卟啉酞菁模型化合物光致电子转移研究

本文采用时间相关单光子计数对卟啉酞菁ＴＴＰ－（ＣＨ２）ｎ－Ｐｃ模型化合物的光致电子转移进行了研究，发现激发Ｐｃ时，呈现单指数衰减，ｎ＝４时电子转移速率减小，活化能，重排能增加，电子转移效率下降，电子转移反应△ＧＣＳ与电荷分离活化络合物衰变速率ＫＣＴ，按以下规律：△Ｇ＾（５）ＣＳ〉△＾（３）ＣＳ〉△＾（４）ＣＳ〉△＾（２）ＣＳ，ｋ＾（２）ＣＳ〉ｋ＾（３）ＣＳ〉ｋ＾（４）ＣＳ〉ｋ＾（５）ｃｓ。其△Ｇ＾     

Direct Electrochemistry with Nitrate Reductase in Chitosan Films

Stable films made from chitosan (CS) on pyrolytic graphite (PG) electrode gave direct electrochemistry for incorporated enzyme nitrate reductase (NR). Cyclic voltammetry (CV) of NR‐CS films showed a pair of well‐defined and nearly reversible redox peaks at about ?0.430 V vs. SCE at pH 7.0 phosphate buffers, which was considered as the redox of FAD and heme‐ion. The electron transfer between NR and PG electrode was greatly facilitated in CS films. Integration of reduction peaks at different scan rates from 0.01 to 0.5 V s^?;1 gave nearly constant charge values, which is characteristic of thin‐larger‐electrochemical behavior. The pH of the solution strongly affected the direct electron transfer of NR‐CS films. EDTA accelerated the electron transfer, and it was proposed as a stimulant for the system. Reflectance absorption infrared spectra demonstrated that NR retained a nearly native conformation in CS films.     

Stepwise charge separation and charge recombination in ferrocene-meso,meso-linked porphyrin dimer-fullerene triad

A meso,meso-linked porphyrin dimer [(ZnP)(2)] as a light-harvesting chromophore has been incorporated into a photosynthetic multistep electron-transfer model for the first time, including ferrocene (Fc), as an electron donor and fullerene (C(60)) as an electron acceptor to construct the ferrocene-meso,meso-linked porphyrin dimer-fullerene system (Fc-(ZnP)(2)-C(60)). Photoirradiation of Fc-(ZnP)(2)-C(60) results in photoinduced electron transfer from the singlet excited state of the porphyrin dimer [(1)(ZnP)(2)] to the C(60) moiety to produce the porphyrin dimer radical cation-C(60) radical anion pair, Fc-(ZnP)(2)(*+)-C(60)(*-). In competition with the back electron transfer from C(60)(*-) to (ZnP)(2)(*+) to the ground state, an electron transfer from Fc to (ZnP)(2)(*+) occurs to give the final charge-separated (CS) state, that is, Fc(+)-(ZnP)(2)-C(60)(*-), which is detected as the transient absorption spectra by the laser flash photolysis. The quantum yield of formation of the final CS state is determined as 0.80 in benzonitrile. The final CS state decays obeying first-order kinetics with a lifetime of 19 micros in benzonitrile at 295 K. The activation energy for the charge recombination (CR) process is determined as 0.15 eV in benzonitrile, which is much larger than the value expected from the direct CR process to the ground state. This value is rather comparable to the energy difference between the initial CS state (Fc-(ZnP)(2)(*+)-C(60)(*-)) and the final CS state (Fc(+)-(ZnP)(2)-C(60)(*-)). This indicates that the back electron transfer to the ground state occurs via the reversed stepwise processes,that is, a rate-limiting electron transfer from (ZnP)(2) to Fc(+) to give the initial CS state (Fc-(ZnP)(2)(*+)-C(60)(*-)), followed by a fast electron transfer from C(60)(*-) to (ZnP)(2)(*+) to regenerate the ground state, Fc-(ZnP)(2)-C(60). This is in sharp contrast with the extremely slow direct CR process of bacteriochlorophyll dimer radical cation-quinone radical anion pair in bacterial reaction centers.     

Charge recombination versus charge separation in donor-bridge-acceptor systems

Optimizing the ratio of the rates for charge separation (CS) over charge recombination (CR) is crucial to create long-lived charge-separated states. Mastering the factors that govern the electron transfer (ET) rates is essential when trying to achieve molecular-scale electronics, artificial photosynthesis, and also for the further development of solar cells. Much work has been put into the question of how the donor-acceptor distances and donor-bridge energy gaps affect the electronic coupling, V(DA), and thus the rates of ET. We present here a unique comparison on how these factors differently influence the rates for CS and CR in a porphyrin-based donor-bridge-acceptor model system. Our system contains three series, each of which focuses on a separate charge-transfer rate-determining factor, the donor-acceptor distance, the donor-bridge energy gap, and last, the influence of the electron acceptor on the rate for charge transfer. In these three series both CS and CR are governed by superexchange interactions which make a CR/CS comparative study ideal. We show here that the exponential distance dependence increases slightly for CR compared to that for CS as a result of the increased tunneling barrier height for this reaction, in accordance with the McConnell superexchange model. We also show that the dependence on the tunneling barrier height is different for CS and CR. This difference is highly dependent on the electron acceptor and thus cannot solely be explained by the differences in the frontier orbitals of the electron donor in these porphyrin systems.     

Direct experimental observation of CS2OH.

The first experimental detection of CS(2)OH is reported. CS(2)OH was observed for about one microsecond after its formation, as an intact isolated species in the gas phase. It was generated by electron transfer to the CS(2)OH(+) ion, prepared in the source of a multisector mass spectrometer by suitable ion-molecule reactions. The vertical formation process allowed characterization of CS(2)OH by structural analysis of CS(2)OH(+). Theoretical calculations were performed at the B3LYP/6-311+G(2d,p) and CCSD(T)/aug-cc-pVTZ//B3LYP/6-311+G(2d,p) levels of theory. The computed structure and stability of CS(2)OH and CS(2)OH(+) as well as the energetics of the involved processes satisfactorily fit with the experimental results.     

CS/TPP纳米微胶囊的制备及其载药性能

利用离子凝胶法, 以三聚磷酸钠(TPP)为交联剂, 由壳聚糖(CS)制备了CS/TPP纳米微胶囊. 用红外光谱仪、扫描电镜和粒径分析仪进行了表征, 并以牛血清蛋白(BSA)作为模型药物, 考察了所制备的CS/TPP纳米微胶囊的包载和缓释性能. 结果表明, CS/TPP纳米微胶囊的红外光谱相对于CS和TPP的红外光谱发生了很大变化, 说明CS和TPP通过正负电荷吸引聚合成囊; 粒径分析表明, 离子凝胶法可以得到粒径约430 nm的均匀分散的壳聚糖纳米微胶囊, 经冷冻干燥后粒径变为300 nm左右; 微胶囊包封率最高可达79.74%, 模型药物的持续释放时间可达7 d以上.     

Drastic difference in lifetimes of the charge-separated state of the formanilide-anthraquinone dyad versus the ferrocene-formanilide-anthraquinone triad and their photoelectrochemical properties of the composite films with fullerene clusters

A long-lived charge-separated (CS) state, which can be observed even at 900 mus after laser excitation, has been attained in the formanilide-anthraquinone dyad (FA-AQ) in dimethyl sulfoxide, whereas the CS lifetime is shortened significantly to 20 ps in the ferrocene-formanilide-anthraquinone triad (Fc-FA-AQ). Such a drastic decrease in the CS lifetime by the addition of a ferrocene moiety to the FA-AQ dyad is ascribed to a decrease in the driving force of back electron transfer and an increase in the reorganization energy of electron transfer despite the longer charge-separation distance. The FA-AQ dyad and the Fc-FA-AQ triad have been employed as components of photovoltaic cells, where composite molecular nanoclusters of the FA-AQ dyad or the Fc-FA-AQ triad with fullerene (C60) are assembled onto a SnO2 electrode using an electrophoretic method. The composite films of the Fc-FA-AQ triad exhibit 10 times smaller values of an incident photon-to-photocurrent efficiency (IPCE) as compared with those of the FA-AQ dyad in accordance with a drastic decrease of the CS lifetime by addition of a ferrocene moiety to the FA-AQ dyad.     

Fundamental importance of the Coulomb hole sum rule to the understanding of the Colle-Salvetti wave function functional

In this paper we consider the general form of the correlated-determinantal wave function functional of Colle and Salvetti (CS) for the He atom. The specific form employed by CS is the basis for the widely used CS correlation energy formula and the Lee-Yang-Parr correlation energy density functional of Kohn-Sham density functional theory. We show the following: (i) The key assumption of CS for the determination of this wave function functional, viz., that the resulting single-particle density matrix and the Hartree-Fock theory Dirac density matrix are the same, is equivalent to the satisfaction of the Coulomb hole sum rule for each electron position. The specific wave function functional derived by CS does not satisfy this sum rule for any electron position. (ii) Application of the theorem on the one-to-one correspondence between the Coulomb hole sum rule for each electron position and the constraint of normalization for approximate wave functions then proves that the wave function derived by CS violates charge conservation. (iii) Finally, employing the general form of the CS wave function functional, the exact satisfaction of the Coulomb hole sum rule at each electron position then leads to a wave function that is normalized. The structure of the resulting approximate Coulomb holes is reasonably accurate, reproducing both the short- and the long-range behavior of the hole for this atom. Thus, the satisfaction of the Coulomb hole sum rule by an approximate wave function is a necessary condition for constructing wave functions in which electron-electron repulsion is represented reasonably accurately.     

气相离子-分子反应B2H3-+CS2——B2H3S-+CS的理论研究

用密度泛函方法B3LYP/6-311++G(d,p)和高级电子相关的偶合簇法CCSD(T)/6-311++G(d,p)研究了气相离子-分子反应B₂H₃^-+CS₂B₂H₃S^-+CS的机理.结果表明,B₂H₃最可能进攻CS₂中碳原子形成三元环中间体,随后通过氢迁移和最终消除CS的反应步骤形成硫原子转移产物H₃BBS^-+CS,反应大量放热且不需要活化能.B₂H₃直接对CS₂中硫原子进攻夺取硫原子的反应方式存在一定能垒阻碍.计算结果有助于深入了解B₂H₃,B₃H-6和B₄H₇^-等缺电子硼氢负离子的反应行为.     

Controlling electron transfer in donor-bridge-acceptor molecules using cross-conjugated bridges

Photoinitiated charge separation (CS) and recombination (CR) in a series of donor-bridge-acceptor (D-B-A) molecules with cross-conjugated, linearly conjugated, and saturated bridges have been compared and contrasted using time-resolved spectroscopy. The photoexcited charge transfer state of 3,5-dimethyl-4-(9-anthracenyl)julolidine (DMJ-An) is the donor, and naphthalene-1,8:4,5-bis(dicarboximide) (NI) is the acceptor in all cases, along with 1,1-diphenylethene, trans-stilbene, diphenylmethane, and xanthone bridges. Photoinitiated CS through the cross-conjugated 1,1-diphenylethene bridge is about 30 times slower than through its linearly conjugated trans-stilbene counterpart and is comparable to that observed through the diphenylmethane bridge. This result implies that cross-conjugation strongly decreases the π orbital contribution to the donor-acceptor electronic coupling so that electron transfer most likely uses the bridge σ system as its primary CS pathway. In contrast, the CS rate through the cross-conjugated xanthone bridge is comparable to that observed through the linearly conjugated trans-stilbene bridge. Molecular conductance calculations on these bridges show that cross-conjugation results in quantum interference effects that greatly alter the through-bridge donor-acceptor electronic coupling as a function of charge injection energy. These calculations display trends that agree well with the observed trends in the electron transfer rates.     

Preparation of chitosan/N-doped graphene natively grown on hierarchical porous carbon nanocomposite as a sensor platform for determination of tartrazine

In this work,the chitosan and N-doped graphene natively grown on hierarchical porous carbon(N-PC-G/CS) nanocomposite was obtained by ultrasonic method,as a novel sensor platform for determination of tartrazine(TT).The nanocomposite as prepared had well dispersivity in water and excellent conductivity.The N-PC-G/CS nanocomposite was characterized by scanning electron microscopy(SEM),transmission electron microscopy(TEM),nitrogen adsorption-desorption,fourier transform infrared(FTIR) and electrochemical impedance spectroscopy(EIS).The application of N-PC-G/CS for determination of tartrazine(TT) was investigated by chronocoulometry(CC),cyclic voltammetry(CV) and differential pulse voltammetry(DPV).Under optimized conditions,the sensor displayed a sensitive response to TT within a wide concentration range of 0.05-15.0 μmol/L,the detection limits is 0.036 μmol/L(S/N = 3).Furthermore,this nanocomposite could be efficiently applied for determination of TT in soft drink samples.     

Conformational and photophysical studies on porphyrin-containing donor-bridge-acceptor compounds. Charge separation in micellar nanoreactors

Photophysical studies with semi-rigid, 1, and flexible, 2, donor-bridge-acceptor (D-b-A2+) molecules with D a porphyrin and A2+ a methyl viologen moiety, were performed in neat polar solvents as well as included in surfactant (DTAB) aqueous and in reverse AOT/n-alkane micelles. The micelles acted as nanoreactors for the photoinduced electron transfer reaction upon laser excitation. In spite of the longer lifetime of the charge separated (CS) state in the semi-rigid tetrad 1(ca. 200 ns vs. ca. 100 ns for the flexible dyad 2), the CS formation quantum yield, for example in acetonitrile, was lower for the former (phi(CS) = 0.13) than for the latter (0.58). Comparison of the time-resolved fluorescence data in neat solvent and in the micelles yielded the phi(CS) values in the dilute micellar solutions. Application of laser-induced optoacoustic spectroscopy at various temperatures to 1 dissolved in a polar organic solvent (benzonitrile, BZN) included in aqueous DTAB nanoreactors afforded structural volume changes for the production in hundreds of ps of the CS state upon excitation of a polar molecule. The contraction during CS formation upon excitation of the collapsed conformer in BZN is attributed to the entering of solvent into the open molecular cavity. The opening upon formation of the CS state due to photoinduced electron transfer in the 1 collapsed conformation arises from the repulsion of the two positively charged ends in this state, as previously calculated. Inclusion of 1 in reverse AOT micelles in various n-alkanes also led to a contraction upon excitation, but the data had much more error due to the limited range of variability of the ratio of thermoelastic parameters. The data obtained with the more flexible "supermolecule" 2 showed the predicted large conformation flexibility of these molecules.     

Polymeric membranes based on cellulose acetate loaded with candle soot nanoparticles for water desalination

This study is concerned with modifying cellulose acetate (CA)/polyethylene glycol (PEG) membranes prepared via phase inversion technique in the presence of carbon nanoparticles; candle soot (CS) resulting from combusted candle. CS nanoparticles were analyzed via Fourier transform infrared spectroscopy and transmission electron microscopy. The developed membranes were characterized for their surface morphology, mechanical properties as well as thermal stability. CS nanoparticles contributed in improving the salt rejection % with a slight reduction in the water flux behavior. Employing the annealed cellulose acetate/polyethylene glycol membranes loaded with candle soot nanoparticles provides an adequate approach towards water desalination implementations.     

Effects of anionic surfactant SDS on the photophysical properties of two fluorescent molecular sensors

Two fluorescent molecular sensors CS1 and CS2 were designed and synthesized to probe the aggregate behavior of anionic surfactant SDS. CS1 was based on the photo-induced electron transfer (PET) mechanism, while CS2 was founded on the intramolecular charge transfer (ICT) mechanism. The photophysical properties of CS1–2 in anionic surfactant sodium dodecyl sulfate (SDS) solution were studied by fluorescence and UV–vis methods. The experimental results show that significant absorption and emission spectral responses of CS1 were observed with the addition of SDS: the absorbance and fluorescence intensity decreased first and then increased. The plot of fluorescence intensity of CS1 versus SDS concentration showed two break points, which might be ascribed to the critical micellar concentration (cmc) and the formation of premicelle (cac) aggregate, respectively. But the solution’s color of CS2 changed from yellow to red with increasing SDS concentrations. The large red-shift in both absorption (50 nm) and emission (55 nm) spectra of CS2 was resulted from the protonation of the electron accepting moiety (NC nitrogen), which enhanced the “push–pull” interaction of the ICT fluorophore. This was facilitated by the increase of local H⁺ concentration around SDS premicelle and micelle. As a consequence, pK_a values of CS1 and CS2 were elevated in SDS micelle.     

Oxidation of CS4 by AsBr4+: the unexpected formation of the simple CS2Br3+ carbenium ion

During the preparation of AsBr4(+)[Al(OR)4]-, the novel carbocation CS2Br3+ was synthesized by reaction of AsBr3, Br2, CS2, and Ag[Al(OR)4] (R=C(CF3)3). CS2Br3(+)[Al(OR)4]- was characterized by its crystal structure, NMR and IR spectroscopy, and quantum chemical calculations (including COSMO solvation enthalpies). Additional experiments as well as the computed thermodynamics indicated two likely reaction pathways: Ag(+) +2Br2 +CS2-->CS2Br3(+) +AgBr and the direct 4e- oxidation reaction AsBr4(+) +CS2-->CS2Br3(+) + 1/6As6Br6. Both reactions were observed experimentally and were calculated to be exergonic in solution by -226 and -56 kJ mol(-1) respectively. As a result of charge delocalization the C-S and C-Br distances in the cation are shortened by 0.06 to 0.08 A; the S--Br distances are also slightly shortened indicating a delocalization of the charge also to the bromine atoms in the (S--Br moieties. Based on an analysis of the cation-anion contacts as well as quantum chemical MP2 calculations, a delocalization model as a planar 10 pi electron system is discussed and the pi molecular orbitals are given. It will be shown that the electronic situation of CS2Br3+ is very close to that in CBr3+, that is, the properties of SBr moieties and Br atoms as pi donors towards a formal C+ center are comparable.     

Recent Developments on Understanding Charge Transfer in Molecular Electron Donor-Acceptor Systems

Charge transfer (CT) in molecular electron donor-acceptor systems is pivotal for artificial photosynthesis, photocatalysis, photovoltaics and fundamental photochemistry. We summarized the recent development in study of CT and discussed its application in thermally activated delayed fluorescence (TADF) emitters. The direct experimental proof of the spin multiplicity of the charge separated (CS) state with pulsed laser excited time-resolved electron paramagnetic resonance (TREPR) spectroscopy was discussed. Experimental determination of the electron exchange energy (J) of the CS state, with magnetic field effect on its yield or lifetime was introduced. The electron spin transfer accompanying the CT, studied with pulsed EPR spectra was briefly discussed. Tuning of the CT yield and kinetics with selective vibration excitation of the linker (the bridge) with IR pulse was presented. Above all, these studies show that there are more fun than simply monitoring the formation of the cations and anions and the kinetics or CS yields in this area.     

Ultrasound-Induced Formation of CdS Nanostructures in Oil-in-Water Microemulsions

In this study the formation of approximately spherical assemblies of nanocrystalline primary particles of CdS in a CS(2)-water-ethylenediamine (CWE) microemulsion induced by ultrasonic irradiation is described. CS(2) was employed as the sulfur source for CdS and also as the oil phase in the microemulsion. The particles were studied with X-ray powder diffraction, transmission electron microscopy, UV/Vis absorption spectroscopy, and photoluminescence spectroscopy. A blue shift compared to bulk CdS was observed in absorption and photoluminescence spectra. Copyright 2001 Academic Press.     

Synthesis and characterization of fullerene nanowhiskers by liquid-liquid interfacial precipitation: influence of C60 solubility

Fullerene nanowhiskers (FNWs) composed of C(60) fullerene molecules were prepared using the liquid-liquid interfacial precipitation (LLIP) method in the carbon-disulfide (CS(2)) and isopropyl alcohol (IPA) system. The electron microscopic images reveal the formation of non-tubular FNWs. The X-ray diffraction (XRD) pattern studies indicate the presence of fcc crystalline structure and unusual triclinic structure in the FNWs. The selected area electron diffraction pattern (SAED) analysis demonstrates the existence of triclinic and electron beam assisted fcc to tetragonal crystalline phase transformation. The formation of triclinic structure might be validated due to the partial polymerization of FNWs at C(60) saturated CS(2)-IPA interface. The high solubility of C(60) in CS(2) solvent system results in partial polymerization of FNWs. The polymerization of fullerene molecules in the FNWs has been further confirmed using Raman spectroscopy.     

Light‐Driven Charge Separation in Isoxazolidine–Perylene Bisimide Dyads

A series of arrays for light‐driven charge separation is presented, in which perylene tetracarboxylic bisimide is the light‐absorbing chromophore and electron acceptor, whereas isoxazolidines are colourless electron donors, the electron‐releasing properties of which are increased with respect to the amino group by means of the α‐effect. Charge separation (CS) in toluene over a distance ranging from ≈10 to ≈16 Å, with efficiencies of ≈95 to ≈50 % and CS lifetimes from 300 ps to 15 ns, are demonstrated. In dichloromethane the charge recombination reaction is faster than charge separation, preventing accumulation of the CS state. The effects of solvent polarity and molecular structure are discussed in the frame of current theories.     

Evaluating of reinforcing effect of Ceratonia Siliqua for polypropylene: Tensile,flexural and other properties

The aim of this study is to investigate the reinforcing effect of Ceratonia siliqua (CS) powder as a novel natural filler for polypropylene (PP) based composites. CS powder up to 20 wt% was filled into PP matrix by using high speed thermo kinetic mixer. Mechanical and thermal properties of CS filled PP based composites were investigated by tensile and three point bending test, dynamic mechanical analysis, thermogravimetric analysis, differential scanning calorimetry analysis, fourier transform infrared analysis, and thermomechanical analysis. Morphology of the composites was also investigated by scanning electron microscopy. By filling 5% and 10% of CS into PP, tensile strength and flexural strength of PP increased by about 32 and 23%, respectively. This indicates that CS has a great potential to be used as reinforcing filler for PP composites. CS filling into PP led to lower coefficient of thermal expansion values which could help preventing the thermal expansion.