The effect of double-chain surfactants on armored bubbles: a surfactant-controlled route to colloidosomes

We find that the gas phases of air bubbles covered with anionic or cationic polystyrene latex particles dissolve on exposure to cationic and catanionic surfactants. The particles on the bubble interface are released as singlets or aggregates when the surfactant has a single hydrophobic chain, while porous colloidal capsules (colloidosomes) with the same aqueous phase inside as out are obtained when the surfactant has two hydrophobic chains. The formation of colloidosomes from the particle-covered bubbles does not appear to depend significantly on the charge of the particles, which makes it unlikely that bilayers of surfactant are stabilizing the colloidosome. While the exact mechanism of formation remains an open question, our method is a simple one-step process for obtaining colloidosomes from particle-covered bubbles.     

A novel method of fabrication of latex-stabilized water-core colloidosomes at room temperature

Colloidosomes have attracted great interest in recent years because of the capability of storage and delivery of useful materials in various fields. In this article, a novel technique for formation of colloidosomes at room temperature suitable for encapsulation of biomaterials was examined. We demonstrate the formation of colloidosomes of 18.0 μm in size at room temperature by adding a small amount of ethanol into the continuous phase of sunflower oil. Poly(methyl methacrylate-co-butyl acrylate) latex particles of 185 nm in size, used in this study, were found to aggregate when ethanol was added to their suspension. We suggest that the shell of the water-core emulsions was locked by the aggregation of latex particles due to the diffusion of ethanol into the aqueous latex suspension.     

Responsive core-shell latex particles as colloidosome microcapsule membranes

Responsive core-shell latex particles are used to prepare colloidosome microcapsules using thermal annealing and internal cross linking of the shell, allowing the production of the microcapsules at high concentrations. The core-shell particles are composed of a polystyrene core and a shell of poly[2-(dimethylamino)ethyl methacrylate]-b-poly[methyl methacrylate] (PDMA-b-PMMA) chains adsorbed onto the core surface, providing steric stabilization. The PDMA component of the adsorbed polymer shell confers thermally responsive and pH-responsive characteristics to the latex particle, and it also provides glass transitions at temperatures lower than those of the core and reactive amine groups. These features facilitate the formation of stable Pickering emulsion droplets and the immobilization of the latex particle monolayer on these droplets to form colloidosome microcapsules. The immobilization is achieved through thermal annealing or cross linking of the shell under mild conditions feasible for large-scale economic production. We demonstrate here that it is possible to anneal the particle monolayer on the emulsion drop surface at 75-86 °C by using the lower glass-transition temperature of the shell compared to that of the polystyrene cores (～108 °C). The colloidosome microcapsules that are formed have a rigid membrane basically composed of a densely packed monolayer of particles. Chemical cross linking has also been successfully achieved by confining a cross linker within the disperse droplet. This approach leads to the formation of single-layered stimulus-responsive soft colloidosome membranes and provides the advantage of working at very high emulsion concentrations because interdroplet cross linking is thus avoided. The porosity and mechanical strength of the microcapsules are also discussed here in terms of the observed structure of the latex particle monolayers forming the capsule membrane.     

Fabrication of colloidosomes at low temperature for the encapsulation of thermally sensitive compounds

A method using safe and mild conditions to prepare water-core colloidosomes of a few micrometers in size is examined. Using poly(styrene-co-butylacrylate) colloidal particles of 180 nm in size, with a low-temperature glass transition of 30 or 42 degrees C, the self-assembly into micrometer-sized water-core polymer shell particles is demonstrated. The effect of oil phase type, surfactant and cosolvent, sintering time, and the method of transfer into an aqueous phase are all examined. The work demonstrates the production of water-core rigid-shell colloidosomes at low temperatures, between 35 and 65 degrees C.     

Polyamine-functional sterically stabilized latexes for covalently cross-linkable colloidosomes

Sterically stabilized polystyrene latexes were prepared by aqueous emulsion polymerization using a poly(ethylene imine) (PEI) stabilizer in the presence of 4-vinylbenzyl chloride (4-VBC; 1.0 wt % based on styrene). Partial quaternization of the amine groups on the PEI chains by 4-VBC occurs in situ, hence producing a chemically grafted steric stabilizer. Such 4-VBC-modified PEI chains were grafted more efficiently onto the polystyrene particles than unmodified PEI, as judged by aqueous electrophoresis, XPS, and nitrogen microanalysis. Moreover, partially quaternized PEI gave significantly smaller polystyrene particles than those synthesized in the absence of any PEI stabilizer or those synthesized using unmodified PEI. The partially quaternized PEI-stabilized polystyrene latex proved to be an effective emulsifier at pH 9, forming stable oil-in-water Pickering emulsions when homogenized (12,000 rpm, 2 min, 20 °C) with four model oils, namely, n-dodecane, methyl myristate, isononyl isononanoate, and sunflower oil. The primary and/or secondary amine groups on the PEI stabilizer chains were successfully cross-linked using three commercially available polymeric reagents, namely, tolylene 2,4-diisocyanate-terminated poly(propylene glycol) (PPG-TDI), poly(propylene glycol) diglycidyl ether (PPG-DGE), or poly(ethylene glycol) diglycidyl ether (PEG-DGE). Cross-linking with the former reagent led to robust colloidosomes that survived the removal of the internal oil phase on washing with excess alcohol, as judged by optical microscopy and SEM. PPG-TDI reacted very rapidly with the PEI stabilizer chains, with cross-linking being achieved during homogenization. Well-defined colloidosomes could be formed only by using sunflower oil and isononyl isononanoate with this cross-linker at 20 °C. However, cooling to 0 °C allowed colloidosomes to be formed using n-dodecane, presumably because of the slower rate of cross-linking at this reduced temperature. PPG-DGE proved to be a more generic cross-linker because it formed robust colloidosomes with all four model oils. However, cross-linking was much slower than that achieved using PPG-TDI, with intact colloidosomes being formed only after ～12 h at 20 °C. The PEG-DGE cross-linker allowed cross-linking to be conducted at 20 °C from the aqueous phase (rather from within the oil droplets for the oil-soluble PPG-TDI or PPG-DGE cross-linkers). In this case, well-defined colloidosomes were obtained at 50 vol % with surprisingly little intercolloidosome aggregation, as judged by laser diffraction studies.     

Plasmonic Colloidosomes as Three‐Dimensional SERS Platforms with Enhanced Surface Area for Multiphase Sub‐Microliter Toxin Sensing

Colloidosomes are robust microcapsules attractive for molecular sensing because of their characteristic micron size, large specific surface area, and dual‐phase stability. However, current colloidosome sensors are limited to qualitative fluorogenic receptor‐based detection, which restrict their applicability to a narrow range of molecules. Here, we introduce plasmonic colloidosome constructed from Ag nanocubes as an emulsion‐based 3D SERS platform. The colloidosomes exhibit excellent mechanical robustness, flexible size tunability, versatility to merge, and ultrasensitivity in SERS quantitation of food/industrial toxins down to sub‐femtomole levels. Using just 0.5 μL of sample volumes, our plasmonic colloidosomes exhibit >3000‐fold higher SERS sensitivity over conventional suspension platform. Notably, we demonstrate the first high‐throughput multiplex molecular sensing across multiple liquid phases.     

Colloidosomes from the controlled interaction of submicrometer triglyceride droplets and hydrophilic silica nanoparticles

The self-assembly of hydrophilic silica nanoparticles at the surface of charged submicrometer triglyceride droplets has been investigated with the aim to optimize the preparation of stable colloidosomes. The droplet charge, oil phase volume fraction, droplet/nanoparticle ratio, and salt concentration play important roles in controlling nanoparticle interactions and are reflected in the colloidosome zeta potential, size, stability, and interfacial structure (visualized by freeze-fracture SEM). Silica nanoparticle interactions with negatively charged droplets are weak, and partially covered droplets are identified. Positively charged droplets are strongly coated by silica nanoparticles and undergo charge reversal at specific droplet to nanoparticle ratios and electrolyte concentrations. Droplets at volume fractions (varphi) <10 (-4) undergo time-dependent limited coalescence until nanoparticle coverage is complete. For varphi in the range 10 (-4) to 2.5 x 10 (-4) and at certain critical droplet to nanoparticle ratios, droplets undergo neutralization or charge reversal coupled with aggregation and precipitation; this occurs in a time-independent manner. Specific conditions have been identified where stable 1-3 mum colloidosomes can be phase separated from heterocoagulates of droplets and nanoparticles.     

Cagelike polymer microspheres with hollow core/porous shell structures

Submicron‐scaled cagelike polymer microspheres with hollow core/porous shell were synthesized by self‐assembling of sulfonated polystyrene (PS) latex particles at monomer droplets interface. The swelling of the PS latex particles by the oil phase provided a driving force to develop the hollow core. The latex particles also served as porogen that would disengage automatically during polymerization. Influential factors that control the morphology of the microspheres, including the reserving time of emulsions, polymerization rate, and the Hildebrand solubility parameter and polarity of the oil phase, were studied. A variety of monomers were polymerized into microspheres with hollow core/porous shell structure and microspheres with different diameters and pore sizes were obtained. The polymer microspheres were characterized by scanning electron microscopy, transmission electron microscopy, optical microscopy, and Fourier transform infrared spectroscopy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 933–941, 2007     

Fabrication of "hairy" colloidosomes with shells of polymeric microrods

Novel colloidosome microcapsules with aqueous gel cores and integral shells of rodlike polymeric particles have been prepared and characterized. The synthesis is based on templating water-in-oil emulsions stabilized by rodlike particles followed by gelling of the aqueous phase, dissolution of the oil phase in ethanol, and redispersion of the obtained colloidosome capsules in water. Such capsules may find applications as vehicles for delivery and controlled release of drugs, cosmetics, and food supplements.     

Electrostatic Assembly/Disassembly of Nanoscaled Colloidosomes for Light‐Triggered Cargo Release

Colloidosome capsules possess the potential for the encapsulation and release of molecular and macromolecular cargos. However, the stabilization of the colloidosome shell usually requires an additional covalent crosslinking which irreversibly seals the capsules, and greatly limits their applications in large‐cargos release. Herein we report nanoscaled colloidosomes designed by the electrostatic assembly of organosilica nanoparticles (NPs) with oppositely charged surfaces (rather than covalent bonds), arising from different contents of a bridged nitrophenylene‐alkoxysilane [NB; 3‐nitro‐N‐(3‐(triethoxysilyl)propyl)‐4‐(((3‐(triethoxysilyl)propyl)‐amino)methyl)benzamid] derivative in the silica. The surface charge of the positively charged NPs was reversed by light irradiation because of a photoreaction in the NB moieties, which impacted the electrostatic interactions between NPs and disassembled the colloidosome nanosystems. This design was successfully applied for the encapsulation and light‐triggered release of cargos.     

All‐Silica Submicrometer Colloidosomes for Cargo Protection and Tunable Release

Colloidosomes have received considerable attention for the controlled delivery of active ingredients in medicine, agrochemicals, and cosmetics. However, most reported colloidosomes are highly permeable and size is larger than 1 μm. All silica colloidosomes have now been prepared with adjustable size, compact shell and low permeability. Our approach is based on the formation of inverse water‐in‐oil (w/o) emulsions stabilized solely by hydrophobic silica nanoparticles and subsequent locking of the particle at the oil–water interface by a simple sol–gel reaction of silica precursor at room temperature. The colloidosomes obtained display a robust and closed shell, ensuring a long‐term retention of small hydrophilic molecules such as Methylene Blue. Remarkably, unlike all other reported silica colloidosomes, a timely and stepwise release of the encapsulated cargo can be triggered by adding ethanol or surfactant without destroying the capsule shell.     

Cross-linked, heterogeneous colloidosomes exhibit pH-induced morphogenesis

Inspired by morphogenesis in biology, we present a strategy for developing functional 3D materials with the capacity to morph based on environmental cues. We utilized local mechanical stresses to cause global shape changes in colloidosomes. Colloidosomes were assembled from pH-sensitive calcium alginate particles (CAPs) with high and low swelling ratios. Colloidosomes were subsequently cross-linked via diamine compounds with varying carbon chain lengths. New colloidosome isoforms were generated from heterogeneous mixtures of CAPs, which resulted in nonuniform stresses. Our study demonstrated that coordinated networks of heterogeneous subunits may be used to design programmable materials.     

Preparation of pickering-emulsion-based capsules with shells composed of titanium dioxide nanoparticles and polyelectrolyte layers

A procedure has been proposed for the preparation of capsules with shells composed of titanium dioxide nanoparticles and polymers via the formation of Pickering emulsions (colloidosomes) followed by layer-by-layer deposition of polyelectrolytes. The feasibility of stabilizing oil droplets of emulsions by spontaneous adsorption of partly hydrophobized nanoparticles of anatase-form titanium dioxide at the oil/water interface has been studied. Conditions have been determined for the formation of stable colloidosomes and the subsequent layer-by-layer deposition of oppositely charged polyelectrolytes onto their surfaces. It has been shown that hydrophobic dyes may be encapsulated using the procedure developed for the preparation of the capsules. The photocatalytic activity of TiO₂ particles occurring in the shell has been demonstrated by the example of degradation of Nile red which is incorporated in the oil core of a capsule.     

Impact modification of thermoplastics by methyl methacrylate and styrene-grafted natural rubber latexes

The preparation and characterization of polymer blends with structured natural rubber (NR)-based latex particles are presented. By a semicontinuous emulsion polymerization process, a natural rubber latex (prevulcanized or not) was coated with a shell of crosslinked polymethylmethacrylate (PMMA) or polystyrene (PS). Furthermore, core–shell latexes based on a natural rubber/crosslinked PS latex semi-interpenetrating network were synthesized in a batch process. These structured particles were incorporated as impact modifiers into a brittle polymer matrix using a Werner & Pfleiderer twin screw extruder. The mechanical properties of PS and PMMA blends with a series of the prepared latexes were investigated. In the case of PMMA blends, relatively simple core (NR)–shell (crosslinked PMMA) particles improved the mechanical properties of PMMA most effectively. An intermediate PS layer between the core and the shell or a natural rubber core with PS subinclusions allowed the E-modulus to be adjusted. The situation was different with the PS blends. Only core–shell particles based on NR-crosslinked PS latex semi-interpenetrating networks could effectively toughen PS. It appears that microdomains in the rubber phase allowed a modification of the crazing behavior. These inclusions were observed inside the NR particles by transmission electron microscopy. Transmission electron photomicrographs of PS and PMMA blends also revealed intact and well-dispersed particles. Scanning electron microscopy of fracture surfaces allowed us to distinguish PS blends reinforced with latex semi-interpenetrating network-based particles from blends with all other types of particles.     

Designs of latex particles' morphologies for toughening polymer matrices

The performance of the designed structured core/shell latex particles in toughening polycarbonate (PC) matrix was examined. The influence of parameters related to the core/shell latex particles on toughening PC such as: the particle size and levels of crosslinking of the core rubber particles, composition and molecular-weight of the shell polymer, the weight ratio of shell and core polymers as well as the particle morphology was evaluated. Core/shell structured latex particles with thinner shells of higher molecular-weight polymers were found to improve the impact resistance of PC. The role of chain entanglements in increased adhesion between the discrete rubbery phase and the continuous glass matrix are discussed.     

Temperature-responsive semipermeable capsules composed of colloidal microgel spheres

We present semipermeable, hollow capsules (colloidosomes) that expand and contract upon heating and cooling. The capsules are composed of micrometer-sized poly(N-isopropylacrylamide)-co-acrylic acid microgel particles, which exhibit a reversible size transition near 34 degrees C. The microgel particles assemble on the surfaces of water droplets in oil. Addition of the diblock copolymer poly(butadiene-b-N-methyl 4-vinyl pyridinium iodide) to the oil results in soft, elastic membranes of microgel particles that remain intact after the droplet interfaces are dissolved. Under heating, the capsules contract reversibly by 13% or irreversibly by 40% in radius. These stimulus-responsive colloidosomes might be useful for controlled release or as microscopic actuators.     

Prevulcanisation of skim latex: morphology and its use in natural rubber based composite material

The prevulcanisation of skim latex, a by-product of field natural rubber (NR) latex concentrated by centrifugation, using sulphur and peroxide systems was investigated. Compared to the peroxide prevulcanisation, the lower swelling ratio of film casted from sulphur-prevulcanised skim (SPVS) latex was observed. The latter was then employed for preparation of NR/SPVS core–shell particles by using heterocoagulation technique whose driving force was an interpolymer complex between poly(ethylene oxide) (PEO) moieties of a non-ionic surfactant (Nonidet) adsorbed on small SPVS particles and the indigenous surfactant (protein–lipid) on a large NR particle. The value of zeta potential of heterocoagulated particle and the better oil resistance of films casted from the composite latex when compared to that of the NR film revealed the NR/SPVS core–shell structure.     

Clay-based colloidosomes

Poly(ethylene imine) (PEI) has been adsorbed onto the surface of Laponite clay nanoparticles from aqueous solution at pH 9 in order to produce an efficient hybrid Pickering emulsifier. This facile protocol allows formation of stable sunflower oil-in-water Pickering emulsions via homogenization at 12,000 rpm for 2 min at 20 °C. The effect of varying the extent of PEI adsorption on the Pickering emulsifier performance of the surface-modified Laponite is investigated for five oils of varying polarity using aqueous electrophoresis, thermogravimetric analysis, and laser diffraction studies. A minimum volume-average emulsion droplet diameter of around 60 μm was achieved at a Laponite concentration of 0.50% by mass when utilizing a PEI/Laponite mass ratio of 0.50. Such emulsions proved to be very stable toward droplet coalescence over time scales of months, although creaming is observed on standing within days due to the relatively large droplet size. These conditions correspond to submonolayer coverage of the Laponite particles by the PEI, which ensures that there is little or no excess PEI remaining in the aqueous continuous phase. This situation is confirmed by visual inspection of the underlying aqueous phase of the creamed emulsion when using fluorescently labeled PEI. These Pickering emulsions are readily converted into novel clay-based colloidosomes via reaction of the primary and/or secondary amine groups on the PEI chains adsorbed at the Laponite surface with either oil-soluble poly(propylene glycol) diglycidyl ether or water-soluble poly(ethylene glycol) diglycidyl ether cross-linkers. These colloidosomes were sufficiently robust to survive the removal of the internal oil phase after washing with excess alcohol, as judged by both optical and fluorescence microscopy. However, dye release studies conducted with clay-based colloidosomes suggest that these microcapsules are highly permeable and hence do not provide an effective barrier for retarding the release of small molecules.     

Effect of the Shell Crosslinking Level andCore/Shell Ratio on the Morphology of LatexParticles in the Preparation of Hollow Latexes简

Three-layer core/shell latex particles with various shell crosslinking level and shell thickness were prepared by multistep emulsion polymerization, and the hollow latex particles with different morphologies were then obtained after alkali post-treatment. Influences of divinyl benzene(DVB) content and the core/shell mass ratio on emulsion polymerization and particle morphology were investigated. Results showed that with the increase of DVB content, the percentage of total amount of ―COOH on the particle surface and free in aqueous phase(PSFa) decreased, and the morphology of the post-treated particles underwent evolution from cracked, intact hollow to deficient swelling structure. Decreasing the core/shell mass ratio could not only make more carboxyl groups encapsulated by the shell, but also increase the shell resistance to the swelling of the core. The uniform hollow latex particles with intact morphology were obtained when the DVB content was 3.54 wt% and the core/shell mass ratio was 1/6.     

Bifunctional Submicron Colloidosomes Coassembled from Fluorescent and Superparamagnetic Nanoparticles

Colloidosomes are microcapsules consisting of nanoparticle shells. These microcarriers can be self‐assembled from a wide range of colloidal particles with selective chemical, physical, and morphological properties and show promise for application in the field of theranostic nanomedicine. Previous studies have mainly focused on fairly large colloidosomes (>1 μm) based on a single kind of particle; however, the intrinsic building‐block nature of this microcarrier has not been exploited so far for the introduction of tailored functionality at the nanoscale. We report a synthetic route based on interfacial shear rheology studies that allows the simultaneous incorporation of different nanoparticles with distinct physical properties, that is, superparamagnetic iron oxide and fluorescent silica nanoparticles, in a single submicron colloidosome. These tailor‐made microcapsules can potentially be used in various biomedical applications, including magnetic hyperthermia, magnetic particle imaging, drug targeting, and bioimaging.