Dissolution-accompanied aggregation kinetics of silver nanoparticles

Bare silver nanoparticles with diameters of 82 ± 1.3 nm were synthesized by the reduction of the Ag(NH(3))(2)(+) complex with D-maltose, and their morphology, crystalline structure, UV-vis spectrum, and electrophoretic mobilities were determined. Dynamic light scattering was employed to assess early stage aggregation kinetics by measuring the change in the average hydrodynamic diameter of the nanoparticles with time over a range of electrolyte types (NaCl, NaNO(3), and CaCl(2)) and concentrations. From this the critical coagulation concentration values were identified as 30, 40, and 2 mM for NaNO(3), NaCl, and CaCl(2), respectively. Although the silver nanoparticles were observed to dissolve in all three electrolyte solutions, the aggregation results were still consistent with classical Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. The dissolution of the silver nanoparticles, which were coated with a layer of Ag(2)O, was highly dependent on the electrolyte type and concentration. In systems with Cl(-) a secondary precipitate, likely AgCl, also formed and produced a coating layer that incorporated the silver nanoparticles. Aggregation of the silver nanoparticles was also examined in the presence of Nordic aquatic fulvic acid and was little changed compared to that evaluated under identical fulvic acid-free conditions. These results provide a fundamental basis for further studies evaluating the environmental fate of silver nanoparticles in natural aquatic systems.     

Aggregation and deposition behavior of boron nanoparticles in porous media

New kinds of solid fuels and propellants comprised of nanomaterials are making their way into civilian and military applications yet the impact of their release on the environment remains largely unknown. One such material is nano boron, a promising solid fuel and propellant. The fate and transport of nano boron under various aquatic systems was investigated in aggregation and deposition experiments. Column experiments were performed to examine the effects of electrolyte concentration and flow velocity on the transport of boron nanoparticles under saturated conditions, whereas aggregation tests were conducted to assess the effects of electrolytes on the aggregation of the boron nanoparticles. Aggregation tests indicated the presence of different reaction-controlled and diffusion-controlled regimes and yielded critical coagulation concentrations (CCC) of 200 mM, 0.7 mM and 1.5 mM for NaCl, CaCl(2), and MgCl(2), respectively. Aggregation and deposition experimental data corresponded with the classic Derjaguin-Landau-Verwey-Overbeek (DLVO) model and the constant attachment efficiency filtration model, respectively. Theoretical calculations indicated that both the primary and secondary energy minima play important roles in the deposition of nano boron in sand columns.     

纳米银粒子对[Ru(bpy)_3]~(2+)光谱学性质的影响及电解质效应

研究了[Ru(bpy)3]2+溶液中引入纳米银粒子的光谱学性质变化规律以及[Ru(bpy)3]2+与纳米银粒子所构成的溶液体系([Ru(bpy)3]2+-Ag)的电解质效应.研究结果表明,[Ru(bpy)3]2+吸附在纳米银粒子表面使纳米银粒子相互桥连形成规则的类链状网络聚集体.纳米银粒子造成[Ru(bpy)3]2+溶液荧光猝灭,且大尺寸的纳米银粒子引起的荧光猝灭程度较大.在[Ru(bpy)3]2+-Ag体系中引入电解质造成纳米银粒子不同程度的聚集和生长.电解质对纳米银聚集影响为:CaCl2MgCl2Ca(NO3)2KClKNO3.随着[Ru(bpy)3]2+-Ag体系中引入电解质含量的增加,溶液的荧光强度先降低而后又逐渐增强,直至达到定值,表明一定量的电解质可产生荧光猝灭释放效应.电解质对荧光强度影响顺序为:Ca(NO3)2CaCl2MgCl2KClKNO3.采用透射电子显微镜、紫外-可见吸收分光光度计和荧光分光光度计等手段从分子间相互作用和能量传输等方面初步探讨了纳米银粒子对表面吸附[Ru(bpy)3]2+溶液光谱学性质的影响机制以及电解质效应.     

Aggregation and deposition kinetics of fullerene (C60) nanoparticles

The aggregation and deposition kinetics of fullerene C60 nanoparticles have been investigated over a wide range of monovalent and divalent electrolyte concentrations by employing time-resolved dynamic light scattering (DLS) and quartz crystal microbalance (QCM), respectively. Aggregation kinetics of the fullerene nanoparticles exhibited reaction-limited (slow) and diffusion-limited (fast) regimes in the presence of both electrolytes, having critical coagulation concentrations (CCC) of 120 and 4.8 mM for the monovalent (NaCl) and divalent (CaCl2) salts, respectively. The measured stability ratios of the aggregating fullerene nanoparticles were in very good agreement with Derjaguin-Landau-Verwey-Overbeek (DLVO) theory, with a derived Hamaker constant of 6.7 x 10-21 J for the fullerene nanoparticles in aqueous medium. For the deposition kinetics studies, the rate of fullerene nanoparticle deposition increased with increasing electrolyte concentrations, as was indicated in the aggregation kinetics results. However, at electrolyte concentrations approaching or exceeding the CCC, the rate of deposition dropped sharply due to significant concurrent aggregation of the fullerene nanoparticles. The deposition of the fullerene nanoparticles was further shown to be mostly irreversible, with immediate detachment of the nanoparticles observed only when exposed to a solution of high pH.     

Cytotoxicity induced by engineered silver nanocrystallites is dependent on surface coatings and cell types

Due to their unique antimicrobial properties silver nanocrystallites have garnered substantial attention and are used extensively for biomedical applications as an additive to wound dressings, surgical instruments and bone substitute materials. They are also released into unintended locations such as the environment or biosphere. Therefore it is imperative to understand the potential interactions, fate and transport of nanoparticles with environmental biotic systems. Numerous factors including the composition, size, shape, surface charge, and capping molecule of nanoparticles are known to influence cell cytotoxicity. Our results demonstrate that the physical/chemical properties of the silver nanoparticles including surface charge, differential binding and aggregation potential, which are influenced by the surface coatings, are a major determining factor in eliciting cytotoxicity and in dictating potential cellular interactions. In the present investigation, silver nanocrystallites with nearly uniform size and shape distribution but with different surface coatings, imparting overall high negativity to high positivity, were synthesized. These nanoparticles included poly(diallyldimethylammonium) chloride-Ag, biogenic-Ag, colloidal-Ag (uncoated), and oleate-Ag with zeta potentials +45 ± 5, -12 ± 2, -42 ± 5, and -45 ± 5 mV, respectively; the particles were purified and thoroughly characterized so as to avoid false cytotoxicity interpretations. A systematic investigation on the cytotoxic effects, cellular response, and membrane damage caused by these four different silver nanoparticles was carried out using multiple toxicity measurements on mouse macrophage (RAW-264.7) and lung epithelial (C-10) cell lines. Our results clearly indicate that the cytotoxicity was dependent on various factors such as surface charge and coating materials used in the synthesis, particle aggregation, and the cell-type for the different silver nanoparticles that were investigated. Poly(diallyldimethylammonium)-coated Ag nanoparticles were found to be the most toxic, followed by biogenic-Ag and oleate-Ag nanoparticles, whereas uncoated or colloidal silver nanoparticles were found to be the least toxic to both macrophage and lung epithelial cells. Also, based on our cytotoxicity interpretations, lung epithelial cells were found to be more resistant to the silver nanoparticles than the macrophage cells, regardless of the surface coating.     

Studying the size/shape separation and optical properties of silver nanoparticles by capillary electrophoresis

This paper describes the feasibility of employing capillary electrophoresis (CE) to separate silver particles in nanometer regimes. We have found that the addition of an anionic surfactant, sodium dodecyl sulphate (SDS), to the running electrolyte prevents coalescence of the silver particles during the process, which improves the separation performance; the concentration of SDS required for optimal silver nanoparticle separation is ca. 20 mM. By monitoring the electropherograms using a diode-array detection (DAD) system, we have also investigated the separation of suspended silver nanorods with respect to their shapes. Our results demonstrate that the combination of CE and DAD is a powerful one for the separation and characterization of various silver nanoparticles.     

Influence of humic acid on the aggregation kinetics of fullerene (C60) nanoparticles in monovalent and divalent electrolyte solutions

The early stage aggregation kinetics of fullerene C60 nanoparticles were investigated in the presence of Suwannee River humic acid and common monovalent and divalent electrolytes through time-resolved dynamic light scattering (DLS). In the absence of humic acid, the aggregation behavior of the fullerene nanoparticles in the presence of NaCl, MgCl2, and CaCl2 was found to be consistent with the classic Derjaguin-Landau-Verwey-Overbeek (DLVO) theory of colloidal stability. In the presence of humic acid and NaCl or MgCl2 electrolytes, the adsorbed humic acid on the fullerene nanoparticles led to steric repulsion, which effectively stabilized the nanoparticle suspension. This behavior manifested in a dramatic drop in the rate of aggregation, an increase in the critical coagulation concentration (CCC), and an attained value of less than unity for the inverse stability ratio (or attachment efficiency) at high MgCl2 concentrations. While the increase in the nanoparticle stability was similarly observed in the presence of humic acid at low CaCl2 concentrations, enhanced aggregation occurred at higher CaCl2 concentrations. Measurement of scattered light intensities over time indicated significant aggregation of the humic acid macromolecules in solutions of high CaCl2 concentrations. Transmission electron microscopy (TEM) imaging of the fullerene aggregate structures in the presence of humic acid revealed that bridging of the fullerene nanoparticles and aggregates by the humic acid aggregates is the likely mechanism for the enhanced aggregation at high CaCl2 concentrations.     

基础实验:金纳米粒子的制备及其光学性质

围绕金纳米粒子前沿内容,设计了一个简易的本科生基础实验,利用柠檬酸钠还原氯金酸法制备分散性好的金纳米粒子溶液,讨论了其尺寸与颜色的关系,探究了不同电解质和非电解质对金纳米粒子团聚及其颜色的影响,初步了解金纳米粒子的光学特性和探针效应基本原理。     

Interactions between chitosan and SDS at a low-charged silica substrate compared to interactions in the bulk--the effect of ionic strength

The effect of ionic strength on association between the cationic polysaccharide chitosan and the anionic surfactant sodium dodecyl sulfate, SDS, has been studied in bulk solution and at the solid/liquid interface. Bulk association was probed by turbidity, electrophoretic mobility, and surface tension measurements. The critical aggregation concentration, cac, and the saturation binding of surfactants were estimated from surface tension data. The number of associated SDS molecules per chitosan segment exceeded one at both salt concentrations. As a result, a net charge reversal of the polymer-surfactant complexes was observed, between 1.0 and 1.5 mM SDS, independent of ionic strength. Phase separation occurs in the SDS concentration region where low charge density complexes form, whereas at high surfactant concentrations (up to several multiples of cmc SDS) soluble aggregates are formed. Ellipsometry and QCM-D were employed to follow adsorption of chitosan onto low-charged silica substrates, and the interactions between SDS and preadsorbed chitosan layers. A thin (0.5 nm) and rigid chitosan layer was formed when adsorbed from a 0.1 mM NaNO3 solution, whereas thicker (2 nm) chitosan layers with higher dissipation/unit mass were formed from solutions at and above 30 mM NaNO3. The fraction of solvent in the chitosan layers was high independent of the layer thickness and rigidity and ionic strength. In 30 mM NaNO3 solution, addition of SDS induced a collapse at low concentrations, while at higher SDS concentrations the viscoelastic character of the layer was recovered. Maximum adsorbed mass (chitosan + SDS) was reached at 0.8 times the cmc of SDS, after which surfactant-induced polymer desorption occurred. In 0.1 mM NaNO3, the initial collapse was negligible and further addition of surfactant lead to the formation of a nonrigid, viscoelastic polymer layer until desorption began above a surfactant concentration of 0.4 times the cmc of SDS.     

Hydroxyapatite nanoparticle prepared by controlled precipitation from aqueous phase

Hydroxyapatite nanoparticles (NPs) were prepared by controlled precipitation in the presence of stabilizers that confined growth and inhibited the aggregation of nanoparticles. Electrostatically stabilized NPs were prepared in the presence of sodium citrate; Tween 80 was used for steric stabilization. At low stabilizer concentrations, nanorods were formed of grown together, spheroidal hydroxyapatite NPs of ~20 nm in diameter. The rod length decreased as ether sodium citrate or Tween 80 concentration increased. When Cit^3–/Ca²⁺ = 3mol/mol, platelike NPs were formed 20–45 nm long and ~10 nm wide; for Cit^3–/Ca²⁺ = 4 mol/mol, NPs had sizes of 10–15 nm. At relatively high Tween 80 concentrations (>0.05 mol/L), foamlike structures were obtained.     

Polyvinylpyrrolidone as an Efficient Stabilizer for Silver Nanoparticles

Aggregation of nanoparticles is a serious problem in their applications. In this article, stability of biosynthesized silver nanoparticles (AgNPs) was initially studied with different concentrations of sodium chloride (NaCl). Surfactant screening showed that polyvinylpyrrolidone (PVP) was an ideal stabilizer, which not only was effective at a low concentration (0.1%, V/V), but also could protect silver colloids from aggregation for a long period at 1 mol·L^?1 NaCl, and 6 h even at 3 mol·L^?1 NaCl. However, some other surfactants, such as sodium dodecyl (SDS), Triton X‐100, Tween‐20, and Tween‐80, could not prevent AgNPs from aggregation even at a high concentration up to 0.5% (V/V). This AgNPs stabilizer is simple and convenient for a variety of applications compared with others.     

The Influence of the Capping Agent on the Oxidation of Silver Nanoparticles: Nano‐impacts versus Stripping Voltammetry

The influence of capping agents on the oxidation of silver nanoparticles was studied by using the electrochemical techniques of anodic stripping voltammetry and anodic particle coulometry (“nano‐impacts”). Five spherical silver nanoparticles each with a different capping agent (branched polyethylenimine (BPEI), citrate, lipoic acid, polyethylene glycol (PEG) and polyvinylpyrrolidone (PVP)) were used to perform comparative experiments. In all cases, regardless of the capping agent, complete oxidation of the single nanoparticles was seen in anodic particle coulometry. The successful quantitative detection of the silver nanoparticle size displays the potential application of anodic particle coulometry for nanoparticle characterisation. In contrast, for anodic stripping voltammetry using nanoparticles drop casting, it was observed that the capping agent has a very significant effect on the extent of silver oxidation. All five samples gave a low oxidative charge corresponding to partial oxidation. It is concluded that the use of anodic stripping voltammetry to quantify nanoparticles is unreliable, and this is attributed to nanoparticle aggregation.     

Role of stabilizing agents in the formation of stable silver nanoparticles in aqueous solution: Characterization and stability study

The stability of silver nanoparticles is controlled mainly by two major factors, namely, aggregation and oxidation. In the present study, silver nanoparticles were synthesized by using different series of reducing agents like a strong reducing agent (sodium borohydride), a mild reducing agent (tri-sodium citrate), and a weak reducing agent (glucose) with different capping agents, namely, polyvinyl pyrrolidone (PVP K 30), starch, and sodium carboxyl methyl cellulose (NaCMC). The synthesized silver nanoparticles were characterized by UV-Visible absorption spectroscopy, dynamic light scattering (DLS), atomic force microscopy (AFM), and anti-microbial activity. The particle size of silver nanoparticles varies in the following order: sodium borohydride < tri-sodium citrate < glucose. Combination of sodium borohydride–polyvinyl pyrrolidone and tri-sodium citrate-polyvinyl pyrrolidone yields stable silver nanoparticles compared to other combinations of reducing agents and capping agents. The stability results confirmed that a refrigerated condition (8°C) was more suitable for storage of silver nanoparticles. Anti-microbial activity of silver nanoparticles synthesized in a sodium borohydride–polyvinyl pyrrolidone mixture shows a larger zone of inhibition compared to other silver nanoparticles. Anti-microbial results confirmed that the anti-microbial activity is better with smaller particle size. The size and stability of silver nanoparticles in the presence of different combinations of stabilizing and capping agents are reported.     

电化学沉积含纳米银羟基磷灰石涂层及抗菌性能研究

应用柠檬酸钠还原法制得纳米银胶体溶液,并在钛基表面电泳沉积纳米银颗粒,再由电化学沉积法沉积羟基磷灰石涂层.X射线电子能谱(XPS)、X射线衍射(XRD)和高分辨透射电子显微镜(HRTEM/SEM)证实该涂层含羟基磷灰石(HAp)和Ag,其纳米银颗粒尺度为5~20 nm.抗菌试验表明,涂层中含银量随电泳沉积液纳米银粒子浓度升高而增加,抗菌性也相应增强.但如沉积液中银粒子超过一定浓度时,则其在钛表面会发生明显团聚,导致抗菌性能的降低.据此,初步优化了抗菌效果最佳的复合涂层制备技术.     

Molecularly imprinted CEC sorbents: investigations into polymer preparation and electrolyte composition

The influence of the sorbent preparation protocol and separation parameters on the selectivity and chromatographic efficiency of super-porous molecularly imprinted polymer (MIP) monoliths in capillary electrochromatography (CEC) was studied. Chiral templates were employed and enantiomer separation and resolution were used as measures of imprint selectivity and column efficiency, respectively; the latter was in addition studied by chromatography of non-related aromatic structures. The polymer preparation was varied with respect to monomer composition in the pre-polymerisation mixture and also the use of single versus multiple template(s). The separation parameters investigated were type and content of organic solvent and surfactant modifier in the electrolyte. It was found that acetone and acetonitrile in buffer mixtures provided enantiomer separation of enantiomers of the template and also structural analogues; however, the degree of separation was greatly influenced by the content in the electrolyte. Three surfactants, sodium dodecylsulfate (SDS), cetyltrimethylammonium bromide (CTAB) and polyoxyethylene sorbitanmonolaurate (Tween 20), were examined as electrolyte modifiers. It was found that addition of SDS decreased and CTAB and Tween 20 increased the enantiomer separation. SDS and CTAB could be used up to 1 mM concentration whereas Tween could be used up to 90 mM concentration without causing baseline disturbances. The effects found and demonstrated strongly suggest that these parameters are to be considered during optimisation of an MIP-CEC system.     

Mucin-electrolyte interactions at the solid-liquid interface probed by QCM-D

The interaction between mucin and ions has been investigated by employing the quartz crystal microbalance technique with measurement of energy dissipation. The study was partially aimed at understanding the adsorption of mucin on surfaces with different chemistry, and for this purpose, surfaces exposing COOH, OH, and CH(3) groups were prepared. Mucin adsorbed to all three types of functionalized gold surfaces. Adsorption to the hydrophobic surface and to the charged hydrophilic surface (COOH) occured with high affinity despite the fact that in the latter case both mucin and the surface were negatively charged. On the uncharged hydrophilic surface exposing OH groups, the adsorption of mucin was very low. Another aim was to elucidate conformational changes induced by electrolytes on mucin layers adsorbed on hydrophobic surfaces from 30 mM NaNO(3). To this end, we investigated the effect of three electrolytes with increasing cation valance: NaCl, CaCl(2) and LaCl(3). At low NaCl concentrations, the preadsorbed layer expands, whereas at higher concentrations of NaCl the layer becomes more compact. This swelling/compacting of the mucin layer is fully reversible for NaCl. When the mucin layer instead is exposed to CaCl(2) or LaCl(3), compaction is observed at 1 mM. For CaCl(2), this process is only partially reversible, and for LaCl(3), the changes are irreversible within the time frame of the experiment. Finally, mucin interaction with the DTAB cationic surfactant in an aqueous solution of different electrolytes was evaluated with turbidimetry measurements. It is concluded that the electrolytes used in this work screen the association between mucin and DTAB and that the effect increases with increasing cation valency.     

A facile route to synthesize silver nanoparticles in polyelectrolyte capsules

We are reporting a novel green approach to incorporate silver nanoparticles (NPs) selectively in the polyelectrolyte capsule shell for remote opening of polyelectrolyte capsules. This approach involves in situ reduction of silver nitrate to silver NPs using PEG as a reducing agent (polyol reduction method). These nanostructured capsules were prepared via layer by layer (LbL) assembly of poly(allylamine hydrochloride) (PAH) and dextran sulfate (DS) on silica template followed by the synthesis of silver NPs and subsequently the dissolution of the silica core. The size of silver nanoparticles synthesized was 60±20 nm which increased to 100±20 nm when the concentration of AgNO(3) increased from 25 mM to 50 mM. The incorporated silver NPs induced rupture and deformation of the capsules under laser irradiation. This method has advantages over other conventional methods involving chemical agents that are associated with cytotoxicity in biological applications such as drug delivery and catalysis.     

Kinetic determination of critical coagulation concentrations for sodium- and calcium-montmorillonite colloids in NaCl and CaCl2 aqueous solutions

The stability of the sodium and calcium forms of montmorillonite was studied at different NaCl and CaCl2 concentrations. The aggregation kinetics was determined from the decrease in particle concentration with time at different electrolyte concentrations. The DLVO theory defines the critical coagulation concentration (CCC) value as the electrolyte concentration that balances the attractive and repulsive potential energies between the particles, making aggregation diffusion-controlled. Therefore CCC values were obtained by extrapolation of the aggregation rate constants measured as a function of ionic strength to conditions where the rate constant value is determined by diffusion only. When the electrolyte was CaCl2, the CCC value was found to be approximately two orders of magnitude lower than the CCC values obtained using NaCl as electrolyte.     

New carrier electrolytes for the separation of chlorophenols by capillary electrophoresis

Optimum conditions for the separation of positional isomers of chlorophenols by capillary zone electrophoresis (CZE) were established. The behavior of five volatile electrolytes (L-cysteic acid, 3-amino-1-propanesulfonic acid, aminomethanesulfonic acid, diethylmalonic acid, and ammonium acetate) was compared. The best performance based on low electrophoretic current and high separation efficiency was obtained for diethylmalonic acid as working electrolyte. The influence of pH on the separation, using both uncoated fused-silica capillaries and modified capillaries (NaAMPS from EKT) with anionic coating, was discussed. Moreover, the effect of electrolyte concentration and applied voltage using fused-silica capillaries was studied. The optimum CZE conditions that allowed the separation of 16 chlorophenols were 20 kV, 30 mM diethylmaIonic acid, pH 7.25, and uncoated fused-silica capillary. Figures of merit such as run-to-run and day-to-day precision, linearity, and limits of detection were calculated.     

Theoretical consideration on preparing silver particle films by adsorbing nanoparticles from bulk colloids to an air-water interface

In our previous paper, a method for preparing enormous surface-enhanced Raman scattering (SERS) active substrates through the aggregation of silver particles trapped at an air-water interface was reported. Here, further efforts were devoted to investigate the origin of assembling silver particle films by adsorbing nanoparticles from bulk colloids to the air-water interface. It was revealed that it is thermodynamically favorable for a colloidal particle in bulk colloids to adsorb to the air-water interface; however, a finite sorption barrier between it and the nearby particles usually restrains the adsorption process. When an electrolyte such as KCl, which is commonly used as an activating agent for additional SERS enhancement, was added into silver colloids, it largely reduced the sorption barrier. Thus, silver nanoparticles can break through the sorption barrier, pop up, and be trapped at the air-water interface. The trapped silver particles are more inclined to aggregate at the interface than those in bulk colloids due to the increase of van der Waals forces and the reduction of electrostatic forces. The morphology of the as-prepared silver particle films was characterized by scanning electron microscope, and their SERS activity was tested using NaSCN as a probe molecule. The surface enhancement of the silver particle films is about 1-2 orders of magnitude higher compared with that of silver colloids, because most of the silver particles in the films are in the aggregation form that provides enormous SERS enhancement. Furthermore, the stability of such type of films is much better that of colloid solutions.