Application of instrumental neutron activation analysis to study ceramic fragments from Damascus Castle site,Syria

Summary Thirty-three archaeological ceramic fragment samples from Damascus Castle archaeological site, Damascus city, Syria, were analyzed using instrumental neutron activation analysis (INAA). 36 elements were determined. These elemental concentrations have been processed using two multivariate statistical methods, cluster and factor analysis in order to determine similarities and correlation between the various samples. Factor analysis confirms that 84.8% of the ceramics samples classified by cluster analysis are correctly classified by cluster analysis. The results provided persuasive evidence that Castle pottery used at least four different clay sources. Moreover, by means of systematic local analysis it will be clear whether these sources are local or not.     

Diagnosis of lung cancer based on metal contents in serum and hair using multivariate statistical methods

The classification of normal and cancer groups with four multivariate methods according to metal contents in serum and hair samples has been discussed in the present paper. Results show that the four multivariate methods, stepwise discrimination analysis, principal components analysis, hierarchical cluster analysis, and stepwise cluster analysis can distinguish the two groups correctly. The independent samples of both normal and cancer groups were tested and can be distinguished correctly by the four methods. Therefore, these methods can be used as an aid for diagnosis of lung cancer according to the metal contents in serum and hair samples.     

Evaluation and discrimination of cortex Magnoliae officinalis produced in Zhejiang Province (Wen-Hou-Po) by UPLC-DAD-TOF-MS fingerprint

An ultra performance liquid chromatography tandem TOF mass spectrometric (UPLC-DAD-TOF-MS) fingerprinting method was developed for the quality control and source discrimination of Cortex magnoliae officinalis produced in Zhejiang Province (Wen-Hou-Po). Twelve samples of Wen-Hou-Po collected from two species in five areas in Zhejiang Province of China were used to establish the fingerprint. Data were evaluated statistically using similarity analysis, hierarchical cluster analysis (HCA) and discriminant analysis (DA) in order to establish a similarity standard of fingerprint for quality control of Wen-Hou-Po, then to classify the Wen-Hou-Po samples and to identify key categorizing parameters. The similarity indexes were all above 0.95 between the reference chromatogram and that of each sample. By comparing the UV and MS data with those of the authentic standards and literature, nine main peaks in the fingerprints were identified. The result of hierarchical cluster analysis showed that the samples from two species in five areas could be divided into two distinct groups (the same as the groups of the samples divided by their species) based on their compositional fingerprints. A rapid and convenient discriminant function was then established to discriminate the species of unknown Wen-Hou-Po, and the cross validation result was 100%. In this study, the methods established are reliable, and could be used to evaluate the quality and to identify the species of Wen-Hou-Po in the future.     

X-ray fluorescence analysis for the study of fragments pottery excavated at Tell Jendares site, Syria, employing multivariate statistical analysis

X-ray fluorescence analysis study of 44 archaeological pottery samples collected from Tell Jendares site north-west of Syria has been carried out. Four samples of the total previous investigated samples were obtained from the kiln found on Tell Jendares site. Seventeen different chemical elements were determined. The XRF results have been processed using two multivariate statistical cluster and factor analysis methods in order to determine the similarities and correlation between the selected samples based on their elemental composition. The methodology successfully separates the samples where three distinct chemical groups were discerned.     

Liquid chromatography-accurate radioisotope counting and microplate scintillation counter technologies in drug metabolism studies

The present study involves an analysis of the performance of liquid chromatography (LC)-accurate radioisotope counting (ARC) and microplate scintillation counter (TopCount) technologies in drug metabolism studies. For the purpose of evaluating these systems, biological samples resulting from the metabolism of a radiolabeled [14C] compound, known as compound B, are analyzed using LC-ARC and TopCount under similar high-performance LC conditions. Counting efficiency is 83% for LC-ARC, 77% for TopCount, and linearity is R2 of 0.9998 versus 0.9984, respectively. The limit of detection for LC-ARC is 12 disintegrations per minute (dpm) with 1-min/fraction counting, yet for TopCount it is 8.7 dpm with 5-min/fraction counting. Under optimal conditions for each, the total run time of LC-ARC is approximately half that of TopCount. These results indicate that there is no significant difference between these two systems in terms of efficiency, linearity, and limit of detection. However, the LC-ARC system does not involve any manual operations, yet TopCount requires manual sample transfer and data import. This study shows that impressive progress has been made in the technology of radioisotope counting in drug metabolism using LC-ARC. This system enhances the resolution of radiochromatograms and is able to measure volatile metabolites that TopCount cannot detect at all. The ability to acquire mass spectra online is also a major advancement. The overall results suggest that the combination of LC-ARC with radioactivity detection and mass spectrometry has great potential as a powerful tool for radioisotope measurement in metabolite identification studies during drug discovery and development.     

Determination of impurities in illicit methamphetamine seized in Korea and Japan

Impurities produced during synthesis of methamphetamine (MA) show different patterns under various synthetic conditions. Valuable information on the origins and smuggling routes can be obtained by using impurities as chemical fingerprints. We have detected more than 100 compounds from 436 MA samples seized in Korea by gas chromatography-flame ionization detector and gas chromatography-mass spectrometer, among which 31 impurities and three additives were identified. Twenty-six impurity peaks including unknowns were selected as the indicators of similarity, and were used as variables for cluster analysis. Cluster analysis result showed that part of the MA samples seized in Japan might have the same origin as those seized in Korea. It means that broad-based cooperation is necessary for efficient regulation of MA. Synthetic trends of the MA seizures of Korea were monitored by cluster analysis with 16 MA samples synthesized by three different methods in the previous work. We could find comparable changes of synthetic trends, which might have been influenced by domestic regulations and international situations.     

运用色谱指纹图谱与化学计量学方法对灵芝进行分类

采用95%乙醇为提取溶剂,运用高效液相色谱(HPLC)指纹图谱技术与化学计量学方法,对11个不同灵芝菌株子实体进行分类。通过相似度分析分别获得提取样品指纹图谱的13个共有峰及每个样品之间的相似度;以相对共有峰面积为分析参数,运用化学计量学方法包括聚类分析(HCA)、主成分分析(PCA)及判别分析(DA)对其进行分类,结果分为紫芝、赤芝和美国大灵芝3类。实验结果表明,用化学计量学的方法对灵芝样品的指纹图谱数据进行分析,是一种可用于其分类的科学方法。     

Methods of multivariate data analysis applied to the investigation of fen soils

Fen soils from two sites of the Rhin-Havel-Luch, a peatland in the north-east of Germany, have been investigated. The samples have been collected in two horizons, representing different degrees of degradation and mineralisation of peat. Gravimetric measurements, energy dispersive X-ray fluorescence (EDXRF), elemental analysis, and ¹H low resolution nuclear magnetic resonance (LR-NMR) of the fen soil samples have been performed. By multivariate analysis of all the experimental data, especially by the principal component analysis (PCA) and by the cluster analysis, respectively, it was possible to classify the fen soils, to identify their characteristic properties, to detect temporal and local variations, and to prove representative field sampling. Furthermore, the correlation between variables of the applied analytical methods could be interpreted in context to the composition of fen soils and mutual influences of their properties.     

Radioisotope-induced xrf analysis of tumor-frelated tissue samples

Healthy and tumor-bearing mice have been analyzed in a trace element time dependent study by employing two different radioisotope XRF systems. Results from these analytical systems, using a point and an annular sosurce, can be readily compared utilizing healthy tissue samples as the normalizing standard. Normalized elemental ratios generated with the two systems for similar tissue samples are in good agreement. The results reported use two of the points generated in the time study of the disease progresss, days zero and day 21.     

Development of a method for the separation of corrinoids in ovine tissues by HPLC

A method has been developed using a combination of high-performance liquid chromatography (HPLC) and a radioisotope dilution assay (RIDA) to routinely estimate the distribution of corrinoids (the cobalamins hydroxocobalamin, methylcobalamin and 5'-deoxyadenosylcobalamin, and cobalamin analogues) in liver, plasma, milk, intestinal fluid and faeces. Corrinoids were extracted with a sodium acetate buffer, separated by HPLC and quantified by RIDA. Recoveries of corrinoids were 29% for hydroxocobalamin, 50% for 5'-deoxyadenosylcobalamin and 64% for methylcobalamin. The method allows the routine analysis of many samples and maintains good standards of precision.     

Effect of nitrate on the determination of iron concentration in phytoplankton culture medium by liquid scintillation counting (LSC) method using 55Fe as radioisotope tracer

Liquid scintillation counting (LSC) method using a radioisotope tracer has several advantages such as simple procedure, high sensitivity and low detection limit, and has been used for the determination Fe concentrations in water samples. Several factors such as nitrate concentration, pH, chelating ligand affect the efficiency of this method in the determination of iron (Fe) in waters. In this study, the effect of nitrate in phytoplankton culture medium on the determination of Fe concentration by LSC method using ⁵⁵Fe radioisotope tracer was evaluated. The measured Fe concentrations in the medium were lower than its added concentration (1.5 μM) when liquid samples contain nitrate. Fe concentrations decreased exponentially as nitrate concentrations increased up to 2.64 mM, reaching a constant value of 1.31 μM Fe at nitrate concentrations higher than 2.64 mM. A correction factor (f = 1.14) was calculated from the decrease rate of Fe concentrations at different nitrate concentrations in the phytoplankton culture medium. This correction factor can be used to correct the measurement values of Fe concentrations in phytoplankton culture medium obtained from LSC method. Our results showed that up to 94 % of the added Fe can be determined by LSC using ⁵⁵Fe radioisotope tracer. The remaining 6 % was probably bound to the walls of the culturing vessel. This method is also applicable for the measurement of Fe size-fractionation in phytoplankton culture medium.     

A new concept of automated radiochemical analysis based on substoichiometric separation

Tracer methods, such as radioisotope dilution, radiometric analysis, concentration dependent distribution, saturation analysis etc., are compared on a basis of radioactivity-mass balance relationships, and their automation is proposed. The requirements of a chemical separation, which is an integral part of these methods, are discussed. It is shown that automation, in addition to its obvious advantages, enables entirely new procedures to be developed, based on chemical separations which do not give reproducible results when performed normally. Simple commercially available apparatus has been used to verify these concepts by determination of traces of mercury. As little as 0.005 ppm of Hg can be determined, the detection limit being about a tenth of this. In the range 2.4-0.03 ppm, 20 samples/hr can be analysed, for lower amounts the sampling rate is 10 samples/hr.     

A simple radioisotope X-ray fluorescence method for provenance studies of archaeological ceramics employing principal component analysis

A simple radioisotope X-ray fluorescence method of 1000 s irradiation of the samples by a ¹⁰⁹Cd source combined with principal component analysis is described for determining the relative mass fractions of trace elements in majolica ceramics for provenance classification. Six provenances from Europe using 29 samples as standards and 12 unknown samples were investigated and characterized using selected trace elements as the variables. The unknown samples were previously assigned, but not definitively, by stylistic analysis and/or thermoluminescence measurements to the provenances of Teruel (Spain) and Holland. Because of a moderate fluorescence time, only the four net peak intensities of Pb, Rb, Sr and Zr could be used as variables. We have also studied the effect of not including the Pb variable, since the clay matrixes could have been contaminated in the glazing process or when the Pb-Sn enamel was removed. It is shown in both cases that the results were more consistent with the stylistic analysis and thermoluminescence measurements when the Pb concentration variable was not considered. A comparison of principal component analysis employing the three elements was similar to plotting of the relative mass fractions on a triangle graph.     

Determination of cocaine contamination on banknotes using tandem mass spectrometry and pattern recognition

Tandem mass spectrometry is used to monitor the contamination of banknotes by cocaine. By introducing a series of banknotes into an instrument a distribution of contamination can be obtained. The distribution of samples arising from defendants where the banknotes have been in close proximity to cocaine should differ from the distribution from the general background population. Peak picking and integration is used to produce a series of intensity readings for a batch of banknotes. By visually inspecting these distribution, and applying a variety of chemometric methods (principal components analysis, cluster analysis and class modelling via Mahalanobis distance) it is possible to discriminate effectively between the two classes of distribution (7157 background notes and 4826 case notes alleged to be from drug dealers). By calculating the Mahalonobis distance over 100 bootstrap iterations, background samples were correctly classified 96.48% of the time, while case samples were correctly classified 89.37% of the time.     

THM PyGC–MS of wood fragment and vegetable fibre forensic samples

Wood fragments and vegetable fibres were investigated using thermally assisted hydrolysis and methylation with pyrolysis gas chromatography–mass spectrometry (THM PyGC–MS). Multiple ion chromatography was used to decrease the interference from cellulosic peaks, and to obtain greater resolution between the lignin peaks. Forty-four wood samples were analysed using THM PyGC–MS. The wood fragments were able to be differentiated into angiosperms (hardwoods) and gymnosperms (softwoods) using principle component analysis (PCA), hierarchical cluster analysis (HCA), and the ratio of syringyl to guaiacyl lignin fragments (S/G ratio). PCA and HCA also differentiated several Monterey pine samples from the rest of the gymnosperms, primarily by the presence of β-pinene, an extractive compound. Other gymnosperm species and the individual angiosperm species were unable to be differentiated. A pilot study investigating the use of THM PyGC–MS for the analysis of vegetable fibres in forensic science found that the fibre types tended to group into two clusters, with one containing cotton, hemp and linen; and the other consisting of hessian, sisal, jute and coir. The seagrass sample was able to be differentiated from both groups. These groups were well separated using PCA, HCA and by the ratio of cinnamyl phenolic derivatives to guaiacyl lignin derivatives (C/G ratio). Some grouping of each fibre type was evident within each cluster, however the separation between the clusters was insufficient to differentiate them using these statistical techniques. THM PyGC–MS of vegetable fibres showed some potential for future use in forensic science.     

Cluster cross sections from pickup measurements: are the established methods consistent?

Pickup of several molecules, H(2)O, HBr, and CH(3)OH, and Ar atoms on free Ar(N) clusters has been investigated in a molecular beam experiment. The pickup cross sections of the clusters with known mean sizes, ?≈ 150 and 260 were measured by two independent methods: (i) the cluster beam velocity decrease due to the momentum transfer of the picked up molecules to the clusters, and (ii) Poisson distribution of a selected cluster fragment ion as a function of the pickup pressure. In addition, the pickup cross sections were calculated using molecular dynamics and Monte Carlo simulations. The simulations support the results of the velocity measurements. On the other hand, the Poisson distributions yield significantly smaller cross sections, inconsistent with the known Ar(N) cluster sizes. These results are discussed in terms of: (i) an incomplete coagulation of guest molecules on the argon clusters when two or more molecules are picked up; and (ii) the fragmentation pattern of the embedded molecules and their clusters upon ionization on the Ar cluster. We conclude that the Poisson distribution method has to be cautiously examined, if conclusions should be drawn about the cluster cross section, or the mean cluster size ?, and the number of picked up molecules.     

Detection and quantitative estimation of metalloporphyrins in vivo

Spectrofluorometry, radioisotope (RI) labelling and high performance liquid chromatography (HPLC) can be used to estimate photosensitizer concentrations. The biodistribution of porphyrins and metalloporphyrins containing the bifunctional chelating agent diethylenetriamine pentaacetic acid (DTPA) was examined in tumour-bearing mice by nitrogen-pulsed laser spectrofluorometry (PLS) and RI labelling. The biodistribution of metalloporphyrin amino acid derivatives containing alkoxyl groups was also examined by PLS and HPLC analysis using an acetone powder extraction method. Spectrofluorometry is useful for estimating the biodistribution of porphyrins in tumour, lung, kidney and serum, but not in liver. However, spectrofluorometry cannot be used to evaluate the concentration of certain metalloporphyrins such as manganese complexes. The concentrations of porphyrins in liver measured by PLS and two other methods showed remarkable differences. RI labelling and HPLC analysis are obviously tedious methods. Therefore it seems practical to screen for a number of compounds using the spectrofluorometric method (PLS). Subsequently, the porphyrins which give good results with PLS should be measured using RI labelling and HPLC.     

XAS study on copper red in ancient glass beads from Thailand

Glass has been used in ornaments and decorations in Thailand for thousands of years, being discovered in several archeological sites and preserved in museums throughout the country. To date only a few of them have been examined by conventional methods for their compositions and colorations. In this work we report for the first time an advanced structural analysis of Thai ancient glass beads using synchrotron X-ray absorption spectroscopy (XAS) and energy-dispersive X-ray (EDX) spectrometry. Four samples of ancient glass beads were selected from four different archeological sites in three southern provinces (Ranong, Krabi and Pang-nga) of Thailand. Archaeological dating indicated that they were made more than 1,300 years ago. A historically known method for obtaining a red color is to add compounds containing transition elements such as gold, copper, and chromium. For our samples, EDX spectrometry data revealed existing fractions of iron, copper, zinc, and chromium in ascending order. Thus, copper was selectively studied by XAS as being potentially responsible for the red color in the glass beads. K-shell X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) of copper were recorded in fluorescence mode using an advanced 13-element germanium detector. Comparisons with XANES spectra of reference compounds identified two major forms of copper, monovalent copper and a metallic cluster, dispersed in the glass matrix. The cluster dimension was approximated on the basis of structural modeling and a theoretical XANES calculation. As a complement, EXAFS spectra were analyzed to determine the first-shell coordination around copper. XAS was proven to be an outstanding, advanced technique that can be applied to study nondestructively archaeological objects to understand their characteristics and how they were produced in ancient times.     

不同产地白芷药材高效液相色谱指纹图谱研究

本文采用高效液相色谱-二极管阵列检测器(HPLC-DAD)法建立中药白芷的指纹图谱.应用化学计量学中两种不同的模式识别方法(主成分分析法和系统聚类分析法)对实验数据进行处理,以找出来自三个不同产地30个中药白芷样品间的相似性及差异性.两种模式识别方法均能成功地按样品的来源将不同产地的样品正确分类.建立了不同产地中药白芷的识别方法,该方法能有效地控制中药白芷的质量,并能为其它中药产品的化学模式识别提供参考.     

Quality evaluation of traditional Chinese drug toad venom from different origins through a simultaneous determination of bufogenins and indole alkaloids by HPLC

A simple and efficient HPLC method has been developed to evaluate the quality of traditional Chinese medicine toad venoms. The major bioactive ingredients, including 10 bufogenins and 4 indole alkaloids in the drug, were separated and quantified on a phenyl-hexyl column with a UV detector. A total of 27 toad venom samples from two species, Bufo bufo gargarizans CANTOR and Bufo melanostictus SCHNEIDER, from the different drug production regions of China, were analyzed. The chromatograms showed significant differences with respect to the samples from different origins. These toad venom samples can be distinctly classified into 4 groups by cluster analysis using the contents of the 14 main constituents, including toad venom samples from B. bufo gargarizans from north China, median China and south China, and samples from B. melanostictus from south China. Toad venom samples from B. bufo gargarizans from median China were considered to be of the highest quality.