、防止中继体流失、加速膜中中继体传输、改变反应途径等复合修饰电极的多种功能以及粉末微电极的高比表面、高液相传质速度以及薄层效应的特性 .与平面修饰电极及裸粉末微电极相比 ,它明显提高了酸性溶液中亚硝酸根还原的可逆性、呈数量级地提高稳态极限电流密度以及NO2 -的检测指标 .     

Preparation of TiO2 Nanocrystals/Graphene Composite and Its Photocatalytic Performance

TiO2 nanocrystals/graphene （TiO2/GR） composite are prepared by combining flocculation and hydrothermal reduction technology using graphite oxide and TiO2 colloid as precursors. The obtained materials are examined by scanning electron microscopy, transition electron microscopy, X-ray diffraction, N2 adsorption desorption, and ultraviolet-visible diffuse spectroscopy. The results suggest that the presence of TiO2 nanocrystals with diameter of about 15 nm prevents GR nanosheets from agglomeration. Owing to the uniform distribution of TiO2 nanocrystals on the GR nanosheets, TiO2/GR composite exhibits stronger light absorption in the visible region, higher adsorption capacity to methylene blue and higher efficiency of charge separation and transportation compared with pure TiO2. Moreover, the TiO2/GR composite with a GR content of 30% shows higher photocatalytic removal efficiency of MB from water than that of pure TiO2 and commercial P25 under both UV and sunlight irradiation.     

Double Hydrothermal Synthesis of Graphene Supported TiO2（b） Nanosheets as Anode Materials for Lithium Ion Batteries

The synthesis of graphene supported TiO2（b） nanosheets by a double hydrother- mal method for lithium storage was reported. The titanate nanosheets synthesized by the first hydrothermal progress and the graphene oxide obtained by the oxidation of graphite were hydrothermally treated together to fabricate the TiO2（b）/graphene composite. The electrochemical measurements illustrate that the graphene supporter obviously improves the cyclic performance of TiO2（b）, which can be attributed to the better dispersion and the decrease of resistance for the TiO2（b） nanosheets in the composite.     

Liquid chromatography-electrochemical detection of ferro- and ferricytochrome c at a chemically modified gold electrode

Chemically modified electrodes, constructed by adsorption of 4,4'-dithiodipyridine onto a polyvinylferrocene-treated gold surface, were employed for the amperometric detection of cytochrome c following size-exclusion chromatography. The electrode response was nearly reversible, permitting quantitation both of the ferro-form of the protein at +0.15 V vs. Ag/AgCl and of the ferri-form at -0.15 V. The limit of detection for the reduced species was 3 pmol injected, and the response was linear over three orders of magnitude. Using the chemically modified electrode approach, cytochrome c monitoring was sufficiently selective that the compound could be determined in human plasma pretreated only by dilution and particulate filtration.     

A Self‐assembled L‐Cysteine and Electrodeposited Gold Nanoparticles‐reduced Graphene Oxide Modified Electrode for Adsorptive Stripping Determination of Copper

Glassy carbon electrode (GCE) modified with L‐cysteine and gold nanoparticles‐reduced graphene oxide (AuNPs‐RGO) composite was fabricated as a novel electrochemical sensor for the determination of Cu²⁺. The AuNPs‐RGO composite was formed on GCE surface by electrodeposition. The L‐cysteine was decorated on AuNPs by self‐assembly. Physicochemical and electrochemical properties of L‐cysteine/AuNPs‐RGO/GCE were characterized by scanning electron microscopy, atomic force microscopy, energy dispersive spectroscopy, Raman spectroscopy, X‐ray diffraction, cyclic voltammetry and adsorptive stripping voltammetry. The results validated that the prepared electrode had many attractive features, such as large electroactive area, good electrical conductivity and high sensitivity. Experimental conditions, including electrodeposition cycle, self‐assembly time, electrolyte pH and preconcentration time were studied and optimized. Stripping signals obtained from L‐cysteine/AuNPs‐RGO/GCE exhibited good linear relationship with Cu²⁺ concentrations in the range from 2 to 60 μg L⁻¹, with a detection limit of 0.037 μg L⁻¹. Finally, the prepared electrode was applied for the determination of Cu²⁺ in soil samples, and the results were in agreement with those obtained by inductively coupled plasma mass spectrometry.     

Y2O3纳米粒子/碳纳米管复合体的制备及其催化高氯酸铵热分解

采用化学液相沉淀法制备Y2O3纳米粒子/碳纳米管复合体(Y2O3/CNTC),利用扫描电镜(SEM)和X 射线光电子能谱(XPS)对其结构和成分进行了表征. 结果表明, Y2O3纳米粒子能负载在碳纳米管上,且负载效果较好. 采用差热分析研究了Y2O3/CNTC 对高氯酸铵热分解的催化性能, 结果表明, Y2O3 /CNTC 可显著降低高氯酸铵(AP)的高温分解峰温,表现出对AP 高温分解良好的催化性能. 相同量的Y2O3/CNTC 和纯Y2O3纳米粒子进行对比, Y2O3 /CNTC表现出更强的催化性能.当Y2O3/CNTC的质量分数为4%时,使AP的高温分解峰温提前131.14C[deg].     

维生素B6在纳米金/石墨烯修饰电极上的电化学行为

将金纳米粒子电沉积在石墨烯修饰的玻碳电极表面,研究了维生素B6(VB6)在该修饰电极上的电化学行为。扫描电镜用于该修饰电极组装过程的形貌表征。实验结果表明:VB6在此修饰电极上出现一个良好的氧化峰,在最佳实验条件下,其氧化峰电流与VB6浓度在5.0×10-8～2.0×10-5 mol/L范围内呈线性关系,其线性回归方程为I(μA)=0.5697c(μmol/L)+0.06275,R=0.9992,检出限为2.0×10-8 mol/L(S/N=3)。一些常见的干扰物质如抗坏血酸不干扰VB6的检测。方法已用于片剂中VB6的含量的检测。     

Reactivity of ZrO(MFP) and ZrO(RP) Nanoparticles with LnCl3 for Solvatochromic Luminescence Modification and pH-Dependent Optical Sensing

The luminescence of the inorganic–organic hybrid nanoparticles ZrO(MFP) (MFP=methylfluorescein phosphate) and ZrO(RP) (RP=resorufin phosphate) was modified by addition of different rare earth halides LnCl₃. The resulting composite materials form dispersible nanoparticles that exhibit modified nanoparticle fluorescence depending on the rare earth ion. The resulting chromaticity of the luminescence is further variable by the employment of different solvents for ZrO(MFP)-based composite systems. The strong solvatochromic effect of the MFP chromophore leads to different luminescence chromaticities of the composite materials between green, yellow, and blue in THF, toluene, and dichloromethane, respectively. The luminescence of ZrO(RP)-based composite particles can be modified between the red and blue spectral regions in dependence on the applied reaction temperature. Beside a luminescence shift that is derived from nanoparticle modification by LnCl₃, a strong turn-on effect of ZrO(RP) particles results after contact with different Brønsted acids and bases in combination with a respective chromaticity shift. Both effects enable the potential employment of such particles as highly sensitive optical pH sensors.     

Remove of Heavy Metals(Cu2+, Pb2+, Zn2+ and Cd2+) in Water Through Modified Diatomite

At present, heavy metal pollution has become a major environmental problem, influencing the survival of human and other creatures. Developing heavy metal ion adsorbents, which are environment friendly, of low cost and good performance is one of the effective means to solve heavy metal pollution. Rich low-grade diatomite mineral, as raw material, was modified with calcium carbonate to improve the adsorption properties of diatomite for heavy metal ions. The effects of dosage(m), pH, adsorbing time(t), temperature(T) and concentration of adsorbent(c) on the removal rate of heavy metal ions(Cu²⁺, Pb²⁺, Zn²⁺ and Cd²⁺) were studied. The results show that under the suitable conditions, T=15 ℃, c=1.5 mmol/L, m=10 g/L, t=60 min, in a weak acid environment, the removal effect of the four kinds of metal ions by modified diatomite is the best.     

聚对氨基苯磺酸/石墨烯修饰玻碳电极伏安法测定痕量汞

制备了对氨基苯磺酸/石墨烯复合膜修饰电极,研究了汞在修饰电极上的电化学行为。 在0.1 mol/L、pH=4.0的磷酸盐缓冲液中,以此修饰电极为工作电极,在-1.2 V搅拌富集5 min,用差分脉冲伏安法测定0.31 V处的溶出峰电流。 结果表明,该电极显著提高了汞离子的电化学响应信号。 在优化条件下,峰电流与Hg2+的浓度在1.0×10-6~5.0×10-4 mol/L范围内呈良好的线性关系,相关系数为0.995。 方法的检出限为5.0×10-7 mol/L。 将该法用于水样中痕量汞的测定,回收率为92.2%~105.2%。     

核酸适体修饰纳米金-钌催化共振散射光谱法测定痕量Pb2+

用铅离子的特异性核酸适体（aptamer）修饰AuRu复合纳米微粒（AuRu的摩尔比为5:1）制备了铅离子的核酸适体纳米探针（AptAuRu）.在pH 7.0的Na2HPO4-NaH2PO4缓冲溶液及85 mmol/L NaCl存在下,AptAuRu纳米探针亦不聚集. 当Pb2+ 存在时,Pb2+可与探针中的aptamer形成较稳定的G-四分体结构,从而析放出AuRu复合纳米微粒并进一步聚集形成较大的微粒,导致592 nm处的共振散射光强度线性增大. 该反应液经0.15 μm滤膜过滤后,获得未反应的AptAuRu滤液. 滤液中的纳米微粒对氯酸钠-碘化钠反应具有较强的催化作用,其产物与阳离子表面活性剂形成缔合微粒,在472 nm处有一较强的共振散射峰. 随着Pb2+浓度增大,滤液中金钌纳米微粒浓度降低,其催化作用减弱,共振散射强度值降低. Pb2+浓度在0.12～60 pM范围与其共振散射强度降低值ΔI472nm呈线性关系,回归方程、相关系数分别为ΔI472nm =3.1C+7.3,0.9967, 检出限为0.08 pM Pb2+. 将本法用于废水中Pb2+的检测,其结果令人满意.     

纳米颗粒对Ni基复合镀渗层耐冲蚀性能的影响

采用复合镀渗工艺在316L不锈钢表面分别制备了两种纳米颗粒(非晶nano-SiO2颗粒和nano-SiC颗粒)增强的Ni基复合镀渗合金层. 利用扫描电子显微镜(SEM)和透射电子显微镜(TEM)观察了两种复合镀渗合金层的微观组织特征. 通过外加电位(+0.2 V)条件下的电流密度、冲蚀条件下的极化曲线和冲蚀后的交流阻抗谱表征了这两种复合镀渗层在单相流(3.5%(w, 质量分数)NaCl溶液)与料浆流(3.5%NaCl+10%(w)石英砂)中的电化学腐蚀特征, 并采用SEM观察两种复合镀渗层冲蚀后的截面形貌, 探讨这两种纳米颗粒增强的Ni基复合镀渗层在料浆流中的冲蚀机理. 电化学测试结果表明: 静态条件下, 电刷镀含纳米SiO2颗粒的复合镀渗层的耐蚀性能低于单一合金层, 而动态冲蚀条件下, 结果与之相反; 电刷镀含SiC颗粒的复合镀渗层的耐蚀性能在静态和动态冲蚀条件下均低于单一合金层. 对两种复合镀渗层的冲蚀截面形貌观察表明: 弥散分布的纳米SiO2颗粒能明显改善Ni基合金层的耐冲蚀性能; 而添加纳米SiC颗粒在渗金属过程中已完全分解, 导致三元硅化物(Cr6.5Ni2.5Si)和碳化物(Cr23C6)的析出, 而析出相在冲蚀过程易于脱落, 加速了Ni基合金层的质量流失.     

Zn掺杂CuO修饰电极的制备及电化学催化检测H_2O_2

利用滴涂法将Zn掺杂CuO纳米颗粒修饰到玻碳电极表面,通过循环伏安法和计时电流法,研究了Zn掺杂CuO纳米颗粒对H_2O_2的电催化性质。结果表明,制备了粒径为80~100nm的纳米颗粒,且分散良好。Zn掺杂CuO纳米颗粒修饰电极对H_2O_2具有良好的电催化还原作用。在pH=7.0的磷酸盐缓冲液中,当扫描速度介于20~350mV/s时,其氧化峰和还原峰电流均与扫描速度呈线性关系,说明电化学过程受吸附控制。探讨了支持电解质及pH值的影响,当H_2O_2的浓度在1.0×10~(-6)~6.3×10~(-3) mol/L浓度范围内时,还原峰电流与浓度呈良好的线性关系,检出限为0.1μmol/L。该传感器具有选择性高、重现性和稳定性好等特点。     

离子液体负载修饰磁性纳米材料的制备及用于水样中痕量镉离子的测定

以四氧化三铁(Fe3O4)为载体包覆二氧化硅涂层,用1-辛基-3-甲基咪唑六氟磷酸盐([OMIM]PF6)负载修饰,制备了一种功能化磁性纳米材料,采用扫描电镜、傅立叶变换红外光谱仪、振动样品磁强计和热重分析仪对材料进行表征。材料显示出良好的耐酸性,其对镉离子的吸附符合Langmuir方程。将该材料用作固相萃取吸附剂萃取富集水中的痕量镉离子,之后用火焰原子吸收法测定,建立了一种分离富集和检测Cd2+的新方法。实验考察了水样酸度、吸附剂用量、振荡和静置时间、洗脱剂及共存离子等对Cd2+回收率的影响。结果显示,在pH 6.0、振荡10 min、静置20 min条件下,该材料对Cd2+具有较好的吸附性,用1 mol/L盐酸可完全洗脱。在优化实验条件下,方法对Cd2+的检出限为0.2μg/L,对15μg/L Cd2+测定结果的相对标准偏差(RSD,n=6)为2.5%。对河水和湖水样品中的Cd2+进行检测,加标回收率为84%～100%。     

多臂碳纳米管/Nafion复合材料修饰玻碳电极测定痕量的铅离子

A composite material of nitric acid oxidized multiwalled carbon nanotube （MWNT） and Nation was prepared. Such composite was modified on a glassy carbon electrode to determine trace of lead by differential pulsed voltammetry. In pH=6.47 NaNO3 solution, Pb^2＋ ions were accumulated on the modified electrode at -0.4 V. Compared with a bare and a Nation film coated electrode, the composite coated GC electrode can reduce the accumulating potential and eliminate the toxic character of mercury. The calibration plots were linear at low concentration of 5.0× 10^-9-2.0× 10^-8 mol/L and high concentration of 2.5× 10^-8-5.0× 10^-6 mol/L. The performances characteristics indicate that the electrode can be used to determine trace Pb^2＋ ions.     

pH响应性树枝状聚合物-金纳米粒子复合药物载体的制备

以表面接枝聚乙二醇链的聚酰胺胺树枝状聚合物(PEG-PAMAM)为纳米载体, 在其内部空腔包覆金纳米粒子, 在金纳米粒子表面连接硫辛酸改性的阿霉素(LA-DOX), 从而间接实现了抗癌药物在PEG-PAMAM内的高效负载. 同时, LA-DOX中的酰腙键提供pH响应性, 实现了药物的pH响应性释放. 紫外-可见(UV-Vis)光谱表明, 包覆金纳米粒子的PEG-PAMAM纳米载体对LA-DOX的负载能力显著增强. 体外细胞实验表明, 负载LA-DOX的树枝状聚合物-金纳米粒子复合药物载体具有较强的抗肿瘤能力.     

Biomimetic synthesis of titania nanoparticles induced by protamine

Protamine, a kind of cationic protein extracted from sperm nuclei, was employed for the first time in vitro to induce the formation of a titania/protamine nanoparticle composite from a water-stable titanium precursor, titanium(iv) bis(ammonium lactato) dihydroxide (Ti-BALDH). The resulting titania/protamine nanoparticle composite was extensively characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, and X-ray photoelectron spectroscopy (XPS). The titania/protamine nanoparticle composite was of amorphous structure, and exhibited a different morphology from those prepared by an alkali-catalyzed approach. The catalyzing and templating function of protamine involved in the synthesis of the nanoparticle composite is discussed, and a mechanism tentatively proposed. In addition, the effects of pH and temperature on the amount and size of as-prepared titania/protamine nanoparticle composite were systematically investigated.     

阳极溶出伏安法测定痕量汞的研究

痕量汞的测定方法有很多[1 ] 。原子吸收法虽然具有较高的灵敏性 ,但是仪器设备昂贵 ,分析步骤较繁琐。近年来 ,化学修饰电极阳极溶出伏安法在对汞痕量分析方面的研究报道也不少[2～3] ,测定的检测限一般在 1 0 - 6～ 1 0 - 9ｇ·ｍｌ- 1 ,但它容易产生记忆效应 ,洗脱不良。本文以玻碳电极为工作电极 ,在ＨＣｌ ＮａＣｌ Ｃｄ2 +中 ,示差脉冲阳极溶出伏安法 (ＤＰＳ)测定痕量汞 ,汞的平均回收率达80 %。1　实验部分1 1　主要仪器与试剂ＰＡＲ— 384极谱仪 (美国 ) ;三电极系统 :工作电极为玻碳电极 ,参比电极为Ａｇ/ＡｇＣｌ电极 ,对电极为…